Search PubMed⌕ Search

SEARCH · Search PubMed

Results for “VOC”

Search indexed PubMed citations on genomics, clinical trials, systematic reviews and public health. Explore titles, authors and supplied subject terms, then open the PubMed record.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 343 records · Page 19Linked to original sources

Contaminated site remedial investigation and feasibility removal of chlorinated volatile organic compounds from groundwater by activated carbon fiber adsorption.

Groundwater contaminated by dense, non-aqueous phase liquids (DNAPLs) such as chlorinated solvents has become a serious problem in some regions of Taiwan. The sources of these contaminants are due to industrial discharges. These chlorinated volatile organic compounds (VOCs) have been proven to be carcinogenic to humans. The groundwater is used for domestic drinking water supply in some cities of Taiwan and the severely contaminated groundwater has to be treated in order to meet the requirement of drinking water standards. This study covers two areas of work. In the first part, polluted groundwater samples were collected from the contaminated site and analytical results indicated measurable concentrations of 12 representative chlorinated VOCs in water samples. The primary VOCs detected included trichloroethene (TCE), tetrachloroethene (PCE), 1,1,2-trichloroethane (1,1,2-TCA), and 1,1-dichloroethene (1,1-DCE). Second, to remove VOCs groundwater was treated using adsorption on activated carbon fiber (ACF). This involved pumping groundwater through vessels containing ACF. Most VOCs, including TCE, PCE, 1,1,2-TCA, and DCE, were readily adsorbed onto ACF and are removed from the water stream. Our study showed that the technology was able to significantly reduce chlorinated VOCs concentrations in groundwater.

Adsorption↗

Exposure to volatile organic compounds for individuals with occupations associated with potential exposure to motor vehicle exhaust and/or gasoline vapor emissions.

Workers who work near volatile organic compounds (VOCs) source(s), motor vehicle exhausts and/or gasoline vapor emissions, are suspected to be exposed to highly-elevated VOC levels during their work-time. This study confirmed this suspicion and evaluated the work-time exposure VOCs for traffic police officers, parking garage attendants, service station attendants, roadside storekeepers and underground storekeepers, by measuring the concentrations of six aromatic VOCs in workplace air, or personal air and breath samples. For nearly all target VOCs, the post-work breath concentrations of the workers were slightly or significantly higher than the pre-work breath concentrations, depending on the compound and occupation. Furthermore, both the pre- and post-work breath concentrations of the workers showed elevated levels compared with a control group of college students. The post-work breath concentrations were significantly correlated with the personal air concentrations, while the pre-work breath concentrations were not. Smoking workers were not always exposed to higher aromatic VOC levels than non-smoking workers. The breath and personal air concentrations for all the target compounds were both higher for underground parking garage attendants than for ground-level parking attendants. For all the target compounds except toluene, storekeepers exhibited similar levels of exposure for all store types. Print shopkeepers recorded the highest toluene exposure.

Adult↗

How to measure and evaluate volatile organic compound emissions from building products. A perspective.

The primary emissions of VOCs (e.g. solvents) from building products influence the perceived indoor air quality during the initial decay period. However, secondary emissions will continue thereafter (chemical or physical degradation, e.g. oxidation, hydrolysis, mechanical wear, maintenance), in addition to sorption processes. Emission testing for primary VOC emissions is necessary, but insufficient to characterise the impact of building products in their entire life span on the perceived air quality. Methods to distinguish between the two types of emissions are required. Also, the influence of climate parameters on the emission rates is necessary to know for proper testing. Future product development and selection strategies of new building products should consider the secondary emissions, in addition to the contribution from the use of auxiliary agents for cleaning, maintenance, and other potential impacts either physical or chemical in nature. Some of the requirements for emission testing are discussed in terms of secondary vs. primary emissions in order to develop 'healthier/better' building products for the indoor environment. In addition, some of the assumptions about the possible impact of VOCs on health and comfort in the indoor environment are presented. Odour thresholds for VOCs are one or more orders of magnitude lower than the corresponding airway irritation estimates, and it also appears that chemically non-reactive VOCs are not sufficiently strong irritants to cause airway irritation at concentrations normally encountered indoors. Finally, future requirements for analytical laboratory performances is proposed to accommodate the increasing need to establish which VOCs may be responsible for the perception of odour intensity from building products.

Air Pollution, Indoor↗

Effects of airborne volatile organic compounds on plants.

Routine measurements of volatile organic compounds (VOCs) in air have shown that average concentrations are very much smaller than those used in laboratory experiments designed to study the effects of VOCs on plants. However, maximum hourly concentrations of some VOCs can be 100 times larger than the average, even in rural air. Experimental studies have rarely extended for longer than a few days, so there is little information on potential long-term effects of exposure to small concentrations. This review considers the available evidence for long-term effects, based on laboratory and field data. Previous reviews of the literature from Germany and the USA are cited, prior to an assessment of the effects of individual VOCs. Although hydrocarbons from vehicle exhausts have been implicated in the observed effects on roadside vegetation, the evidence suggests that it is the nitrogen oxides in the exhaust gases that are mostly responsible. There is evidence that aromatic hydrocarbons can be metabolised in plants, although the fate of the metabolites is not known. There is a large literature on the effects of ethylene, because of its role as a plant hormone. Effects have been reported in the field, in response to industrial emissions, and dose-response experiments over several weeks in laboratory studies have clearly identified the potential for effects at ambient concentrations. The main responses are morphological (e.g. epinasty), which may be reversible, and on the development of flowers and fruit. Effects on seed production may be positive or negative, depending on the exposure concentration. Chlorinated hydrocarbons have been identified as potentially harmful to vegetation, but only one long-term experiment has studied dose-response relationships. As for ethylene, the most sensitive indication of effect was on seed production, although long-term accumulation of trichloroacetic acid in tissue may also be a problem. There is little evidence of the direct effects of oxygenated hydrocarbons on plants. Plants are a significant emission source of short-chain alcohols, aldehydes and ketones. Peroxyacetyl nitrate (PAN) has a well-documented history as damaging to vegetation. There have been few long-term experimental studies despite the field evidence for damaging effects. Early studies in California have been followed by more recent data from east Asia, but there is still a dearth of information on the potential for effects of PAN and related peroxyacyl nitrates on vegetation typical of regions around tropical and sub-tropical cities where PAN pollution is increasingly important. The lack of long-term measurements, coupled with the available evidence that effects are not linearly related to 'dose' measured as the product of exposure concentration and time, means that the possibility of adverse effects of VOCs on vegetation cannot be safely rejected, particularly in urban and industrial areas. Although reproductive processes (flowering, seed production) appear to be most sensitive, there have been no experimental studies on subsequent seed viability and the consequences at the ecosystem level of changes to plant phenology. The potential for VOC metabolites to accumulate in plant tissue has been demonstrated, but any subsequent effects on herbivores and phytophagous insects have yet to be investigated.

Air Pollutants↗

Levels and sources of personal inhalation exposure to volatile organic compounds.

Personal exposures to VOCs of 12 urban dwellers were measured directly via personal monitoring and indirectly via static monitoring combined with personal activity diaries. Over 5-10 days, day-to-day variations in personal exposures of individuals were substantial, with statistically significant (p<0.05) deviation from the normal distribution observed for daily exposures to one or more VOCs for several subjects. Daytime concentrations generally exceeded night time, with day:night mean concentration ratios for each sampling day >1 for most VOCs, with the maximum (3.85) occurring for 1,3-butadiene. Exposure in the home contributed 50-80% of overall individual exposure to 1,3-butadiene and benzene. For most VOCs, while absolute values of direct and indirect exposure estimates were significantly different (p<0.05), linear regression of direct and indirect exposure estimates revealed statistically significant correlation (p<0.01), confirming previous observations that indirect monitoring can provide satisfactory estimates of personal inhalation exposure to VOCs. ETS, the use of vehicles, and heating (but not cooking) all made appreciable contributions to personal exposure to all target VOCs.

Air Pollutants↗

Use of chloroflurocarbons as internal standards for the measurement of atmospheric non-methane volatile organic compounds sampled onto solid adsorbent cartridges.

Solid adsorbents have proven useful for determining the vertical profiles of volatile organic compounds (VOCs) using sampling platforms such as balloons, kites, and light aircraft, and those profiles provide valuable information about the sources, sinks, transformations, and transport of atmospheric VOCs. One of the largest contributions to error in VOC concentrations is the estimation of the volume of air sampled on the adsorbent cartridge. These errors arise from different sources, such as variations in pumping flow rates from changes in ambient temperature and pressure with altitude, and decrease in the sampling pump battery power. Another significant source for sampling rate variations are differences in the flow resistance of individual sampling cartridges. To improve the accuracy and precision of VOC measurements, the use of ambient chlorofluorocarbons (CFCs) as internal standards was investigated. A multibed solid adsorbent, AirToxic (Supelco), was chosen for its wide sampling range (C3-C12). Analysis was accomplished by thermal desorption and dual detection GC/FID/ECD, resulting in sensitive and selective detection of both VOCs and CFCs in the same sample. Long-lived chlorinated compounds (CFC-11, CFC-12, CFC-113, CCl4 and CH3CCl3) banned by the Montreal Protocol and subsequent amendments were studied for their ability to predict sample volumes using both ground-based and vertical profiling platforms through the boundary layer and free troposphere. Of these compounds, CFC-113 and CCl4 were found to yield the greatest accuracy and precision for sampling volume determination. Use of ambient CFC-113 and CCl4 as internal standards resulted in accuracy and precision of generally better than 10% for the prediction of sample volumes in ground-, balloon-, and aircraft-based measurements. Consequently, use of CFCs as reference compounds can yield a significant improvement of accuracy and precision for ambient VOC measurements in situations where accurate flow control is troublesome.

Adsorption↗

Full-scale chamber investigation and simulation of air freshener emissions in the presence of ozone.

Volatile organic compound (VOC) emissions from one electrical plug-in type of pine-scented air freshener and their reactions with O3 were investigated in the U.S. Environmental Protection Agency indoor air research large chamber facility. Ozone was generated from a device marketed as an ozone generator air cleaner. Ozone and oxides of nitrogen concentrations and chamber conditions such as temperature, relative humidity, pressure, and air exchange rate were controlled and/or monitored. VOC emissions and some of the reaction products were identified and quantified. Source emission models were developed to predict the time/concentration profiles of the major VOCs (limonene, alpha-pinene, beta-pinene, 3-carene, camphene, benzyl propionate, benzyl alcohol, bornyl acetate, isobornyl acetate, and benzaldehyde) emitted bythe air freshener. Gas-phase reactions of VOCs from the air freshener with O3 were simulated by a photochemical kinetics simulation system using VOC reaction mechanisms and rate constants adopted from the literature. The concentration-time predictions were in good agreement with the data for O3 and VOCs emitted from the air freshener and with some of the primary reaction products. Systematic differences between the predictions and the experimental results were found for some species. Poor understanding of secondary reactions and heterogeneous chemistry in the chamber is the likely cause of these differences. The method has the potential to provide data to predict the impact of O3/VOC interactions on indoor air quality.

Air Pollution, Indoor↗

Secondary organic aerosol production from terpene ozonolysis. 2. Effect of NOx concentration.

We report secondary organic aerosol (SOA) yields from the ozonolysis of alpha-pinene in the presence of NO and NO2. Experimental conditions are characterized by the [VOC]0/ [NOx]0 ratio (ppbC/ppb), which varies from approximately 1 to approximately 300. SOA yield is constant for [VOC]0/[NOx]0 > approximately 15 and decreases dramatically (by more than a factor of 4) as [VOC]0/[NOx]0 decreases. Aerosol production is completely suppressed in the presence of NO for [VOC]0/[NOx]0 < or = 4.5. Fouriertransform IR analysis of filter samples reveals that nitrate-containing species contribute significantly to the total aerosol mass at low [VOC]0/[NOx]0. Yield reduction is a result of the formation of a more volatile product distribution as [VOC]0/[NOx]0 decreases; we propose that the change in the product distribution is driven by changes in the gas-phase chemistry as NOx concentration increases. We also present two-product model parameters to describe aerosol production from the alpha-pinene/0/NOx system under both high- and low-NOx conditions.

Aerosols↗

The use of isotopes to identify landfill gas effects on groundwater.

An evaluation of the source of volatile organic compounds in groundwater samples was performed at a landfill in southern California. The 3H (tritium) content of the water in leachate and water from the gas-collection system (condensed water and entrained water droplets) and the delta 13C and 14C content of the inorganic carbon in landfill gas CO2, leachate, and gas-collection system water were used to characterize the dissolved inorganic carbon (DIC) inside the landfill, while the same parameters were monitored in groundwater samples from affected monitoring wells and an unaffected well. Tritium levels from leachate and gas-collection system condensate ranged from approximately 2000 TU to over 4000 TU, orders of magnitude higher than unaffected groundwater. The average 14C content of DIC in the landfill pore-water samples was 121 pMC and the 14C content of unaffected groundwater DIC was 93 pMC, while the 14C content of the dissolved inorganic carbon in groundwater with VOC detections ranged from 105 to 119 pMC. The delta 13C of DIC in pore water was consistently above 0 per thousand and the delta 13C of unaffected groundwater DIC was -20.3 per thousand, while the delta 13C of DIC in affected groundwater samples was increased from -17.3 to -13.2 per thousand. The increases in both delta 13C and 14C in landfill gas-impacted groundwater DIC generally correlated with the number of volatile organic compounds detected and their concentrations. Based on the tritium and DIC 14C levels in leachate and water from the gas-collection system compared to those of unaffected water, significant increases in the tritium content of the water would be expected to accompany VOC detections and increases in delta 13C and 14C caused by landfill water. The results rule out landfill water as the VOC source, leaving landfill gas as the source. The identities and concentrations of the specific VOCs in affected groundwater samples varied among wells as well as between two leachate samples, ruling out the use of a VOC "fingerprint" for leachate or landfill gas to be compared to groundwater VOC concentrations.

Carbon Isotopes↗

Background concentrations of individual and total volatile organic compounds in residential indoor air of Schleswig-Holstein, Germany.

During a monitoring campaign concentrations of volatile organic compounds (VOCs) were measured in indoor air of 79 dwellings where occupants had not complained about health problems or unpleasant odour. Parameters monitored were the individual concentration of 68 VOCs and the total concentration of all VOCs inside the room. VOCs adsorbed by Tenax TA were then analysed by means of thermal desorption, gas chromatography and mass spectrometry. The analytical procedure and quantification was done according to the recommendation of the ECA-IAQ Working Group 13 which gave a definition of the total volatile organic compound (TVOC) concentration. Using this recommendation TVOC-concentrations ranged between 33 and 1600 microg m(-3) with a median of 289 microg m(-3). Compounds found in every sample and with the highest concentrations were 2-propanol, alpha-pinene and toluene. Save for a few samples, all concentrations measured have been a factor 2 to 10 lower, compared to data from similar studies. Only a few terpenes and aldehydes were found exceeding published reference data or odour threshold concentrations. However, it has been found that sampling and analysing methods do have a considerable impact on the results, making direct comparisons of studies somewhat questionable. 47% of all samples revealed concentrations exceeding the threshold value of 300 microg TVOC m(-3) set by the German Federal Environmental Agency as a target for indoor air quality. Using the TVOC concentration as defined in the ECA-IAQ methodology is instrumental in assessing exposure to VOCs and identifying sources of VOCs. The background concentrations determined in this study can be used to discuss and interpret target values for individual and total volatile organic compounds in indoor air.

Air Pollution, Indoor↗

Measurements of biogenic hydrocarbons and carbonyl compounds emitted by trees from temperate warm Atlantic rainforest, Brazil.

This study is part of a three-year project on biogenic volatile organic compound (VOC) emissions from trees of the temperate warm Atlantic rainforest found in the metropolitan area of Sao Paulo City (MASP). No study of VOC emission rates from plant species has been carried out in the temperate warm Atlantic rainforest of Brazil prior to this work. Eleven species were selected (Alchornea sidifolia, Cupania oblongifolia, Cecropia pachystachia, Syagrus romanzoffiana, Casearia sylvestris, Machaerium villosum, Trema micrantha, Croton floribundus, Myrcia rostrata, Solanum erianthum and Ficus insipida) and some of them were studied in urban, sub-urban and forest areas inside the MASP in order to evaluate biogenic VOC composition at sites characterized by different emission sources. Biogenic VOC emissions were determined by placing branches of plants in a dynamic enclosure system, an all-Teflon cuvette, and by sampling the compounds in the air leaving the cuvette. Pre-concentration using adsorbents to retain the VOC, followed by GC-MS after thermal desorption of the sample, was employed to determine the amount of biogenic hydrocarbons. The collection of carbonyl compounds on a 2,4-dinitrophenylhydrazine coated silica followed by HPLC-UV was used to analyze low molecular weight carbonyl compounds. Emission rates of isoprene, alpha-pinene, camphene and limonene ranged from 0.01 to 2.16 microg C h(-1) g(-1) and emission rates of aldehydes (C(2)-C(6)), acrolein, methacrolein and 2-butanone ranged from 1.5 x 10(-2) to 2.3 micro g C h(-1) g (-1). Ambient and leaf temperatures, relative humidity, light intensity, O(3) and NO(x) levels in the local atmosphere were monitored during experiments. It was possible to identify different biogenic VOCs emitted from typical plants of temperate warm Atlantic rainforest. The emission rates were reported as a function of the type of site investigated and were only provided for compounds for which quantification was feasible. Other biogenic compounds were only identified.

Brazil↗

Plasma levels of TNF-alpha in sickle cell patients receiving hydroxyurea.

Hydroxyurea (HU), a chemotherapeutic agent, used increasingly in the treatment of sickle cell disease (SCD) stimulates the release of a tumor necrosis factor (TNF-alpha) from human macrophages in vitro and the concentration of TNF-alpha is greater than normal in subjects affected by SCD. It is widely accepted that HU may inhibit vaso-occlusive crisis (VOC) by stimulating the production of fetal hemoglobin (HbF) and nitric oxide (NO) in SCD; however, the beneficial effects of HU in vivo may be counteracted by the release of TNF-alpha and, in turn, the expression of a vascular cell adhesion molecule (VCAM-1) on leukocytes. Previous studies have shown that the severity of SCD increases with the leukocyte count. Therefore, we examined the relationship between plasma levels of TNF-alpha and HbF in SCD patients during steady-state (StSt) conditions (in the absence of VOC) and during VOC conditions after the acute administration of HU. Venous blood was collected in SCD patients over 6 h after administering a single dose of HU. Plasma TNF-alpha was found to be greater in SCD subjects than in reported normal adult controls (p<0.05). TNF-alpha in the StSt group was not significantly different than in the VOC group; however, the plasma TNF-alpha tended to greater in the VOC group (p>0.1). An increase in the HbF concentration after acute administration of HU (p<0.01) was not associated with a significant change in plasma TNF-alpha (p>0.1). Contrary to the results of in vitro studies, HU did not increase the plasma concentration of TNF-alpha. These findings suggest that a HU-induced increase in TNF-alpha does not contribute to VOC and sickle cell patients can be counseled that the HU-induced increase in TNF-alpha does not counteract the beneficial effects of HU in SCD.

Adolescent↗

Assessing ozone-precursor relationships based on a smog production model and ambient data.

A semi-empirical model, Johnson's smog production model (SPM), which relates precursor emissions to ozone levels and estimates the relative effectiveness of volatile organic compounds (VOC) and NOx emission controls, has been evaluated and a modified version of SPM has been introduced. Both versions have been applied to routine data from 1989-1991 in five areas in the United States. In particular, extent parameters, which reveal the relative merit of VOC and NOx controls in reducing high ozone levels, have been calculated. Preliminary applications of SPM reveal interesting features with respect to VOC vs. NOx controls in reducing high ozone levels. For hourly data with ozone > or =0.08 ppm, distributions of extent parameters resulting from the modified SPM show the effectiveness of VOC controls at more monitoring sites than those from Johnson's SPM; however, relative features between the two versions are similar. On the other hand, for hourly data with ozone > or =0.12 ppm, the two SPM versions show very similar relative effectiveness of VOC and NOx controls with chosen values of model parameters. To improve the credibility of SPM, the range of validity of relationships between maximum smog produced or maximum ozone and NOx concentrations must be determined, and the parameters in these relationships must be better determined for typical VOC mixtures. Another essential parameter, which determines the fractional loss of NOy (NO and its oxidation products) from the gas phase must be better determined.

Air Pollutants↗

Biofiltration of high loads of ethyl acetate in the presence of toluene.

To date, biofilters have been used primarily to control dilute, usually odorous, off-gases with relatively low volatile organic compound (VOC) concentrations (< 1 g m-3) and VOC loads (< 50 g m-3 hr-1). Recently, however, U.S. industry has shown an interest in applying biofilters to higher concentrations of VOCs and hazardous air pollutants (HAPs). In this study, the behavior of biofilters under high loads of binary VOC mixtures was studied. Two bench-scale biofilters were operated using a commercially available medium and a mixture of wood chips and compost. Both were exposed to varying mixtures of ethyl acetate and toluene. Concentration profiles and the corresponding removal efficiencies as a function of VOC loading were determined through frequent grab-sampling and GC analysis. Biofilter response to two frequently encountered operating problems--media dry-out and operating temperatures exceeding 40 degrees C--was also evaluated under controlled conditions. Microbial populations were also monitored to confirm the presence of organisms capable of degrading both major off-gas constituents. The results demonstrated several characteristics of biofilters operating under high VOC load conditions. Maximum elimination capacities for ethyl acetate were typically in the range of 200 g m-3 hr-1. Despite the presence of toluene degraders, the removal of toluene was inhibited by high loads of ethyl acetate. Several byproducts, particularly ethanol, were formed. Short-term dry-out and temperature excursions resulted in reduced performance.

Acetates↗

Kinetics of catalytic oxidation of benzene, n-hexane, and emission gas from a refinery oil/water separator over a chromium oxide catalyst.

With the advances made in the past decade, catalytic incineration of volatile organic compounds (VOCs) has become the technology of choice in a wide range of pollution abatement strategies. In this study, a test was undertaken for the catalytic incineration, over a chromium oxide (Cr2O3) catalyst, of n-hexane, benzene, and an emission air/vapor mixture collected from an oil/water separator of a refinery. Reactions were carried out by controlling the feed stream to constant VOC concentrations and temperatures, in the ranges of 1300-14,700 mg/m3 and 240-400 degrees C, respectively. The destruction efficiency for each of the three VOCs as a function of influent gas temperature and empty bed gas residence time was obtained. Results indicate that n-hexane and the oil vapor with a composition of straight- and branch-chain aliphatic hydrocarbons exhibited similar catalytic incineration effects, while benzene required a higher incineration temperature or longer gas retention time to achieve comparable results. In the range of the VOC concentrations studied, at a given gas residence time, increasing the operating temperature of the catalyst bed increased the destruction efficiency. However, the much higher temperatures required for a destruction efficiency of over 99% may be not cost-effective and are not suggested. A first-order kinetics with respect to VOC concentration and an Arrhenius temperature dependence of the kinetic constant appeared to be an adequate representation for the catalytic oxidation of these volatile organics. Activation energy and kinetic constants were estimated for each of the VOCs. Low-temperature destruction of the target volatile organics could be achieved by using the Cr2O3 catalyst.

Air Pollutants, Occupational↗

Measuring concentrations of volatile organic compounds in vinyl flooring.

The initial solid-phase concentration of volatile organic compounds (VOCs) is a key parameter influencing the emission characteristics of many indoor materials. Solid-phase measurements are typically made using solvent extraction or thermal headspace analysis. The high temperatures and chemical solvents associated with these methods can modify the physical structure of polymeric materials and, consequently, affect mass transfer characteristics. To measure solid-phase concentrations under conditions resembling those in which the material would be installed in an indoor environment, a new technique was developed for measuring VOC concentrations in vinyl flooring (VF) and similar materials. A 0.09-m2 section of new VF was punched randomly to produce -200 0.78-cm2 disks. The disks were milled to a powder at -140 degrees C to simultaneously homogenize the material and reduce the diffusion path length without loss of VOCs. VOCs were extracted from the VF particles at room temperature by fluidized-bed desorption (FBD) and by direct thermal desorption (DTD) at elevated temperatures. The VOCs in the extraction gas from FBD and DTD were collected on sorbent tubes and analyzed by gas chromatography/mass spectrometry (GC/MS). Seven VOCs emitted by VF were quantified. Concentration measurements by FBD ranged from 5.1 microg/g VF for n-hexadecane to 130 microg/g VF for phenol. Concentrations measured by DTD were higher than concentrations measured by FBD. Differences between FBD and DTD results may be explained using free-volume and dual-mobility sorption theory, but further research is necessary to more completely characterize the complex nature of a diffusant in a polymer matrix.

Air Pollution, Indoor↗

A new method for the rapid determination of volatile organic compound breakthrough times for a sorbent at concentrations relevant to indoor air quality.

The use of sorbents has been proposed to remove volatile organic compounds (VOCs) present in ambient air at concentrations in the parts-per-billion (ppb) range, which is typical of indoor air quality applications. Sorbent materials, such as granular activated carbon and molecular sieves, are used to remove VOCs from gas streams in industrial applications, where VOC concentrations are typically in the parts-per-million range. A method for evaluating the VOC removal performance of sorbent materials using toluene concentrations in the ppb range is described. Breakthrough times for toluene at concentrations from 2 to 7500 ppb are presented for a hydrophobic molecular sieve at 25%) relative humidity. By increasing the ratio of challenge gas flow rate to the mass of the sorbent bed and decreasing both the mass of sorbent in the bed and the sorbent particle size, this method reduces the required experimental times by a factor of up to several hundred compared with the proposed American Society of Heating, Refrigerating, and Air-Conditioning Engineers method, ASHRAE 145P, making sorbent performance evaluation for ppb-range VOC removal more convenient. The method can be applied to screen sorbent materials for application in the removal of VOCs from indoor air.

Adsorption↗

Effect of substrate Henry's constant on biofilter performance.

Butanol, ether, toluene, and hexane, which have Henry's constants ranging from 0.0005 to 53, were used to investigate the effects of substrate solubility or availability on the removal of volatile organic compounds (VOCs) in trickle-bed biofilters. Results from this study suggest that, although removal of a VOC generally increases with a decrease in its Henry's constant, an optimal Henry's constant range for biofiltration may exist. For the treatment of VOCs with high Henry's constant values, such as hexane and toluene, the transfer of VOCs between the vapor and liquid phases or between the vapor phase and the biofilm is a rate-determining step. However, oxygen (O2) transfer may become a rate-limiting step in treating VOCs with low Henry's constants, such as butanol, especially at high organic loadings. The results demonstrated that in a gas-phase aerobic biofilter, nitrate can serve both as a growth-controlling nutrient and as an electron acceptor in a biofilm for the respiration of VOCs with low Henry's constants. Microbial communities within the biofilters were examined using denaturing gradient gel electrophoresis to provide a more complete picture of the effect of O2 limitation and denitrification on biofilter performance.

Air Pollution↗