Search PubMed⌕ Search

SEARCH · Search PubMed

Results for “Periodontal Splints”

Search indexed PubMed citations on genomics, clinical trials, systematic reviews and public health. Explore titles, authors and supplied subject terms, then open the PubMed record.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 361 records · Page 20Linked to original sources

Repair process of external root resorption subsequent to palatal expansion treatment.

The repair process of external root resorption (ERR) and the role of retention mechanics in enhancing ERR repair were studied on eight Macaca fascicularis monkeys that were divided equally into short- and long-term groups. Six monkeys received palatal expansion appliances, and two received sham appliances. The short-term group received active treatment. The long-term group received additional retention (4 months) and relapse (2 months) treatment periods with biweekly injections of individual vital dye per phase, i.e., procion red H-8B and violet H-3R (80 mg/kg B.W.), respectively. Histomorphologic examinations included scanning electron microscopy, light, and ultraviolet microscopy. The short-term group demonstrated penetrated resorption with pulp exposure at sites with initial deficiency of the protecting odontoblastic layer (apical zone, nutrition canal). The long-term group showed two forms of ERR repair: (1) Nonfunctional retarded repair cementum, comprised of overlapped incremental lines and deprived of extrinsic fibers, was delineated in severe pulp exposure. The pulp/dentin complex showed intense incorporation of procion dye in the dentinal tubuli, conceivably related to a defense response in the form of sclerotic dentin. (2) Functional rapid repair cementum, comprised of discriminated incremental lines mainly of mixed cellular cementum, with a consistent pattern of five sequential phases: the lag phase (14 to 28 days), the incipient phase (14 days), the peak phase (14 to 28 days), the steady phase (42 to 56 days) and the retreating phase (70 days). Sharpey's fibers at functional ERR sites were scarce, never emerging from the dentinocemental junction, and not developing into principal fibers. The pulp/dentin complex showed an increase in pulp stones but no formation of tertiary dentin. The apical area responded by hypercementosis in the form of apical occlusion and a displaced pulp canal. The application of a fixed retention device is recommended in light of accelerated apposition of repair cementum during the retention period. However, increased formation of Sharpey's fibers during the relapse period might suggest a restricted duration in splinting therapy.

Animals↗

A study of forces originating from orthodontic appliances for splinting of teeth.

Management of dental trauma in children sometimes requires the use of a dental splint. This can be constructed with composite materials, kevlar, fiberglass, wire and composite or orthodontic wires and brackets. However, there have been no studies of the control of dental movement when orthodontic materials are used for a dental splint. The purpose of this study was to determine the forces exerted by an orthodontic appliance used as a dental splint. To measure such forces, a transducer with a detection of 0.01 N (+/- 5%) was inserted into a maxillary dental arch model. The results showed that the orthodontic wire was rarely passive and the forces developed ranged from 0 to 27 x 10(-2) N. The force developed was independent of the length of the dental splint (p < 0.05) and wire size (p < 0.05). The mean force developed by nickel-titanium wires (14.27 x 10(-2) N) was significantly greater (p < 0.05) than the mean force developed by stainless steel and cobalt-chromium wires. Moreover, the mean force developed by rectangular wires (12.07 x 10(-2) N) was significantly greater (p < 0.05) than the mean force developed by square and round wires. The results suggested that stainless steel or cobalt-chromium, square or round wires should be used for construction of a dental splint.

Analysis of Variance↗

Backscattering from dental restorations and splint materials during therapeutic radiation.

Models were constructed to simulate as closely as possible the human oral cavity. Radiation absorbed doses were determined for controls and various test situations involving the presence of dental restorative and splint materials during cobalt-60 irradiation of the models. Adjacent gold full crowns and adjacent solid dental silver amalgam cores both increased the dose to the interproximal gingivae by 20%. Use of orthodontic full bands for splinting the jaws increased the dose to the buccal tissues by an average of 10%. Augmentation of dose through backscatter radiation was determined to be only slight for intracoronal amalgam fillings and stainless steel or plastic bracket splints.

Crowns↗

Influence of occlusal stabilization splint on the asymmetric activity of masticatory muscles in patients with temporomandibular dysfunction.

The aim of present study was to evaluate the symmetry of masticatory muscles' activity at various clenching levels in the intercuspal position in patients with functional disorders and in healthy subjects. The purpose was also to determine the effect of full-arch maxillary stabilization splint on the asymmetry of masticatory muscle activity in patients with temporomandibular dysfunction. In this study 6 TMD patients and 12 healthy subjects were investigated. Surface EMG recordings were obtained from left and right anterior temporal, left and right masseter and from the sub-mandibular group in the region of the anterior belly of the digastric muscle on the left and right side during clenching with the maximum 100% voluntary contraction (MVC) as well as during clenching at 50% and 25% of the maximum activity in the position of maximal intercuspation of teeth. In order to quantify asymmetrical masticatory muscle activity, the asymmetry index (AI) was calculated for each subject and for each muscle from the average anterior temporal, masseter and digastric potentials recorded during each test (100% MVC, 50% MVC and 25% MVC). In the group of patients EMG recordings were repeated during and after the splint therapy. The asymmetries of masticatory muscle activity was present in both groups, but in the group of TMD patients the asymmetry indices for anterior temporal muscle at 100% MVC (p = 0.049) and 50% MVC (p = 0.031) were significantly higher. Results have shown that the use of splint suppressed the asymmetry of all muscles, as during the splint therapy the asymmetry indices were lowered. After the therapy, the level of temporal muscle symmetry during submaximal clenching in the intercuspal position increased significantly (p = 0.046). This investigation points out that electromyography may be a valuable method of documenting that asymmetric activity of masticatory muscles improves after occlusal splint therapy in patients with TMD.

Adult↗

Guidelines for splinting implants.

STATEMENT OF PROBLEM: Teeth and implants have different mobility patterns. Thus, it has been believed that implant-supported restorations should not be connected to natural teeth. However, this is not always the case. PURPOSE: This article presents guidelines for connection of restorative components when implant abutments and natural teeth are involved. METHODS: Methods of connection are discussed. CONCLUSION: This article presents options for splinting of prosthetic components.

Clinical Protocols↗

[Wire/composite splinting of traumatically injured permanent teeth].

For splinting traumatically loosened and/or reimplanter remaining front teeth wire splints are used which are fixed by means of composite substance, gluing technique. Kinds of employed splints are disclosed and the steps of the practical carrying out of splinting are described. Indications, advantages and disadvantages of its employment are discussed.

Adolescent↗

[A fragmented ribbon splint for the treatment of tooth dislocations].

A simple, reliable, and easy-to-make splint is proposed for immobilization of the dislocated upper and lower incisors. The splint does not prevent correct occlusion, is hygienic and atraumatic. The process of immobilization of the dislocated tooth is accelerated if half-products are available. The splint consists of processes for fixation and the part fixing the tooth, its vestibular part involves the palatal surface of the tooth and is finished with an occlusion pad. The splint is fixed with bronze-aluminium wire to 2-3 healthy teeth on both sides of the dislocated tooth.

Equipment Design↗

Treatment and prognosis of a vertically fractured maxillary molar with widely separated segments: a case report.

This is a report of the treatment and prognosis of a maxillary second molar exhibiting a complete vertical crown-root fracture. The buccal and palatal segments were widely separated by as much as 2 mm and were immobile. To restore this tooth, it was essential to bring the segments into close apposition. This was accomplished by application of orthodontic elastics to the tooth crown in combination with a wire splint. After approximately 1 month of continuous use of the orthodontic elastics, the dislodged segments were suitably repositioned close to their original positions. The tooth was then endodontically treated and restored with a cast complete crown. The restored tooth has been functioning well, with periodic periodontal maintenance, for more than 3.5 years, indicating a promising prognosis.

Adult↗

Intracoronal esthetic splinting.

Splinting is a well-accepted clinical treatment that has been us many years to control irreversible tooth mobilities through mechanical stabilization. With contemporary demands for quality-of-life dentistry, extracoronal or unesthetic splints can fall short of patient expectations. This article examines the rationale and technique for placing an intracoronal esthetic splint when full coverage restorations are no indicated or desired. This type of splint using bondable ceramic ropes is imperceptible both visually and to the patient's tongue, lips, and cheeks proprioceptively.

Aged↗

Effect of splinting and interproximal contact tightness on load transfer by implant restorations.

STATEMENT OF PROBLEM: To circumvent the difficulty of achieving a passive framework fit, some authors have suggested that multiple adjacent implants be restored individually. This protocol requires that each unit be able to withstand mastication forces. Non-splinted restorations have numerous interproximal contacts that require adjustments prior to placement, with an unknown outcome relative to load transfer. PURPOSE: This in vitro simulation study examined the effect of splinting and interproximal contact tightness on passivity of fit and the load transfer characteristics of implant restorations. MATERIAL AND METHODS: A photoelastic model of a human partially edentulous left mandible with 3 screw-type implants (3.75 x 10 mm) was fabricated. For non-splinted restorations, individual crowns were fabricated on 3 custom-milled titanium abutments. After the units were cemented, 5 levels of interproximal contact tightness were evaluated: open, ideal (8 microm shim stock drags without tearing), light (ideal +10 microm), medium (ideal + 50 microm), and heavy (ideal + 90 microm). For splinted restorations, five 3-unit fixed partial dentures were fabricated, internally adjusted with silicone disclosing material, and cemented to the model. Changes in stress distribution under simulated non-loaded and loaded conditions (6.8 kg) were analyzed with a polariscope. RESULTS: In the simulated alveolar structures, non-splinted restorations with heavier interproximal contacts were associated with increased tensile stresses between implants; occlusal loads tended to concentrate around the specific loaded implant. Splinted restorations shared the occlusal loads and distributed the stresses more evenly between the implants when force was applied. The load-sharing effect was most evident on the center implant but also was seen on the terminal abutments of the splinted restorations. CONCLUSION: The results of this in vitro study suggest that excessive contact tightness between individual crowns can lead to a non-passive situation. In this experiment, splinted restorations exhibited better load sharing than non-splinted restorations.

Birefringence↗

[Current splinting methods in dentistry. I].

Even in the ancient age there was an ambition to fix loose teeth. From the 1950s almost the same materials were used for splinting like today. A real breakthrough happened with the introduction of the etching method and the development of better composites as well as fiber-reinforced materials. In this paper the authors give a review of literature and their experience about the fiber-reinforced composites (FRC). Properties and use of the fiber-reinforced composites are presented, and suggestions are given how to apply the different materials for splinting, orthodontic retentive treatment, fixing traumatised mobile teeth, or temporary and long-distance provisional and permanent prostheses.

Acrylic Resins↗

[The use of miniature plastic splints in dentistry].

The use of the miniature plastic splint, manufactured by means of deep-drawing, is illustrated by some examples: immobilization of subluxated teeth, treatment of fractures in the maxillofacial region, wound protection.

Alveolar Process↗

Intracoronal incisal splint.

An intracoronal incisal splint for the stabilization of mobile anterior teeth is described. Advantages of the technique are good esthetics, open embrasures and no disturbance of occlusion.

Dental Enamel↗

Effect of periodic tooth displacement on healing of experimental furcation defects in dogs.

This study compared the healing response, following reconstructive surgery, between teeth subjected to periodic displacement and teeth which were splinted during the postoperative healing period. Through-and-through furcation defects were created in the mandibular second, third, and fourth premolars of 6 beagle dogs. Bone was surgically removed from the furcation and around each root to 3 different levels: 3, 6, and 9 mm. Reconstructive surgery included demineralization of the root surface and coronally positioned flaps. During the postoperative healing period, the premolars on one side were subjected to periodic mesio-distal displacement by orthodontic elastics attached to splints. Corresponding teeth on the contralateral side were splinted to serve as non-mobile controls. The results demonstrated that reattachment occurred in 12 of 14 displaced teeth and in 14 of 16 splinted teeth. There was no difference in the amount of interradicular bone fill or frequency of ankylosis between displaced and splinted teeth. Our findings indicate that the healing response was not affected by tooth displacement in this dog furcation model.

Alveolar Process↗

Tooth replantation after traumatic avulsion: a 27-year follow up.

This report presents a case of replantation of a traumatically avulsed central incisor in a 32-year-old woman. The tooth was replanted after a 30-min extra-alveolar period. Emergency unconventional immobilization was performed, using 2-0 chromic gut, and a restorative composite made Gunning-type splint. The tooth is still in place 27 years after replantation (1976 to date) without marked resorption.

Adult↗

Management of a root fracture in an immature permanent tooth.

A 9-year-old girl with trauma to the maxillary right permanent central incisor is reported. Clinically the tooth appeared extruded with one third of the root visible. The radiographic examination revealed a root fracture. The extruded tooth was repositioned and splinted with a heavy wire and adhesive resin, after which a resorbable collagen tissue was placed to cover the buccal region. Subsequent to the injury, swelling was observed and the patient complained of pressure pain in the periapical region of the tooth with no response to electric pulp testing. It was treated successfully with periodontal therapy and endodontic therapy with Vitapex.

Calcium Hydroxide↗

A fused central incisor. Periodontal considerations in comprehensive treatment.

This report details the treatment of a permanent central incisor fused to a supernumerary tooth. The level of fusion was first determined by radiographs, but surgical visibility indicated a more extensive fusion. The two roots were separated, and the supernumerary tooth was removed. At 10 weeks postoperatively, orthodontic treatment was instituted, bringing the retained tooth through the healing socket left by the supernumerary, and into contact with the interdental septum. After endodontic treatment and splinting, a periodontal re-entry procedure was necessitated by the persistence of inflammation caused by incomplete removal of the furcation-like area between the fused teeth. The improved periodontal prognosis of this case at 1-year follow-up can be attributed to careful postsurgical evaluation and subsequent removal of this plaque-retentive area.

Child↗