Search PubMed⌕ Search

SEARCH · Search PubMed

Results for “METALS”

Search indexed PubMed citations on genomics, clinical trials, systematic reviews and public health. Explore titles, authors and supplied subject terms, then open the PubMed record.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2Linked to original sources

Metal dynamics of plant litter of Spartina alterniflora and Phragmites australis in metal-contaminated salt marshes. Part 1: Patterns of decomposition and metal uptake.

To investigate the decay rate and metal uptake in litter from two species of wetland plants, leaves and stems of senescent Spartina alterniflora and Phragmites australis (P) were obtained from the Hackensack Meadowlands (NJ, USA) in October 1998, and their initial metal contents were determined. Two types of S. alterniflora were obtained, one set from a natural site (NS) and one from a restored site (RS). Leaves and stems were placed in separate litterbags, and samples of each type were reciprocally transplanted into each of the three collection sites (NS, RS, and P) as well as in the laboratory, where they were alternately dried and wetted. Litterbags were retrieved from the field at four six-month intervals and after one year from the laboratory. Annual decay coefficients were greater for leaves than for stems. Stems of P. australis initially decomposed more slowly (37-63% remaining) than those of S. alterniflora (23-53 % remaining), but after two years, decay was comparable (8-40% remaining for both species). Decomposition was slower at the RS site than at the other field sites, and it was slowest in the laboratory. Metal concentrations initially were lower in stems than in leaves, and Cr, Pb, and Zn were lower in P. australis than in S. alterniflora. In the field, large increases (10- to 100-fold) in metal concentrations rapidly obliterated any initial differences between plant species. Metal concentrations in leaves rose more quickly and remained greater than in stems. For example, Cu approached 300 microg/g in leaves but was less than 200 microg/g in stems. In contrast to the modest rise in metal concentrations in the leaf tissue at the more contaminated RS site (Zn rose to approximately 200 microg/g in sediments containing approximately 400 microg/g), Cu and Zn concentrations in leaf litter at the P and NS sites increased to levels exceeding those in the surrounding sediment (Zn rose to approximately 500 microg/g in sediments containing approximately 200 microg/g). Temporal changes in metal pools (grams of metal per litterbag) were not discernable because of the negative correlation of mass remaining and metal concentrations as well as because of the great variability of metal concentrations within each treatment. Decomposition and the accumulation of metals may be influenced more by differences between tissue types than by species or sediment metal concentrations.

Chromium↗

Differences in the fretting corrosion of metal-metal and ceramic-metal modular junctions of total hip replacements.

The use of modular interlocking components is a central design feature of total joint replacements. In this investigation we hypothesized that clinically available ceramic-metal modular connections used in total hip arthroplasty release more metal through fretting corrosion than traditional metal-metal modular connections. This was investigated using an in vitro comparison of ceramic (zirconia, ZrO2) and metal (Co-alloy) femoral-head fretting upon Co-alloy stem components. In vitro fretting corrosion testing consisted of potentiodynamic monitoring and analysis of metal release from zirconia and Co-alloy 28 mm femoral heads with similar surface roughnesses (Ra=0.46 microm) on identical Co-alloy stems at 2.2 kN for 1x10(6) cycles at 2 Hz. In contrast to our original hypothesis, we found greater metal release (approximately 11-fold increase in Co and 3-fold increase in Cr) and potentiodynamic fretting of metal-metal modular junctions when compared to ceramic-metal. Potentiodynamic testing demonstrated that lower initial voltages (-266<153 mV), greater maximum voltage changes (116>56 mV, p<0.05, t-test) and voltage variability (3>0.5 mV, p<0.05, t-test) were associated with the open circuit potentials of Co-alloy on Co-alloy junctions when compared to zirconia on Co-alloy junctions. In this study of a single total hip replacement stem and head design, zirconia heads mated with Co-alloy stems produced less fretting than Co-alloy heads mated with Co-alloy stems. Although further studies are necessary with a variety of implant designs and under different experimental conditions, the evidence presented here should, in part, alleviate concerns of increases in fretting corrosion at modular junctions of ceramic-metal coupled components.

Adult↗

Metal degradation products: a cause for concern in metal-metal bearings?

In the majority of patients, orthopaedic implants are biocompatible. However, there is an increasing recognition that, in the long-term, permanent orthopaedic implants may be associated with adverse local and remote tissue responses in some individuals. These adverse effects are mediated by the degradation products of implant materials. The recent reintroduction of metal-on-metal bearings for total hip arthroplasty has heightened concerns about the biologic response to metal degradation products in light of the fact that the serum and urine metal concentrations in patients with these implants typically are higher than those seen in patients with conventional metal-on-polyethylene bearings. From previous studies of long-term metal-on-metal McKee-Farrar implants, it seems that these elevated levels may persist for the duration of the implant's lifetime. This is of particular concern in the younger and more active patient in whom life expectancy after implantation may exceed 30 years. The association of metal release from orthopaedic implants with any metabolic, bacteriologic, immunologic, or carcinogenic toxicity currently remains conjectural because cause and effect have not been established in human subjects. However, continued surveillance of patient populations with metal implants, particularly those with metal-metal bearings, is warranted.

Foreign Bodies↗

[The shear bond strength of porcelain and base metal alloys for metal-ceramic crown the study of metal roughness and microstructure].

The metal-ceramic crown has become a predominant restoration in fixed prosthodontics. The base metal has the quality of lower price, high tensile strength, high elastic modulus. The base metal alloy that contain beryllium element increases fluidity and improved casting performance. Beryllium also controls surface oxidation and affects the metal ceramic bonds. Preparation of surface prior to porcelain bonding has been a subject of controversy among dental ceramists. Two ceramic base metal alloys (one alloy contains beryllium, another is not) were studied. This investigation evaluated the polishing effects of 50 microns, 100 microns aluminum oxide sandblasting, carbide bur, carborundum point and separating disk upon two base metal alloys, Rexillium III and Wiron 88. A scanning electron microscope was used to study the surface texture. The following results were obtained: 1. The most roughest surface was created with 50 microns aluminum oxide sandblasting. The carbide bur produced the least roughed surface. 2. There are specific surface texture patterns after polishing with five different grinding materials. 3. The metal surfaces treated with 50 microns and 100 microns aluminum oxide have same micro-structure pictures, but there are much more undercuts treated with 100 microns aluminum oxide. 4. The usage of carbide bur resulted in less undercuts of metal surface at two metal alloys. 5. The usage of carborundum point and disk resulted in abrasive particles that retained on the grinding metal surface at two metal alloys. 6. The surface of Wiron 88 alloy usually had wrinkle texture but not the Rexillium III alloy.

Crowns↗

New conversion method of metal surfaces for resin bonding. Conversion effects for pure metals in dental precious metal alloys.

Excellent adhesion of adhesives to metals can be realized by simply applying liquid Ga-Sn alloy (Adlloy) on the adherend metal surface. This method is only effective on dental precious metal alloys. Five metals, Au, Pt, Pd, Ag, and Cu, included in dental precious metal alloys were converted by this method to determine the most effective pure metal from bonding strength measurements, water durability at the adhesion interface, and ESCA measurements. All metals converted by Adlloy showed excellent bonding strength and water durability, whereas nonconverted metals showed poor water durability. ESCA measurements showed that metal surfaces converted by Adlloy are covered with a 3-6 nm thick Ga and Sn oxide film and that the diffusibilities of Ga in the metals are in the order Ag greater than Au greater than Pt greater than Cu greater than Pd. From the viewpoint of handling, Ag is the most effective metal.

Acrylic Resins↗

Metal wear particle characterization from metal on metal total hip replacements: transmission electron microscopy study of periprosthetic tissues and isolated particles.

The less intense tissue reaction around metal on metal total hip replacements (THRs) compared to metal on polyethylene (PE) THRs may be explained by the differences in the characteristics of metal wear particles. In this study, transmission electron microscopy was used to study metal wear particles that were either in situ in cells or had been extracted from the cells by a new technique based on enzymatic tissue digestion. The tissues were obtained from 13 patients undergoing revision of metal on metal THRs with cobalt-chromium-molybdenum (CoCrMo) bearing couples. Most of the CoCrMo wear particles were smaller than 50 nm (range 6-834 nm) and round to oval in shape with irregular boundaries. This size range is considerably smaller than that reported for PE particles. While even a small volume of metal wear will produce high numbers of particles, the apparently less severe local tissue reaction to metal particles may be due to the possibility that corrosion, dissolution, and dissemination of metal particles may result in fewer local biological effects than the long-term retention of PE particles in the periprosthetic tissues.

Adult↗

[Various factors influencing toxicity and metabolism of metals--metal-metal interactions and host factors (author's transl)].

This paper is a brief overview on metal-metal interactions and various other factors involved in the toxicity and metabolism of metals, including host factors, nutrition, habits, etc. Humans and other organisms are exposed to various metals in many ways, and even in an occupation in which workers are exposed to a metal such as lead, they are at the same time also exposed to other metals, although concentrations of these latter metals are usually not very high. This can result in effects different from those produced by a single metal by itself. Furthermore, individual differences which are caused by genetic, nutritional, hormonal, habitual, and many other factors may alter the toxic or metabolic effects of a single metal. Information on this subject is rather limited. This paper is a brief introduction to the importance of future studies on the topic, and the author hopes that it will stimulate more studies by those who are interested in the field of metal toxicology.

Animals↗

Metal-metal interactions among dietary toxic and essential trace metals in the rat.

Exposure to toxic and essential metals is thought to be reflected by corresponding metal concentrations in tissues. However, toxic and essential metals may influence each other in regard to their retention in the body. Therefore a basic diet containing four toxic metals (As 7, Cd 9, Ni 13, and Pb 20 ppm) and adequate amounts of essential metals was fed to rats for 2 weeks. Test groups received the basic diet with increasing concentrations of one of the toxic metals (up to 90 ppm As, 180 ppm Cd, 365 ppm Ni, and 394 ppm Pb). As, Cd, Ni, Pb, Cu, Fe, Mn, and Zn were determined by atomic emission spectroscopy in liver, kidney, intestine, brain, muscle, bone, skin, hair, and blood. A linear relationship between diet and tissue concentration is observed for As and Ni in the kidney, for Cd in the liver, and for Pb in the bone. In other tissues saturation was observed. While Cd-Fe interactions were common to most of the tissues, other interactions were detected only in specific tissues, e.g., As-Cu in the kidney, Cd-Zn in the liver, and As-Mn, Cd-Mn, or Ni-Cu in the intestine. Increases of renal Pb and intestinal Cd by dietary Ni, and a decrease in bone As by dietary Pb were the most pronounced interactions between the toxic metals. The results demonstrate that potential target organs for the evaluation of metal exposure need to be carefully analyzed for interfering metal-metal interactions.

Administration, Oral↗

A consensus paper on metal ions in metal-on-metal hip arthroplasties.

The number of metal-on-metal bearings used clinically continues to increase, particularly in young, active patients. The single greatest concern with the use of a metal-on-metal bearing continues to be the elevated levels of metal ions measurable in patients' blood and urine following implantation. There are multiple complex issues associated with the analysis of metal ions, including collection techniques, analysis, statistical methodologies, and reporting of results. To date, the literature on this topic has been characterized by significant variability in all of these factors. This paper seeks to establish a consensus among 3 investigators who have been working in this area and to offer guidelines on the complex methodology involved in the evaluation of metal concentration in patients following metal-on-metal hip arthroplasties.

Hip Prosthesis↗

Can metal levels be used to monitor metal-on-metal hip arthroplasties?

In this review, the prospects for using blood, serum, and/or urine metal levels for monitoring the performance of metal-on-metal hip arthroplasty systems are explored. This approach does have substantial potential for serving this function; however, the methodology is technically challenging and the interpretation of the values requires an extensive database with correlative clinical information. At this time, it is premature to recommend metal concentration analysis on a routine clinical basis for patients with metal-on-metal total hip arthroplasties. Nonetheless, metal concentration analysis remains a powerful research tool in the evaluation of metal-on-metal hip arthroplasty systems.

Arthroplasty, Replacement, Hip↗

Effects of metal-inlay thickness in polyethylene cups with metal-on-metal bearings.

A way to prevent polyethylene wear in total hip replacements is to use metal-on-metal bearings. The cup design of these bearings may be a metal inlay in a polyethylene cup. However, these metal inlays are relatively thin and may deform on loading. The purpose of the current study was to determine whether these potential problems become actual for a realistic range of metal-inlay components having a thickness greater than 1 mm. For this purpose, the effects of thickness variation of a metal inlay in an ultrahigh molecular weight polyethylene cup were determined using three-dimensional finite element techniques. The results showed no indications for jamming of the bearing assuming a realistic inlay thickness (3-5 mm), even with a small clearance (25 microm). The metal inlay acted rigidly beyond a thickness of approximately 5 mm. Metal inlays thinner than 1.5 mm led to a considerable increase in contact area and a reduction in contact peak stress, which may be beneficial for the bearing performance. Currently, these thin liners have too many unknown characteristics and therefore the current authors recommend using rigid metal liners that have a thickness greater than 5 mm.

Biomechanical Phenomena↗

Serum and urine metal levels in patients with metal-on-metal surface arthroplasty.

The resurgence of metal-on-metal articulating surfaces for hip arthroplasty has also heightened concerns about the degree and magnitude of metal particle generation and the accompanying increase in circulating metal ion concentrations. In this study, we measured the concentration of chromium in serum and urine and the concentration of cobalt in serum in twenty-five patients with modern metal-on-metal surface arthroplasty of the hip in a prospective manner. The results showed that the mean post-operative chromium in serum levels were 22-fold, 23-fold and 21-fold higher at 3, 6 and 12 months post-operative, respectively, than pre-operative levels. The mean post-operative cobalt in serum levels were 8-fold, 7-fold and 6-fold higher at 3, 6 and 12 months post-operative, respectively, than pre-operative levels. The mean post-operative chromium in urine levels were 9-fold, 10-fold and 14-fold higher at 3, 6 and 12 months post-operative, respectively, than pre-operative levels. The values seen in this study with the current generation of surface arthroplasties are: (a) lower than those seen in an earlier generation of surface arthroplasties; (b) in the same range as those observed in association with metal-on-metal conventional total hip replacements, which typically have smaller head sizes; (c) higher than values observed in patients with conventional metal-on-polyethylene articulating couples.

Journal Article↗

Temporomandibular Joint Arthroplasty Using Metal-on-Metal and Acrylic-on-Metal Configurations : Wear In Laboratory Tests and In Retrievals.

In the long-term performance ofthe temporomaridibular joint (TMJ) implant, wear must be considered. Thus retrieved and laboratory test implants were examined both optically and in a scanning electron microscope (SEM). In laboratory testing, the volumetric wear of metal-on-metal was about an order of magnitude less than that of acrylic-on-metal TMJ implants. This metal-on-metal wear was also about half of that reported in the literature for a laboratory test of polyethylene-on-metal TMJ implants, The retrieved TMJ implants showed some abrasive wear occurred during multi-directional articulation with smaller wear zones for the metal-on-metal compared to the acrylic-on-metal configuration. Further efforts to characterize and minimize wear were recommended as prudent in the continuing development of TMJ arthroplasty.

Journal Article↗

Can a safe level for metal ions in patients with metal-on-metal total hip arthroplasties be determined?

The single most significant obstacle preventing a broader application of metal-on-metal hip arthroplasties continues to be the concerns regarding elevated metal ion levels in the blood and urine of patients with this bearing. A safe level for metal ions has yet to be defined for patients with metal-on-metal hip arthroplasties. A review of occupational exposure data gives some insight; however, longitudinal studies of large numbers of patients with metal-on-metal implants will ultimately be required to answer specific clinical concerns.

Arthroplasty, Replacement, Hip↗

The role of metal on imide hydrolysis: metal content and pH profiles of metal ion-replaced mammalian imidase.

Imidase catalyzes the hydrolysis of a variety of imides. The removal of metal from imidase eliminates its activity but does not affect its tetrameric and secondary structure. The reactivation of the apoenzyme with transition metal ions Co(2+), Zn(2+), Mn(2+), and Cd(2+) shows that imidase activity is linearly dependent on the amount of metal ions added. Ni(2+) and Cu(2+) are also inserted, one per enzyme subunit, into the apoimidase, but do not restore imidase activity. Enzyme activity with different metal replaced imidase varies significantly. However, the changes of the metal contents do not appear to affect the pK(a)s obtained from the bell-shaped pH profiles of metal reconstituted imidase. The metal-hydroxide mechanism for imidase action is not supported based on the novel findings from this study. It is proposed that metal ion in mammalian imidase functions as a Lewis acid, which stabilizes the developing negative charge of imide substrate in transition state.

Amidohydrolases↗

Heterodinuclear transition-metal complexes with multiple metal-metal bonds.

Interactions between a pair of transition-metals can range from weak antiferromagnetic coupling to bonds of the highest multiplicity known in chemistry, for example, quadruple in isolatable compounds. Tremendous effort has been invested in studying homodinuclear transition-metal-metal bonds. In contrast, relatively little attention has been devoted to heterodinuclear analogues, as it is substantially more challenging to prepare and handle such entities. Yet, in this largely unexplored area of transition-metal chemistry, novel chemical interactions with unprecedented reactivities are likely to be found. Heterodinuclear analogues of diatomic transition-metal dimers being yet inaccessible, dinuclear complexes with Werner-type ligands provide examples of high-multiplicity bonds between different d elements in their least-perturbed form. Such compounds provide an opportunity to probe fundamental issues of chemical bonding between transition-metals, by revealing how and to what extent such bonds are affected by differences in the two metals. Complexes wherein electronically unsaturated heterodinuclear cores are stabilized by pi-acidic ligands (such as CO) hold the potential of new chemical reactions (including catalytic) that capitalize on the synergetic effect of two transition-metal centers.

Journal Article↗

Heavy metal-binding proteins from metal-stimulated bacteria as a novel adsorbent for metal removal technology.

Water pollution with toxic heavy metals is of growing concern because heavy metals could bring about serious problems for not only ecosystems in the water environment but also human health. Some metal removal technologies have been in practical use, but much energy and troublesome treatments for chemical wastes are required to operate these conventional technologies. In this study, heavy metal-binding proteins (HMBPs) were obtained from metal-stimulated activated sludge culture with affinity chromatography using copper ion as a ligand. Two-dimensional electrophoresis revealed that a number of proteins in activated sludge culture were recovered as HMBPs for copper ion. N-termini of five HMBPs were determined, and two of them were found to be newly discovered proteins for which no amino acid sequences in protein databases were retrieved at more than 80% identities. Metal-coordinating amino acids occupied 38% of residues in one of the N-terminal sequences of the newly discovered HMBPs. Since these HMBPs were expected to be stable under conditions of water and wastewater treatments, it would be possible to utilize HMBPs as novel adsorbents for heavy metal removal if mass volume of HMBPs can be obtained with protein cloning techniques.

Adsorption↗

Synthetic metal-binding protein surface domains for metal ion-dependent interaction chromatography. I. Analysis of bound metal ions by matrix-assisted UV laser desorption time-of-flight mass spectrometry.

To extend the analytical capabilities of immobilized metal ion affinity chromatography (IMAC) for evaluation of biologically relevant peptide-metal ion interactions, we have prepared synthetic peptides representing metal-binding protein surface domains from the human plasma metal transport protein known as histidine-rich glycoprotein (HRG). Three synthetic peptides, representing multiples of a 5-residue repeat sequence (Gly-His-His-Pro-His) from within the histidine- and proline-rich region of the C-terminal domain were prepared. Prior to immobilization, the synthetic peptides were evaluated for identity and sample homogeneity by matrix-assisted UV laser desorption time-of-flight mass spectrometry (LDTOF-MS), a method developed recently for the mass determination of high-molecular-mass biopolymers. 2,5-Dihydroxybenzoic acid was evaluated as a matrix to facilitate the laser desorption and ionization of intact peptides and was found to be ideally suited for determinations of mass within the low-mass region of interest (641.7 to 1772.8 dalton). We observed minimal chemical noise from photochemically generated peptide-matrix adduct signals, clustering, and multiply-charged peptide species. Peptides with bound sodium and potassium ions were observed; however, these signal intensities were reduced by immersion of the sample probe tip in water. Mixtures of the three different synthetic peptides were also evaluated by LDTOF-MS after their elution through a special immobilized peptide-metal ion column designed to investigate metal ion transfer. We found LDTOF-MS to be a useful new method to verify the presence of peptide-bound metal ions.(ABSTRACT TRUNCATED AT 250 WORDS)

Amino Acid Sequence↗