Search PubMed⌕ Search

SEARCH · Search PubMed

Results for “WOOD”

Search indexed PubMed citations on genomics, clinical trials, systematic reviews and public health. Explore titles, authors and supplied subject terms, then open the PubMed record.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 343 records · Page 19Linked to original sources
PubMed2004

Leaf photosynthetic traits scale with hydraulic conductivity and wood density in Panamanian forest canopy trees.

We investigated how water transport capacity, wood density and wood anatomy were related to leaf photosynthetic traits in two lowland forests in Panama. Leaf-specific hydraulic conductivity ( k(L)) of upper branches was positively correlated with maximum rates of net CO(2) assimilation per unit leaf area ( A(area)) and stomatal conductance ( g(s)) across 20 species of canopy trees. Maximum k(L) showed stronger correlation with A(area) than initial k(L) suggesting that allocation to photosynthetic potential is proportional to maximum water transport capacity. Terminal branch k(L) was negatively correlated with A(area)/ g(s) and positively correlated with photosynthesis per unit N, indicating a trade-off of efficient use of water against efficient use of N in photosynthesis as water transport efficiency varied. Specific hydraulic conductivity calculated from xylem anatomical characteristics ( k(theoretical)) was positively related to A(area) and k(L), consistent with relationships among physiological measurements. Branch wood density was negatively correlated with wood water storage at saturation, k(L), A(area), net CO(2) assimilation per unit leaf mass ( A(mass)), and minimum leaf water potential measured on covered leaves, suggesting that wood density constrains physiological function to specific operating ranges. Kinetic and static indices of branch water transport capacity thus exhibit considerable co-ordination with allocation to potential carbon gain. Our results indicate that understanding tree hydraulic architecture provides added insights to comparisons of leaf level measurements among species, and links photosynthetic allocation patterns with branch hydraulic processes.

Carbon Dioxide↗
PubMed2004

Dead wood biomass and turnover time, measured by radiocarbon, along a subalpine elevation gradient.

Dead wood biomass can be a substantial fraction of stored carbon in forest ecosystems, and coarse woody debris (CWD) decay rates may be sensitive to climate warming. We used an elevation gradient in Colorado Rocky Mountain subalpine forest to examine climate and species effects on dead wood biomass, and on CWD decay rate. Using a new radiocarbon approach, we determined that the turnover time of lodgepole pine CWD (340+/-130 years) was roughly half as long in a site with 2.5-3 degrees C warmer air temperature, as that of pine (630+/-400 years) or Engelmann spruce CWD (800+/-960 and 650+/-410 years) in cooler sites. Across all sites and both species, CWD age ranged from 2 to 600 years, and turnover time was 580+/-180 years. Total standing and fallen dead wood biomass ranged from 4.7+/-0.2 to 54+/-1 Mg ha(-1), and from 2.8 to 60% of aboveground live tree biomass. Dead wood biomass increased 75 kg ha(-1) per meter gain in elevation and decreased 13 Mg ha(-1) for every degree C increase in mean air temperature. Differences in biomass and decay rates along the elevation gradient suggest that climate warming will lead to a loss of dead wood carbon from subalpine forest.

Altitude↗
PubMed2006

Environmental fluctuations facilitate species co-existence and increase decomposition in communities of wood decay fungi.

A fluctuating environment may facilitate co-existence of species, and high species richness may be important for maintaining ecosystem processes under changing environmental conditions. A positive relationship has been found between species richness and primary production in many experiments, and there is now an increasing interest whether similar relationships also apply to microorganisms and decomposition. Basidiomycete fungi are the primary decomposers of wood with the functional groups brown and white rot fungi, which differ with respect to decay strategy. In this study, 16 species of boreal wood decay fungi, 8 brown rot fungi and 8 white rot fungi, were assembled in artificial communities. The aims were to study species persistence, wood decomposition and metabolic efficiency in fungal communities of increasing levels of species richness under constant and fluctuating temperature regimes. Species persistence was generally low, but temperature fluctuations facilitated co-existence of species. Decomposition was highest at intermediate diversity levels under the fluctuating temperature regime. Metabolic efficiency, estimated as the amount of fungal mycelium formed per amount of degraded wood, decreased with increasing community complexity under the fluctuating temperature regime. Brown and white rot fungi differed in decomposition rates and metabolic efficiency, but no synergistic effects were found where the two functional groups were mixed. This study demonstrates how niche differentiation in a variable environment may act to maintain diversity and function. In our experiment, differences in functional responses to the varying temperature rather than resource partitioning between brown and white rot fungi had significant effects. Niche differentiation is likely to be particularly important in maintaining species diversity in communities of wood decaying fungi, which are known from previous studies to be characterised by intense competition, and where otherwise metabolically costly interactions lead to species exclusion and dominance by highly competitive species.

Basidiomycota↗
PubMed2005

Identification of delta7 phytosterols and phytosteryl glucosides in the wood and bark of several Acacia species.

The wood and bark of four Acacia species growing in Portugal, namely, A. longifolia, A. dealbata, A. melanoxylon, and A. retinodes, were investigated for their sterol content. The lipids fractions of the different wood and bark samples were isolated, and the sterols were identified and quantified by GC-MS. Two delta7 sterols, specifically, spinasterol and dihydrospinasterol, were the main sterols found in considerable amounts, particularly in wood tissues (more than 0.5 g/kg of dry wood in the case of A. melanoxylon and A. retinodes). The corresponding unusual steryl glucosides were also identified in significant amounts in the wood and bark extracts.

Acacia↗
PubMed1986

Mutagenicity assay of emission extracts from wood stoves: comparison with other emission parameters.

The emission from wood stoves of several types of air pollutants has been measured under standardized burning conditions with emphasis on the amount of organic compounds and determination of the mutagenic activity with the Salmonella/microsome assay. The study corroborates earlier findings that conventional wood stoves can be a significant source of hydrocarbon and tar compounds in the ambient air. The emission of mutagenic compounds comprise both compounds requiring mammalian activation and compounds which are active in the test without exogenous activation. The mutagenicity tests show that nitroaromatic compounds are present in wood stove emissions, although the emission of nitrogen oxides is low. A wood stove constructed using the downdraft principle emitted much less hydrocarbons and tar, less mutagenic components and slightly less carbon monoxide than conventional wood stoves.

Air Pollutants↗
PubMed2005

Review of disposal technologies for chromated copper arsenate (CCA) treated wood waste, with detailed analyses of thermochemical conversion processes.

Several alternative methods for the disposal of chromated copper arsenate (CCA) treated wood waste have been studied in the literature, and these methods are reviewed and compared in this paper. Alternative disposal methods include: recycling and recovery, chemical extraction, bioremediation, electrodialytic remediation and thermal destruction. Thermochemical conversion processes are evaluated in detail based on experiments with model compounds as well as experimental and modelling work with CCA treated wood. The latter category includes: determination of the percentage of arsenic volatilised during thermal conversion of CCA treated wood, identification of the mechanisms responsible for arsenic release, modelling of high temperature equilibrium chemistry involved when CCA treated wood is burned, overview of options available for arsenic capture, characterisation of ash resulting from (co-)combustion of CCA treated wood, concerns about polychlorinated dibenzo-p-dioxins/furans (PCDD/F) formation. Finally, the most appropriate thermochemical disposal technology is identified on short term (co-incineration) and on long term (low-temperature pyrolysis or high-temperature gasification).

Air Pollutants↗
PubMed2005

Methane fermentation of Japanese cedar wood pretreated with a white rot fungus, Ceriporiopsis subvermispora.

Methane fermentation of Japanese cedar wood was carried out after pretreatment with four strains of white rot fungi, Ceriporiopsis subvermispora ATCC 90467, CZ-3, CBS 347.63 and Pleurocybella porrigens K-2855. These fungi were cultivated on wood chip media with and without wheat bran for 4-8 weeks. The pretreated wood chip was fermented anaerobically with sludge from a sewage treatment plant. Pretreatments with C. subvermispora ATCC 90467, CZ-3 and CBS 347.63 in the presence of wheat bran for 8 weeks decreased 74-76% of beta-O-4 aryl ether linkages in the lignin to accelerate production of methane. After fungal treatments with C. subvermispora ATCC 90467 and subsequent 30-days methane fermentation, the methane yield reached 35 and 25% of the theoretical yield based on the holocellulose contents of the decayed and original wood, respectively. In contrast, treatment with the three strains of C. subvermispora without wheat bran cleaved 15-26% of the linkage and produced 6-9% of methane. There were no significant accelerating effects in wood chips treated with P. porrigens which has a lower ability to decompose the lignin. Thus, it was found that C. subvermispora, with a high ability to decompose aryl ether bonds of lignin, promoted methane fermentation of softwood in the presence of wheat bran.

Basidiomycota↗
PubMed2005

Evaluation of danger from fermentation-induced spontaneous ignition of wood chips.

Recently we conducted investigations in biological wastes because large pile-up storage of waste wood chips and others caused many fires in Japan. This paper shows the experimental results on wood chips with thermal analysis, by using a Thermogravimetry-differential thermal analysis (TG-DTA) and micro calorimeters, and as well with spontaneous ignition measurements, such as a UN wire mesh cube tester and a spontaneous ignition tester (SIT). Exothermic reaction of wood chips was observed during 45-60 degrees C only by the high sensitive microcalorimeters, TAM and MS 80. This reaction is far apart from the second major reaction by oxidation and is not easy to be recognized by the conventional detectors, like the TG-DTA and the wire mesh cube tester, because their sensitivity cannot meet the strict requirement. Correspondingly, experimental results under the adiabatic condition in the SIT confirmed this theory, in which the onset temperature of spontaneous ignition of wood chips was measured as 50-80 degrees C. This implies that the weak initial reaction at ambient temperatures mainly results from microbial fermentation in the presence of its inherent moisture and possibly gives rise to the further intense combustion sustained by a chemical reaction if the heat cannot be removed from the large scale storage of wood chips.

Fermentation↗
PubMed2006

Leaching of chromated copper arsenate (CCA)-treated wood in a simulated monofill and its potential impacts to landfill leachate.

The proper end-of-life management of chromated copper arsenate (CCA)-treated wood, which contains arsenic, copper, and chromium, is a concern to the solid waste management community. Landfills are often the final repository of this waste stream, and the impacts of CCA preservative metals on leachate quality are not well understood. Monofills are a type of landfill designed and operated to dispose a single waste type, such as ash, tires, mining waste, or wood. The feasibility of managing CCA-treated wood in monofills was examined using a simulated landfill (a leaching lysimeter) that contained a mix of new and weathered CCA-treated wood. The liquid to solid ratio (LS) reached in the experiment was 0.63:1. Arsenic, chromium, and copper leached from the lysimeter at average concentrations of 42 mg/L for arsenic, 9.4 mg/L for chromium, and 2.4 mg/L for copper. Complementary batch leaching studies using deionized water were performed on similar CCA-treated wood samples at LS of 5:1 and 10:1. When results from the lysimeter were compared to the batch test results, copper and chromium leachability appeared to be reduced in the lysimeter disposal environment. Of the three metals, arsenic leached to the greatest extent and was found to have the best correlation between the batch and the lysimeter experiments.

Arsenates↗
PubMed2006

A mass balance approach for evaluating leachable arsenic and chromium from an in-service CCA-treated wood structure.

Many existing residential wood structures, such as playsets and decks, have been treated with chromated copper arsenate (CCA). This preservative chemical can be released from these structures incrementally over time through contact with rainfall. The objective of this study was to evaluate the levels of arsenic and chromium leached from an in-service CCA-treated deck exposed to rainfall, as well as their possible impacts on soils and shallow groundwater. Two monitoring stations, one containing a CCA-treated deck and the other containing an untreated deck as a control, were constructed outside for this study. Rainfall, runoff water from the decks, soils below the decks, and infiltrated water through 0.7-m depth of soil were monitored for arsenic and chromium over a period of 3 years. The concentration of the CCA-treated deck runoff for arsenic (0.114-4.66 mg/L) and chromium (0.008-0.470 mg/L) were significantly (p<0.001) higher than the untreated deck runoff (< or =0.002 mg/L for both). During the 3-year monitoring period, 13% of the arsenic and 1.4% of the chromium were leached from the amount initially present in the CCA-treated wood. Arsenic levels (<0.1-46 mg/kg) in soils under the CCA-treated deck were significantly (p<0.001) higher than under the untreated deck (<0.1-2.7 mg/kg), while chromium levels were statistically the same below the two decks (2.4-9.6 mg/kg). Approximately 94% of the arsenic from the runoff was absorbed in the soils below the CCA-treated deck; the upper 2.5 cm of the soils captured 42% of the total. The infiltrated water concentrations for arsenic (<0.001-0.085 mg/L) and chromium (<0.001-0.010 mg/L) below the CCA-treated deck were both significantly (p<0.001) higher than below the untreated deck (< or =0.006 mg/L). The amounts of arsenic found in the infiltrated water below the CCA-treated deck represented 6% of total arsenic leached and less than 0.7% of the initial mass in the wood. The study demonstrated that exposure of a CCA-treated deck to rainfall resulted in elevated arsenic concentrations in both runoff and soil. Although only a relatively small fraction of the initial arsenic from the wood was found to infiltrate through the soil, these impacts were significant and caused the infiltrated water to exceed drinking water standards. The study suggests that potential exposures to arsenic exist indirectly through an environment that is contaminated with arsenic leached from in-service CCA-treated wood.

Architecture↗
PubMed2004

Improving the two-step remediation process for CCA-treated wood: Part I. Evaluating oxalic acid extraction.

In this study, three possible improvements to a remediation process for chromated-copper-arsenate- (CCA) treated wood were evaluated. The process involves two steps: oxalic acid extraction of wood fiber followed by bacterial culture with Bacillus licheniformis CC01. The three potential improvements to the oxalic acid extraction step were (1) reusing oxalic acid for multiple extractions, (2) varying the ratio of oxalic acid to wood, and (3) using a noncommercial source of oxalic acid such as Aspergillus niger, which produces oxalic acid as a metabolic byproduct. Reusing oxalic acid for multiple extractions removed significant amounts of copper, chromium, and arsenic. Increasing the ratio of wood to acid caused a steady decline in metal removal. Aspergillus niger removed moderate amounts of copper, chromium, and arsenic from CCA-treated wood. Although A. niger was effective, culture medium costs are likely to offset any benefits. Repeated extraction with commercial oxalic acid appears to be the most cost-effective method tested for the two-step process.

Arsenates↗
PubMed2006

Confirmation of E. coli among other thermotolerant coliform bacteria in paper mill effluents, wood chips screening rejects and paper sludges.

Paper sludges are solid wastes material generated from the paper production, which have been characterized for their chemical contents. Some are rich in wood fiber and are a good carbon source, for example the primary and de-inking paper sludges. Others are made rich in nitrogen and phosphorus by pressing the activated sludge, resulting from the biological water treatments, with the primary sludge, yielding the combined paper sludge. Still, in the absence of sanitary effluents very few studies have addressed the characterization of their coliform microflora. Therefore, this study investigated the thermotolerant coliform population of one paper mill effluent and two paper mill sludges and wood chips screening rejects using chromogenic media. For the first series of analyses, the medium used was Colilert broth and positive tubes were selected to isolate bacteria in pure culture on MacConkey agar. In a second series of analyses, double selective media, based on ss-galactosidase and ss-glucuronidase activities, were used to isolate bacteria. First, the presence of thermotolerant coliforms was detected in low numbers in most water effluents, but showed that the entrance of the thermotolerant coliforms was early in the industrial process. Also, large numbers of thermotolerant coliforms, i.e., 7,000,000 MPN/g sludge (dry weight; d.w.), were found in combined sludges. From this first series of isolations, bacteria were purified on MacConkey medium and identified as Citrobacter freundii, Enterobacter sp, E. sakazakii, E. cloacae, Escherichia coli, K. pneumoniae, K. pneumoniae subsp. rhinoscleromatis, K. pneumoniae subsp. ozaenae, K. pneumoniae subsp. pneumoniae, Pantoea sp, Raoultella terrigena, R. planticola. Second, the presence of thermotolerant coliforms was measured at more than 3,700-6,000 MPN/g (d.w) sludge, whereas E. coli was detected from 730 to more than 3,300 MPN/g (d.w.) sludge. The presence of thermotolerant coliform bacteria and E. coli was sometimes detected from wood chips screening rejects in large quantities. Also, indigenous E. coli were able to multiply into the combined sludge, and inoculated E. coli isolates were often able to multiply in wood chips and combined sludge media. In this second series of isolations, API20E and Biolog identified most isolates as E. coli, but others remained unidentified. The sequences of the 16S rDNA confirmed that most isolates were likely E. coli, few Burkholderia spp, but 10% of the isolates remained unidentified. This study points out that the coliform bacteria are introduced by the wood chips in the water effluents, where they can survive throught the primary clarifier and regrow in combined sludges.

DNA, Bacterial↗
PubMed1998

Acetylcholine and tachykinin receptor antagonists attenuate wood smoke-induced bronchoconstriction in guinea pigs.

To study the mechanisms of wood smoke-induced bronchoconstriction, we measured total lung resistance (RL) and dynamic lung compliance (Cdyn) in anesthetized and mechanically ventilated guinea pigs. Airway exposure to various doses of wood smoke (lauan wood; 5, 10, and 15 breaths) resulted in a dose-dependent increase in RL and decrease in Cdyn. The smoke-induced changes in RL and Cdyn were significantly attenuated by pretreatment with atropine, CP-96,345 [(2S,3S)-cis-2-(diphenylmethyl)-N-((2-methoxyphenyl)-methyl)-1-aza bicyclo(2.2.2.)-octan-3-amine; a tachykinin NK1 receptor antagonist], and SR-48,968 [(S)-N-methyl-N(4-(4-acetylamino-4-phenylpiperidino)-2-(3,4-dichlorophen yl)-butyl)benzamide; a tachykinin NK2 receptor antagonist] in combination, atropine alone, and SR-48,968 alone, but were not significantly affected by pretreatment with the inactive enantiomers of CP-96,345 and SR-48,968, CP-96,345 alone, indomethacin (a cyclooxygenase inhibitor), and MK-571 [((3-(3-(2-(7-chloro-2-quinolinyl)ethenyl)phenyl((3-dimethyl amino-3-oxo-propyl)thio)methyl)propanoic acid; a leukotriene D4 receptor antagonist]. The activity of airway neutral endopeptidase, a major enzyme for tachykinin degradation, was not significantly influenced by wood smoke during the development of bronchoconstriction. We conclude that: (1) both cholinergic mechanisms and endogenous tachykinins, but not cyclooxygenase products or leukotriene D4, play an important role in the acute bronchoconstriction induced by wood smoke, and (2) the contribution of tachykinins to this airway response is primarily mediated via the activation of tachykinin NK2 receptors, but is not associated with inactivation of the airway neutral endopeptidase.

Animals↗
PubMed2001

Lipophilic extractives in process waters during manufacturing of totally chlorine free kraft pulp from eucalypt wood.

The chemical composition of lipophilic extractives from process waters throughout a totally chlorine free (TCF) bleaching sequence after kraft pulping of eucalypt wood has been studied. These compounds are among the most problematic wood constituents for both TCF and zero liquid effluent (ZLE) processes, since they tend to accumulate in circuits resulting in the formation of the so-called pitch deposits causing serious problems in the pulp and paper industry. Pitch deposits collected at different parts of the pulp mill were also characterized and their composition compared with that of lipophilic compounds in process waters and Eucalyptus globulus wood. The identification of these compounds from process waters, wood and pitch deposits was performed by gas chromatography and gas chromatography-mass spectrometry using short- and medium-length high temperature capillary columns. Sterols, sterol esters, steroid ketones and steroid hydrocarbons were the main compounds identified. These chemical species arise from eucalypt wood extractives that survive the pulping and are released from pulp into the process waters during the bleaching process. Finally, they can deposit in pulp and on different parts of the mill or remain suspended in process waters being discharged in effluents.

Chromatography, Gas↗
PubMed2003

Colonisation of spruce roots by two interacting ectomycorrhizal fungi in wood ash amended substrates.

Interactions between two ectomycorrhizal fungal species, Piloderma croceum Erikss. and Hjortst. and Piloderma sp. 1 (found to colonise spruce roots and wood ash granules in the field), were investigated in wood ash amended substrates. The comparative ability of these fungi to colonise roots of non-mycorrhizal spruce (Picea abies (L.) Karst.) seedlings was studied in relation to factorial combinations of wood ash and N fertilisation. Non-mycorrhizal spruce seedlings (bait seedlings) were planted together with spruce seedlings colonised by P. croceum or Piloderma sp. 1. The growth substrate was a sand-peat mixture with wood ash or no ash and supplied with two levels of N, so that four substrate combinations were obtained. Piloderma sp. 1 mycelia colonised around 60% of the fine roots of bait seedlings in ash treatments regardless of N level and around 20-26% in treatments without ash. P. croceum only colonised 8% of the root tips in the presence of ash but 56% of the root tips in the low-N treatment without ash. However, in the high-N treatment without ash the colonisation level was reduced to around 30%. Total numbers of root tips per seedling did not vary significantly between the treatments. Possible reasons for the competitive advantage of Piloderma sp. 1 in wood ash fertilised substrate are discussed.

Basidiomycota↗
PubMed2001

Characteristics of wood ash and influence on soil properties and nutrient uptake: an overview.

Wood industries and power plants generate enormous quantities of wood ash. Disposal in landfills has been for long a common method for removal. New regulations for conserving the environment have raised the costs of landfill disposal and added to the difficulties for acquiring new sites for disposal. Over a few decades a number of studies have been carried out on the utilization of wood ashes in agriculture and forestry as an alternative method for disposal. Because of their properties and their influence on soil chemistry the utilization of wood ashes is particularly suited for the fertility management of tropical acid soils and forest soils. This review principally focuses on ash from the wood industry and power plants and considers its physical, chemical and mineralogical characteristics, its effect on soil properties, on the availability of nutrient elements and on the growth and chemical composition of crops and trees, as well as its impact on the environment.

Hydrogen-Ion Concentration↗
PubMed2001

Influence of substrate wood-chip particle size on shiitake (Lentinula edodes) yield.

Wood chips from four commercial hardwood sawmills were screened with 10 US standard sieves (4-0.21 mm) to assess particle size distributions. 96-98% of wood chips were < 4 mm while 95-99% of particles were > 0.21 mm. The majority (mean = 64.5%) of wood chips passed through US standard sieve size 14 (< 1.4 mm). Shiitake (Lentinula edodes) was grown in three crops to determine the effect of four particle size classes (1 = 2.8-4 mm; 2 = 1.7-2.8 mm; 3 = 0.85-1.7 mm; 4 = < 0.85 mm) on mushroom yield. Yields from substrates prepared with wood chips from class 4 (< 0.85 mm) were lower by 27.7%, 12.4% and 2% (mean = 14.9%) for Crops I, II, and III, respectively, when compared to controls. Profiling of wood chips may help growers optimize their production media and reduce production costs.

Crops, Agricultural↗
PubMed2003

Physical-mechanical properties and chemical composition of Pinus taeda mature wood following a forest fire.

The objective of this study was to assess the effects of heat released during forest fires on wood properties of Pinus taeda L. trees submitted to different burning levels (increasing fire intensity, I-IV). Wood samples were collected from trees in each of the burning levels and also from trees not affected by fire (control). Specimens were then extracted to evaluate the physical and mechanical wood properties; chemical composition was evaluated only for burning level IV and control. The analysis of the results showed that fire effects over the physical-mechanical properties and chemical composition in all burning levels did not cause sufficient chemical degradation and strength reduction, which could be cause for rejection of those woods for normal use. In the case of structural use caution should be adopted for the wood from burning levels III and IV, which had their mechanical property values reduced.

Chemical Phenomena↗