Search PubMed⌕ Search

SEARCH · Search PubMed

Results for “Photolysis”

Search indexed PubMed citations on genomics, clinical trials, systematic reviews and public health. Explore titles, authors and supplied subject terms, then open the PubMed record.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2Linked to original sources

Vector properties of the O(1D2) fragment produced from the photolysis of ozone in the wavelength range of 298 to 320 nm.

The speed averaged translational anisotropy and electronic angular momentum polarization of the O(1D2) atomic fragment formed from the photodissociation of ozone in the atmospherically important long wavelength region of the Hartley band (298 to 320 nm) have been measured using resonance enhanced multiphoton ionization time of flight mass spectrometry. The translational anisotropy parameter, beta, is found to decline from 1.1 for photolysis at 300 nm to a minimum value of 0 at 310 nm which is the threshold for production of O(1D2) in conjunction with the O2(a 1Deltag v = 0) molecular cofragment. For photolysis wavelengths greater than 310 nm, O(1D2) is formed from the dissociation of internally excited ozone molecules. The corresponding beta parameters are markedly lower than for atomic fragments produced with the same speed from the photolysis of ground state ozone molecules. This result is consistent with two different pathways contributing to the photolysis of internally excited ozone at the longest wavelengths studied corresponding to initial internal excitation either in the symmetric or asymmetric stretching vibration. In addition, the polarization of the atomic angular momentum has been determined with the incoherent polarization parameters a0(2)(||) and a0(2)(_|) increasing from values of -0.53 and -0.62 at 300 nm to -0.37 and -0.19 at 317 nm, consistent with the increasing contribution from the photolysis of internally excited ozone as the dissociation wavelength lengthens. Evaluation of these alignment parameters allows the populations of the magnetic substrates, mj, to be determined. For example, for a photolysis wavelength of 303 nm the populations of mj = 0, +/- 1, +/- 2 are in the ratio of 0.36: 0.56: 0.08 and this ratio is essentially independent of the photolysis wavelength. The coherent contribution to the atomic polarization is quantified by the Re{a1(2)(||, _|)} and Im{a1(1)(||, _|)} parameters and these are found to vary from -0.21 and 0.21 at 300 nm to -0.04 and 0.24 at 313 nm, respectively.

Journal Article↗

A protein radical cage slows photolysis of methylcobalamin in methionine synthase from Escherichia coli.

Methionine synthase from Escherichia coli is a B12-dependent enzyme that utilizes a methylcobalamin prosthetic group. In the catalytic cycle, the methyl group of methylcobalamin is transferred to homocysteine, generating methionine and cob(I)-alamin, and cob(I)alamin is then remethylated by a methyl group from methyltetrahydrofolate. Methionine synthase occasionally undergoes side reactions that produce the inactive cob(II)alamin form of the enzyme. One such reaction is photolytic homolysis of the methylcobalamin C-Co bond. Binding to the methionine synthase apoenzyme protects the methylcobalamin cofactor against photolysis, decreasing the rate of this reaction by approximately 50-fold. The X-ray structure of the cobalamin-binding region of methionine synthase suggests how the protein might protect the methylcobalamin cofactor in the resting enzyme. In particular, the upper face (methyl or beta face) of the cobalamin cofactor is in contact with several hydrophobic residues provided by an alpha-helical domain, and these residues could slow photolysis by caging the methyl radical and favoring recombination of the CH3./cob(II)alamin radical pair. We have introduced mutations at three positions in the cap domain; phenylalanine 708, phenylalanine 714, and leucine 715 have each been replaced by alanine. Calculations based on the wild-type structure predict that two of these three mutations (Phe708Ala and Leu715Ala) will increase solvent accessibility to the methylcobalamin cofactor, and in fact these mutations result in dramatic increases in the rate of photolysis. The third mutation, Phe714Ala, is not predicted to increase the accessibility of the cofactor and has only a modest effect on the photolysis rate of the enzyme. These results confirm that the alpha-helical domain covers the cofactor in the resting methylcobalamin enzyme and that residues from this domain can protect the enzyme against photolysis. Further, we show that binding the substrate methyltetrahydrofolate to the wild-type enzyme results in a saturable increase in the rate of photolysis, suggesting that substrate binding induces a conformational change in the protein that increases the accessibility of the methylcobalamin cofactor.

5-Methyltetrahydrofolate-Homocysteine S-Methyltran↗

Kinetics of prephosphorylation reactions and myosin light chain phosphorylation in smooth muscle. Flash photolysis studies with caged calcium and caged ATP.

The pre-myosin light chain (MLC20) phosphorylation components of the lag phase (td) of contractile activation were determined in permeabilized smooth muscles activated by photolytic release of ATP from caged ATP and/or Ca2+ from 4-(2-nitrophenyl)-EGTA (NP-EGTA). Calmodulin (CaM) shortened the td (470 ms at 0 added CaM) that followed Ca2+ release, but its effect (td = approximately 200 ms) saturated at 40 microM. Photolysis of caged ATP following preequilibration with identical [Ca4CaM] shortened td to 41 ms. The rate of phosphorylation was very fast (3.5 s-1 at 22 degrees C in the presence of 5 microM exogenous CaM) following photolysis of caged ATP, and, following Ca2+ release, phosphorylation was accelerated by CaM. Simultaneous photolysis of caged ATP and NP-EGTA was followed by a td of 194 ms at 5 microM CaM and a rate of MLC20 phosphorylation intermediate between these parameters following photolysis of, respectively, NP-EGTA and caged ATP. In the presence of the normal, total endogenous CaM content (37 +/- 4 microM) of protal vein smooth muscles td was 565 ms. Steady state maximum force at pCa 5.5 was increased by much lower (100 nM) exogenous [CaM] than was required (> 2.5 microM) to shorten the td. We estimate the endogenous CaM available under steady state conditions in vivo to be approximately 0.25 microM and probably less during a rapid Ca2+ transient. We conclude that the [CaM] dependence of the kinetics of MLC20 phosphorylation and force development (t1/2 and td) initiated by Ca2+ reflects the recruitment of a slowly diffusible component of total CaM. The relatively long duration of td (197 ms) at saturating [CaM] suggests the contribution to td of an additional component, possibly a prephosphorylation activation/isomerization of the Ca4CaM myosin light chain kinase complex (Török, K., and Trentham, D. R. (1994) Biochemistry 33, 12807-12820). The relatively short delay (108 ms in the presence of 40 microM CaM) following simultaneous photolysis of NP-EGTA and caged ATP suggests that preincubation with ATP (prior to photolysis of NP-EGTA) may inhibit the formation of a preactive Ca2CaM myosin light chain kinase complex.

Adenosine Triphosphate↗

Photolysis behavior of herbicide propisochlor in water media and preliminary analysis of photoproducts under different light sources.

Photolysis behavior of a new herbicide propisochlor in water media as well as the effects of light sources, initial concentration of propisochlor, pH value, dissolved oxygen (DO) level, and salinity on the photolysis process was investigated. It was found that the relationship between initial concentration of propisochlor and its photodegradation rate was negatively correlated. The changes in acidity and alkalinity of the reaction medium influenced the photoreaction rate evidently. In the alkaline solution the degradation was accelerated. In the reaction media with different pH values, the photolysis followed the first-order kinetics. The presence of dissolved oxygen may promote the photolysis and there existed an optimum of dissolved oxygen concentrations. Increasing the DO level can weaken the promotion and even have an adverse effect. It was demonstrated that with dissolved oxygen the photodegradation of propisochlor followed the first-order kinetics equation. The addition of salt ions Ca2+ and Mg2+ changed the ionic strength and solvent polarity, resulting in the effect on propisochlor photolysis. The photoproducts were detected by both HPLC and GC-MS methods. It was found that photolysis products varied under different light sources. Conclusions may be reached that in the photodegradation of propisochlor, the benzene ring remained intact under irradiation of both solar light and high-pressure mercury lamp, and the amido link was relatively stable, while dechlorination was liable to take place; moreover, alpha-hydrogen at the substituent of benzene ring was active.

Acetamides↗

Elimination of residual tumor cells from autologous bone marrow grafts by dye-mediated photolysis: preclinical data.

MC540-mediated photolysis has several features that make it potentially attractive as a clinical purging procedure. (1) The experience with experimental tumors suggests that MC540-mediated photolysis is effective against a broad range of leukemias and solid tumors, including drug-resistant tumors (Sieber et al., 1984b). Drug-resistant tumor cells are likely to occur in heavily pretreated patients. (2) MC540-mediated photolysis is not cell-cycle dependent (Manna and Sieber, 1985). It kills both resting and cycling cells. In this regard, MC540-mediated photolysis is a valuable complement to cell-cycle specific cytotoxic drugs. (3) There is a large differential in sensitivity between normal pluripotent hematopoietic stem cells and leukemia and neuroblastoma cells. (4) The mechanism of action of MC540-mediated photolysis is different from that of lectins, antibodies and most cytotoxic drugs. MC540 binds to the lipid portion of the plasma membrane and membrane lipids are probably a primary target of the toxic photoproducts. Antibodies and lectins react with proteins and carbohydrates and most drugs have intracellular targets (e.g., nuclear DNA). We would therefore expect little cross-resistance if MC540-mediated photolysis were used in combination with other purging procedures.(5) The small amounts of dye that remain associated with the marrow graft and are infused into the patient are approximately 100,000-fold less than the LD(10) (in mice) and therefore unlikely to cause any harm. The outcome of the first clinical application of the technique supports this view (Sieber et al., 1986c). A better understanding of the underlying molecular mechanisms will undoubtedly lead to more effective applications of the technique and perhaps to the identification of more potent analogs of MC540.

Bone Marrow↗

Calcium released by photolysis of DM-nitrophen triggers transmitter release at the crayfish neuromuscular junction.

1. Spontaneous and evoked transmitter release at the crayfish neuromuscular junction were potentiated in response to photolytic release of calcium from the 'caged' calcium compound DM-nitrophen, which had previously been injected into presynaptic terminals. 2. The amount of calcium released from DM-nitrophen photolysis depends on the concentration of DM-nitrophen, its photoproducts, Ca2+, Mg2+, H+, ATP and the cell's native buffer. Since none of these are known in the crayfish terminal, the study was conducted in a qualitative fashion. 3. Photolytic release of calcium from DM-nitrophen increased excitatory junctional potentials (EJPs) by a range of 2-31 times over control values and the miniature excitatory junctional potential (MEJP) frequency increased from resting values of 1-10 quanta/s to 3000-11,000 quanta/s. 4. Extracellular calcium was not required for the light-evoked asynchronous release of transmitter. Calcium-bound DM-nitrophen previously pressure injected into crayfish presynaptic terminals increased the MEJP frequency from resting values of 1-8 quanta/s to 800-10,000 quanta/s during photolysis in a calcium-free cobalt Ringer solution. 5. Iontophoresis of calcium-free DM-nitrophen into presynaptic terminals released transmitter upon photolysis, but only in a calcium-containing Ringer solution. This suggests that DM-nitrophen is capable of binding calcium once injected into terminals, but this is dependent on the presence of external calcium. 6. Photolysis of DM-nitrophen at lower light intensities produced a slower rate of transmitter release. 7. Brief light exposures, i.e. those which photolysed 5-20% of the DM-nitrophen, resulted in a rapid decay of postsynaptic responses on extinguishing the light, due to rebinding of photolytically released calcium to unphotolysed DM-nitrophen. Longer light exposures which completely photolysed DM-nitrophen, leaving only the low affinity photoproducts, produced a slow decay of transmitter release after the light pulse, presumably due to the active extrusion of calcium from the presynaptic terminals. 8. During photolysis of DM-nitrophen, the time courses of changes in EJP amplitude and MEJP frequency were different, indicating that the two measures of transmitter release were not linearly related. 9. MEJP frequency and EJP amplitudes during DM-nitrophen photolysis were fitted to a 'non-linear summation model' in which photolytically released calcium sums with calcium entering during an action potential to evoke transmitter release with a calcium co-operativity of five.

Acetates↗

[Photolysis kinetics of propisochlor in water].

Propisochlor in water was irradiated at room temperature by a 400 W high pressure mercury lamp and sunlight, respectively. Influence of light and initiative concentration of propisochlor on the photolysis were studied. The results showed that under the irradiation of sunlight the photolysis fitted first order kinetics with only 5.5% degradation after one hour's irradiation in the quartz tube, that was a slow rate; while under the irradiation of high pressure mercury lamp the photolysis can be described by a double-chamber model, in which the degradation rate can reach 80.9% after 1 h. The higher the initiative concentration of propisochlor was, the slower the photolysis rate became, and the photolysis of propisochlor was influenced by the increasing photo-products. The six main photodegradation products were identified using GC-MS method. The aromatic ring was proved to be intact during the process. And the photolysis mechanism was then assumed on the basis of the photo-products detected.

Acetamides↗

Photolysis of caged Ca2+ facilitates and inactivates but does not directly excite light-sensitive channels in Drosophila photoreceptors.

Substantial evidence implicates the phosphoinositide cascade in invertebrate phototransduction, but the final pathway of excitation remains obscure. In order to test the hypothesis that Ca2+ is the excitatory messenger rapid concentration jumps of cytosolic Ca2+ were achieved in dissociated Drosophila photoreceptors by flash photolysis of the caged Ca2+ compounds DM-nitrophen and nitr-5. Both compounds were introduced via patch pipettes used to record whole-cell currents. Calibrations using INDO-1 and Mag-INDO-1 indicated that photolysis of DM-nitrophen (5 mM loaded with 4 mM Ca2+), raised Ca, to ca. 20-50 microM, and nitr-5 (same loading) to ca. 1-2 microM. In mutants lacking light responses (ora, lacking rhodopsin; norpA, lacking phospholipase C; trp, which is inactivated by conditioning lights), the only current evoked by photolysis of DM-nitrophen was a small inward current with no detectable latency. This current did not reverse at +80 mV and was blocked by substitution of external Na+ for Li+, suggesting it represents activation of an electrogenic Na+/Ca2+ exchanger. A similar current was also the only current elicited by caged Ca2+ during the 5 msec latent period in wild type (WT) photoreceptors. To investigate possible modulatory effects of caged Ca2+ on the light-activated conductance, cells were first stimulated with a saturating light stimulus, itself incapable of releasing significant Ca2+, and then the photolytic flash was discharged during the response. During the rising phase of the response, photolysis of DM-nitrophen (but not nitr-5) induced a pronounced facilitation in WT photoreceptors. When photolysed during the plateau phase both DM-nitrophen and nitr-5 induced a rapid inactivation of the light-induced current. By contrast, in trp photoreceptors, which lack one class of Ca2+ permeable light-sensitive channel, photolysis of DM-nitrophen induced a significant facilitation during the falling phase of the response, but during the rising phase photolysis significantly depressed the overall response. In conclusion, caged Ca2+ failed to activate any channels in Drosophila photoreceptors but profoundly affected the light-dependent channels once they have been activated.

Acetates↗

Direct photolysis of estrogens in aqueous solutions.

Direct photolysis of two estrogens 17beta-estradiol (E2) and estrone (E1) in aqueous solutions radiated by UV-light and UV-Vis-light was studied preliminarily. The results suggest that the photolysis of E2 in aqueous solutions occurs under irradiation with UV disinfection lamp (lambda = 254 nm, 30 W), while E1 can also undergo photolysis under irradiation with a high-pressure mercury lamp (lambda > or = 365 nm, 125 W). The photolysis reactions of E2 and E1 at the concentration of 3.0-20 mgl(-1) in aqueous solutions were all in accordance with pseudo-first-order law. The photolysis rate of estrogens in aqueous solutions reached the lowest value at pH approximately 5.0, while the highest at pH 8.0 over the range of 2.0-8.0. The higher the initial concentration of the two estrogens, the lower the rate of photolysis.

Estradiol↗

Solar photolysis of CH2I2, CH2ICl, and CH2IBr in water, saltwater, and seawater.

Ultraviolet-visible absorption spectroscopy and purge-and-trap GC-MS were used to determine the rates and products of the photodissociation of low concentrations of CH2I2, CH2IBr, and CH2ICl in water, saltwater (0.5 M NaCl), and seawater in natural sunlight. Photoproducts of these reactions include iodide (I-) and, in salt- and seawater environments, CH2XCl (where X = Cl, Br, or I). Thus, CH2ICl was produced during CH2I2 photolysis (with a molar yield of 35 +/- 20%), CH2BrCl from CH2IBr photolysis, and CH2Cl2 from CH2ICl photolysis (in lower yields of 6-10%). Formation of these chlorine-atom-substituted products may be via direct reaction of Cl- with either (A) the isopolyhalomethane photoisomer or associated ion pair (e.g., CH2I+-I-) or (B) the initially produced CH2I. photofragment. Estimated quantum yields for photodissociation were 0.62 +/- 0.09, 0.17 +/- 0.03, and 0.26 +/- 0.06 for CH2I2, CH2IBr, and CH2ICl, respectively, in 0.5 M NaCl, with only small differences from these values in water and seawater. The much higher quantum yield of CH2I2 photolysis compared to CH2IBr and CH2ICl photolysis may be explained by the higher yield of the isodiiodomethane photoisomer of CH2I2, resulting in reduced geminate recombination of the initially produced radical photofragments back to the parent molecule. We use a radiative transfer model with measured absorption cross-sections in saltwater to calculate seasonal values of CH2I2, CH2IBr, and CH2ICl photodissociation in surface seawater at midlatitudes (50 degrees N) and show that a significant proportion of CH2ICl in surface seawater may arise from CH2I2 photodecomposition. We also suggest that surface seawater photolysis of CH2I2 over an 8 h period may contribute up to approximately 10% of the surface seawater I- levels, with implications for the increased deposition of O3 to the surface ocean.

Gas Chromatography-Mass Spectrometry↗

On-Line Monitoring of the Photolysis of Benzyl Acetate and 3,5-Dimethoxybenzyl Acetate by Membrane Introduction Mass Spectrometry.

Membrane introduction mass spectrometry (MIMS) allows on-line monitoring of the products of photolysis (254 nm) of benzyl acetate in aqueous methanol and 3,5-dimethoxybenzyl acetate in water. The reaction mixture is continuously exposed to a silicone membrane through which analyte molecules permeate into a triple quadrupole mass spectrometer for qualitative and quantitative analysis. Ionization is achieved by either isobutane or ammonia chemical ionization, and ions characteristic of the reactant ester and its products are monitored simultaneously and continuously. Three products, benzyl methyl ether, ethylbenzene, and bibenzyl are observed in the benzyl acetate photolysis. Two products, 3,5-dimethoxybenzyl alcohol and 3,5-dimethoxyethylbenzene, are formed in the photolysis of 3,5-dimethoxybenzyl acetate. Quantitation is achieved through calibration using external standard solutions and, in the case of benzyl methyl ether, tandem mass spectrometry is used to verify product identification. During the photolysis of benzyl acetate, benzyl methyl ether and ethylbenzene are produced at onset with similar efficiencies. For the 3,5-dimethoxy ester photolysis, performed in aqueous solution, the efficiency of formation of the polar product 3,5-dimethoxybenzyl alcohol is about 300 times greater than that of the nonpolar product 3,5-dimethoxyethylbenzene. The results show that the relative reaction rates are dependent on the solvent and on the photon intensity and are consistent with earlier off-line experiments by Pincock et al. which showed that the photolysis proceeds through both ion and radical pair intermediates. To the best of our knowledge, the work reported here describes the first analysis of the photochemistry of an aralkyl ester in water and the first use of on-line mass spectrometry in a mechanistic study.

Journal Article↗

Mass-dependent and non-mass-dependent isotope effects in ozone photolysis: resolving theory and experiments.

In addition to the anomalous (17)O and (18)O isotope effects in the three-body ozone formation reaction O+O(2)+M, isotope effects in the destruction of ozone by photolysis may also play a role in determining the isotopic composition of ozone and other trace gases in the atmosphere. While previous experiments on ozone photolysis at 254 nm were interpreted as evidence for preferential loss of light ozone that is anomalous (or "non-mass-dependent"), recent semiempirical theoretical calculations predicted a preferential loss of heavy ozone at that wavelength that is mass dependent. Through photochemical modeling results presented here, we resolve this apparent contradiction between experiment and theory. Specifically, we show that the formation of ozone during the UV photolysis experiments is not negligible, as had been assumed, and that the well-known non-mass-dependent isotope effects in ozone formation can account for the non-mass-dependent enrichment of the heavy isotopologs of ozone observed in the experiment. Thus, no unusual non-mass-dependent fractionation in ozone photolysis must be invoked to explain the experimental results. Furthermore, we show that theoretical predictions of a mass-dependent preferential loss of the heavy isotopologs of ozone during UV photolysis are not inconsistent with the experimental data, particularly if mass-dependent isotope effects in the chemical loss reactions of ozone during the photolysis experiments or experimental artifacts enrich the remaining ozone in (17)O and (18)O. Before the calculated fractionation factors can be quantitatively evaluated, however, further investigation of possible mass-dependent isotope effects in the reactions of ozone with O((1)D), O((3)P), O(2)((1)Delta), and O(2)((1)Sigma) is needed through experiments we suggest here.

Journal Article↗

Two-photon microscopy: imaging in scattering samples and three-dimensionally resolved flash photolysis.

Two-photon molecular excitation microscopy has several advantages over conventional confocal fluorescence microscopy, including the ability to section deeper into scattering samples and to allow spatially resolved flash photolysis. We describe and examine the benefit of incorporating non-descanned fluorescence detection in our microscope system. In a scattering sample where almost no signal could be obtained at a depth of 50 microm with confocal detection, non-descanned detection resulted in an improvement of signal strength by more than an order of magnitude at depths >40 microm. The spatio-temporal properties of stationary spot two-photon excited flash photolysis (TPEFP) in drops of test solutions and cardiac myocytes were also examined. At input powers that produce >10% of the maximum rate of DM-nitrophen photolysis, serious photodestruction of the reporter fluorochrome (Fluo-3) at the photolysis spot occurred. At power levels of approximately 4 mW for periods <50 ms, we were able to produce small repeatable calcium release events using DM-nitrophen in cardiac myocytes, which were similar to naturally occurring calcium sparks. The properties of these artificial calcium sparks were very similar to signals obtained from drops of test solutions, suggesting that the apparent rate of calcium diffusion in myocytes is similar to the rate of diffusion of Fluo-3 in solution. Using TPEFP, we also examined the ability of a combination of EGTA and a low-affinity calcium indicator to track the time course of calcium release. Although the addition of EGTA improved the temporal fidelity of the rise of the calcium signal, it did not significantly reduce the spread of the fluorescence signal from the photolysis spot.

Acetates↗

Ultraviolet flash photolysis of gramicidin-doped lipid bilayers.

We have examined the rate of gramicidin channel conductance inactivation by ultraviolet photolysis using 0.1 millisecond light flashes. The lower limit on the channel photolysis reaction rate has been reduced by four orders of magnitude over previous observations. Monoolein/hexadecane bilayers formed in 1.0 M KCl were doped with (1-3) x 10(6) gramicidin A' channels and exposed to a broad-spectrum light flash. The flash reduced membrane conductance abruptly by approx. 16%. Following the flash, a further slow reduction of approx. 3% was observed followed by a slow recovery of approx. 4%. The post-flash decay and recovery may be due to slow chemical reactions, conformational relaxations, or changes in the equilibrium between aqueous, lipid-bound, and channel-forming dimerized gramicidin. Under our experimental conditions, gramicidin M was insensitive to light flashes compared to gramicidin A', demonstrating that for gramicidin A' the photolysis mechanism depends specifically on the tryptophan side-chain. Flash photolysis of a membrane containing a small population of channels (approx. 30) indicated that the decay is due to the sudden inactivation of several channels. The recovery appears to result from insertion of normal channels into the membrane. Flash photolysis of single-channel membranes showed that the flash causes abrupt, complete channel inactivation.

Electric Conductivity↗

Laboratory simulations of PH3 photolysis in the atmospheres of Jupiter and Saturn.

Photolysis of NH3-PH3 mixtures (11 Torr) at 175 degrees K resulted in the same initial rate of P2H4 formation as when the 11 Torr of pure PH3 was photolyzed. A higher yield of P2H4 is obtained at 175 degrees K than at 298 degrees K because some of the P2H4 condenses on the cell wall at 175 degrees K and is not subject to further reaction. Some reaction of P2H4 is taking place as observed by the decrease in its yield and on the formation of red phosphorus on extended photolysis of PH3 at 175 degrees K. No NH2PH2 or (PN)x were detected as photoproducts as indicated by the absence of change in the UV spectral properties of the P2H4 and red phosphorus fraction, respectively, when HN3 is present. Although the pathway for PH3 decomposition is changed, the outcome of the photochemical process is essentially the same in the absence or presence of NH3. The formation of P2H4 and red phosphorus was not inhibited by small amounts of C2H4 and C2H2, so the low levels of hydrocarbons on Jupiter and Saturn will not have a significant effect on the course of PH3 photolysis. The ratio of products of PH3 photolysis are only slightly affected by the wavelength of light used. Use of a xenon lamp, with a continuous emission in the ultraviolet where P2H4 absorbs, results in only a modest decrease in the yield of P2H4 and a modest increase in the rate of formation of red phosphorus as compared to the rates observed with a 206.2-nm light source. The quantum yield for P2H4 formation is pressure independent in the 0.5-11 Torr range. This quantum yield is not affected by lowering the temperature to 157 degrees K or by the addition of 100 Torr of H2. It is concluded that photolysis of PH3 to P2H4 and the subsequent conversion of P2H4 to red phosphorus are likely processes on Jupiter and Saturn and that particles of P2H4 condense in the atmospheres of these planets. The conversion of some of the P2H4 to red phosphorus may take place on Jupiter.

Ammonia↗

Optimization of post-column photolysis and electrochemical detection for the liquid chromatographic determination of 3-nitro-L-tyrosine.

A new post-column photolysis technology has been developed based on the use of a low pressure, low temperature UV lamp and TiO2 coated knitted reaction coil. As a test case the developed technique was used for the determination of 3-nitro-L-tyrosine by liquid chromatography with electrochemical detection. Different photolysis lamps and reactor tubing lengths were evaluated in terms of their effect on the separation efficiency and/or photolysis efficiency. A detection limit of 0.5 nM (10 fmol) for 3-nitro-L-tyrosine was achieved under optimized conditions, with a linear correlation coefficient of R2 = 0.9898 over a concentration range of 2-100 microM. Pre-injection photolysis of 3-nitro-L-tyrosine indicated that dihydroxyphenylalanine is the main photolysis product. In general, use of the photoreactor prior to liquid chromatography is an excellent method for exploring photodegradation products of an analyte in conjunction with the full range of available liquid chromatography detectors.

Animals↗

Is it possible to develop a QSPR model for direct photolysis half-lives of PAHs under irradiation of sunlight?

By the use of the partial least squares method and 11 fundamental quantum chemical descriptors computed from the PM3 Hamiltonian, a Quantitative Structure-Property Relationship model was obtained for direct photolysis half-lives of selected polycyclic aromatic hydrocarbons (PAHs) under irradiation of sunlight. Direct photolysis half-lives for some other PAHs without reported values were predicted. It was concluded from the model that the main factors affecting photolysis half-lives of PAHs under irradiation of sunlight are PAH absolute hardness and electronegativity, which are related to the energy difference between the lowest unoccupied molecular orbital and the highest occupied molecular orbital, (Elumo - Ehomo) and (Elumo + Ehomo), respectively. Increasing Ehomo and the average molecular polarizability (alpha) values of the PAHs leads to decrease of photolysis half-lives. Increasing (Elumo - Ehomo) and Elumo values of the PAHs leads to an increase of the PAH photolysis half-lives.

Environmental Pollutants↗

Early photolysis intermediates of gecko and bovine artificial visual pigments.

Nanosecond laser photolysis measurements were conducted on digitonin extracts of artificial pigments prepared from the cone-type visual pigment, P521, of the Tokay gecko (Gekko gekko) retina. Artificial pigments were prepared by regeneration of bleached gecko photoreceptor membranes with 9-cis-retinal, 9-cis-14-methylretinal, or 9-cis-alpha-retinal. Absorbance difference spectra were recorded at a sequence of time delays from 30 ns to 60 microseconds following excitation with a pulse of 477-nm actinic light. Global analysis showed the kinetic data for all three artificial gecko pigments to be best fit by two-exponential processes. These two-exponential decays correspond to similar decays observed after photolysis of P521 itself, with the first process being the decay of the equilibrated P521 Batho<-->P521 BSI mixture to P521 Lumi and the second process being the decay of P521 Lumi to P521 Meta I. In spite of its large blue shift relative to P521, iso-P521 displays a normal chloride depletion induced blue shift. Iso-P521's early intermediates up to Lumi were also blue-shifted, with the P521 Batho<-->P521 BSI equilibrated mixture being 15 nm blue-shifted and P521 Lumi being 8 nm blue-shifted relative to the intermediates formed after P521 photolysis. The blue shift associated with the iso-pigment is reduced or disappears entirely by P521 Meta I. Similar blue shifts were observed for the early intermediates observed after photolysis of bovine isorhodopsin, with the Lumi intermediate blue-shifted 5 nm compared to the Lumi intermediate formed after photolysis of bovine rhodopsin. These shifts indicate that a difference exists between the binding sites of 9- and 11-cis pigments which persists for microseconds at 20 degrees C.

Animals↗