Search PubMed⌕ Search

SEARCH · Search PubMed

Results for “Odontometry”

Search indexed PubMed citations on genomics, clinical trials, systematic reviews and public health. Explore titles, authors and supplied subject terms, then open the PubMed record.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2Linked to original sources
PubMed2003

Macroscopic and microscopic analyses of linear enamel hypoplasia in Plio-Pleistocene South African hominins with respect to aspects of enamel development and morphology.

This study uses macroscopic and microscopic methods to analyze the expression of linear enamel hypoplasia (LEH) in Plio-Pleistocene South African hominins. LEH is a developmental defect of enamel that is used in many anthropological contexts as a physiological stress indicator. Previous research has not settled the question as to whether differences in LEH expression exist between Paranthropus and Australopithecus and if they exist, to what extent these differences might be explained simply by taxonomic differences in enamel development and morphology rather than by differential stress experience. In this study, the analysis of LEH is conducted with respect to differences between Paranthropus and Australopithecus in aspects of enamel development and morphology that are thought to influence LEH expression. Two factors impacting LEH expression are considered: the duration of enamel formation, and the spacing of perikymata. It is predicted that if the first factor strongly influences the expression of LEH, then there should be fewer defects per tooth in Paranthropus because of its abbreviated crown formation spans (and fast extension rates) relative to Australopithecus. It is also predicted that because Australopithecus has more densely packed perikymata in comparable regions of the crown than Paranthropus, this taxon should, on average, have narrower defects than Paranthropus. To address these questions, 200 Australopithecus and 137 Paranthropus teeth were examined for LEH, and the analysis of defect width with respect to perikymata spacing was conducted on tooth impressions examined under a scanning electron microscope using INCA (Oxford Instruments) measurement software. Data support the first prediction: Australopithecus does have significantly more defects per canine tooth than Paranthropus. Data do not support the second prediction in large part because several Australopithecus specimens have wide groove defects in which perikymata are not visible and enamel is irregular. Such wide grooves are not predicted by perikymata spacing such that alternative explanations, including taxonomic differences in ameloblast sensitivity and the duration/severity of disruptions to enamel growth, must be considered.

Animals↗
PubMed2003

Differential phenotypic variability among the Apalachee mission populations of La Florida: a diachronic perspective.

Phenotypic variability is evaluated in a series of skeletal samples from the Apalachee region of Florida. Based on ethnohistoric evidence, several predictive models for changes in variability are generated. If variability decreases through time, this likely represents the effect of genetic drift in populations experiencing epidemic disease and population loss. If variability increases through time, this suggests that population aggregation or genetic admixture were primary factors shaping the Apalachee population during the mission period. Dental dimensions were collected from a series of precontact (pre-1500), early mission (AD 1633-1650) (San Pedro y San Pablo de Patale), and late mission (post-1657) (San Luis) samples from the Apalachee region and were subjected to univariate and multivariate variability analyses. The results indicate that the late mission San Luis sample was significantly more variable than the Patale or precontact samples; however, the Patale sample exhibited no significant variability change in comparison to the precontact population. This suggests that the missions initially effected limited change in genetic variability in the mission populations. However, San Luis was affected by either admixture or population aggregation to such a degree that the observed variation had increased beyond earlier levels. Given the limited historic evidence for population aggregation at this mission, and the comparatively large resident Spanish population, the increased variability may be indicative of admixture at this mission, and potentially at this mission only. Based on a limited data set, however, it appears that the mission period cannot be typified by a single evolutionary or historic process.

Analysis of Variance↗
PubMed2005

Enamel thickness of deciduous and permanent molars in modern Homo sapiens.

This study presents data on the enamel thickness of deciduous (dm2) and permanent (M1-M3) molars for a geographically diverse sample of modern humans. Measurements were recorded from sections through the mesial cusps of unworn teeth. Enamel is significantly thinner on deciduous than on permanent molars, and there is a distinct trend for enamel to increase in relative thickness from M1 to M3. The relatively thicker enamel of M2s and especially M3s can be related to the overall reduction in size of more distal molar crowns, which has been attained through a differential loss of the dentine component. Enamel tends to be thicker on the protocone than on the paracone, and thicker on the protoconid than on the metaconid, but its distribution is not wholly concordant with models that predict increased thickness as a means by which to counter heavier attritional loss on these "functional" cusps. Indeed, the thickness of enamel tends to be more variable on cusp tips and occlusal surfaces than over the lateral aspects of cusps. The proportionately thicker enamel over the lateral aspects of the protocone and protoconid more likely serves as a means to prolong functional crown life by preventing cusp fracture, rather than being an adaptation to increase the attritional longevity of wear facets. The present data suggest that the human dentition is not predisposed to develop a helicoidal wear plane through the disposition of molar enamel thickness.

Africa South of the Sahara↗
PubMed2004

Dental topography and molar wear in Alouatta palliata from Costa Rica.

Paleoprimatologists depend on relationships between form and function of teeth to reconstruct the diets of fossil species. Most of this work has been limited to studies of unworn teeth. A new approach, dental topographic analysis, allows the characterization and comparison of worn primate teeth. Variably worn museum specimens have been used to construct species-specific wear sequences so that measurements can be compared by wear stage among taxa with known differences in diet. This assumes that individuals in a species tend to wear their molar teeth in similar ways, a supposition that has yet to be tested. Here we evaluate this assumption with a longitudinal study of changes in tooth form over time in primates. Fourteen individual mantled howling monkeys (Alouatta palliata) were captured and then recaptured after 2, 4, and 7 years when possible at Hacienda La Pacifica in Costa Rica between 1989-1999. Dental impressions were taken each time, and molar casts were produced and analyzed using dental topographic analysis. Results showed consistent decreases in crown slope and occlusal relief. In contrast, crown angularity, a measure of surface jaggedness, remained fairly constant except with extreme wear. There were no evident differences between specimens collected in different microhabitats. These results suggest that different individual mantled howling monkeys wear their teeth down in similar ways, evidently following a species-specific wear sequence. Dental topographic analysis may therefore be used to compare morphology among similarly worn individuals from different species.

Alouatta↗
PubMed2004

Patterns of tooth crown size and shape variation in great apes and humans and species recognition in the hominid fossil record.

It has been suggested that patterns of craniodental variation in living hominids (Gorilla, Homo, Pan, and Pongo) may be useful for evaluating variation in fossil hominid assemblages. Using this approach, a fossil sample exhibiting a pattern of variation that deviates from one shared among living taxa would be regarded as taxonomically heterogeneous. Here we examine patterns of tooth crown size and shape variation in great apes and humans to determine 1) if these taxa share a pattern of dental variation, and 2) if such a pattern can reliably discriminate between samples that contain single species and those that contain multiple species. We use parametric and nonparametric correlation methods to establish the degree of pattern similarity among taxa, and randomization tests to assess their statistical significance. The results of this study show that extant hominids do not share a pattern of dental size variation, and thus these taxa cannot be used to generate expectations for patterns of size variation in fossil hominid species. The hominines (Gorilla, Homo, and Pan) do share a pattern of shape variation in the mandibular dentition; however, Pongo is distinct, and thus it is unclear which, if either, pattern should be expected in fossil hominids. Moreover, in this case, most combined-species samples exhibit patterns of shape variation that are similar to those for single hominine species samples. Thus, although a common pattern of shape variation is present in the mandibular dentition, it is not useful for recognizing taxonomically mixed paleontological samples.

Animals↗
PubMed2005

Alternative dental measurements: proposals and relationships with other measurements.

Most archaeological and fossil teeth are heavily worn, and this greatly limits the usefulness of tooth crown diameter measurements, as they are usually defined at the widest points of the crown. There are alternatives, particularly measurements at the cervix of the tooth, where the crown joints the root, and measurements along a diagonal axis in molars, that are much less affected by wear. These would allow a wider range of specimens to be included, e.g., in the study of dental reduction in Upper Palaeolithic and Mesolithic Homo sapiens. In addition, they would allow the little-worn teeth of children to be compared directly with well-worn teeth in adults. These alternatives, however, have been little used, and as yet there have not been any studies of the repeatability with which they can be measured, or of the extent to which they are related to the more usual crown diameters. The present study is based on a group of unworn teeth, where direct comparisons could be made between the alternative measurements, which are not much affected by wear, with the usual crown diameters, which are very much affected. In an interobserver-error study of this material, cervical and diagonal measurements could be recorded as reliably as the usual crown diameters. The buccolingual cervical measurement was strongly correlated with the normal bucclingual crown diameter in all teeth, whereas the mesiodistal cervical measurement was highly correlated with the normal mesiodistal crown diameter in incisors and canines, but less so in premolars and molars. The molar diagonal measurements showed high correlations with all other measurements. Crown areas (robustness index) calculated from the usual diameters were strongly correlated with crown areas calculated from cervical measurements, and crown areas calculated from molar diagonals were strongly correlated with both other areas. Despite the long usage of the more usual maximum crown diameters, the alternative dental measurements could be measured just as reliably, could record similar information about tooth crown size, and would be better measures for the worn dentitions seen in archaeological and fossil material.

Fossils↗
PubMed1975

Evolutionary dental changes.

In the evolution of primates there has been a tendency towards reduction in jaw length and prognathism, mandibular canine size and first molar cusp number, and third molar presence. These oral structures were contrasted, and compared with cranial size, body height and weight, and finger length in 118 males and 102 females of the Burlington Growth Centre. Body weight was significantly related to canine width and to jaw length and prognathism. These relationships were stronger in the males than in the females. The evolutionary reduction in these dental dimensions may result from an evolutionary reduction in genetically determined body size. In the males the number of molar cusps was related to finger length and cranial height. Agenesis of third molars was related to the length of the maxilla in both sexes. In the females, canine width was related to the number of cusps of the first molars, agenesis of third molars, and length of a finger. Simultaneous reductions in dental structures were more frequent in the females.

Adolescent↗
PubMed1975

The functional adaptations of primate molar teeth.

Measurements were taken on the upper and lower molars of 37 species of primates and one tupaiid to assess the relative importance of shearing, crushing and grinding features. Significant correlations were found between pairs of allometrically standardized dimensions which measure the same molar function (shearing, crushing, or grinding). Correlations between pairs of dimensions which do not measure the same function are not significant. Second molar adaptations for shearing, crushing, and grinding, as well as the length of the second lower molar, and the total surface of the post-canine dentition are negatively allometric with respect to metabolic rate. Species which take different proportions of fruit, leaves, and insects in their diets have different molar structure. Frugivores have small teeth for their adult body size with poorly developed shearing, crushing, and grinding features on their molars. By contrast, leaf-eating species tend to have large teeth for their adult body size with well developed shearing, crushing, and grinding. The second molars of insectivorous species were found to parallel closely those of leaf-eating species. The two groups are clearly distinguishable from the former on the basis of body size alone: the smallest living primate leaf-eater is on order of magnitude larger than the largest living primate insectivore.

Adaptation, Physiological↗
PubMed1975

Dental reduction and the probable mutation effect.

A recent test of the probable mutation effect can be interpreted to suggest the operations of mutations under conditions of reduced selection in the late Pleistocene reduction of the human dentition.

Animals↗
PubMed1976

The dentition of the Indian Knoll skeletal population: odontometrics and cusp number.

Data on the permanent dentition of 153 individuals from the well known Indian Knoll skeletal population are presented. Mesiodistal and buccolingual measurements were taken with a Helios dial caliper. Cusp number of maxillary and mandibular molars are recorded. The Indian Knoll dentition is larger than many modern groups but smaller than Australoid or Mesolithic groups. With the exception of maxillary 12, males have larger teeth than females in both dimensions. The lower canine is the most dimorphic tooth. Through rank order correlation, an association was shown between the sexual dimorphism of the mesiodistal and buccolingual dimensions. Compared to modern groups, the Indian Knoll population displays a moderate degree of sexual dimorphism in tooth size. In general, the coefficients of variation were greater for the more distal teeth within morphological classes. Amounts of size variability did not differ significantly between the sexes; moreover, rank order correlations indicated that patterns of variability in both dimensions were similar for males and females. The predominant cusp number pattern for upper molars is 4-3-3 and for lowers 5-5(4)-5. No sex differences were shown for cusp occurrence or bilateral asymmetry in cusp number.

Female↗
PubMed1976

A fossil hominid frontal from Velika Pećina (Croatia) and a consideration of Upper Pleistocene hominids from Yugoslavia.

Fossil hominid remains dating to the Upper Pleistocene in Yugoslavia are reviewed. Particular emphasis is placed on the assessment of a hominid frontal from the site of Velika Pećina in northwestern Croatia. This specimen represents the earliest absolutely-dated hominid associated with the Upper Paleolithic in Europe. Also the hominid material from the site of Veternica is discussed, and data are presented on the new remains from Sandalja. It is concluded that no Neandertal remains, except for Krapina, have been found in Yugoslavia.

Cephalometry↗
PubMed1976

The genetics of shovel shape in maxillary central incisors in man.

From dental casts of 94 parent-offspring and 127 full-sib pairs, sampled from two Chilean populations, shovelling indices are computed to measure the degree of shovelling of maxillary central incisors quantitatively. Genetic correlations are computed to determine the role of genetic factors in explaining the variation in this trait. Assuming only hereditary factors to be responsible for the transmission of shovel shape, 68% of total variability is ascribed to the additive effect of genes.

Anthropology, Physical↗
PubMed1976

Arch form, tooth size, and occlusomandibular kinesis in the Ceboidea.

Correlations between dental morphology, arch configuration, and jaw movement patterns were quantitatively investigated in 23 ceboid species to elucidate integrative aspects of occlusal functional anatomy in an adaptive and evolutionary context. Differential maxillary-mandibular arch widths are primary in guiding lateral jaw movements. These movements are characterized according to their associated condylar shifts as either predominantly translatory or rotational. Predominantly translatory movements result from peripheral contact relationships between maxillary arches which are considerably wider posteriorly than their opposing mandibular arches. The greatest degree of mandibular movement is in the molar region in functional association with wide "primitive" maxillary molars, narrow mandibular molars, constricted maxillary intercanine widths, and narrow maxillary incisors. In contrast, predominantly rotational masticatory jaw movements results from differential arch widths which are greatest in the maxillary canine and incisor regions. Here most jaw movement is in the anterior segment and this is reflected in small maxillary-mandibular molar widths differences, a high degree of premolarization, wide-set maxillary canine teeth, and wide maxillary incisors. Possible selectional factors in the putative evolution of rotational predominance in mastication from the more primitive translatory pattern are discussed.

Animals↗
PubMed1977

Tooth, chin, bone and body size correlations.

Correlations of size of teeth, chin, bone and body were investigated in 118 males and 102 females of the Burlington Growth Centre. In the males, the mesiodistal widths of the mandibular lateral incisors and canines were independently related to the thickness of the cortex of the second metacarpal and to body weight. Bone cortex thickness was significantly related to metacarpal width in males and to body weight in females. Chin depth of the males was significantly related to bone width and to body height, negatively related to tooth width when bone width or body weight was held constant in partial correlations. Bone width and length were significantly related to body height in both sexes.

Adolescent↗
PubMed1977

A gracile hominid cranium from upper member G of the Shungura formation, Ethiopia.

A fragmentary hominid cranium with teeth, specimen L.894-1, dating from 1.84 m.y. BP in the Shungura Formation at Omo, is described. From its dental and cranial morphology and because of similarities to Olduvai Hominids 24 and 13 and Sangiran 4, among others, it is concluded that the specimen represents a member of an early species of the genus Homo (Homo habilis or Homo modjokertensis). The specimen shows approximal grooving on the premolars, pre-mortem chipping of the molar enamel, foramina ovale and spinosum divided by the sphenosquamosal suture, limited pneumatization of the mastoid region, and a possible interparietal bone. Sedimentological, ostracod, pollen, macrofloral, and taphonomic data indicate that the paleo-environmental context was a savanna/grassland or savanna woodland on the margin of a saline lake.

Cephalometry↗
PubMed1977

Metric dental change in the European upper paleolithic and mesolithic.

Evolutionary trends for dental reduction are presented for European Upper Paleolithic and Mesolithic samples. The analysis demonstrates that the greatest decrease in tooth size occurs between the two divisions of the Upper Paleolithic, while little and insignificant change characterizes the Late Upper Paleolithic/Mesolithic transition. Trends for tooth size over this period indicate that (1) human evolution does not stop with the appearance of "anatomically modern Homo sapiens," (2) changes in tooth size fluctuate with increases in the efficiency and complexity of cultural systems, and (3) the Early Upper Paleolithic sample should be considered transitional between Wurm II European Neanderthals and later Upper Paleolithic and Mesolithic groups.

Biological Evolution↗
PubMed1977

Heat stress, fluctuating asymmetry and prenatal selection in the laboratory rat.

Recent studies have demonstrated that stress may increase the fluctuating asymmetry of teeth and limbs in laboratory animals. The present study investigates the effects of heat on such parameters. Pregnant laboratory rats are exposed to temperatures of 33 degrees C during gestation. Increases in fluctuating asymmetry of dental dimensions as well as bone density are found for the pups of such females when compared to unstressed controls. A general increase in limb lengths is also reported for young of heat stressed animals. Prenatal selection with differential survival is suggested as a possible explanation for differences found between the experimental and control animals.

Animals↗