Search PubMed⌕ Search

SEARCH · Search PubMed

Results for “METHYLPARABEN”

Search indexed PubMed citations on genomics, clinical trials, systematic reviews and public health. Explore titles, authors and supplied subject terms, then open the PubMed record.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2Linked to original sources
PubMed1992

Central effects of the preservative, methylparaben. In vivo activation of cAMP-specific phosphodiesterase and reduction of cortical cAMP.

The phenolic preservative, methylparaben (MPB), has in the past been demonstrated to harbour definite pharmacological effects. In an attempt to examine the possible central effects of MPB, notably on cyclic nucleotides and cyclic nucleotide phosphodiesterase (PDE; EC 3.1.4.17), rats were orally treated with the drug (0.4% in rat food) for 3 weeks with cortex extracts being used for the various determinations. Three isozymes were identified by DEAE-cellulose anion exchange chromatography, namely the calmodulin/calcium-stimulated form or PDE I (peak I), the cGMP-stimulated form or PDE II (peak II), and an independent form not affected by either calmodulin or cGMP also known as PDE IV (peak III). The presence of MPB induced a significant decrease in cortical cAMP, as well as strongly stimulating the activity of PDE IV (peak III). In addition, a small, yet significant, increase in cGMP levels was observed. Since no increase in cGMP hydrolysis was observed, we conclude that chronic ingestion of MPB induces a preference for cAMP hydrolysis, which was confirmed by the increase in PDE IV (peak III) activity. PDE IV is a membrane-bound, low Km PDE exhibiting high selectivity for cAMP hydrolysis. While there was an increase in cGMP, we failed to observe an increase in the activity of the cGMP-stimulated PDE (PDE II). These data are discussed with reference to the possible membrane effects of MPB allowing it to alter both the kinetic properties of PDE IV with the resultant effects on cAMP, as well as a means whereby it may activate guanyl cyclase and increase cGMP.

3',5'-Cyclic-AMP Phosphodiesterases↗
PubMed2005

A novel gradient HPLC method for simultaneous determination of ranitidine, methylparaben and propylparaben in oral liquid pharmaceutical formulation.

A selective and accurate high-performance liquid chromatographic method has been developed and validated for the simultaneous determination of ranitidine, methylparaben (MP) and propylparaben (PP) in oral liquids. Samples were purified by solid-phase extraction (SPE) using a copolymeric [poly(divinylbenzene-co-N-vinylpyrrolidone)] sorbent. The chromatographic separation was achieved by HPLC using a mixture of ammonium acetate solution (0.5 M), acetonitrile and methanol as the mobile phase with gradient elution, a Nucleosil C18 column and UV detection at 254 nm. The method was validated with respect to linearity, precision, accuracy, selectivity, and robustness. All the parameters examined met the current recommendations for bioanalytical method validation. The method was found to be applicable to routine analysis (assays and stability tests) of active compound (ranitidine) and preservatives (MP and PP).

Anti-Ulcer Agents↗
PubMed2005

Separation and determination of clotrimazole, methylparaben and propylparaben in pharmaceutical preparation by micellar electrokinetic chromatography.

In this study, micellar electrokinetic chromatography (MEKC) method was developed for the determination of clotrimazole (CLO), methylparaben (MP) and propylparaben (PP) in a pharmaceutical preparation. Separation was carried out in a fused silica capillary (60 cm x 75 microm i.d.) at 25 kV with UV detection at 212 nm. Optimized background electrolyte (BGE) was 15 mM phosphate buffer (pH 7.2) containing 30 mM sodium dodecyl sulfate (SDS) as a surfactant. Rectilinear calibration ranges were 50-500 mg l(-1) for CLO, 10-100 mg l(-1) for MP and 2.5-25 mg l(-1) for PP. The total analysis time was < 12 min.

Anti-Infective Agents, Local↗
PubMed2006

Stability indicating simultaneous determination of domperidone (DP), methylparaben (MP) and propylparaben by high performance liquid chromatography (HPLC).

A simple, specific and precise high performance liquid chromatographic method has been developed and validated for the simultaneous determination of methylparaben (MP), propylparaben (PP), and domperidone (DP) in oral suspension. Isocratic mobile phase consists of 0.5% w/v aqueous ammonium acetate buffer:methanol, 40:60 (v/v). Column containing octylsilyl chemically bonded to porous silica particles (Optimapak, OP C8, 150 mmx4.6 mm, 5 microm, stainless steel analytical column from RS tech) is used as stationary phase. The detection is carried out using variable wavelength UV-vis detector set at 280 nm. The solutions are chromatographed at constant flow rate of 1.0 mL/min. The method separates MP, PP, DP and droperidol (DR) impurity in less than 12 min with good resolution, peak shapes and minimal tailing. Retention times (RT) for MP, PP, DP and DR are about 3.4, 7.0, 9.0 and 10.9 min, respectively. Linearity range and percent recoveries for MP, PP and DP are 90-270, 10-30, 50-1500 microg/mL and 100.30%, 100.78% and 100.48%, respectively. Method was validated according to ICH guidelines and proved to be suitable for stability testing, homogeneity testing and quality control of these compounds in pharmaceutical preparations.

Chromatography, High Pressure Liquid↗
PubMed2006

Methylparaben potentiates UV-induced damage of skin keratinocytes.

For many years, methylparaben (MP) has been used as a preservative in cosmetics. In this study, we investigated the effects of ultraviolet-B (UVB) exposure on MP-treated human skin keratinocytes. HaCaT keratinocyte was cultured in MP-containing medium for 24h, exposed to UVB (15 or 30 mJ/cm(2)) and further cultured for another 24h. Subsequent cellular viability was quantified by MTT-based assay and cell death was qualified by fluorescent microscopy and flow cytometry. Oxidative stress, nitric oxide (NO) production and cellular lipid peroxidation were measured using fluorescent probes. In addition, activation of nuclear factor kappa B and activator protein-1 was assessed by electro-mobility gel-shift assay. Practical concentrations of MP (0.003%) had a little or no effect on cellular viability, oxidative stress, NO production, lipid peroxidation and activation of nuclear transcription factors in HaCaT keratinocytes. Low-dose UVB also had little or no effect on these parameters in HaCaT keratinocytes. However, UVB exposure significantly increased cell death, oxidative stress, NO production, lipid peroxidation and activation of transcription factors in MP-treated HaCaT keratinocytes. These results indicate that MP, which has been considered a safe preservative in cosmetics, may have harmful effects on human skin when exposed to sunlight.

Apoptosis↗
PubMed1998

Determination of methylparaben, propylparaben and chlorpromazine in chlorpromazine hydrochloride oral solution by high-performance liquid chromatography.

A reversed-phase high-performance liquid chromatographic assay method was developed and validated for the simultaneous determination of methylparaben and propylparaben preservatives and chlorpromazine hydrochloride active component in a liquid oral pharmaceutical formulation. The method separated the analytes as well as some degradants and other components, providing good resolution and moderate tailing. The performance of various C18 columns was compared. There were significant differences in selectivity and only a few phases showed acceptable tailing without the addition of triethylamine modifier in the mobile phase.

Chlorpromazine↗
PubMed2003

Simultaneous determination of methylparaben, propylparaben, hydrocortisone acetate and its degradation products in a topical cream by RP-HPLC.

A novel reversed-phase high-performance liquid chromatographic method with UV spectrophotometric detection was developed and validated for the determination of compounds in topical cream. The method describes determination of active component hydrocortisone acetate (HCA), its degradation products hydrocortisone (HC) and cortisone acetate (occurring in formulation after long-term stability tests) and two preservatives presented in the cream-methylparaben and propylparaben, using dexamethasone as an internal standard. The chromatographic separation was performed on a 5 microm SUPELCO Discovery C18 125 x 4-mm ID column. The optimised mobile phase for separation of all the compounds consists of methanol, acetonitrile and water (15:27:58, v/v/v), with the analysis time less than 13 min. The method was applicable for routine analysis (assays and stability tests) of active compound HCA, preservatives and degradation products in pharmaceutical product--topical cream Hydrocortizone cream 1%.

Administration, Topical↗
PubMed1999

Determination of indinavir, potassium sorbate, methylparaben, and propylparaben in aqueous pediatric suspensions.

A gradient, reversed phase, HPLC method was developed for simultaneous analysis of potassium sorbate, methylparaben, propylparaben, and indinavir in aqueous suspensions that contain a proprietary orange flavoring and Magnasweet sweetener enhancer (MacSanrews and Forbes Company, Magnasweet product brochure). The chromatographic separation is performed on an Eclipse XDB-C8 column using a gradient run with an analysis time of 35 min. The mobile phase consists of acetonitrile and acetonitrile:citrate buffer, pH 4.0 (20:80 v/v). The method successfully separates the three preservatives, indinavir (active ingredient), the orange flavoring, the Magnasweet species, and the indinavir lactone degradate. Recovery, linearity, and precision results for the three preservatives and indinavir are described. The method applies to two types of formulations: Xanthan Gum suspension and NanoSystems suspension.

Anti-HIV Agents↗
PubMed2000

Influence of relative humidity on the mechanical and drug release properties of theophylline pellets coated with an acrylic polymer containing methylparaben as a non-traditional plasticizer.

The purpose of this study was to investigate the influence of relative humidity (RH) on the mechanical and dissolution properties of theophylline pellets coated with Eudragit((R)) RS 30 D/RL 30 D containing methylparaben (MP) as a non-traditional plasticizer. The coated beads were stored at 23 degrees C and at different relative humidities (0, 29, 51, 75 and 84% RH). The effect of storage conditions on the rate of drug release from coated beads was determined in pH 7.4 phosphate buffer solution. The mechanical properties, including tensile strength and Young's modulus, of individual beads were determined by a diametral compression method with a Chatillon((R)) tension/compression apparatus. The morphology of the intact and fractured beads was investigated using scanning electron microscopy (SEM). The moisture content of the polymeric films was determined using a Karl Fischer coulometric moisture analyzer. The results from the mechanical studies demonstrated that an increase in the relative humidity resulted in a decrease in the tensile strength and Young's modulus of the coated beads. SEM photographs showed that coated beads stored at 0% RH exhibited brittle fracture failure. The coated beads stored at 84% RH showed ductile behavior, which was attributed to the hydroplasticization effect on the acrylic polymer due to the uptake of moisture. The moisture content in the films was also shown to influence the rate of drug release from Eudragit((R)) RS 30 D/RL 30 D coated beads containing MP as the plasticizer. The change in release profiles could be minimized when the relative humidity was reduced to zero. The dissolution rate of theophylline from the coated beads decreased when stored at high relative humidities. This trend was reversed when the coated beads that were stored at 84% RH for 5 weeks, were then equilibrated at 0% RH.

Humidity↗
PubMed1999

Simultaneous determination of metronidazole benzoate, methylparaben, and propylparaben by high-performance liquid chromatography.

The simultaneous determination of metronidazole benzoate (MB), methylparaben (MP), and propylparaben (PP) in an oral suspension formulation was developed using high-performance liquid chromatography (HPLC). The method was developed using a Novapak C18 (3.9 x 150 mm, 4 microns) column, methanol-water (50:50, v/v) as the mobile phase and an ultraviolet (UV) detector at 254 nm. The peak area response versus concentration was linear in a concentration range from 40 to 400 micrograms/ml of MB, 0.8 to 8.0 micrograms/ml of MP, and 0.2 to 2.0 micrograms of PP. The correlation coefficients were 0.9997 for MB, 0.9987 for MP, and 0.9983 for PP, with relative standard errors of 1.12%, 1.28%, and 1.67%, respectively.

Anti-Infective Agents↗
PubMed1981

Determination and temperature effects of lidocaine (lignocaine) hydrochloride, epinephrine, methylparaben, 2,6-dimethylaniline, and p-hydroxybenzoic acid in USP lidocaine injection by ion-pair reversed-phase high pressure liquid chromatography.

USP Lidocaine injection was assayed using ion-pair high pressure liquid chromatography with an octylsilane (RP-8) reversed-phase column packing and a mobile phase consisting of D-10-camphorsulfonic acid/methanol/acetic acid/water. The effect of temperature was investigated to determine the optimum temperature for separating the drug components and their degradation products. Lidocaine (lignocaine) hydrochloride, epinephrine, methylparaben, and p-hydroxybenzoic acid were separated at 50 degrees C. 2,6-Dimethylaniline was separated from lidocaine at 15 degrees C. An aliquot of the sample was injected directly into the liquid chromatograph, and after separation the compounds were quantitated by their spectrophotometric response at 254 nm (lidocaine) or 280 nm (lidocaine plus epinephrine).

Aniline Compounds↗
PubMedDate not supplied

Determination of methylparaben in o/w emulsions by solid-phase extraction and high-performance liquid chromatography.

A simple, fast, and accurate solid-phase extraction (SPE) using a 1-cc Oasis HLB cartridge for sample clean-up followed by an HPLC analysis for the assay of methylparaben (MP) in an o/w emulsion is described. One milliliter of methanol followed by 1 ml of 10% methanol in water was used to activate the cartridge sorbent. The sample was loaded into the cartridge and MP was then separated from oil-soluble excipients by washing the cartridge with 1 ml of 10% CH(3)CN in water. MP was finally eluted from the cartridge with mobile phase, acetonitrile and water (60:40), and quantified by HPLC analysis on a Nova-pak(R) C-18 column at 254 nm.

Chromatography, High Pressure Liquid↗
PubMed2005

Simultaneous determination of preservatives (benzoic acid, sorbic acid, methylparaben and propylparaben) in foodstuffs using high-performance liquid chromatography.

A reversed-phased HPLC method that allows the separation and simultaneous determination of the preservatives benzoic (BA) and sorbic acids (SA), methyl- (MP) and propylparabens (PP) is described. The separations were effected by using an initial mobile phase of methanol-acetate buffer (pH 4.4) (35:65) to elute BA, SA and MP and changing the mobile phase composition to methanol-acetate buffer (pH 4.4) (50:50) thereafter. The detector wavelength was set at 254 nm. Under these conditions, separation of the four components was achieved in less than 23 min. Analytical characteristics of the separation such as limit of detection, limit of quantification, linear range and reproducibility were evaluated. The developed method was applied to the determination of 67 foodstuffs (mainly imported), comprising soft drinks, jams, sauces, canned fruits/vegetables, dried vegetables/fruits and others. The range of preservatives found were from not detected (nd)--1260, nd--1390, nd--44.8 and nd--221 mg kg(-1) for BA, SA, MP and PP, respectively.

Benzoic Acid↗