Search PubMed⌕ Search

SEARCH · Search PubMed

Results for “Disulfides”

Search indexed PubMed citations on genomics, clinical trials, systematic reviews and public health. Explore titles, authors and supplied subject terms, then open the PubMed record.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2Linked to original sources
PubMed1998

Kinetic folding pathway of a three-disulfide mutant of bovine pancreatic ribonuclease A missing the [40-95] disulfide bond.

The oxidative refolding pathway of a three-disulfide mutant of bovine pancreatic ribonuclease A (RNase A) from the fully reduced unfolded form to the native state has been studied by using oxidized and reduced dithiothreitol as the redox reagents at pH 8.0 and 25 degrees C. This mutant was prepared by replacing Cys40 and Cys95 in RNase A with alanines while maintaining the other three native disulfide bonds to mimic one of the two major three-disulfide intermediates (des-[40-95]) observed in the regeneration of wild-type RNase A. The kinetics of refolding of this mutant were measured by quenching the regeneration reaction at various times with a rapid blocking reagent, 2-aminoethyl methanethiosulfonate (AEMTS), fractionating the disulfide intermediates by using cation-exchange HPLC, and analyzing the time course of each group of disulfide species. It was found that the disulfide intermediates formed during regeneration reach a steady-state distribution after a short period of preequilibration similar to that in the regeneration of wild-type RNase A. The experimental data acquired under different redox conditions were fit to a kinetic model with a steady-state treatment. The fitted results indicate that this mutant refolds through a rate-determining step which involves the oxidation of certain two-disulfide species to form a putative three-disulfide species which proceeds rapidly to the native protein. A rough estimation suggests that this pathway could constitute no more than 5% of the major pathway leading to the formation of des-[40-95] (the major three-disulfide intermediate formed) in the regeneration of wild-type RNase A. Several kinetic constants pertaining to the oxidation and reduction of various disulfide intermediates were compared with those obtained in the regeneration studies of wild-type RNase A to gain further understanding about the folding pathways of RNase A. Comparisons are also given for the oxidative refolding studies of several other three disulfide bond proteins, suggesting that the formation of a large number of disulfide-bonded intermediates during oxidative refolding is probably a common feature for most proteins.

Animals↗
PubMed1999

Distribution of disulfide bonds in the two-disulfide intermediates in the regeneration of bovine pancreatic ribonuclease A: further insights into the folding process.

The distribution of one-disulfide bonds in the two-disulfide intermediates in the oxidative refolding of bovine pancreatic ribonuclease A has been characterized. These two-disulfide intermediates were formed from the fully reduced denatured protein by oxidation with dithiothreitol, then blocked with AEMTS, purified by cation-exchange chromatography, enzymatically digested, and analyzed by reversed-phase high-performance liquid chromatography and mass spectrometry. The relative concentration of each of the 28 possible one-disulfide bonds in the two-disulfide ensemble was determined. Comparison with a statistical mechanical treatment of loop formation shows that the two-disulfide intermediates are probably compact. All 28 disulfide bonds were observed, demonstrating the absence of specific long-range interactions in these intermediates. Thermodynamic arguments suggest that the absence of such specific long-range interactions in the two-disulfide species may elevate the concentration of kinetically important three-disulfide intermediates and thereby increase the folding rate. Bond [65-72] was found to make up approximately 27% of the disulfide bonds of the two-disulfide species, significantly more than all other disulfides, because of stabilization by loop entropy factors and an energetically favorable beta-turn. This turn may be one of several chain-folding initiation sites, accelerating folding by decreasing the dimensionality of the conformational space that has to be searched.

Animals↗
PubMed2006

High torsional energy disulfides: relationship between cross-strand disulfides and right-handed staples.

Redox-active disulfides are capable of being oxidized and reduced under physiological conditions. The enzymatic role of redox-active disulfides in thiol-disulfide reductases is well-known, but redox-active disulfides are also present in non-enzymatic protein structures where they may act as switches of protein function. Here, we examine disulfides linking adjacent beta-strands (cross-strand disulfides), which have been reported to be redox-active. Our previous work has established that these cross-strand disulfides have high torsional energies, a quantity likely to be related to the ease with which the disulfide is reduced. We examine the relationship between conformations of disulfides and their location in protein secondary structures. By identifying the overlap between cross-strand disulfides and various conformations, we wish to address whether the high torsional energy of a cross-strand disulfide is sufficient to confer redox activity or whether other factors, such as the presence of the cross-strand disulfide in a strained beta-sheet, are required.

Computational Biology↗
PubMed2005

The nonconsecutive disulfide bond of Escherichia coli phytase (AppA) renders it dependent on the protein-disulfide isomerase, DsbC.

The formation of protein disulfide bonds in the Escherichia coli periplasm by the enzyme DsbA is an inaccurate process. Many eukaryotic proteins with nonconsecutive disulfide bonds expressed in E. coli require an additional protein for proper folding, the disulfide bond isomerase DsbC. Here we report studies on a native E. coli periplasmic acid phosphatase, phytase (AppA), which contains three consecutive and one nonconsecutive disulfide bonds. We show that AppA requires DsbC for its folding. However, the activity of an AppA mutant lacking its nonconsecutive disulfide bond is DsbC-independent. An AppA homolog, Agp, a periplasmic acid phosphatase with similar structure, lacks the nonconsecutive disulfide bond but has the three consecutive disulfide bonds found in AppA. The consecutively disulfide-bonded Agp is not dependent on DsbC but is rendered dependent by engineering into it the conserved nonconsecutive disulfide bond of AppA. Taken together, these results provide support for the proposal that proteins with nonconsecutive disulfide bonds require DsbC for full activity and that disulfide bonds are formed predominantly during translocation across the cytoplasmic membrane.

6-Phytase↗
PubMed1999

Secondary structure extensions in Pyrococcus furiosus ferredoxin destabilize the disulfide bond relative to that in other hyperthermostable ferredoxins. Global consequences for the disulfide orientational heterogeneity.

The single cubane cluster ferredoxin (Fd) from the hyperthermophilic archaeon Pyrococcus furiosus (Pf) possesses several unique properties when compared even to Fds from other hyperthermophilic archaea or bacteria. These include an equilibrium molecular heterogeneity, a six- to seven-residue increase in size, an Asp rather than the Cys as one cluster ligand, and a readily reducible disulfide bond. NMR assignments and determination of both secondary structure and tertiary contacts remote from the paramagnetic oxidized cluster of Pf 3Fe Fd with an intact disulfide bond reported previously (Teng Q., Zhou, Z. H., Smith, E. T., Busse, S. C., Howard, J. B. Adams, M. W. W., and La Mar, G. (1994) Biochemistry 33, 6316-6328) are extended here to the 4Fe oxidized cluster WT (1H and 15N) and D14C (1H only) Fds with an intact disulfide bond and to the 4Fe oxidized WT Fd (1H and 15N) with a cleaved disulfide bond. All forms are shown to possess a long (13-member) alpha-helix, two beta-sheets (one double-, one triple-stranded), and three turns outside the cluster vicinity, each with tertiary contacts among themselves as found in other Fds. While the same secondary structural elements, with similar tertiary contacts, are found in other hyperthermostable Fds, Pf Fd has two elements, the long helix and the triple-stranded beta-sheet, that exhibit extensions and form multiple tertiary contacts. All Pf Fd forms with an intact disulfide bond exhibit a dynamic equilibrium heterogeneity which is shown to modulate a hydrogen-bonding network in the hydrophobic core that radiates from the Cys21-Cys48 disulfide bond and encompasses residues Lys36, Val24, Cys21, and Cys17 and the majority of the long helix. The heterogeneity is attributed to population of the alternate S and R chiralities of the disulfide bond, each destabilized by steric interactions with the extended alpha-helix. Comparison of the chemical shifts and their temperature gradients reveals that the molecular structure of the protein with the less stable R disulfide resembles that of the Fd with a cleaved disulfide bond. Both cluster architecture (3Fe vs 4Fe) and ligand mutation (Cys for Asp14) leave the disulfide orientational heterogeneity largely unperturbed. It is concluded that the six- to seven-residue extension that results in a longer helix and larger beta-sheet in Pf Fd, relative to other hyperthermostable Fds, more likely serves to destabilize the disulfide bond, and hence make it more readily reducible, than to significantly increase protein thermostability.

Amino Acid Sequence↗
PubMed1989

Catalysis of thiol/disulfide exchange: single-turnover reduction of protein disulfide-isomerase by glutathione and catalysis of peptide disulfide reduction.

Protein disulfide-isomerase, a protein localized to the lumen of the endoplasmic reticulum of eukaryotic cells, catalyzes the posttranslational formation and rearrangement of protein disulfide bonds. As isolated from bovine liver, the enzyme contains 0.8 free sulfhydryl group per mole of protein monomer and 3.1 disulfide bonds. Single-turnover experiments in which the disulfide bonds of the native enzyme are reduced by glutathione reveal three distinct reduction steps corresponding to the sequential reduction of the three disulfide bonds. The fastest disulfide to be reduced undergoes a change in the rate-determining step with increasing GSH concentration from a step which is second-order with respect to GSH concentration to a step which is first-order in GSH concentration. The disulfide which is reduced at an intermediate rate displays kinetics that are first-order in GSH concentration, and the slowest disulfide to be reduced exhibits kinetics which are second-order in GSH concentration. The enzyme catalyzes the steady-state reduction of a disulfide-containing hexapeptide (CYIQNC) by GSH. Initial velocity kinetic experiments are consistent with a sequential addition of the substrates to the enzyme. Saturation behavior is not observed at high levels of both substrates (Km for GSH much greater than 14 mM, Km for CYIQNC much greater than 1 mM). Only one of the three disulfides appears to be kinetically competent in the steady-state reduction of CYIQNC by GSH. The second-order thiol/disulfide exchange reactions catalyzed by the enzyme are 400-6000-fold faster than the corresponding uncatalyzed reactions.

Catalysis↗
PubMed2004

Hierarchical formation of disulfide bonds in the immunoglobulin Fc fragment is assisted by protein-disulfide isomerase.

Antibodies provide an excellent system to study the folding and assembly of all beta-sheet proteins and to elucidate the hierarchy of intra/inter chain disulfide bonds formation during the folding process of multimeric and multidomain proteins. Here, the folding process of the Fc fragment of the heavy chain of the antibody MAK33 was investigated. The Fc fragment consists of the C(H)3 and C(H)2 domains of the immunoglobulin heavy chain, both containing a single S-S bond. The folding process was investigated both in the absence and presence of the folding catalyst protein-disulfide isomerase (PDI), monitoring the evolution of intermediates by electrospray mass spectrometry. Moreover, the disulfide bonds present at different times in the folding mixture were identified by mass mapping to determine the hierarchy of disulfide bond formation. The analysis of the uncatalyzed folding showed that the species containing one intramolecular disulfide predominated throughout the entire process, whereas the fully oxidized Fc fragment never accumulated in significant amounts. This result suggests the presence of a kinetic trap during the Fc folding, preventing the one-disulfide-containing species (1S2H) to reach the fully oxidized protein (2S). The assignment of disulfide bonds revealed that 1S2H is a homogeneous species characterized by the presence of a single disulfide bond (Cys-130-Cys-188) belonging to the C(H)3 domain. When the folding experiments were carried out in the presence of PDI, the completely oxidized species accumulated and predominated at later stages of the process. This species contained the two native S-S bonds of the Fc protein. Our results indicate that the two domains of the Fc fragment fold independently, with a precise hierarchy of disulfide formation in which the disulfide bond, especially, of the C(H)2 domain requires catalysis by PDI.

Animals↗
PubMed1998

Regeneration of three-disulfide mutants of bovine pancreatic ribonuclease A missing the 65-72 disulfide bond: characterization of a minor folding pathway of ribonuclease A and kinetic roles of Cys65 and Cys72.

The oxidative regeneration pathways of two three-disulfide mutants of bovine pancreatic ribonuclease A (RNase A) missing the 65-72 disulfide bond, [C65S,C72S] and [C65A,C72A], have been studied by using oxidized dithiothreitol (DTTox) as an oxidizing agent and 2-aminoethylmethanethiosulfonate (AEMTS) as a thiol-blocking agent at 25 degrees C and pH 8.0. These mutants are analogues of the des-[65-72] intermediate, which is one of the two major three-disulfide intermediates that follow after the transition states in the regeneration pathways of wild-type RNase A [Rothwarf, D. M., Li, Y.-J., and Scheraga, H. A. (1998) Biochemistry 37, 3760-3766, 3767-3776.]. Both mutants folded through the same pathway but at a rate lower than that of the wild-type protein. The major rate-determining step in the regeneration of these mutants was determined to be the oxidation from the two-disulfide intermediates (2S) to the post-transition-state three-disulfide intermediate (3S*), suggesting the existence of a minor oxidation pathway (2S --> 3S*, where 3S* is des-[65-72]) in the regeneration of the wild-type protein, in addition to one of the two major disulfide-rearrangement pathways (3S --> des-[65-72]). The regeneration intermediates of these mutants (R, 1S, 2S, and 3S) participate in a steady state with a kinetic behavior resembling that of the wild-type protein. However, the apparent equilibrium constants () in the steady state, averaged with statistical factors for these mutants, are significantly smaller than those for the wild-type protein, indicating that the intermediates in the regeneration of the mutants are relatively less stable by 0.32 kcal/mol. This difference is due to the decrease in the average rate constants for intramolecular disulfide-bond formation () for the mutant proteins. Loop entropy calculations indicate that the increase in the average length of all possible disulfide loops of the mutants due to the replacement of Cys65 and Cys72 is not sufficient to account for the observed reduction of the values of for the mutants. Therefore, it is the removal of energetic factors (arising from the loss of the 65-72 disulfide loop) that leads to deceleration of the regeneration of the mutant proteins. The formation of the 65-72 disulfide loop in the regeneration of wild-type RNase A appears to facilitate the subsequent folding events.

Animals↗
PubMed1996

[Studies on development of disulfide bond forming reaction and the application to regioselective disulfide formation].

An efficient method for the disulfide bond formation in peptides by the silylchloride-sulfoxide system is described. Methyltrichlorosilane in trifluoroacetic acid, in the presence of diphenylsulfoxide, is found to cleave various S-protecting groups of cysteine to form cystine directly within 10 to 30 min. No side reactions were observed with nucleophilic amino acids such as Met, His, or Tyr, except for Trp, under the reaction conditions of the silylchloride-sulfoxide treatment. A chlorination of the indole moiety of unprotected Trp, rather than the sulfur-sulfur bond formation, is a dominant reaction when the peptide containing unprotected Trp is treated with the chlorosilane-sulfoxide. However, the disulfide bond can be formed efficiently with no modification at the indole ring by the treatment of the peptide having formyl-protected Trp residue with the silylchloride-sulfoxide system. The formyl group is removed by a brief treatment at basic pH without affecting the disulfide bond formed by the silylchloride-sulfoxide treatment. Total synthesis of human insulin, a two chain peptide containing three disulfide bonds, was achieved unambiguously by sequential and selective formation of disulfide bonds in the protein for the first time. The key reaction in the synthesis is regioselective formation of three disulfide bonds separately using the silyl chloride method described above. Prior to the insulin synthesis, it was confirmed by the syntheses of double-disulfide peptides: b-hANP, unnatural parallel dimer of a-hANP, and human endothelin-1 that no disulfide exchange occurred during the silyl chloride treatment. Using three orthogonal thiol protecting groups, Trt, Acm, and But, three disulfide bonds of human insulin were efficiently constructed by the successive reactions using thiolysis, iodine oxidation, and the sily1 chloride method. Each reaction for the stepwise disulfide formation proceeded within 15 to 60 min with no polymeric product and no solubility problem. The synthetic human insulin had the correct structure and was indistinguishable from natural human insulin.

Amino Acid Sequence↗
PubMed1987

Experimental human exposure to carbon disulfide. I. Respiratory uptake and elimination of carbon disulfide under rest and physical exercise.

Six human volunteers were exposed to 10 and 20 ppm carbon disulfide at rest and to 3 and 10 ppm carbon disulfide under a 50 W level of physical exercise during four consecutive periods of 50 min. Every 5 min a sample was taken from the mixed exhaled air in which the concentration of carbon disulfide was determined. It was established that only an apparent steady state was reached during this exposure period. The retention values were established as 0.374 (SD = 0.106; n = 239) for exposure to 10 ppm carbon disulfide at rest and as 0.410 (SD = 0.103; n = 239) for exposure to 20 ppm carbon disulfide at rest. During exposure to 10 ppm and 3 ppm carbon disulfide, combined with a 50 W level of physical exercise, the retention values decreased to 0.286 (SD = 0.083; n = 239) and 0.277 (SD = 0.049; n = 239) respectively. Thereby, the measured individual retention values of carbon disulfide show considerable interindividual differences. The respiratory uptake of carbon disulfide (mg CS2) proved significantly influenced by the amount of body fat estimated from skinfold thickness measurements. The respiratory elimination of carbon disulfide in the exhaled air can be described by means of a two-exponential decay.

Adult↗
PubMed1985

Peptide mapping of bovine pancreatic ribonuclease A by reverse-phase high-performance liquid chromatography. II. A two-dimensional technique for determination of disulfide pairings using a continuous-flow disulfide-detection system.

A procedure, developed for the cleavage and reversible blocking of disulfide bonds of proteins by S-sulfonation in preparation for peptide mapping, was applied to ribonuclease A. The complete peptide maps of sulforibonuclease A using limited Staphylococcus aureus protease digestion, tryptic digestion, and tryptic followed by chymotryptic digestion are presented. A description is given of an adaptation of the sulfonation procedure which forms the basis of a sensitive (5-pmol detection limit) and quantitative (+/- 5%) disulfide-detection system for the continuous monitoring of HPLC column effluents for disulfide-containing compounds. The sulfonation procedure, peptide maps, and disulfide-detection system are the key ingredients in a two-dimensional reverse-phase HPLC technique for the determination of disulfide pairings. The applicability of this technique is demonstrated by determining the known disulfide pairings of ribonuclease A. It is also shown that there is no disulfide interchange under the digestion conditions used. This technique is suitable for determining the distributions of disulfide pairings in the intermediates present in the oxidative folding of disulfide-containing proteins.

Animals↗
PubMed1993

On the involvement of intramolecular protein disulfide in the irreversible inactivation of 3-hydroxy-3-methylglutaryl-CoA reductase by diallyl disulfide.

Treatment with diallyl disulfide, a constituent of garlic oil, irreversibly inactivated microsomal and a soluble 50 kDa form of HMG-CoA reductase. No radioactivity was found to be protein-bound on treating the soluble enzyme with [35S]diallyl disulfide, indicating the absence of the mixed disulfide of the type allyl-S-S-protein. SDS-PAGE and Western blot analyses of the diallyl-disulfide-treated protein showed no traces of the dimer of the type protein-S-S-protein, but clearly indicated BME-reversible increased mobility, as expected of an intramolecular protein disulfide. The sulfhydryl groups, as measured by alkylation with iodo[2-14C]acetic acid, were found to decrease in the diallyl-disulfide-treated enzyme protein. Tryptic peptide analysis also gave support for the possible presence of disulfide-containing peptides in such a protein. It appears that diallyl disulfide inactivated HMG-CoA reductase by forming an internal protein disulfide that became inaccessible for reduction by DTT, and thereby retaining the inactive state of the enzyme.

Allyl Compounds↗
PubMed1998

Determination of disulfide bonds in highly bridged disulfide-linked peptides by matrix-assisted laser desorption/ionization mass spectrometry with postsource decay.

Matrix-assisted laser desorption/ionization mass spectrometry with postsource decay was used to generate fragment ions from peptide fragments containing heteropeptides linked together by two disulfide bonds. Postsource decay analysis of these peptide samples generates a series of singly charged fragment ions that, in addition to the peptide sequence ions, provide useful information for assigning disulfide arrangement in highly bridged disulfide-linked peptides. The assignment was made possible by fragmentation at peptide bonds between two Cys residues in a peptide that constitutes the highly bridged fragment, while retaining the disulfide linkage to the other peptide. Fragmentation using other types of instruments, such as quadrupole ion-trap mass spectrometry with collision-induced dissociation, usually did not generate such fragment ions. The data obtained from postsource decay also provide fragment ions derived from both symmetric and nonsymmetric cleavages of disulfide bonds. The present method is a highly sensitive technique which requires no further sample handling and should be complementary to other classical chemical methods. The method proved useful in facilitating the assignment of disulfide structure in tumor necrosis factor binding protein (TNFbp), which contains 162 amino acids and 13 disulfide bonds (Jones, M.; et al. Biochemistry, in press). Postsource decay analysis of large disulfide-containing peptides usually produces no fragmentation but generates a series of high-intensity ions derived from both symmetric and nonsymmetric cleavages of disulfide bonds.

Disulfides↗
PubMed1995

Mixed disulfide intermediates during the reduction of disulfides by Escherichia coli thioredoxin.

The reduction of disulfides by thioredoxin involves a two-step mechanism. The first step features an intermolecular attack of Cys32 of thioredoxin on the disulfide with formation of a protein mixed disulfide and release of 1 equiv of thiol. The second step involves intramolecular breakdown of the mixed disulfide intermediate via attack of Cys35 with concomitant formation of the oxidized protein and release of a second equivalent of thiol. Study of mixed disulfide intermediates for Escherichia coli thioredoxin is exceedingly difficult because the second step is highly favorable. We have studied these intermediates via two approaches. First, Cys35 can be mutated to the similar but chemically nonreactive residue serine. This precludes breakdown of the intermediate. Second, "mass action trapping" techniques can be used because the second step of the mechanism is first-order in the forward direction and second-order in the reverse direction. This has yielded a thermodynamic breakdown of the reaction into its two component steps. Results for reaction of thioredoxin and 2-hydroxyethyl disulfide indicate that about half of the free energy change for the entire process is associated with the first step. Comparison with a small molecule cysteine analog suggests that significant interactions stabilize the mixed disulfide intermediate. Two-dimensional NMR analysis of the C35S thioredoxin 32C-beta-mercaptoethanol mixed disulfide shows packing interactions between the mixed disulfide moiety and Trp31 and Ile75. Additionally, studies with C35S thioredoxin show that substitution of the cysteine residue slightly perturbs the equilibrium for the first step in the reaction.(ABSTRACT TRUNCATED AT 250 WORDS)

Binding Sites↗
PubMed1978

Formation of interchain disulfide bonds in Bence Jones proteins and Fab(t) fragments of immunoglobulin G through thiol-disulfide interchange.

The formation of interchain disulfide bonds from partially reduced Bence Jones protein (Nag, type lambda) and Fab(t) fragments of IgG1 myeloma proteins was studied in the presence of various disulfide reagents. The results could be well explained in terms of the scheme proposed previously (Kishida et al. (1976) J. Biochem. 79, 91-105). In this scheme, it was assumed that two kinds of intermediate, which form mixed disulfides with either of the paired thiol groups, are produced. For type lambda Bence Jones proteins, only one of the two intermediates can form the inter L-L disulfide bond. The fraction of intermediate having the ability to form the inter L-L disulfide bond was estimated to be 72% of the total Nag protein and was the same irrespective of the kind of disulfide reagent examined. For Fab(t), on the other hand, both intermediates equally can form the inter Fd-L disulfide bond. On the basis of the results with cystamine, it was shown that the formation of an inter Fd-L disulfide bond from the intermediate proceeds about 100 times as rapidly as that of an inter L-L disulfide bond.

Bence Jones Protein↗
PubMed2005

Impact of an easily reducible disulfide bond on the oxidative folding rate of multi-disulfide-containing proteins.

The burial of native disulfide bonds, formed within stable structure in the regeneration of multi-disulfide-containing proteins from their fully reduced states, is a key step in the folding process, as the burial greatly accelerates the oxidative folding rate of the protein by sequestering the native disulfide bonds from thiol-disulfide exchange reactions. Nevertheless, several proteins retain solvent-exposed disulfide bonds in their native structures. Here, we have examined the impact of an easily reducible native disulfide bond on the oxidative folding rate of a protein. Our studies reveal that the susceptibility of the (40-95) disulfide bond of Y92G bovine pancreatic ribonuclease A (RNase A) to reduction results in a reduced rate of oxidative regeneration, compared with wild-type RNase A. In the native state of RNase A, Tyr 92 lies atop its (40-95) disulfide bond, effectively shielding this bond from the reducing agent, thereby promoting protein oxidative regeneration. Our work sheds light on the unique contribution of a local structural element in promoting the oxidative folding of a multi-disulfide-containing protein.

Animals↗