Search PubMed⌕ Search

SEARCH · Search PubMed

Results for “INDENES”

Search indexed PubMed citations on genomics, clinical trials, systematic reviews and public health. Explore titles, authors and supplied subject terms, then open the PubMed record.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 361 records · Page 20Linked to original sources
PubMed2002

Borderline between E1cB and E2 mechanisms. Chlorine isotope effects in base-promoted elimination Reactions.

The chlorine leaving group isotope effect has been measured for the base-promoted elimination reaction of 1-(2-chloro-2-propyl)indene (1-Cl) in methanol at 30 degrees C: k(35)/k(37) = 1.0086 +/- 0.0007 with methoxide as the base and k(35)/k(37) = 1.0101 +/- 0.0001 with triethylamine (TEA) as the base. These very large chlorine isotope effects combined with large kinetic deuterium isotope effects of 7.1 and 8.4, respectively, are consistent not with the irreversible E1cB mechanism proposed previously (J. Am. Chem. Soc. 1977, 99, 7926) but with the E2 mechanism with transition states having large amounts of hydron transfer and very extensive cleavage of the bond to chlorine.

Journal Article↗
PubMed2002

Conjugated macrocycles related to the porphyrins. 21. Synthesis, spectroscopy, electrochemistry, and structural characterization of carbaporphyrins.

The "3 + 1" variant of the MacDonald condensation has been shown to be an excellent methodology for synthesizing carbaporphyrins. In particular, 1,3-indenedicarbaldehyde condenses with tripyrranes in the presence of TFA to give, following oxidation with DDQ, a series of benzocarbaporphyrins in excellent yields. Triformylcyclopentadienes also afford carbaporphyrin products, albeit in low yields ranging from 5 to 8%. These hybrid bridged annulene structures have porphyrin-like electronic absorption spectra with strong Soret bands near 420 nm and a series of Q-bands through the visible region. The proton NMR spectrum confirms the presence of a strong diamagnetic ring current, and the meso-protons show up at 10 ppm, while the internal CH is shielded to approximately -7 ppm. Carbaporphyrins undergo reversible protonation with TFA. Initial addition of acid affords a monocation, although mixtures of protonated species are observed in the presence of moderate concentrations of TFA. However, in the presence of 50% TFA a C-protonated dication is generated. The dications relocate the pi-delocalization pathway through the benzo moiety of benzocarbaporphyrins, and these therefore represent bridged benzo[18]annulenes, although they nevertheless retain powerful macrocyclic ring currents. Carbaporphyrins with fused acenaphthylene and phenanthrene rings have been prepared, and the former demonstrated significantly larger bathochromic shifts in UV-vis spectroscopy that parallel previous observations for acenaphthoporphyrins. A diphenyl-substituted benzocarbaporphyrin 19b was also characterized by X-ray crystallography, and these data show that the macrocycle is reasonably planar although the indene subunit is tilted out of the mean macrocyclic plane by 15.5 degrees. The structural data indicates that the preferred tautomer in the solid state has the two NH's flanking the pyrrolene unit in agreement with previous spectroscopic and theoretical studies. Cyclic voltammetry for carbaporphyrin 19a was more complex than for true porphyrins, showing five anodic waves and two quasi-reversible reductive couples.

Journal Article↗
PubMed2002

Total synthesis of ent-cholesterol via a steroid C,D-ring side-chain synthon.

For the first time, one of the two enantiomers of cholesterol (ent-cholesterol) has been synthesized by a synthetic route that starts from a precursor containing the D-ring and entire side chain of cholesterol. As part of the reported synthetic route, a method of general utility for the large scale (>10 g) preparation of each enantiomer of [1 alpha(R*),7a alpha]-1-(1,5-dimethylhexyl)-1,2,3,6,7,7a-hexahydro-7a-methyl-5H-inden-5-one, C,D ring-side chain synthons that can be used for the synthesis of enantiomers of vitamin D(3), cholesterol, and their analogues was also developed. Using the enantiomer of the C,D-ring side-chain synthon that leads to ent-cholesterol, the A- and B-rings were elaborated from a linear fragment that is sequentially cyclized to form the steroid B- and A-rings. Using this route, ent-cholesterol was prepared in 23 steps from the methyl ester of (1 alpha,5 alpha,6 alpha)-(+/-)-6-methyl-2-oxo-bicyclo[3.1.0]hexane-1-carboxylic acid in a total yield of 2.6%.

Catalysis↗
PubMed2003

Reaction of 2,2-bis(trifluoromethyl)-1,1-dicyanoethylene with 6,6-dimethylfulvene: cycloadditions and a rearrangement.

Reaction of 2,2-bis(trifluoromethyl)-1,1-dicyanoethylene (BTF; 1) with 6,6-dimethylfulvene (2) affords the expected Diels-Alder cycloadduct, 7-(1-methylethylidene)-3,3-bis(trifluoromethyl)bicyclo[2.2.1]hept-5-ene-2,2-dicarbonitrile (3), in good yield. The cycloadduct 3 is unstable and exists in equilibrium with the starting materials in less polar solvents. In more polar environment, the [4 + 2] adduct 3 either reverts to starting materials, or, in a competing process, is converted to the formal [2 + 2] adduct, 2-(1-methylethylidene)-7,7-bis(trifluoromethyl)bicyclo[3.2.0]hept-3-ene-6,6-dicarbonitrile (6). In the presence of acid, 3 is converted to a third isomeric form, 1,3a,5,6-tetrahydro-7-methyl-5,5-bis(trifluoromethyl)-4H-indene-4,4-dicarbonitrile (8). Both 6 and 8 are formed with complete regiospecificity. Quantum mechanical calculations and X-ray crystallographic studies of this ensemble of reactions by BTF, and the analogous set of reactions by its progenitor, tetracyanoethylene (TCNE), reveal several interesting facets. The conversion of 3 to 6 occurs in certain polar solvents, in the presence of silica gel and alumina, as well as in the solid state. Single crystals of 3 were observed by X-ray crystallography to undergo crystal-to-crystal rearrangement to 6. The conversion of 3 to 8 proceeds by the initial retro-Diels-Alder reaction followed by isomerization of the fulvene to 1-isopropenyl-1,3-cyclopentadiene that then reacts with BTF to give the alternative Diels-Alder product as a single regioisomer. A hybrid density functional theory (DFT) method at the B3LYP/6-31G(d) level of theory gave calculated relative energies of 0.0, -9.0, and -18.8 kcal/mol for 3, 6, and 8, respectively. The same method was also used to correctly predict the regiochemical outcome of the cycloaddition of BTF with 1-isopropenyl-1,3-cyclopentadiene. Finally, an explanation is offered for the preference of the persubstituted cyanoolefins BTF and TCNE to add to the exocyclic diene portion of 1-isopropenyl-1,3-cyclopentadiene and the contrasting preference of 2-acetyloxy-2-propenenitrile to add to the endocyclic diene.

Journal Article↗
PubMed2003

Regioselective oxidations of benzocarbaporphyrins with ferric chloride: a facile synthesis of bridged [18]annulene ketals with strong absorptions in the far red and an unexpected halogenation reaction at the interior carbon atom.

Benzocarbaporphyrins 4 were found to undergo regioselective oxidations with ferric chloride in methanol, ethanol, isopropyl alcohol, or ethylene glycol to give bridged benzo[18]annulene ketal derivatives 5 in excellent yields. These polar derivatives were generally isolated in a monoprotonated form and the corresponding free bases appeared to be relatively unstable. Addition of TFA resulted in the formation of spectroscopically distinct dications. The ketals 5 were highly diatropic in nature, showing the internal alkoxy substituents upfield beyond -1 ppm in their proton NMR spectra. The external meso-protons resonated near 10 ppm, confirming the presence of a strong aromatic ring current. The UV-vis spectra for 5 showed a Soret band at 422 nm, and two strong absorptions in the far red at 751 and 832 nm. A carbaporphyrin with a fused acenaphthylene ring was also oxidized with ferric chloride and this produced a ketal derivative with still further bathochromically shifted absorptions particularly for the Soret band. Also, the use of different alcohols in these reactions allows the overall polarity of these ketal products to be controlled and this could have merit in biomedical applications. Reaction of carbaporphyrin 4a with aqueous ferric chloride afforded the corresponding 21-chloro derivative 20 in good yields, and at longer reaction times a nonaromatic dione was isolated. Aqueous ferric bromide gave a 21-bromocarbaporphyrin product but in this case very poor yields (<10%) were noted. Mechanisms are proposed to explain the formation of these unusual oxidation products. The structure of 21-chlorocarbaporphyrin 20 was further demonstrated by X-ray crystallography. The presence of the interior chlorine atom was found to tilt the indene moiety by 29.59(4) degrees relative to the [18]annulene macrocyclic ring. The crystal packing for 20 shows offset face-to-face pi-stacking interactions that link the porphyrinoid molecules as closely paired dimers.

Journal Article↗
PubMed2004

General and efficient insertion of carbons carrying benzotriazole.

Anions formed from the lithiation of 1-(1-benzotriazolylalkyl)benzotriazoles (1, 6) and 1-(1-methylthioalkyl)benzotriazoles (10 and 10a) with n-BuLi underwent additions to cyclic and acyclic ketones giving intermediates 3a-f, 7b-f, and 11b-d, respectively, in excellent yields. Thermal rearrangements of intermediates 3a,b,d-f and 7b-d,f in the presence of zinc bromide provided one-carbon chain-extended or ring-expanded alpha-benzotriazolyl ketones 4a,b,d-f and 8b-d,f in moderate yields with excellent regioselectivity. By contrast, intermediates 11b-d on treatment with zinc bromide loose a molecule of benzotriazole followed by intramolecular cyclization of the resulting intermediates 12b-d to provide the 2,3- and 1,2,3-substituted indenes 13b-d in good yields.

Journal Article↗
PubMed2004

Enantioselective photochemical synthesis of a simple alkene via the solid state ionic chiral auxiliary approach.

Irradiation of cis-bicyclo[4.3.0]non-8-ylacetophenone derivatives (1) in solution and the solid state yields cis-3a,4,5,6,7,7a-hexahydro-1H-indene (2) via a Norrish type II cleavage process. Asymmetric induction studies were conducted by providing the reactants with carboxylic acid substituents to which ionic chiral auxiliaries were attached through salt formation with optically pure amines. Irradiation of the salts (5 in total) in the crystalline state gave enantiomeric excesses of up to 44%. Single-crystal X-ray diffraction studies were performed on ketone 1a as well as salts 1d and 1g, and on this basis, the structure-reactivity relationships involved are discussed.

Journal Article↗
PubMed2004

Preparation and resolution of a modular class of axially chiral quinazoline-containing ligands and their application in asymmetric rhodium-catalyzed olefin hydroboration.

The preparation and resolution of a series of axially chiral quinazoline-containing ligands is described in which the key steps are the metal-catalyzed naphthyl-phosphorus bond formation, the naphthalene-quinazoline Suzuki coupling, and the preparation of the Suzuki electrophilic components from the corresponding imidate and anthranilic acid. Diastereomeric palladacycles derived from the racemic phosphinamines and (+)-di-mu-chlorobis[(R)-dimethyl(1-(1-naphthyl)ethyl)aminato-C2,N]dipalladium(II) were separated by fractional crystallization. The configuration of the resulting diastereomers was determined by X-ray crystallographic analysis. Displacement of the resolving agent by reaction with 1,2-bis(diphenylphosphino)ethane afforded enantiopure ligand in each case. Their rhodium complexes were prepared and applied in the enantioselective hydroboration of a range of vinylarenes. The quinazolinap catalysts were found to be extremely active, giving excellent conversions, good to complete regioselectivities, and the highest enantioselectivities obtained to date for several members of the vinylarene class, including cis-beta-methylstyrene (97%), cis-stilbene (99%), and indene (99.5%).

Journal Article↗
PubMed2005

A practical, fast, and high-yielding aziridination procedure using simple Cu(II) complexes containing N-donor pyridine-based ligands.

Four-coordinate dichlorocopper(II) complexes derived from di(2-pyridyl)methanes or pyridine itself exhibit high catalytic activity in aziridination of regular olefins with PhINTs in weakly coordinating chloroform in the presence of 1-2 equiv of NaBArF4 (BArF4- = tetra[3,5-di(trifluoromethyl)phenyl]borate). High yields of aziridines exceeding 90% can be obtained with a 1:1 olefin/PhINTs ratio and 1-5 mol % catalyst loading for such reactive olefins as styrene, tri- and tetramethylethylene. For cis-cyclooctene, indene, methyl acrylate, methyl methacrylate, vinyl methyl ketone, tert-butylethylene, and neopentylethylene, as well as for 1-hexene and cyclopentene, yields of corresponding aziridines vary from 44% to 83%. The catalytic activity and efficiency of the reported copper complexes decrease moderately in the absence of NaBArF4.

Journal Article↗
PubMed2005

Irradiation of imine-group VI carbene complexes in the presence of alkynes. 2. Control of product distribution.

The photoreactivity of iminecarbene complexes in the presence of alkynes has been explored. Up to four different reaction paths are available depending on the alkyne and carbene complex substituents, although in each case only one type of product is isolated. 2H-Pyrrole derivatives are formed mainly from aryl alkynes. When alkyl alkynes are used, the method affords a new type of aza-dendralene product in good yields. Isoquinoline derivatives can also be formed in a two-step one-pot photochemical process when the appropriate substituents are present. Finally, indene derivatives are also available through a benzannulation reaction. To explore the underlying mechanism, we carried out computations using DFT methods. Experimental and theoretical results compare well, which allows control over the reaction and product distribution.

Journal Article↗
PubMed2006

Theoretical study on the lithium-halogen exchange reaction of 1,1-dihaloalkenes with methyllithium and the nucleophilic substitution reaction of the resulting alpha-halo alkenyllithiums.

Transition structures for the lithium-bromine exchange reaction of 1,1-dibromoalkenes with methyllithium have been located by both the B3LYP and the MP2 levels of theory with the 6-31+G basis set. The reaction with methyllithium dimer gave similar results with lower activation energies. These calculations predict both the kinetic and the thermodynamic stereoselectivity correctly. That is, the sterically more constrained bromine atom of 1,1-dibromoalkenes was predominantly reacted with alkyllithium (dimer) in the kinetic condition. The intramolecular substitution reaction of 4,4-dibromo-3-methyl-3-pentenol in the presence of methyllithium has been investigated. After deprotonation of the alcohol and the lithium-bromine exchange reaction, the intramolecular substitution reaction occurs to give dihydrofuran in a concerted manner. The intermolecular substitution of alpha-chloro alkenyllithium with methyllithium was also studied for comparison. The formation of the indene derivative from 3-(o-bromophenyl)-1,1-dibromo-1-propene in the presence of methyllithium occurs in a similar manner. The lithium-bromine exchange reaction of bromobenzene with methyllithium occurs in an S(N)2 mechanism and the solvent plays an important role.

Journal Article↗
PubMed2006

Radical-molecule reactions for aromatic growth: a case study for cyclopentadienyl and acenaphthylene.

Polycyclic aromatic hydrocarbon growth from acenaphthylene and cyclopentadienyl was investigated by using the B3LYP/6-31G(d,p) and BH&HLYP/6-31G(d,p) levels of theory as well as transition state theory. The reaction pathways of cyclopentadienyl bearing hydrocarbons are different from those without these moieties and cannot be adequately accounted for by the existing acetylene addition and aryl-aryl addition mechanisms. The reaction mechanisms identified in this paper lead to the formation of fluoranthene, aceanthrylene, and acephenanthrylene. Rate constants of the radical-molecule addition and subsequent intramolecular addition steps predict that the 1,2 double bond in acenaphthylene is much more reactive than the 3,4 and 4,5 double bonds. Fluoranthene is the most abundant product produced at high temperatures and the yield of acephenanthrylene is bigger than that of aceanthrylene. The computational results are discussed in light of pyrolysis experiments on CPD-indene and CPD-acenaphthylene mixtures conducted by Prof. Mulholland's research group reported in a previous work.

Acenaphthenes↗
PubMed2005

The peculiar kinetics of the reaction between acetylene and the cyclopentadienyl radical.

The cyclopentadienyl radical (cC(5)H(5)) is a fascinating molecule characterized by several peculiar properties, such as its high internal symmetry and resonance enhanced stability. This makes cC(5)H(5) one of the most abundant radicals present in high temperature gaseous environments, such as flames. Therefore it is generally considered an interesting candidate as the starting point of reaction pathways leading to the formation of polycyclic aromatic hydrocarbons (PAH) and soot in combustion processes. However, known reaction pathways are not able to explain some recent experimental findings concerning the rapid conversion of cC(5)H(5) into C(7)H(7) and C(9)H(8) in the presence of acetylene. In this work, we used ab initio calculations and quantum Rice-Ramsperger-Kassel (QRRK) theory to investigate the cC(5)H(5) + C(2)H(2) reaction kinetics. We found that cC(5)H(5) can add acetylene to form, through a fast and not previously known reaction, the heptatrienyl radical (cC(7)H(7)), which, in many ways, can be considered the superior homologue of cC(5)H(5). The calculated reaction kinetic constant is (2.2 x 10(11))exp(-6440/T(K)) cm(3) mol(-1) s(-1) and is in good agreement with experimental data, while that of the inverse process is (4.2 x 10(16))T(-1) exp(-30 850/T(K)) s(-1). In a successive reaction, cC(7)H(7) can add a second acetylene molecule to form indene, cC(9)H(8), and H. The forward and backward kinetic constants are (6.6 x 10(11))exp(-10 080/T(K)) and (4.2 x 10(14))exp(-27 300/T(K)) cm(3) mol(-1) s(-1), respectively. These two successive reactions, leading from a single C5 cycle to a bicyclic C5-C6 species, represent a new PAH growth mechanism, characterized by a C5-C7 ring enlargement reaction.

Journal Article↗
PubMed2005

A novel approach in analyzing aromaticity by homo- and isostructural reactions: an ab initio study of fluorobenzenes.

The influence of fluorine substitutions on the stability of benzene is examined by using the Hartree-Fock (HF) and MP2 models. It is conclusively demonstrated that homodesmotic reactions based on the open-chain zigzag polyenes are unsatisfactory. A comparison of the intramolecular interactions of educts and products shows that they are not well balanced. Hence, these reactions should be abandoned in discussing aromaticity. A much better vehicle for exploring aromaticity is provided by homostructural reactions, which employ cyclic monoene and diene as reference model compounds. Their heavy atoms are enforced to assume planar geometries to enable sigma/pi separation. The HF/cc-pVTZ calculations show that extrinsic aromaticity of benzene B DeltaE(ease)(B)() arises both from the sigma- and pi-contributions. They are -14.8 and -23.1 in kcal/mol, respectively, if the stockholder energy partitioning scheme is employed. This result implies that both the sigma- and pi-frameworks contribute to the aromatic stabilization of B, the latter being more important. The total aromatic stabilization DeltaE(ease)(B)() is -37.9 kcal/mol. Schleyer's indene-isoindene isomerization approach also strongly indicates that the decisive factor in determining the aromatic stability of the benzene moiety is the pi-electron framework. The origin of extrinsic aromaticity is identified as the increased nuclear-electron attraction of both sigma- and pi-electrons, if 1,3-cyclohexadiene is used as a gauge compound. Further, by using a system of isostructural reactions, it is conclusively demonstrated that fluorobenzenes exhibit a remarkable additivity of the substituent effects, as far as the stability of multiply substituted benzenes is concerned. This additivity rule is so accurate that it enables delineation of the fluorine repulsions and the aromaticity defect DeltaE(AD). It appears that the DeltaE(AD) values increase upon sequential fluorine substitution at the next nearest (vicinal) position thus making multiply fluorinated benzenes less stable.

Butadienes↗
PubMed2006

High pressure pyrolysis of toluene. 1. Experiments and modeling of toluene decomposition.

The pyrolysis of toluene, the simplest methyl-substituted aromatic molecule, has been studied behind reflected shock waves using a single pulse shock tube. Experiments were performed at nominal high pressures of 27 and 45 bar and spanning a wide temperature range from 1200 to 1900 K. A variety of stable species, ranging from small hydrocarbons to single ring aromatics (principal soot precursors such as phenylacetylene and indene) were sampled from the shock tube and analyzed using standard gas chromatographic techniques. A detailed chemical kinetic model with 262 reactions and 87 species was assembled to simulate the stable species profiles (specifically toluene, benzene and methane) from the current high-pressure pyrolysis data sets and shock tube-atomic resonance absorption spectrometry (ARAS) H atom profiles obtained from prior toluene pyrolysis experiments performed under similar high-temperature conditions and lower pressures from 1.5 to 8 bar. The primary steps in toluene pyrolysis represent the most sensitive and dominant reactions in the model. Consequently, in the absence of unambiguous direct experimental measurements, we have utilized recent high level theoretical estimates of the barrierless association rate coefficients for these primary reactions, C6H5 + CH3 --> C6H5CH3 (1a) and C6H5CH2 + H --> C6H5CH3 (1b) in the detailed chemical kinetic model. The available data sets can be successfully reconciled with revised values for deltaH0f(298K)(C6H5CH2) = 51.5 +/- 1.0 kcal/mol and deltaH0f(298K)(C6H5) = 78.6 +/- 1.0 kcal/mol that translate to primary dissociation rate constants, reverse of 1a and 1b, represented by k(-1a,infinity) = (4.62 x 10(25))T(-2.53)exp[-104.5 x 10(3)/RT] s(-1) and k(-1b,infinity) = (1.524 x 10(16))T(-0.04)exp[-93.5 x 10(3)/RT] s(-1) (R in units of cal/(mol K)). These high-pressure limiting rate constants suggest high-temperature branching ratios for the primary steps that vary from 0.39 to 0.52 over the temperature range 1200-1800 K.

Journal Article↗
PubMed2005

Unified concept of solubilization in water by hydrotropes and cosolvents.

In the present work hydrophobic dyes, i.e. disperse red 13 (DR-13; (2-[4-(2-chloro-4-nitrophenylazo)-N-ethylphenylamino]ethanol) and Jaune au gras W1201 (1H-indene-1,3(2H)-dione,2-(2-quinolinyl)), are solubilized in water with the help of different additives: acetone and 1-propanol as typical cosolvents, sodium xylene sulfonate (SXS) as a representative of a classical hydrotrope, sodium dodecyl sulfate (SDS) as a typical surfactant, and finally some "solvosurfactants" [ propylene glycol monoalkyl ether derivatives (CiPOj: i = 1, j = 1 and 3; i = 3, j = 1 and 2; i = 4 and tertio-butyl, j = 1) and 1-propoxy-2-ethanol (C3EO1)]. These solvosurfactants are short amphiphiles that do not form well-defined structures in water such as micelles. For all additives an exponential increase in the solubilizations of the two studied hydrophobic dyes was observed when their concentrations in water were increased. Except for the SDS solution, no difference in the overall shapes of the solubilization curves (dye solubility against additive concentration) was found. All the studied molecules were classified according to their hydrotropic efficiencies, i.e., their abilities to solubilize a hydrophobic, sparingly soluble compound in water. The volume of the hydrophobic parts of the studied additives, roughly evaluated by simple calculations, was found to influence strongly the hydrotropic efficiency; i.e. the larger the hydrophobic part of the additive, the better the hydrotropic efficiency. By contrast, the hydrophilic part carrying a charge or not is of minor importance. Taking the hydrophobic part of the molecules as the key parameter, the water solubilization efficiency of cosolvents, hydrotropes, and solvosurfactants can be described in a coherent way.

Journal Article↗
PubMed1998

Ethene-Norbornene Copolymerization Using Homogenous Metallocene and Half-Sandwich Catalysts: Kinetics and Relationships between Catalyst Structure and Polymer Structure. 1. Kinetics of the Ethene-Norbornene Copolymerization Using the

The kinetics of the ethene-norbornene copolymerization using the [(isopropylidene)(eta5-inden-1-ylidene-eta5-cyclopentadienyl)]zirconium dichloride (iPr[IndCp]ZrCl2)/methylaluminoxane catalyst has been investigated at 70 degreesC in a concentrated solution of norbornene in toluene and an ethene pressure ranging from 4 to 60 bar (58-870 psi). The ethene reaction rate has been measured during the copolymerization process at varying reactant concentrations. The reaction orders and rate constants were determined and compared to the corresponding values of the ethene and norbornene homopolymerizations. It was found that kEhomo > kEco and kNhomo < kNco. The copolymerization parameters are r1 = 0.9 and r2 = 0.05.

Journal Article↗
PubMed2003

New Sesquiterpenes from Litsea verticillata.

Seven new sesquiterpenes, named litseagermacrane (1), 7-epi-eudesm-4(15)-ene-1alpha,6alpha-diol (2), 5-epi-eudesm-4(15)-ene-1beta,6beta-diol (4), litseahumulanes A (6) and B (7), and litseachromolaevanes A (11) and B (12), as well as the known compounds 7-epi-eudesm-4(15)-ene-1beta,6beta-diol (3), eudesm-4(15)-ene-1beta,6alpha-diol (5), octahydro-4-hydroxy-3alpha-methyl-7-methylene-alpha-(1-methylethyl)-1H-indene-1-methanol (8), 10-hydroxyl-15-oxo-alpha-cadinol (9), and aphanamol II (10), were isolated from an anti-HIV fraction of the leaves and twigs of Litsea verticillata Hance (Figure 1). Isolates 1, 4, and 12 were found to inhibit HIV-1 replication in a green fluorescent protein (GFP)-based reporter cell line (HOG.R5) with IC(50) values of 6.5 (27.5), 17.4 (73.1), and 28.0 (119.7) microg/mL (microM), respectively. The structures of these isolates were determined by spectral data including 1D and 2D NMR spectra. Compound 11 was confirmed by X-ray crystallographic analysis.

Anti-HIV Agents↗