Search PubMed⌕ Search

SEARCH · Search PubMed

Results for “Polyhydroxybutyrates”

Search indexed PubMed citations on genomics, clinical trials, systematic reviews and public health. Explore titles, authors and supplied subject terms, then open the PubMed record.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 361 records · Page 20Linked to original sources
PubMed2006

Biocompatibility and biodegradation of novel PHB porous substrates with controlled multi-pore size by emulsion templates method.

PHB porous substrates were prepared based on the mono-membrane fabricated by emulsion templates method. The key factors of the method affecting the pore size and porosity of the PHB porous substrates were studied. The surface of PHB porous substrates were investigated by scanning electron microscope (SEM), which showed the even pore size and regular arranged pore. The transect of the PHB porous substrates prepared using the templates method was good. Moreover, the effects of variation of surfactant content (P%) and water content (R) on the pore size and porosity of PHB films were discussed. Preliminary studies showed that when P% is less than 20%, the pore size made by emulsion templates ranged from 5 microm to 30 microm with the value of P increasing. As P% is up to 20%. It was interesting to see that the porous substrates had muti-pore size distribution, i.e., median pore sizes were about 5 microm and inside the wall of pore, there existed numerous micro-pores size can be controlled from 100 nm to 500 nm only by adjusting the parameter R of the microemulsion. The cell-compatibility was evaluated via Chinese Hamster Lung (CHL) fibroblast cultivation in vitro. The Cells were cultured on both the mono-pore size membrane prepared by emulsion templates and the multi-pore size membrane prepared by microemulsion templates. It can be seen that the cells cultured on multi-pore size membrane stretched their morphology and proliferated better than that of mono-pore size membrane. These results indicated that the multi-pore size membrane had better cell-compatibility and was more suitable for tissue engineering. The degradation experiment indicated that the degradation of PHB porous substrates were accelerated by enzyme in vitro and the porous configuration was favorable to its degradation.

Absorbable Implants↗
PubMed1992

Transport of poly-beta-hydroxybutyrate in human plasma.

Poly-beta-hydroxybutyrate (PHB) is an amphiphilic lipid that has been found to be a ubiquitous component of the cellular membranes of bacteria, plants and animals. The distribution of PHB in human plasma was investigated using chemical and immunological methods. PHB concentrations proved highly variable; in a random group of 24 blood donors, total plasma PHB ranged from 0.60 to 18.2 mg/l, with a mean of 3.5 mg/l. In plasma separated by density gradient ultracentrifugation, lipoproteins carried 20-30% of total plasma PHB; 6-14% in the very low density lipoproteins (VLDL), 8-16% in the low density lipoproteins (LDL), and less than 3% in the high density lipoproteins (HDL). The majority of plasma PHB (70-80%) was found in protein fractions of density greater than 1.22 g/ml. Western blot analysis of the high density fractions with anti-PHB F(ab')2 identified albumin as the major PHB-binding protein. The affinity of albumin for PHB was confirmed by in vitro studies which demonstrated transfer of 14C-PHB from chloroform into aqueous solutions of human and bovine serum albumins. PHB was less tightly bound to LDL than to other plasma components; the polymer could be isolated from LDL by extraction with chloroform, or by digestion with alkaline hypochlorite, but it could not similarly be recovered from VLDL or albumin. PHB in the LDL correlated positively with total plasma cholesterol and LDL cholesterol, and negatively with HDL cholesterol. The wide concentration range of PHB in plasma, its presence in VLDL and LDL and absence in HDL, coupled with its physical properties, suggest it may have important physiological effects.

Binding Sites↗
PubMed1995

Determination of the aerobic biodegradability of polymeric material in a laboratory controlled composting test.

A laboratory method is presented for investigating the biodegradation of an organic test material in an aerobic composting system based on the evolution of carbon dioxide. In addition to carbon conversion, biodegradation can also be monitored through weight loss and physical disintegration. The test method is different from other biodegradation tests, especially aquatic tests, because of the elevated temperature representative for real composting conditions and also because of enhanced fungal degradation activities. A ring test was run using paper and poly-beta-hydroxybutyrate/valerate as test materials and cellulose powder as a reference material. The test results and the experience gained by the participants showed that the method is suitable and practicable. Experience with real technical-scale composting facilities confirms that the method provides test results of high predictive value. The test is designed to become a European Standard in connection with determining the compostability of packagings and packaging materials.

Bacteria, Aerobic↗
PubMed1989

Ability of the phototrophic bacterium Rhodospirillum rubrum to produce various poly (beta-hydroxyalkanoates): potential sources for biodegradable polyesters.

Studies have been carried out in order to optimize growth and culture conditions for the intracellular formation of poly(beta-hydroxyalkanoates) (PHA) in the phototrophic, purple, non-sulphur bacterium Rhodospirilum rubrum. Its potential to produce novel copolymers was investigated. Recently, it has become of industrial interest to evaluate these polyesters as potentially biodegradable plastics for a wide range of possible applications. On an industrial scale, the use of photosynthetic bacteria could harness sunlight as an energy source for the production of these materials. R. rubrum was grown anaerobically in the light on different linear and branched beta-hydroxycarboxylic acids and various n-alkanoic acids. Under nitrogen-limiting conditions a PHA content of up to 45% of cellular dry weight was detected. When R. rubrum was grown on different concentrations of various n-alkanoic acids, intracellular PHA production was detected on all acids used. In most of the cases, the storage polymer contained beta-hydroxybutyrate (HB) and beta-hydroxyvalerate (HV) monomer units. Grown on n-alkanoic acids with a chain length of four carbon atoms and more, R. rubrum produced a copolymer containing the beta-hydroxyhexanoate (HC) repeating unit in addition to the HB and HV monomer. Using beta-hydroxyheptanoic acid as the carbon source, a polyester which contained HB, HV, HC, and beta-hydroxyheptanoate was formed. These copolyesters represent a novel class of biodegradable thermoplastics. The results demonstrate the metabolic flexibility of R. rubrum to form many different types of polyesters which might substitute plastics synthesized from petrochemicals.

Ammonia↗
PubMed1990

Evidence for microbial polysaccharide preparations containing polyester substituents.

CPMAS 13C-n.m.r. spectroscopy was employed to characterize the composition and solid phase morphology of gellan, welan, rhamsan and NW11. Spectra indicated that commercial preparations of these polysaccharides, which share a similar molecular backbone, contain a non-carbohydrate component exhibiting four inequivalent carbon atoms. Isolation of this component, followed by 13C-n.m.r. in CHCl3 and MS analysis, revealed its structure to be poly(beta-hydroxybutyrate). Evidence is presented which suggests that this polyester may be a covalent adduct to the above polysaccharides, although this cannot be unambiguously determined at this time. Further experimentation is in progress.

Hydroxybutyrates↗
PubMed1990

Biosynthesis and composition of bacterial poly(hydroxyalkanoates).

It is well established that Alcaligenes eutrophus can accumulate a copolymer containing 3-hydroxybutyrate and 3-hydroxyvalerate, but longer 3-hydroxyacid monomers have not been reported to occur in this organism. The properties of the enzymes of poly(hydroxyalkanoate) (PHA) biosynthesis are discussed and it is proposed that the substrate specificity of the polymerizing enzyme restricts the range of monomer units incorporated into PHA. Various other bacteria produce similar copolymers from propionic acid and/or valeric acid. A number of Pseudomonas species accumulate PHAs containing longer-chain monomer units from linear alkanoic acids, alkanes and alcohols.

Alcaligenes↗
PubMed1990

Biosynthesis and characterization of poly(3-hydroxybutyrate-co-4-hydroxybutyrate) in Alcaligenes eutrophus.

Copolyesters of 3-hydroxybutyrate (3HB) and 4-hydroxybutyrate (4HB) were produced by Alcaligenes eutrophus at 30 degrees C in nitrogen-free culture solutions containing gamma-butyrolactone alone or with fructose or butyric acid as the carbon sources. When gamma-butyrolactone was used as the sole carbon source, the 4HB fraction in copolyester increased from 9 to 21 mol% as the concentration of gamma-butyrolactone in the culture solution increased from 10 to 25 g/l. The addition of fructose to the culture solution of gamma-butyrolactone resulted in a decrease in the 4HB fraction in copolyester. The copolyesters produced from gamma-butyrolactone and fructose by A. eutrophus were shown to have random sequence distribution of 3HB and 4HB units by analysis of the 125 MHz 13C n.m.r. spectra. In contrast, a mixture of random copolyesters with two different 4HB fractions was produced by A. eutrophus when gamma-butyrolactone and butyric acid were used as the carbon sources. These results are discussed on the basis of a proposed biosynthetic pathway of P(3HB-co-4HB). The copolyester films became soft with an increase in the 4HB fraction, and the elongation to break at 23 degrees C increased from 5 to 444% as the 4HB fraction increased from 0 to 16 mol%. The P(3HB-co-10% 4HB) film was shown to be biodegradable in an activated sludge.

Alcaligenes↗
PubMed1990

Viscoelastic relaxations and thermal properties of bacterial poly(3-hydroxybutyrate-co-3-hydroxyvalerate) and poly(3-hydroxybutyrate-co-4-hydroxybutyrate).

3-Hydroxybutyrate-3-hydroxyvalerate (3HB-3HV) as well as 3-hydroxybutyrate-4-hydroxybutyrate (3HB-4HB) copolyesters have been investigated by differential scanning calorimetry, thermogravimetric analysis and dynamic mechanical spectroscopy, over a wide range of compositions (0-95 mol% 3HV; 0-82 mol% 4HB). Both series of isolated copolyesters are partially crystalline at all compositions. Quenched samples show a glass transition that decreases linearly with increasing co-monomer molar fraction, more markedly when the co-monomer is 4HB. Above Tg, all copolyesters, rich in 3HB units, show a cold crystallization phenomenon followed by melting, while at the other end crystallization on heating is observed only in 3HB-3HV copolymers. The viscoelastic spectrum, strongly affected by thermal history, shows two relaxation regions: the glass transition, whose location depends on copolymer type and composition, and a secondary dispersion region at low temperatures (-130/-80 degrees C). The latter results from a water-related relaxation analogous to that of P(3HB) and, in 3HB-4HB copolymers, from another overlapping absorption peak centered at -130 degrees C, attributed to local motion of the methylene groups in the linear 4HB units.

Calorimetry, Differential Scanning↗
PubMed1991

Accumulation of a poly(hydroxyalkanoate) copolymer containing primarily 3-hydroxyvalerate from simple carbohydrate substrates by Rhodococcus sp. NCIMB 40126.

A number of taxonomically-related bacteria have been identified which accumulate poly(hydroxyalkanoate) (PHA) copolymers containing primarily 3-hydroxyvalerate (3HV) monomer units from a range of unrelated single carbon sources. One of these, Rhodococcus sp. NCIMB 40126, was further investigated and shown to produce a copolymer containing 75 mol% 3HV and 25 mol% 3-hydroxybutyrate (3HB) from glucose as sole carbon source. Polyesters containing both 3HV and 3HB monomer units, together with 4-hydroxybutyrate (4HB), 5-hydroxyvalerate (5HV) or 3-hydroxyhexanoate (3HHx), were also produced by this organism from certain accumulation substrates. With valeric acid as substrate, almost pure (99 mol% 3HV) poly(3-hydroxyvalerate) was produced. N.m.r. analysis confirmed the composition of these polyesters. The thermal properties and molecular weight of the copolymer produced from glucose were comparable to those of PHB produced by Alcaligenes eutrophus.

Glucose↗
PubMed1992

Biosynthesis and n.m.r. studies of deuterated poly(3-hydroxybutyrate) produced by Alcaligenes eutrophus H16.

Alcaligenes eutrophus H16 was grown on mixtures of 1H- and 2H-acetate as carbon sources. The accumulation of deuterated poly(3-hydroxybutyrate) (P(3HB)) was observed. The deuterium distributions in the isolated P(3HB)s were determined from 1H and 2H-n.m.r. spectra and confirmed by 13C-n.m.r. spectra. Although one would expect to synthesize P([2,2,4,4,4-2H5]3HB) when the cells were grown on 2H-acetate as the sole carbon source, the methyl, methylene and methine groups of the P(3HB) contained both deuterium and proton. This observation indicates some substitution from 2H to 1H during the P(3HB) synthesis. The 2H content in the methyl groups was larger than that in the methylene groups, which suggests a kinetic isotope effect in the P(3HB) synthesizing process. The deuterium distributions in the two magnetically non-equivalent methylene protons were determined to be different, which indicates stereoselectivity at the C2 site.

Alcaligenes↗
PubMed1993

Enzymatic degradation of poly(hydroxyalkanoates) by Pseudomonas pickettii.

A bacterium capable of degrading poly(3-hydroxybutyrate) [P(3HB)] was isolated from laboratory media and identified as Pseudomonas pickettii. The strain P. pickettii excreted an extracellular poly(hydroxyalkanoate) (PHA) depolymerase and grew on P(3HB) as the sole carbon source. P. pickettii also grew on 3-hydroxybutyrate, glucose, fructose, citrate or succinate. However, only 3-hydroxybutyrate apart from P(3HB) induced the secretion of PHA depolymerase. The PHA depolymerase was purified from the culture medium containing 3-hydroxybutyrate at the sole carbon source by hydrophobic column chromatography and gel filtration, and its molecular weight was determined as about 40,000 by polyacrylamide gel electrophoresis in the presence of sodium dodecyl sulphate. The optimum activity of degrading P(3HB) by the depolymerase was observed at pH 5.5 and 40 degrees C. The enzymatic degradation of microbial copolyesters was studied by the weight loss (erosion) of solution-cast films of poly(3-hydroxybutyrate-co-3-hydroxyvalerate) and poly(3-hydroxybutyrate-co-4-hydroxybutyrate). 1H-n.m.r. analysis of the water-soluble products after the hydrolysis of P(3HB) film by PHA depolymerase revealed that the main product was the monomer 3-hydroxybutyric acid.

Bacterial Proteins↗
PubMed1993

Kinetics and mechanism of heterogeneous hydrolysis of poly[(R)-3-hydroxybutyrate] film by PHA depolymerases.

The kinetics and mechanism of enzymatic degradation on the surface of poly[(R)-3-hydroxybutyrate] (P[(R)-3HB]) film have been studied using three types of extracellular poly(hydroxyalkanoate) (PHA) depolymerases from Alcaligenes faecalis, Pseudomonas picketti and Comamonas testosteroni. The monomer and dimer of 3-hydroxybutyric acid were produced during the course of the enzymatic degradation of P[(R)-3HB] film, and the rate of production was determined by monitoring the increase in absorbance at 210 nm on a spectrophotometer. The rate of enzymatic degradation increased to a maximum value with the concentration of PHA depolymerase, followed by a gradual decrease. The kinetic data were accounted for in terms of a heterogeneous enzymatic reaction, involving enzymatic degradation on the surface of P[(R)-3HB] film via two steps of adsorption and hydrolysis by a PHA depolymerase with binding and catalytic domains. The kinetic results suggest that the properties of the catalytic domains are very similar among the three PHA depolymerases, but that those of the binding domains are strongly dependent on the type of depolymerase.

Alcaligenes↗
PubMed1994

Nuclear magnetic resonance relaxation studies of poly(hydroxybutyrate) in whole cells and in artificial granules.

The physical state of poly(hydroxybutyrate) (PHB) in whole cells and in the form of artificial biomimetic granules has been probed using 13C nuclear magnetic resonance (NMR) spectroscopy. Studies on varying concentrations of whole cells of Alcaligenes eutrophus show that changes in the line widths of PHB in whole cells do not correlate with changes in transverse relaxation times. Solid-state magic-angle spinning NMR studies demonstrate that the line broadening results from a reduction in the static field homogeneity rather than from intrinsic properties of the PHB within the cells. Transverse and longitudinal relaxation times of PHB in whole cells and in artificial granules are similar, indicating similarities in structure and mobility.

Alcaligenes↗
PubMed1995

Synthesis of high-molecular-weight poly([R]-(-)-3-hydroxybutyrate) in transgenic Arabidopsis thaliana plant cells.

High-molecular-weight poly([R]-(-)-3-hydroxybutyrate) (PHB), a biodegradable thermoplastic, was produced from a suspension culture of transgenic Arabidopsis thaliana plant cells expressing two genes from the bacterium Alcaligenes eutrophus involved in the synthesis of PHB. The molecular structure of the plant-produced polymer was analysed by gas chromatography, mass spectrometry, proton nuclear magnetic resonance spectroscopy, infra-red spectroscopy, spectropolarimetry, differential scanning calorimetry, X-ray diffraction and size exclusion chromatography. The results indicate that the polymer from transgenic plants appears to have a chemical structure identical to that of PHB produced by bacteria. However, the molecular weight distribution of the plant-produced PHB was much broader than that of typical bacterial PHB.

Alcaligenes↗
PubMed1996

Adsorption kinetics of bacterial PHB depolymerase on the surface of polyhydroxyalkanoate films.

The kinetics of adsorption and hydrolysis by an extracellular PHB depolymerase from Alcaligenes faecalis were studied at 37 degrees C on the surface of five types of polyhydroxyalkanoate (PHA) films. The films of poly[(R)-3-hydroxybutyrate] (P(3HP)), poly(3-hydroxypropionate) (P(3HP)), and poly(4-hydroxybutyrate)(P(4HB)) were hydrolyzed by the enzyme, while the films of poly[(S)-2-hydroxypropionate)(P(2HP)) and poly(6-hydroxyhexanoate)(P(6HH)) were not eroded. The PHB depolymerase with binding and catalytic domains adsorbed on the surface of all PHA films used, and the adsorption kinetics were found to obey the Langmuir isotherm. The cross-area per one molecule of enzyme binding to the surface of PHA film was estimated to be 17 +/- 8 (nm2/molecule). It has been concluded that the binding domain of enzyme is non-specific for the binding to the surface of PHA film, while the active site in a catalytic domain is specific for the hydrolysis of PHA molecules.

Adsorption↗
PubMed1996

Production of heteropolymeric polyhydroxyalkanoate in Escherichia coli from a single carbon source.

Poly[beta-hydroxybutyrate-co-beta-hydroxyvalerate] co-polymer, PHBV, is a polyhydroxyalkanoate (PHA) that has greater utility as a biodegradable thermoplastic polyester than poly-beta-hydroxybutyrate, PHB. In order to produce PHBV, a system of pathways is required to produce both hydroxybutyrate (HB) and hydroxyvalerate (HV) monomers from the sources of carbon. A working model for conversion of glucose to PHBV via acetyl- and propionyl-coenzyme A was constructed by expressing the PHA biosynthesis genes from Alcaligenes eutrophus in Escherichia coli strain K-12 under novel growth conditions. When 1 mM valine was added to 1% glucose medium, growth ceased and up to 2.5% of the incorporated monomers were HV; up to 4% were HV when 1 mM threonine was added as well. Threonine dehydratase (TD) converts threonine to alpha-ketobutyrate; TD is required for HV to be incorporated into PHA unless its transaminated reaction product, alpha-aminobutyrate, is added to the medium. Intracellular alpha-ketobutyrate accumulates when valine is added to the medium because valine, which cannot be metabolized to HV by E. coli strain K-12, stimulates TD and inhibits acetolactate synthase. In turn, alpha-ketobutyrate is converted to propionyl-CoA by the E. coli pyruvate dehydrogenase complex. This constitutes a defined system of pathways for synthesis of a heteropolymeric PHA from a single carbon source, which in the future could be transferred to other organisms including plants.

Acyl Coenzyme A↗
PubMed1987

On the biodegradation of poly-beta-hydroxybutyrate (PHB) homopolymer and poly-beta-hydroxybutyrate-hydroxyvalerate copolymers.

The known biodegradability of PHB in certain biological environments has led to its proposed use as a 'biodegradable' implant material. Monofilaments of PHB homopolymer and two PHV-PHB copolymers have been studied in vivo and in vitro and assessed for changes in mechanical properties and topography. In vivo biodegradation was only observed with PHB when pre-degraded by 10.0 Mrad of gamma-irradiation before implantation. High temperature in vitro hydrolysis suggested that PHV copolymer additions retarded the rate of degradation of PHB. Hydration reactions had most effect on the ultimate tensile properties of the materials. In contrast, the elastic properties appeared to be relatively unaffected.

Animals↗