Search PubMed⌕ Search

SEARCH · Search PubMed

Results for “Optical Devices”

Search indexed PubMed citations on genomics, clinical trials, systematic reviews and public health. Explore titles, authors and supplied subject terms, then open the PubMed record.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 361 records · Page 20Linked to original sources
PubMed2000

Complete photonic bandgaps in 12-fold symmetric quasicrystals

Photonic crystals are attracting current interest for a variety of reasons, such as their ability to inhibit the spontaneous emission of light. This and related properties arise from the formation of photonic bandgaps, whereby multiple scattering of photons by lattices of periodically varying refractive indices acts to prevent the propagation of electromagnetic waves having certain wavelengths. One route to forming photonic crystals is to etch two-dimensional periodic lattices of vertical air holes into dielectric slab waveguides. Such structures can show complete photonic bandgaps, but only for large-diameter air holes in materials of high refractive index (such as gallium arsenide, n = 3.69), which unfortunately leads to significantly reduced optical transmission when combined with optical fibres of low refractive index. It has been suggested that quasicrystalline (rather than periodic) lattices can also possess photonic bandgaps. Here we demonstrate this concept experimentally and show that it enables complete photonic bandgaps--non-directional and for any polarization--to be realized with small air holes in silicon nitride (n = 2.02), and even glass (n = 1.45). These properties make photonic quasicrystals promising for application in a range of optical devices.

Journal Article↗
PubMed2003

Video-speed electronic paper based on electrowetting.

In recent years, a number of different technologies have been proposed for use in reflective displays. One of the most appealing applications of a reflective display is electronic paper, which combines the desirable viewing characteristics of conventional printed paper with the ability to manipulate the displayed information electronically. Electronic paper based on the electrophoretic motion of particles inside small capsules has been demonstrated and commercialized; but the response speed of such a system is rather slow, limited by the velocity of the particles. Recently, we have demonstrated that electrowetting is an attractive technology for the rapid manipulation of liquids on a micrometre scale. Here we show that electrowetting can also be used to form the basis of a reflective display that is significantly faster than electrophoretic displays, so that video content can be displayed. Our display principle utilizes the voltage-controlled movement of a coloured oil film adjacent to a white substrate. The reflectivity and contrast of our system approach those of paper. In addition, we demonstrate a colour concept, which is intrinsically four times brighter than reflective liquid-crystal displays and twice as bright as other emerging technologies. The principle of microfluidic motion at low voltages is applicable in a wide range of electro-optic devices.

Journal Article↗
PubMed2004

Ultra-large-scale syntheses of monodisperse nanocrystals.

The development of nanocrystals has been intensively pursued, not only for their fundamental scientific interest, but also for many technological applications. The synthesis of monodisperse nanocrystals (size variation <5%) is of key importance, because the properties of these nanocrystals depend strongly on their dimensions. For example, the colour sharpness of semiconductor nanocrystal-based optical devices is strongly dependent on the uniformity of the nanocrystals, and monodisperse magnetic nanocrystals are critical for the next-generation multi-terabit magnetic storage media. For these monodisperse nanocrystals to be used, an economical mass-production method needs to be developed. Unfortunately, however, in most syntheses reported so far, only sub-gram quantities of monodisperse nanocrystals were produced. Uniform-sized nanocrystals of CdSe (refs 10,11) and Au (refs 12,13) have been produced using colloidal chemical synthetic procedures. In addition, monodisperse magnetic nanocrystals such as Fe (refs 14,15), Co (refs 16-18), gamma-Fe(2)O(3) (refs 19,20), and Fe(3)O(4) (refs 21,22) have been synthesized by using various synthetic methods. Here, we report on the ultra-large-scale synthesis of monodisperse nanocrystals using inexpensive and non-toxic metal salts as reactants. We were able to synthesize as much as 40 g of monodisperse nanocrystals in a single reaction, without a size-sorting process. Moreover, the particle size could be controlled simply by varying the experimental conditions. The current synthetic procedure is very general and nanocrystals of many transition metal oxides were successfully synthesized using a very similar procedure.

Crystallization↗
PubMed2005

Morphology-tuned wurtzite-type ZnS nanobelts.

Nanometre-sized inorganic dots, wires and belts have a wide range of electrical and optical properties, and variable mechanical stability and phase-transition mechanisms that show a sensitive dependency on size, shape and structure. The optical properties of the semiconductor ZnS in wurtzite structures are considerably enhanced, but the lack of structural stability limits technological applications. Here, we demonstrate that morphology-tuned wurtzite ZnS nanobelts show a particular low-energy surface structure dominated by the +/-[210] surface facets. Experiments and calculations show that the morphology of ZnS nanobelts leads to a very high mechanical stability to approximately 6.8 GPa, and also results in an explosive mechanism for the wurtzite-to-sphalerite phase transformation together with in situ fracture of the nanobelts. ZnS wurtzite nanobelts provide a model that is useful not only for understanding the morphology-tuned stability and transformation mechanism, but also for improving synthesis of metastable nanobelts with quantum effects for electronic and optical devices.

Atmospheric Pressure↗
PubMed2006

Kinetically driven self assembly of highly ordered nanoparticle monolayers.

When a drop of a colloidal solution of nanoparticles dries on a surface, it leaves behind coffee-stain-like rings of material with lace-like patterns or clumps of particles in the interior. These non-uniform mass distributions are manifestations of far-from-equilibrium effects, such as fluid flows and solvent fluctuations during late-stage drying. However, recently a strikingly different drying regime promising highly uniform, long-range-ordered nanocrystal monolayers has been found. Here we make direct, real-time and real-space observations of nanocrystal self-assembly to reveal the mechanism. We show how the morphology of drop-deposited nanoparticle films is controlled by evaporation kinetics and particle interactions with the liquid-air interface. In the presence of an attractive particle-interface interaction, rapid early-stage evaporation dynamically produces a two-dimensional solution of nanoparticles at the liquid-air interface, from which nanoparticle islands nucleate and grow. This self-assembly mechanism produces monolayers with exceptional long-range ordering that are compact over macroscopic areas, despite the far-from-equilibrium evaporation process. This new drop-drying regime is simple, robust and scalable, is insensitive to the substrate material and topography, and has a strong preference for forming monolayer films. As such, it stands out as an excellent candidate for the fabrication of technologically important ultra thin film materials for sensors, optical devices and magnetic storage media.

Colloids↗
PubMed2006

Observation and tuning of hypersonic bandgaps in colloidal crystals.

Composite materials with periodic variations of density and/or sound velocities, so-called phononic crystals, can exhibit bandgaps where propagation of acoustic waves is forbidden. Phononic crystals are the elastic analogue of the well-established photonic crystals and show potential for manipulating the flow of elastic energy. So far, the experimental realization of phononic crystals has been restricted to macroscopic systems with sonic or ultrasonic bandgaps in the sub-MHz frequency range. In this work, using high-resolution Brillouin spectroscopy we report the first observation of a hypersonic bandgap in face-centred-cubic colloidal crystals formed by self-assembly of polystyrene nanoparticles with subsequent fluid infiltration. Depending on the particle size and the sound velocity in the infiltrated fluid, the frequency and the width of the gap can be tuned. Promising technological applications of hypersonic crystals, ranging from tunable filters and heat management to acousto-optical devices, are anticipated.

Journal Article↗
PubMed2006

A comparison of accommodation amplitudes in pseudophakic eyes measured with three different methods.

PURPOSE: To compare the accommodative amplitudes with three different methods in pseudophakic eyes with different types of intraocular lenses (IOLs). METHODS: Fifty-one pseudophakic eyes of 44 patients (age: 72.02+/-8.53 years) were studied. One of two different types of IOL were implanted (N=30, three-piece Alcon Acrysof MA60AC and N=21, one-piece Alcon Acrysof SA60AT) in-the-bag after standard phacoemulsification. The time of the examinations was 13.85+/-7.35 months postoperatively. We measured the amplitude of accommodation with three different methods: (1) subjective minus-lenses-to-blur method; (2) a new optical device (ACMaster, Carl Zeiss, Jena, Germany) using partial coherence interference (PCI) technique under physiological stimulus; and (3) objective anterior chamber depth measuring with a standard A-scan ultrasonic device (Ultrascan Imaging System, Alcon Laboratories, Forth Worth, TX, USA) before and after pharmacological relaxation of ciliary muscle. RESULTS: We measured -0.83+/-0.63 D amplitude of accommodation with subjective minus-lenses-to-blur method. The IOL position did not change significantly during physiological accommodation effort measured with PCI method (-0.026+/-0.134 mm). The change in the IOLs position between near fixating and after ciliary muscle relaxation was -0.18+/-0.28 mm measured with ultrasound. There were no significant differences between values of one-piece and three-piece IOL groups. CONCLUSION: The amplitude of accommodation measured by subjective and objective methods are different and are not comparable with each other. We did not observe any difference between values of examined two types of IOLs.

Accommodation, Ocular↗
PubMed2001

Subcutaneous adipose tissue layers as a stable correlate of leptin in response to short term energy restriction in obese girls.

AIMS: We studied the relationship of subcutaneous adipose tissue layers (SAT-layers) measured at 15 specified body sites with leptin before and after a weight loss program for three weeks. SUBJECTS AND METHODS: In 70 obese girls, SAT-layers were measured by means of the optical device, lipometer. Fat mass (FM) was estimated by means of bioelectrical impedance. RESULTS: At the beginning of the study, all estimates of adiposity, insulin, and SAT-layers from the upper body (from 1-neck to 6-lateral chest) were correlated to leptin at a P-value of<0.0001. Percentage FM together with SAT-layer 4-upper back and insulin explained 75% of the variation in leptin (P<0.0001). After three weeks, estimates of adiposity and leptin were reduced (all P<0.0001). Most SAT-layers were reduced, but SAT-layers 8-lower abdomen and 9-lower back were significantly increased. Changes in leptin were best explained by initial leptin, but percentage change (Delta) in insulin, Delta SAT-layer 1-neck, and Delta SAT-layer 3-biceps contributed to the Delta leptin (adj. r(2)=0.47, P<0.0001). In the weight-reduced state, circulating leptin was best explained by three SAT-layers and insulin (adj. r(2)=0.67, P<0.0001). DISCUSSION: The results suggest that Delta changes in leptin are attributable to changes in the endocrine state and subcutaneous fat, and SAT-layers may serve as a stable correlate of leptin in the weight-reduced state.

Adipose Tissue↗
PubMed2004

Body fat distribution of overweight females with a history of weight cycling.

Weight cycling may cause a redistribution of body fat to the upper body fat compartments. We investigated the distribution of subcutaneous adipose tissue (SAT) in 30 overweight women with a history of weight-cycling and age-matched controls (167 normal weight and 97 overweight subjects). Measurements of SAT were performed using an optical device, the Lipometer. The SAT topography describes the thicknesses of SAT layers at 15 anatomically well-defined body sites from neck to calf. The overweight women with a history of weight cycling had significantly thicker SAT layers on the upper body compared to the overweight controls, but even thinner SAT layers on their legs than the normal weight women. An android fat pattern was attributed to overweight females and, even more pronounced, to the weight cyclers. The majority of normal weight women showed a gynoid fat pattern. Using stepwise discriminant analysis, 89.0% of all weight cyclers and overweight controls could be classified correctly into the two groups. These findings show the importance of normal weight maintenance as a health-promoting factor.

Adipose Tissue↗
PubMed1999

Changes in cell volume induced by ion channel flux in guinea-pig cardiac myocytes.

1. The cell width of guinea-pig ventricular myocytes was measured using an optic device during patch-clamp experiments and the relationship between the ion channel flux and changes in cell volume was examined. 2. On superfusing myocytes with 50, 70, 150 and 200% osmotic solutions, the relative cell width changed to 121.1 (n = 4), 110.8 (n = 27), 87.1 (n = 6) and 82.6% (n = 6) of control, respectively. Changes in cell length were less than 2% in these test solutions. 3. The application of 300 nmol/L isoprenaline to myocytes swollen in the 70% hypotonic solution induced a decrease in cell width from 111.2 to 106.2% (n = 13). The application of isoprenaline in the isotonic solution also induced a decrease in cell width to 96.5% in eight of 13 cells. A membrane depolarization of 2-4 mV accompanied the isoprenaline-induced decrease in volume. In the remaining five cells, neither an obvious isoprenaline-induced decrease in volume nor membrane depolarization was observed. Under ruptured whole-cell voltage clamp conditions, the activation of inward isoprenaline-induced Cl- current decreased cell width. 4. Cell width was seen to either decrease or increase when a large outward or inward K+ current, respectively, was induced by shifting the holding potential or by applying 200 mumol/L pinacidil. Under gramicidin-perforated whole-cell clamp conditions, the cell width did not change, even when a large inward K+ current was induced. 5. When the test solution was applied to half of an elongated myocyte by using a micropipette, the cell width increased or decreased in the part exposed to the hypotonic or hypertonic test solutions, respectively. In contrast, in the other half of the elongated myocyte, the cell width responded in the opposite direction. 6. It is concluded that a continuous ionic flux through ion channels is capable of inducing changes in cell volume by generating a localized osmotic gradient across the cardiac sarcolemma.

Animals↗
PubMed2002

SLO angiography: arterio-venous filling times in monkey and minipig.

Confocal scanning laser ophthalmoscope (cSLO) is a new technique which enables ocular fundus image recording and dynamic retinal angiography to be performed. The ocular fundus image is acquired sequentially, point by point, and is reconstructed on a video monitor at the rate of 25 images per second. The aim of this paper is to evaluate the feasibility of measuring retinal arterio-venous filling times (AVFT) with a I + Tech cSLO. Three young adult cynomolgus monkeys and three young adult Göttingen minipigs were used as experimental models. All animals were anesthetized using a zolazepam + tiletamine mixture injected intramuscularly; heart rate and rectal temperature were monitored and corneal irrigation was regularly performed. For all subjects, prior to examination, hematocrit and globe axial length were measured. The images were recorded, stabilized and analyzed. The retinal examination consisted of retinal images with 40 degrees field cSLO, retinal fluorescein angiography and arterio-venous 50% filling time measurements. For each subject all images were easily recorded while keeping the animals in a normally lighted room without having to use any additional optical device. AVFT using an I + Tech cSLO is easily performed in monkeys and minipigs. AVFT measurements in minipigs and monkeys are similar. These results suggest that minipigs can replace monkeys as an experimental species for AVFT investigations.

Angiography↗
PubMed2001

Fluid volumes determination by impedance spectroscopy and hematocrit monitoring: application to pediatric hemodialysis.

A method for extracting fluid volumes from multifrequency bioimpedance, which takes into account the body geometry and the presence of nonconducting elements, was tested on 12 young dialyzed patients against correlations for total body water volumes (TBW) from Watson et al. and Humes et al. Our calculations of TBW from impedance were found to overestimate Humes' values by 0.25 L (0.8%) postdialysis and by 2.08 L (6.5%) predialysis. Extracellular water (ECW) was found to contribute an average of 93% of ultrafiltered volume. Intracellular water volume (ICW) determination from impedance was found to be too imprecise to predict its variation during dialysis; therefore, ICW variations were calculated as the difference between ultrafiltration and ECW changes. The continuous recording of hematocrit by an optical device monitored changes in plasma and interstitial volumes. In most cases, ultrafiltration was compensated mainly by a contribution from interstitial fluid, and the drop in plasma volume was generally moderate.

Adolescent↗
PubMed2001

Interrelationship between estimates of adiposity and body fat distribution with metabolic and hemostatic parameters in obese children.

Adiposity in childhood is often associated with metabolic abnormalities and accompanied by a dysregulation of the coagulation and fibrinolytic systems. We studied the interrelationship of metabolic and hemostatic parameters and explored their relationship with measures of adiposity and fat distribution in obese children. In 34 obese boys (mean age, 11.7 years) and 57 obese girls (12.1 years), blood samples were determined for insulin, glucose, triglycerides, fibrinogen, plasminogen activator inhibitor-1 (PAI-1), and tissue-type plasminogen activator-antigen (tPA-Ag). Body composition was assessed by means of impedance. Waist (Wc) and hip circumference were measured. The thickness of subcutaneous adipose tissue-layers (SAT-layers) was measured at 15 different body sites (from 1-neck to 15-calf) by means of the optical device, Lipometer. Overall subcutaneous fatness (SAT) was calculated and SAT-distribution was estimated by means of factor analysis. Significant correlations were found between different measures of adiposity and Wc with metabolic parameters. Fibrinogen was mainly associated with upper body subcutaneous fatness (factor 1) in boys. In girls, hemostatic parameters were associated with nearly all measures of adiposity and also with factor 1 and SAT. Regression analysis showed that factor 1 together with PAI-1 (both P <.0001) contribute to fibrinogen (adjusted [adj], R(2) =.30). PAI-1 together with trigylcerides (both P <.0001) and age (P <.04) were main determinants for tPA-Ag (adj, R(2) =.41). tPA-Ag (P <.0001) together with glucose (P <.001, negative slope), fibrinogen (P <.001, negative slope), and percentage fat mass (%FM) (P <.01) contributed to PAI-1 (adj, R(2) =.54). These results favor the concept of an interrelationship between metabolic and hemostatic parameters resulting from increased adiposity, perhaps influenced by pubertal development of children. Although upper body subcutaneous fatness was found to be a main correlate of metabolic and hemostatic parameters, it remains to be investigated whether this type of subcutaneous fat distribution is involved in the expression of metabolic and hemostatic risk factors and participates in the dysregulation of the hemostatic system in the state of childhood obesity.

Adipose Tissue↗
PubMed1991

[Endonasal, endoscopically controlled repair of dura defects of the anterior skull base].

18 patients presenting a circumscribed cerebrospinal fluid (CSF-) leak in the region of the ethmoidal roof, the olfactory cleft or the sphenoidal sinus, were operated on via the endonasal route. Dural laceration could be attributed to paranasal sinus surgery (iatrogenic CSF-leak, N = 11) and to other traumas (N = 6). In one case, no obvious cause was detectable (spontaneous CSF-leak). Using the 70-degree angular optical device, the dural lacerations were closed by autogenous grafts of conchal mucosa with the help of fibrin glue. The average time of postoperative observation was 17 months. No liquorrhoea, meningitis or cerebral abscess was observed postoperatively.

Cerebrospinal Fluid Rhinorrhea↗
PubMed1986

[Simultaneous fluo-angioscope: a method for laser treatment close to the macula].

The Simultaneous Fluo-Angioscope is a compact optical device developed in clinical work as ancillary equipment for laser slit lamps. Both binocular and stereoscopic fluorescein angiograms can be directly overlaid onto the patient's fundus in the slit lamp in a 1-to-1 juxtaposition of angiographic data and fundus topography. In this way precise paramacular laser coagulation is achievable with a minimum of scotoma. The overlaying of earlier photos onto the present fundus also makes objective diagnosis of tumors, vessels, and other pathologically significant areas possible.

Fluorescein Angiography↗
PubMed2003

Control of localized structures in an optical feedback interferometer.

We report a detailed experimental investigation of the dependence of localized structures, observed in a nonlinear optical device, on several control parameters. A first step of the study consists in the determination of the region of existence of localized states as a function of the system variables. Subsequently, we show how different control parameters can be used to the aim of tuning several localized structures properties; among these, of particular relevance are the contrast and the amplitude and frequency of the oscillations appearing on the tails of the structures. A discussion of the relation between the localized states here studied and the one predicted by general model for pattern forming systems is also given.

Biophysical Phenomena↗
PubMed2001

Inhibition of cervical ripening by local application of cyclooxygenase 2 inhibitor.

OBJECTIVE: Our goal was to test the hypothesis that the previously demonstrated progesterone-independent prolongation of pregnancy in rats treated with cervical application of the cyclooxygenase 2 inhibitor nimesulide is the result of inhibition of cervical ripening. STUDY DESIGN: Timed-pregnant Sprague-Dawley rats were randomly allocated to treatment with 50 mg nimesulide or vehicle, applied daily on the cervix for 5 days (days 14-18). On day 19 the animals were humanely killed and the cervices were removed. In the first series of experiments the cervices of animals treated with nimesulide (n = 10) or vehicle (n = 10) were examined with a cervimeter, which stretches the cervical tissues in incremental steps of 0.2 mm at 1-minute intervals. A steeper slope through the linear portion of the resulting force-versus-displacement curve indicates more resistance to stretch. In the second series of experiments the cervices of animals treated with nimesulide (n = 11) or vehicle (n = 11) were examined with the Collascope optical device. The cervical content of cross-linked collagen was measured with light-induced fluorescence. The fluorescence spectrum at 390 nm (peak wavelength of the collagen spectrum) was determined. For standardization, the ratio of counts of collagen peak over reference counts was used in the final analyses as an indicator of cross-linked collagen content. RESULTS: Animals treated with cervical application of nimesulide had significantly higher resistance to stretch than controls (slope: 0.2564 +/- 0.1213 vs 0.1387 +/- 0.0652; P =.019). The cervical content of cross-linked collagen was not significantly different between nimesulide-treated animals and controls (light-induced fluorescence ratios: 3.2134 +/- 0.7390 vs 2.7892 +/- 0.8518; P =.227). CONCLUSIONS: Treatment with cervical application of the cyclooxygenase 2 inhibitor nimesulide prevents the physiologic process of cervical ripening in late pregnancy. The inhibition is not the result of changes in cross-linked collagen content. Inhibition of cervical ripening with locally administered cyclooxygenase 2 inhibitor may be a potentially valuable treatment for patients at risk for preterm delivery.

Administration, Topical↗
PubMed2003

Gray-scale photolithography using microfluidic photomasks.

The ability to produce three-dimensional (3D) microstructures is of increasing importance in the miniaturization of mechanical or fluidic devices, optical elements, self-assembling components, and tissue-engineering scaffolds, among others. Traditional photolithography, the most widely used process for microdevice fabrication, is ill-suited for 3D fabrication, because it is based on the illumination of a photosensitive layer through a "photomask" (a transparent plate that contains opaque, unalterable solid-state features), which inevitably results in features of uniform height. We have devised photomasks in which the light-absorbing features are made of fluids. Unlike in conventional photomasks, the opacity of the photomask features can be tailored to an arbitrary number of gray-scale levels, and their spatial pattern can be reconfigured in the time scale of seconds. Here we demonstrate the inexpensive fabrication of photoresist patterns that contain features of multiple and/or smoothly varying heights. For a given microfluidic photomask, the developed photoresist pattern can be predicted as a function of the dye concentrations and photomask dimensions. For selected applications, microfluidic photomasks offer a low-cost alternative to present gray-scale photolithography approaches.

Journal Article↗