Search PubMed⌕ Search

SEARCH · Search PubMed

Results for “Waste Disposal, Fluid”

Search indexed PubMed citations on genomics, clinical trials, systematic reviews and public health. Explore titles, authors and supplied subject terms, then open the PubMed record.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2Linked to original sources

Optimization of a biological process for treating potato chips industry wastewater using a mixed culture of Aspergillus foetidus and Aspergillus niger.

Potato chips industry wastewater was collected and analyzed for biochemical oxygen demand (BOD), chemical oxygen demand (COD), total suspended solids (TSS) and total carbohydrates. Two Aspergillus species, A. foetidus and A. niger, were evaluated for their ability to grow and produce biomass and reduce the organic load of the wastewater. A. foetidus MTCC 508 and A. niger ITCC 2012 were able to reduce COD by about 60% and produce biomass 2.4 and 2.85 gl(-1), respectively. Co-inoculation of both Aspergillus strains resulted in increased fungal biomass production and higher COD reduction than in individual culture at different culture pH. pH 6 was optimum for biomass production and COD reduction. Amendment of the wastewater with different N and P sources, increased the biomass production and COD reduction substantially. Under standardized conditions of pH 6 and amendment of wastewater with 0.1% KH2PO4 and 0.1% (NH4)2 SO4, a mixed culture gave 90% reduction in COD within 60 h of incubation.

Aspergillus↗

Preliminary evaluation of fungicidal and termiticidal activities of filtrates from biomass slurry fuel production.

Biomass slurry fuel (BSF) production has recently been developed as a natural energy for the conversion of solid biomass into fuel. In addition to using fuel, filtrates from BSF production may also serve a chemical source with several organic compounds. There is an increasing interest in the research and application of biomass-based filtrates. In this study, fungicidal and termiticidal properties of filtrates from BSF production using sugi (Cryptomeria japonica) and acacia (Acacia mangium) wood were evaluated in laboratory decay and termite resistance tests. Wood blocks treated with the filtrates showed increased resistance against brown-rot fungus, Fomitopsis palustris. However the filtrates from sugi wood processed at 270 degrees C which contained less phenolic compounds than the other filtrates were effective against white-rot fungus, Trametes versicolor. Phenolic compounds of filtrates seemed to play a role in the decay resistance tests however the filtrates did not increase the durability of the wood blocks against subterranean termites Coptotermes formosanus. Despite high acetic and lactic acid content of the filtrates, vanillin content of the filtrates may have served as an additional food source and promoted termite attack. It can be concluded that filtrates with phenolic compounds from lignin degradation during BSF production can be considered for targeted inhibition of brown-rot.

Animals↗

Use of low-cost biological wastes and vermiculite for removal of chromium from tannery effluent.

Biological wastes (sawdust, rice husk, coirpith and charcoal) and a naturally occurring mineral (vermiculite) have been tested for their effectiveness in removing Cr from tannery effluent through batch and column experiments. The adsorption capacities of the substrates were also evaluated using isotherm tests and computing distribution co-efficient. The sawdust exhibited a higher adsorption capacity (k = 1482 mgkg(-1)), followed by coirpith (k = 159 mgkg(-1)). The biosorbent and mineral vermiculite in columns were found very effective in removing Cr from tannery effluent. About 94% removal of Cr was achieved by a column of coirpith, and equally (93%) by a column containing a mixture of coirpith and vermiculite. This study showed that biological wastes are potential adsorbents of Cr, which could be successfully used to reduce the Cr concentrations in tannery effluent.

Adsorption↗

Emission of methane and carbon dioxide and earthworm survival during composting of pharmaceutical sludge and spent mycelia.

Emissions of methane (CH4) and carbon dioxide (CO2) from spent mycelia of the mold Penicilium notatum and sludge from the effluent treatment facility (ETPS) of a pharmaceutical industry were estimated twice during a two-week composting before vermicomposting. These wastes are dumped in landfills or sometimes used in agricultural fields and no reports are available on their greenhouse gas producing potentials. The solid wastes contained appreciable organic carbon and nitrogen while very high Fe, Mn and Zn were found in ETPS only. Pure wastes did not support germination of Vigna radiata L. while mixing soil with ETPS and spent mycelia at the ratios of 12:1 and 14:1 led to 80% and 50% germination, respectively. The wastes were mixed with cowdung at the ratios of 1:1, 1:3 and 3:1 for composting. Carbon dioxide emissions were always significantly higher than CH4 emissions from all the treatments due to prevalence of aerobic condition during composting. From some treatments, CH4 emissions increased with time, indicating increasing activity of anaerobic bacteria in the waste mixtures. Methane emissions ranged from 21.6 to 231.7 microg m(-2) day(-1) while CO2 emissions were greater than thousand times at 39.8-894.8 mg m(-2) day(-1). The amount of C emitted as CH4-C and CO2-C from ranged from 0.007% to 0.081% of total C composted. Cowdung emitted highest CH4 followed by spent mycelia and ETPS while ETPS emitted more CO2 than spent mycelia but lesser than cowdung. Global warming potential of emitted CH4 was found to be in the range of 10.6-27.7 mg-CO2-equivalent on a 20-year time horizon. The results suggest that pharmaceutical wastes can be an important source of CH4 and CO2 during composting or any other stockpiling under suitable moisture conditions. The waste mixtures were found not suitable for vermicomposting after two weeks composting and earthworms did not survive long in the mixtures.

Animals↗

Bioconversion of industrial wastewater and wastewater sludge into Bacillus thuringiensis based biopesticides in pilot fermentor.

Starch industry wastewater (SWW), slaughterhouse wastewater (SHWW) and secondary sludges from three different wastewater treatment plants (Jonquière--JQS, Communauté Urbaine de Québec--CUQS and Black lake-BLS) were used as raw materials for the production of Bacillus thuringiensis (Bt) based biopesticides in a pilot scale fermentor (100 L working volume). The slaughterhouse wastewater exhibited the lowest Bt growth and entomotoxcity (Tx) potential (measured against spruce budworm) due to low availability of carbon, nitrogen and other nutrients. Performance variation (growth, sporulation, proteolytic activity and Tx potential) within the three types of sludges was directly related to the availability of nitrogen and carbohydrates, which could change with sludge origin and methods employed for its generation. The Tx potential of Bt obtained in different secondary sludges (JQS: 12 x 10(9) SBU/L; CUQS: 13 x 10(9) SBU/L and BLS: 16 x 10(9) SBU/L) and SWW (18 x 10(9) SBU/L) was higher than the soybean based synthetic medium (10 x 10(9) SBU/L). The maximum protease activity was obtained in CUQ secondary sludge (4.1 IU/mL) due to its high complex protein concentration. Nevertheless, high carbohydrate concentration in SWW repressed enzyme production. The secondary sludges and SWW were found to be suitable raw materials for high potency Bt biopesticide production.

Agriculture↗

Olive-mill wastewaters: a promising substrate for microbial lipase production.

The present study investigated the valorization of olive-mill wastewater (OMW) by its use as a possible growth medium for the microbial production of extra-cellular lipase. To this end, strains of Geotrichum candidum (NRRL Y-552 and Y-553), Rhizopus arrhizus (NRRL 2286 and ISRIM 383), Rhizopus oryzae (NRRL 6431), Aspergillus oryzae (NRRL 1988 and 495), Aspergillus niger (NRRL 334), Candida cylindracea (NRRL Y-17506) and Penicillium citrinum (NRRL 1841 and 3754, ISRIM 118) were screened. All strains were able to grow on the undiluted OMW, producing extra-cellular lipase activity. C. cylindracea NRRL Y-17506 showed the highest lipase activity on all the typologies of OMW used. Its lipase production on OMW was markedly affected by the type of nitrogen source and was induced by the addition of olive oil. The highest activity (9.23 IU ml(-1)) of the yeast was obtained on OMW supplemented with NH(4)Cl (2.4 g l(-1)) and olive oil (3.0 g l(-1)).

Candida↗

Biodegradation of chlorferon and diethylthiophosphate by consortia enriched from waste cattle dip solution.

Chlorferon and diethylthiophosphate (DETP) are the hydrolysis products of coumaphos, an organophosphate pesticide. In this research, two consortia of bacterial cultures, one responsible for degrading chlorferon and the other for degrading DETP, were selectively enriched from waste cattle dip solution. The enriched cultures were used as inocula to grow biomass for biodegradation studies. For chlorferon degradation, the optimum biomass concentration was found to be 80g/L, and pH 7.5 was selected as the optimal operating pH. Chlorferon degradation was characterized by substrate inhibition kinetics with parameter values estimated to be V(m)=0.062+/-0.011mg/(g-biomass)h, K(m)=21+/-7mg/L, and K(Si)=118+/-45mg/L. For DETP degradation, the optimum biomass concentration was found to be 60g/L, and the optimum pH was in the range of 7.5-8. DETP degradation was characterized by Michaelis-Menten kinetics with parameter values estimated to be V(m)=1.52+/-0.10mg/(g-biomass)h and K(m)=610+/-106mg/L.

Animals↗

Characterization of carbons from olive cake by sorption of wastewater pollutants.

Studies has been conducted to compare the sorption properties between raw carbons made from olive cake and commercial activated carbons to remove aquatic pollutant such as heavy metal (HM), phenol (Ph), dodecylbenzenesulfonic acid-sodium salt detergent (DBSNa) and methylene blue dye (MB). Effect of acidic treatments by H2SO4, HCl and HNO3 on the sorption properties of olive cake carbon (OCC) were studied by mass titration, SEM photographs, sorption isotherms. It is found that acidic treatment changes the surface properties of OCC but do not enhance its sorption capacity. Compared to commercial activated carbons the OCC derivatives generally are equally able to uptake HM and Ph from solution but MB and DBSNa are not. This different behaviour is to attribute to manufacturing and activation treatments so as surface groups of the precursor sorbent material. For the heavy metals, chromium and silver were removed effectively but to small extent cadmium. This may be because of the various charge densities of metal elements tested. The results of the multiple experiments indicate that sorption of cadmium ions can be significantly improved by the presence of complexing agents sorbed from the carbon. An empirical mathematical form is proposed to correlate experimental data and to compare the performance of the different sorbent materials.

Adsorption↗

Occurrence and degradation of butyltins and wastewater marker compounds in sediments from Barcelona harbor, Spain.

Contamination of Barcelona harbor sediments was assessed by the quantitative determination of butyltins (TBT, DBT and MBT) and surfactant intermediates, namely linear alkylbenzenes (LABs) and nonylphenols (NPs), as markers of urban and industrial wastewater contamination, respectively. Degradation indexes of TBT and LABs were calculated. Tributyltin predominated in the whole area over its degradation products, ranging from 98 to 4702 ng Sn/g. These elevated concentrations reveal a persistent historical contamination and a moderate degradation (BT(deg)). Moreover, the high LAB concentrations (1.2-53.1 microg/g) compared to the relatively low NP levels (3.8-72.0 ng/g) suggest a predominance of urban over industrial wastewater inputs, although a significant correlation (r(2) = 0.82, N = 12, P = 0.001) between LABs and NPs was found. Stormwater runoff and combined sewer overflows (CSO) were likely the most possible sources for both surfactant intermediates. The high degradation index values obtained for LABs could indicate an improvement in the wastewater management reducing its recent discharge into the Barcelona harbor area.

Benzene↗

Rapid health-risk assessment of effluent irrigation on an Australian university campus.

Rapid health-risk assessment of chlorinated sewage-effluent irrigation of lawns, fields and crops adjacent to populated areas at the University of Western Sydney was carried out in response to warnings from the supplying authority of deteriorating bacteriological quality of the water. Irrigation with low-quality effluent offered potential for the contamination of a range of foodstuffs and the exposure of staff, students and visitors. The need for early investigation was emphasised by eutrophication presenting as sudden algal bloom in one of the campus dams and an odour suggestive of anaerobic proteolysis on irrigation. No baseline data existed regarding improvement or deterioration in water quality with passage through the dams, or relating to potential for direct or indirect exposure. The assessment design incorporated three methodologies to generate biophysical, environmental and social data. Environmental and social data were used to augment short-term data for biophysical indicators in the estimation of risk. Where required qualitative information was converted to quantitative data using categorical ranking tables, and risk evaluation was carried out using ranked risk and uncertainty values. Results for biophysical indicators showed a steady improvement in water quality with passage through campus dams, emphasising a need to regard the impoundments as part of a treatment chain, rather than as passive storage units. Effluent quality at most irrigation sites marginally exceeded regional action thresholds for relevant crop types, suggesting a need for risk management through revised irrigation practice, system design, distribution management and risk communication. Problems requiring urgent intervention included the concentration of contaminants of bovine faecal origin in one dam as the result of a closed loop within the reticulation. Also of concern was the exposure of certain most susceptible individuals including crèche children who visited pasture land and orchards where irrigated oranges were collected, and potentially immunocompromised or mentally challenged adults in a work-opportunity gardening scheme. Despite its limitations, rapid risk assessment enabled identification and proactive management of major risk factors, promoted risk communication and awareness, and laid the foundation for ongoing risk surveillance.

Adolescent↗

Managing disposal of water produced with petroleum in Kuwait.

Disposal of water produced with petroleum has been of great interest in Kuwait for the last 20 years. The current problem arose when the Burgan oil field, which is the second largest field in the world, experienced successive increases in the water content of the produced oil. This study introduces a decision-making analysis of the considered alternatives for the disposal of the produced water. Four alternative solutions exist for the industry as practical solutions for the disposal of water produced in Kuwait. The first method utilizes a large number of pits to discharge water. The second alternative depends on discharging water into sealed pits. The third approach to dispose water is by injecting the water underground. The last method is similar to the previous one, but takes into consideration the recovery of reservoir pressure to maintain the rate of oil production. A questionnaire was distributed to 48 experts at the top management level of the petroleum companies and the governmental authority. The data collected considered cost, efficiency, and environmental parameters. Based on the data, a statistical analysis was conducted using the factor analysis method to reduce the number of investigated variables. The analysis concluded that the optimal solution is to use the effluent injection method to discharge water produced with oil in Burgan and similar fields in Kuwait.

Data Collection↗

An inexact two-stage mixed integer linear programming method for solid waste management in the City of Regina.

In this study, an interval-parameter two-stage mixed integer linear programming (ITMILP) model is developed for supporting long-term planning of waste management activities in the City of Regina. In the ITMILP, both two-stage stochastic programming and interval linear programming are introduced into a general mixed integer linear programming framework. Uncertainties expressed as not only probability density functions but also discrete intervals can be reflected. The model can help tackle the dynamic, interactive and uncertain characteristics of the solid waste management system in the City, and can address issues concerning plans for cost-effective waste diversion and landfill prolongation. Three scenarios are considered based on different waste management policies. The results indicate that reasonable solutions have been generated. They are valuable for supporting the adjustment or justification of the existing waste flow allocation patterns, the long-term capacity planning of the City's waste management system, and the formulation of local policies and regulations regarding waste generation and management.

Canada↗

Para-chlorophenol containing synthetic wastewater treatment in an activated sludge unit: effects of hydraulic residence time.

Due to the toxic nature of chlorophenol compounds present in some chemical industry effluents, biological treatment of such wastewaters is usually realized with low treatment efficiencies. Para-chlorophenol (4-chlorophenol, 4-CP) containing synthetic wastewater was treated in an activated sludge unit at different hydraulic residence times (HRT) varying between 5 and 30 h while the feed COD (2500 mg l(-1)), 4-CP (500 mg l(-1)) and sludge age (SRT, 10 days) were constant. Effects of HRT variations on COD, 4-CP, toxicity removals and on settling characteristics of the sludge were investigated. Percent COD removals increased and the effluent COD concentrations decreased when HRT increased from 5 to 15 h and remained almost constant for larger HRT levels. Nearly, 91% COD and 99% 4-CP removals were obtained at HRT levels above 15 h. Because of the highly concentrated microbial population at HRT levels of above 15 h, low effluent (reactor) 4-CP concentrations and almost complete toxicity removals were obtained. High biomass concentrations obtained at HRT levels above 15 h were due to low 4-CP contents in the aeration tank yielding negligible inhibition effects and low maintenance requirements. The sludge volume index (SVI) decreased with increasing HRT up to 15 h due to high biomass concentrations at high HRT levels resulting in well settling sludge with low SVI values. Hydraulic residence times above 15 h resulted in more than 90% COD and complete 4-CP and toxicity removals along with well settling sludge.

Bacteria↗

Solid olive waste in environmental cleanup: oil recovery and carbon production for water purification.

A potentially-economic three-fold strategy, to use solid olive wastes in water purification, is presented. Firstly, oil remaining in solid waste (higher than 5% of waste) was recovered by the Soxhlet extraction technique, which can be useful for the soap industry. Secondly, the remaining solid was processed to yield relatively high-surface area active carbon (AC). Thirdly, the resulting carbon was employed to reversibly adsorb chromate ions from water, aiming to establish a water purification process with reusable AC. The technique used here enabled oil recovery together with the production of a clean solid, suitable for making AC. This process also has the advantage of low production cost.

Adsorption↗

Confronting limitations: new solutions required for urban water management in Kunming City.

Despite continuous investment and various efforts to control pollution, urban water environments are worsening in large parts of the developing world. In order to reveal potential constraints and limitations of current practices of urban water management and to stimulate proactive intervention, we conducted a material flow analysis of the urban water system in Kunming City. The results demonstrate that the current efficiency of wastewater treatment is only around 25% and the emission of total phosphorous from the city into its receiving water, Dianchi Lake, is more than 25 times higher than its estimated tolerance. With regard to the crisis of water quantity and quality, the goal of a sustainable urban water environment cannot be attained with the current problem-solving approach in the region due to the technical limitations of the conventional urban drainage and treatment systems. A set of strategies is therefore proposed. The urban drainage system in Zurich is used as a reference for a potential best-available technology for conventional urban water management (BAT) scenario in terms of its low combined frequency of sewer overflow.

Cities↗

Kinetic and equilibrium isotherm studies for the adsorptive removal of Brilliant Green dye from aqueous solution by rice husk ash.

The present study deals with the adsorption of Brilliant Green (BG) on rice husk ash (RHA). RHA is a solid waste obtained from the particulate collection equipment attached to the flue gas lines of rice husk fired boilers. Batch studies were performed to evaluate the influences of various experimental parameters like initial pH (pH0), contact time, adsorbent dose and initial concentration (C0) on the removal of BG. Optimum conditions for BG removal were found to be pH0 approximately 3.0, adsorbent dose approximately 6 g L(-1) of solution and equilibrium time approximately 5 h for the C0 range of 50-300 mg L(-1). Adsorption of BG followed pseudo-second-order kinetics. Intra-particle diffusion does not seem to control the BG removal process. Equilibrium isotherms for the adsorption of BG on RHA were analyzed by Freundlich, Langmuir, Redlich-Peterson (R-P), Dubnin-Radushkevich (D-R), and Temkin isotherm models using a non-linear regression technique. Langmuir and R-P isotherms were found to best represent the data for BG adsorption onto RHA. Adsorption of BG on RHA is favourably influenced by an increase in the temperature of the operation. Values of the change in entropy (DeltaS0) and heat of adsorption (DeltaH0) for BG adsorption on RHA were positive. The high negative value of change in Gibbs free energy (DeltaG0) indicates the feasible and spontaneous adsorption of BG on RHA.

Adsorption↗

Performance optimization of coagulant/flocculant in the treatment of wastewater from a beverage industry.

This study investigated the effect of coagulation/flocculation treatment process on wastewater of Fumman Beverage Industry, Ibadan, Nigeria. The study also compared different dosages of coagulant, polyelectrolyte (non-ionic polyacrylamide) and different pH values of the coagulation processes. The effect of different dosages of polyelectrolyte in combination with coagulant was also studied. The results reveal that low pH values (3-8), enhance removal efficiency of the contaminants. Percentage removal of 78, 74 and 75 of COD, TSS and TP, respectively, were achieved by the addition of 500 mg/L Fe2(SO4)3.3H2O and 93, 94 and 96% removal of COD, TSS and TP, respectively, were achieved with the addition of 25 mg/L polyelectrolyte to the coagulation process. The volume of sludge produced, when coagulant was used solely, was higher compared to the use of polyelectrolyte combined with Fe2(SO4)3.3H2O. This may be as a result of non-ionic nature of the polyelectrolyte; hence, it does not chemically react with solids of the wastewater. Coagulation/flocculation may be useful as a pre-treatment process for beverage industrial wastewater prior to biological treatment.

Beverages↗

Accelerated carbonation for treatment of MSWI bottom ash.

Leaching of heavy metals from MSWI bottom ash exceeds some of the Flemish limit values for recycling the material as granular construction application. In particular, leaching of Cu, Zn and Pb often exceeds the limit value, with Cu being the most critical. In order to recycle bottom ash, treatment is therefore required. The bottom ash studied was divided on-site into four fractions using a large-scale wet sieving installation: a sludge fraction (Ø 0-0.1mm), a sand fraction (Ø 0.1-2mm) and two gravel fractions (Ø 2-6 and 6-50mm). The two gravel fractions complied with the limit values after 3 months of natural ageing. The sand and sludge fraction did not reach the limit value for Cu. Four weeks of accelerated carbonation resulted in an important decrease of Cu leaching from these two fractions, although the limit value is still exceeded. In view of applying carbonation as one of the treatment methods in an integrated industrial application, two tests were additionally performed. The use of stack gas as carbonating medium was verified by setting up an accelerated carbonation experiment at the incineration plant. Also, the depth of carbonation was measured in a 10 cm thick sample of the sand fraction after different periods of treatment. After 3 months of natural ageing only the upper 4 cm underwent a significant carbonation, while after one week of accelerated carbonation the total sample was carbonated. A model was developed to predict these experimental results.

Carbon↗