Search PubMed⌕ Search

SEARCH · Search PubMed

Results for “Chlormequat”

Search indexed PubMed citations on genomics, clinical trials, systematic reviews and public health. Explore titles, authors and supplied subject terms, then open the PubMed record.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 37 records · Page 2Linked to original sources

Determination of chlormequat and mepiquat in foods by liquid chromatography/mass spectrometry or liquid chromatography/tandem mass spectrometry: interlaboratory study.

Interlaboratory validation studies have been performed on 2 methods for the determination of chlormequat (CLQ) and mepiquat (MPQ). Both methods used identical extraction procedures and stable isotope internal standardization but differed in the use of liquid chromatography/mass spectrometry (LC/MS) or LC/tandem mass spectrometry (LC/MS/MS) for the determination, the amount of internal standard used, and the expected limit of detection. After addition of deuterated internal standards, CLQ and MPQ were extracted with methanol-water and determined by LC//MS or LC/MS/MS with positive electrospray ionization. Eight European laboratories participated in the LC/MS method study, analyzing mushroom, pear, wheat flour, and fruit puree with residues of CLQ in the range 0.040-1.19 mg/kg and of MPQ in the range 0.041-0.39 mg/kg. For CLQ, the Horwitz ratio (HoRat) values for individual test materials/levels were in the range 0.85-1.13 with a mean of 1.00, showing good method performance. For MPQ, the Ho values for mushroom, pear (both levels), and wheat flour were in the range 0.83-0.94, again indicating good method performance. For the determination of MPQ in infant food (fruit puree) at 0.041 mg/kg, the Ho was 1.7 when a value of 0 reported by one participant was excluded. In the LC/MS/MS study, in which 11 laboratories participated, a separate sample set was analyzed with residues of CLQ in the range 0.007-1.03 mg/kg and of MPQ in the range 0.008-0.72 mg/kg. Ho values for CLQ were in the range 0.27-1.36 and for MPQ in the range 0.51-2.10, all corresponding to acceptable method performance.

Calibration↗

Formation of gas-phase clusters monitored during electrospray mass spectrometry: a study of quaternary ammonium pesticides.

Gas-phase cluster formation between the quaternary ammonium pesticides paraquat, diquat, difenzoquat, chlormequat and mepiquat, and chloride and acetate anions present in a liquid chromatography (LC) mobile phase, has been studied using electrospray mass spectrometry. The clusters of paraquat, mepiquat and chlormequat were revealed over the entire m/z range of the mass spectrometer, and their formation is dependent on the concentrations of both the cationic and the anionic species. Mepiquat and chlormequat form clusters of the type [2M(q)(+) + A(-)](+), where M(q)(+) is the quaternary ammonium cation and A(-) is the anion. Paraquat forms a cluster species with ammonia and also an ion-pair complex with chloride anions. Diquat and difenzoquat did not form observable ion-pair complexes or clusters with any of the anions studied. Competitive binding of acetate and chloride anions reflects the higher charge density of chloride, which forms the dominant clusters with mepiquat and chlormequat. The formation of cluster species has implications for the quantification of quaternary ammonium pesticides and may have an influence on the linearity of calibrations.

Acetates↗

[The effect of pesticides on the protozoan Tetrahymena pyriformis].

The toxic effect of the following pesticides was examined: metathion (doses from 1.49 micrograms to 100.0 g per litre of medium), phenmedipham (doses from 24.42 micrograms to 400.0 mg per litre of medium), gamma-hexachlorocyclohexane (doses from 122.07 micrograms to 250.0 mg per litre of medium), and chlormequat (doses from 305.16 micrograms to 20.0 g per litre of medium). The tests were performed on the protozoan Tetrahymena pyriformis. The LD50 of metathion was found to be 8.94 micrograms per litre and the LD100 ranged from 23.84 to 47.68 micrograms per litre. In phenmedipham the LD50 ranged from 12.5 to 25.0 mg per litre and its LD100 was above 400.0 mg per litre. The LD50 of gamma-hexachlorocyclohexane is 976.56 micrograms per litre and LD100 about 7.91 mg per litre. The LD50 of chlormequat ranged from 312.5 to 625.0 mg per litre and LD100 was about 20.0 g per litre of medium.

Carbamates↗

Determination of quaternary ammonium pesticides by liquid chromatography-electrospray tandem mass spectrometry.

A method for the direct determination of paraquat, diquat, chlormequat and difenzoquat in water samples, using an on-line solid-phase extraction-liquid chromatography-tandem mass spectrometry system was developed. No sample preparation was required and the detection limits were below the European Union maximum residue levels. The chromatographic separation was performed using an XTera MS C8 column. The concentration of the ion pair reagent, the pH and the gradient elution were optimized to give high recoveries and good chromatographic resolution between quats. The detection was carried out using an ion trap as mass analyzer. Parameters such as the magnitude and duration of the resonant excitation voltage and the magnitude of the trapping RF voltage for full scan tandem mass spectrometry (MS-MS) experiments were studied to establish the optimal experimental conditions. Moreover, the accurate optimization of these parameters allowed MS-MS experiments of low mass ions, below m/z 200, providing unambiguous peak identification. Finally, the reproducibility of the proposed method was shown by good run-to-run and day-to-day precision values and its applicability to the determination of quats in drinking water was evaluated using spiked samples.

Chlormequat↗

Tandem mass spectrometric analysis of quaternary ammonium pesticides.

A detailed MS(n) study on an ion trap instrument of the quaternary ammonium pesticides paraquat, diquat, difenzoquat, mepiquat and chlormequat reveals a number of ions not reported previously, and has allowed examination of the fragmentation pathways. A number of transitions that are highly specific to each quat have been identified. Optimal ion trap operating conditions determined using Simplex optimisation can promote either detection of a particular fragmentation transition or a range of MS/MS product ions with a high overall signal response. Thus, fragmentation conditions were optimised to enhance the specificity or sensitivity of MS/MS methods.

Chromatography, Liquid↗

A review of the acceptable daily intakes of pesticides assessed by WHO.

Over the past three decades, WHO has evaluated and reevaluated, through the Joint FAO/WHO Meeting on Pesticide Residues, 230 pesticides. The acceptable daily intakes (ADIs) of these pesticides are analyzed along with their scientific bases. In most cases, the evaluation process was consistent with the stated general principles and procedures of JMPR. However, the safety factors used in allocating the ADIs of several pesticides seem to be inconsistent with the severity of the toxicity, and thus, may require further consideration. These chemicals are abamectin, dinocap, procymidone, chlormequat, ethion, glyphosate, fentin hydroxide, and fentin compounds. In addition, pesticides that were evaluated many years ago, e.g., bromomethane, might merit a reevaluation in light of any relevant recent data.

Animals↗

Effects of currently used pesticides in assays for estrogenicity, androgenicity, and aromatase activity in vitro.

Twenty-four pesticides were tested for interactions with the estrogen receptor (ER) and the androgen receptor (AR) in transactivation assays. Estrogen-like effects on MCF-7 cell proliferation and effects on CYP19 aromatase activity in human placental microsomes were also investigated. Pesticides (endosulfan, methiocarb, methomyl, pirimicarb, propamocarb, deltamethrin, fenpropathrin, dimethoate, chlorpyriphos, dichlorvos, tolchlofos-methyl, vinclozolin, iprodion, fenarimol, prochloraz, fosetyl-aluminum, chlorothalonil, daminozid, paclobutrazol, chlormequat chlorid, and ethephon) were selected according to their frequent use in Danish greenhouses. In addition, the metabolite mercaptodimethur sulfoxide, the herbicide tribenuron-methyl, and the organochlorine dieldrin, were included. Several of the pesticides, dieldrin, endosulfan, methiocarb, and fenarimol, acted both as estrogen agonists and androgen antagonists. Prochloraz reacted as both an estrogen and an androgen antagonist. Furthermore, fenarimol and prochloraz were potent aromatase inhibitors while endosulfan was a weak inhibitor. Hence, these three pesticides possess at least three different ways to potentially disturb sex hormone actions. In addition, chlorpyrifos, deltamethrin, tolclofos-methyl, and tribenuron-methyl induced weak responses in one or both estrogenicity assays. Upon cotreatment with 17beta-estradiol, the response was potentiated by endosulfan in the proliferation assay and by pirimicarb, propamocarb, and daminozid in the ER transactivation assay. Vinclozolin reacted as a potent AR antagonist and dichlorvos as a very weak one. Methomyl, pirimicarb, propamocarb, and iprodion weakly stimulated aromatase activity. Although the potencies of the pesticides to react as hormone agonists or antagonists are low compared to the natural ligands, the integrated response in the organism might be amplified by the ability of the pesticides to act via several mechanism and the frequent simultaneous exposure to several pesticides.

Animals↗

Effects of pesticides on isolated rat hepatocytes, mitochondria, and microsomes.

Twenty-seven pesticides, with which people are concerned, especially as residues in food, were examined in vitro for their effects on hepatocytes, mitochondria, and microsomes isolated from male rats. Nineteen pesticides returned non-protein sulfhydryl (NPSH) contents in hepatocytes to less than 80% of control at concentrations from 10(-3) to 10(-5) M after 90 min incubation. Among them, only dichlofluanid was reactive with glutathione non-enzymatically. Lipid peroxidation in hepatocytes was stimulated by five pesticides at 10(-3) M, with edifenphos being the most potent peroxidant. Cell viability was considerably decreased by incubation with chlorobenzilate, edifenphos, dichlofluanid, and chinomethionat at 10(-3) M, and in these cases, depletion of cellular adenosine 5'-triphosphate (ATP) contents proceeded to cell death. With respect to isolated mitochondrial respiration, six pesticides inhibited state 3 and/or state 4 respiration rates at concentrations from 10(-3) to 10(-5) M, whereas three pesticides uncoupled state 4 respiration at 10(-3) M. With respect to isolated microsomal lipid peroxidation, seven pesticides, five of which were organophosphorus compounds, were peroxidative at concentrations from 10(-3) to 10(-5) M, whereas seven pesticides were antioxidative at concentrations from 10(-3) to 10(-7) M. Only three pesticides, aldicarb, maleic hydrazide, and chlormequat chloride had no effect on any parameters tested at 10(-3) M. Pesticides that affected isolated mitochondria or microsomes did not necessarily have any effect on isolated hepatocytes.

Animals↗

Gibberellin inhibitors improve embryogenic tissue initiation in conifers.

Somatic embryogenesis (SE), the most promising technology to multiply high-value coniferous trees from advanced breeding and genetic engineering programs, is expected to play an important role in increasing productivity, sustainability, and uniformity of future forests in the United States. For commercial use, SE technology must work with a variety of genetically diverse trees. Initiation in loblolly pine (LP; Pinus taeda L.), our main focus species, is often recalcitrant for desirable genotypes. Initiation of LP, slash pine (SP; Pinus elliottii), Douglas-fir (DF; Pseudotsuga menziesii), and Norway spruce (NS; Picea abies) were improved through the use of paclobutrazol, a gibberellin synthesis inhibitor. Paclobutrazol was effective at concentrations ranging from 0.25 mg/l to 3.0 mg/l (0.85-10.2 microM) and optimal in LP at 1.0 mg/l. Using control media (no paclobutrazol) and 0.33-1.0 mg/l paclobutrazol, initiation percentages in LP, SP, DF, and NS were improved from 37.7% to 44.2% (across experiments), 19.3% to 28.5%, 16.9% to 23.7%, and 38.8% to 48.5%, respectively. Other gibberellin inhibitors such as flurprimidol, chlormequat-Cl, and daminozide also caused statistically significant increases in LP initiation when added to the medium at concentrations of 0.34, 10.0, and 1.0 microM, respectively. No detrimental effects on subsequent embryo development were observed when 29 new initiations from medium without GA inhibitor and 28 new initiations from medium containing paclobutrazol were tracked through culture capture, liquid culture establishment, cotyledonary embryo development, and germination.

Culture Techniques↗

Application of internal quality control to the analysis of quaternary ammonium compounds in surface and groundwater from Andalusia (Spain) by liquid chromatography with mass spectrometry.

A method has been developed for the simultaneous determination of paraquat (PQ), deiquat (DQ), chlormequat (CQ) and mepiquat (MQ) in water samples by liquid chromatography (LC) coupled with electrospray ionization mass spectrometry (MS). The LC separations of the target compounds, as well as their MS parameters, were optimized in order to improve selectivity and sensitivity. Separation was carried out in a Xterra C8 column, using as mobile phase methanol-heptafluorobutyric acid (HFBA) in isocratic mode. The molecular ion was selected for the quantitation in selected ion monitoring (SIM) mode. Off-line solid-phase extraction (SPE) was applied with silica cartridges in order to preconcentrate the compounds from waters. Detection limits were in the range 0.02-0.40 microg l(-1). Recovery range varied between 89 and 99.5% with precision values lower than 6%. The method has been applied successfully to the analysis of both surface and groundwater samples from agricultural areas of Andalusia (Spain), using well defined internal quality control (IQC) criteria. The results revealed the presence of deiquat and paraquat in some samples.

Chromatography, High Pressure Liquid↗

Capillary electrophoresis-mass spectrometry for the analysis of quaternary ammonium herbicides.

Conditions for the simultaneous determination of the three herbicides paraquat, diquat and difenzoquat and the two plant growth regulators chlormequat and mepiquat by pressure-assisted capillary electrophoresis coupled to mass spectrometry (ion-trap) using electrospray as ionisation source have been established. A 200 mM formic acid-ammonium formate buffer solution at pH 3.0 with 50% of methanol was used as carrier electrolyte. Some capillary electrophoresis-mass spectrometry parameters such as sheath liquid and sheath gas flow-rates, sheath liquid composition, electrospray voltage andthe CE capillary position were optimised. The MS and MS-MS spectra of positive ions were studied in order to obtain structural information for the confirmation of the identity. The use of labelled standards allowed to confirm fragment ions assignation. The detection limits, based on a signal-to-noise ratio of 3:1, were between 0.5 and 2.5 mg l(-1) with hydrodynamic injection (10 s) and between 1 and 10 microg l(-1) with elecrokinetic injection (20 s, 10 kV) using standards in ultrapure water. Quality parameters such as linearity and run-to-run precision (n=6) were established. Quantitation was carried out using labelled standards. The method has been applied to the analysis of contaminated irrigation water and spiked mineral water samples.

Electrophoresis, Capillary↗

Alternative calibration approaches to compensate the effect of co-extracted matrix components in liquid chromatography-electrospray ionisation tandem mass spectrometry analysis of pesticide residues in plant materials.

The aim of this study was to evaluate the applicability of different calibration approaches in a multi- and single-residue analysis of modern pesticides in plant matrices using liquid chromatography-electrospray mass spectrometry (HPLC-ESI-MS). In the first set of experiments the determination of eight pesticides representing different groups of polar/unstable pesticides (carbamates, benzimidazoles, azoles, benzoylphenylurea) in apple samples was performed. The trueness and precision of data obtained by using: (i) external solvent standard calibration, (ii) external matrix-matched standard calibration and (iii) echo-peak internal standard calibration was compared. The last mentioned method is a novel technique providing the possibility to inject internal standard of the same identity as a target analyte, so that its retention time is close to the analyte from the sample. According to expectation, when using external standard solvent calibration the results were under- or overestimated due to suppression or enhancement of analyte's signal by matrix components. On the other hand with the use of matrix-matched calibration accurate data were obtained. With echo-peak technique accurate results comparable to those obtained by matrix calibration were obtained for six out of eight pesticides. In the second set of experiment we used the echo-peak technique to overcome the problem with the response instability in the analysis of chlormequat in pear concentrate samples. As an internal standard method the echo-peak technique provided the possibility of monitoring of signal decrease during the analytical sequence and to compensate this decrease by relating sample peak area relatively to this internal standard.

Calibration↗

Evaluation and optimization of an on-line admicelle-based extraction-liquid chromatography approach for the analysis of ionic organic compounds.

Admicelles-based solid-phase extraction (SPE) was on-line coupled with liquid chromatography/electrospray ionization/ion trap mass spectrometry, and it was proposed for the extraction of ionic organic compounds based on the formation of surfactant-analyte ion pairs. The approach was illustrated by studying the preconcentration of quaternary ammonium herbicides (quats) on sodium dodecyl sulfate (SDS) admicelles produced on alumina. Optimization of the parameters affecting SPE were studied on the basis that admicelles are dynamic entities in equilibrium with the aqueous phase. Some general guidelines could be established for method development from the results obtained. Factors influencing on-line operation were elucidated. On-line regeneration of the sorbent in each run was easily achieved by disruption of SDS admicelles with methanol and posterior coating of the alumina with SDS. The recovery of quats from drinking water samples were found quantitative for paraquat, diquat, and difenzoquat and above to 70% for chlormequat and mepiquat. Concentration factors of about 250, using sample volumes of 50 mL, were achieved. The detection limits ranged from 10 to 30 ng/L. The approach developed permits compliance with the directives of the European Community for drinking waters (100 ng/L) and goes deeply into the basis of solid-phase extractions that use surfactant-coated mineral oxide as sorbents.

Journal Article↗