Search PubMed⌕ Search

SEARCH · Search PubMed

Results for “Nanoparticles”

Search indexed PubMed citations on genomics, clinical trials, systematic reviews and public health. Explore titles, authors and supplied subject terms, then open the PubMed record.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 343 records · Page 19Linked to original sources

In vitro release and stereoselective disposition of flurbiprofen loaded to poly(D,L-lactide- co-glycolide) nanoparticles in rats.

Flurbiprofen (FL) is a chiral 2-arylpropionate used clinically as the racemate (rac-FL). This study was undertaken to investigate the influence of sustained release formulation on the pharmacokinetics of flurbiprofen enantiomers (-) -R-FL and (+)-S-FL. Therefore, a stereoselective high-performance liquid chromatographic (HPLC) method was developed and validated for the rapid, quantitative determination of (-)-R-FL and (+)-S-FL in rat plasma. Flurbiprofen-loaded poly(D,L-lactide-co-glycolide) nanoparticles (rac-FL-PLGA) were prepared by in emulsion-solvent evaporation technique. Optimum conditions for rac-FL-PLGA nanoparticle preparation were considered, and the in vitro release of rac-FL, R-FL, and S-FL were followed up to 48 h in phosphate buffer (pH 7.4). The three tested formulations revealed approximately zero-order release of either (-)-R-FL or S-FL up to 24 h with r >/= 0.97.Surprisingly, there was no significant difference between t(50%) of the three formulations (21.6 +/- 1.1 h). The stereoselective disposition of the sustained release rac-FL deliverv system was investigated in rats. There was a rapid release of R-FL, S-FL, or rac-FL followed by a slower one and C(max) values were observed after 2.5 +/- 2.5, 8.3 +/- 3.4 and 8.86 +/- 3.6 h of (-)-R-FL, (+)-S-FL, and rac-FL, respectively, after nanoparticle administration. PLGA nanoparticles increased the mean retention time (MRT) of S-FL by 2.7-fold, from 6.8 to 16.3 h, compared to rac-FL. Although the dose of rac-FL-PLGA nanoparticles was only 2.5 times higher than that of the drug in the suspension, the mean (+)-S-FL concentration after 12 h was 3.4 times higher in the case of nanoparticles than after the free form, 10.35 +/- 1.6 and 3.04 +/- 1.1 mg/l, respectively. The area under the concentration-time curve (AUC) values of (+)-S-FL and rac-FL were about 2.5-fold higher after the nanoparticles compared to suspension, while the AUC of the (-)-R-FL was about 3.5 times higher. This difference may indicate that the two enantiomers have different absorption kinetics. The present study provides evidence that the sorption of racemic flurbiprofen to PLGA nanoparticles was successful in maintaining (at least up to 12 h) elevated plasma drug concentrations of (+)-S-FL in rats. Chirality 16:119-125, 2004.

Animals↗

Biodegradable nanoparticles containing protein-fatty acid complexes for oral delivery of salmon calcitonin.

Biodegradable nanoparticles containing salmon calcitonin (sCT) were formulated using protein-fatty acid complexes, and their in vitro transport against a Caco-2 cell monolayer and the extent of in vivo oral uptake were assessed. Positively charged sCT was hydrophobically ion paired to form physical complexes with fatty acid, phospholipid, and surfactant. Among the complexes, sodium oleate was used to form sCT-oleate complexes, which were characterized and formulated into biodegradable poly(lactic-co-glycolic acid) (PLGA) nanoparticles. Endocytosis of sCT nanoparticles by Caco-2 cells was studied by flow cytometry. Transcytosis of sCT across the Caco-2 monolayer was also quantitated by an ELISA method. The sCT nanoparticles were orally administered to Sprague-Dawley rats, and serum sCT was monitored. Biodegradable polymeric nanoparticles containing a loading amount of sCT as high as 2.7% (w/w) were prepared based on the complexation of sCT with sodium oleate. A greater amount of sCT nanoparticles could be delivered into Caco-2 cells compared with free sCT, and sCT could also be transported from the apical side to the basolateral side of the Caco-2 monolayer. In vivo experiments using a rat animal model showed the possibility of oral uptake of sCT. This study showed that physical complexation of sCT with amphiphilic molecules enabled the formation of sCT-loaded PLGA nanoparticles at a high loading efficiency and that sCT-PLGA nanoparticles were transported across the Caco-2 cell monolayer and were readily taken up in vivo following oral admistration.

Animals↗

Alkylthiol gold nanoparticles in sol-gel-based open tubular capillary electrochromatography.

A novel open-tubular capillary electrochromatography (OTCEC) column was prepared by immobilizing dodecanethiol gold nanoparticles on prederivatised fused-silica capillary columns with sol-gel technology. 3-Mercaptopropyl-trimethoxysilane (MPTMS) was selected as sol-gel precursor to develop a sol-gel layer on the inner wall of the capillary, prior to assembly of dodecanethiol gold nanoparticles onto the generated sol-gel layer through specific interaction between the gold nanoparticles and surface terminating thiol groups. The electrochromatographic behaviour of the sol-gel gold nanoparticle capillary was compared with a gold nanoparticle capillary prepared via MPTMS surface functionalisation, through variation of the percentage of the organic modifier, pH, and separation voltage. Efficient separation for a "reversed-phase" test mixture of thiourea, naphthalene, and biphenyl and for selected polycyclic aromatic hydrocarbons (PAHs) was obtained on the sol-gel based gold nanoparticle capillaries. OTCEC separations of three selected drug substances (propiophenone, benzoin, and warfarin) were also demonstrated. Scanning electron microscopy was used for the characterization of the sol-gel gold nanoparticle capillary surface. The results confirm that dodecanethiol gold nanoparticles, bound on the sol-gel-based inner layer of fused-silica capillary, can provide sufficient solute-bonded phase interactions for OTCEC with reproducible retention as well as characteristic reversed-phase behaviour.

Journal Article↗

Microstructure formation and property of chitosan-poly(acrylic acid) nanoparticles prepared by macromolecular complex.

We report here a study on the microstructure formation process of polymeric nanoparticles based on polyelectrolyte complexes. When polyanion poly(acrylic acid) (PAA) was dropped into polycation chitosan (CS) solution, CS-PAA nanoparticles with diverse microstructure would be formed under different experimental conditions. The microstructure of CS-PAA nanoparticles changed from solid spherical nanoparticles to core-shell separative ones and turned back to solid spherical ones with the variation of preparation conditions. The influence of molecular weight of CS and PAA, shell cross-linking, dropping temperature on the size, stability and morphology of CS-PAA nanoparticles were also studied. The nanoparticle size was affected by the molecular weight of CS and PAA, the ratio of amino group to carboxyl group (na/nc) and the incubation temperature as well. The shell-cross-linking provides a means to stabilize these nanoparticles. These nanoparticles can encapsulate plasmid DNA very well, which makes them have great potential in gene delivery.

Acrylates↗

Use of PEI-coated magnetic iron oxide nanoparticles as gene vectors.

To evaluate the feasibility of using polyethyleneimine (PEI) coated magnetic iron.oxide nanoparticles (polyMAG-1000) as gene vectors. The surface characteristics of the nanoparticles were observed with scanning electron microscopy. The ability of the nanoparticles to combine with and protect DNA was investigated at different PH values after polyMAG-1000 and DNA were combined in different ratios. The nanoparticles were tested as gene vectors with in vitro transfection models. Under the scanning electron microscope the nanoparticles were about 100 nm in diameter. The nanoparticles could bind and condense DNA under acid, neutral and alkaline conditions, and they could transfer genes into cells and express green fluorescent proteins (GFP). The transfection efficiency was highest (51%) when the ratio of nanoparticles to DNA was 1:1 (v:w). In that ratio, the difference in transfection efficiency was marked depending on whether a magnetic field was present or not: about 10% when it was absent but 51% when it was present. The magnetic iron oxide nanoparticles coated with PEI may potentially be used as gene vectors.

Breast Neoplasms↗

Glucose oxidase-magnetite nanoparticle bioconjugate for glucose sensing.

Immobilization of bioactive molecules on the surface of magnetic nanoparticles is of great interest, because the magnetic properties of these bioconjugates promise to greatly improve the delivery and recovery of biomolecules in biomedical applications. Here we present the preparation and functionalization of magnetite (Fe3O4) nanoparticles 20 nm in diameter and the successful covalent conjugation of the enzyme glucose oxidase to the amino-modified nanoparticle surface. Functionalization of the magnetic nanoparticle surface with amino groups greatly increased the amount and activity of the immobilized enzyme compared with immobilization procedures involving physical adsorption. The enzymatic activity of the glucose oxidase-coated magnetic nanoparticles was investigated by monitoring oxygen consumption during the enzymatic oxidation of glucose using a ruthenium phenanthroline fluorescent complex for oxygen sensing. The glucose oxidase-coated magnetite nanoparticles could function as nanometric glucose sensors in glucose solutions of concentrations up to 20 mmol L(-1). Immobilization of glucose oxidase on the nanoparticles also increased the stability of the enzyme. When stored at 4 degrees C the nanoparticle suspensions maintained their bioactivity for up to 3 months.

Amides↗

Preparation, characterization and application of fluorescent terbium complex-doped zirconia nanoparticles.

Novel zirconia-based fluorescent terbium nanoparticles have been prepared as a fluorescent nanoprobe for time-resolved fluorescence bioassay. The nanoparticles were prepared in a water-in-oil (W/O) microemulsion consisting of a strongly fluorescent Tb(3+) complex, N,N,N(1), N(1)-[2,6-bis(3'-aminomethyl-1'-pyrazolyl)-phenylpyridine]tetrakis(acetate)-Tb(3+)(BPTA-Tb(3+)), Triton X-100, hexanol, and cyclohexane by controlling co-condensation of Zr(OCH(2)CH(3))(4) and ZrOCl(2.) The characterizations by transmission electron microscopy and fluorometric methods indicate that the nanoparticles are uniform in size, 33+/- 4 nm in diameter, and have a fluorescence quantum yield of 8.9% and a long fluorescence lifetime of 2.0 ms. The zirconia-based fluorescent terbium nanoparticles show high stability against basic dissolution in a high pH aqueous buffer compared to the silica-based nanoparticles. A surface modification and bio-conjugation method for the fluorescent nanoparticles was developed, and the nanoparticle-conjugated streptavidin (SA) was used for time-resolved floro-immunoassy (TR-FIA) of human prostate specific antigen (PSA). The result shows that the zirconia-based fluorescent terbium nanoparticles are useful as a fluorescent nanoprobe for time-resolved fluorescence bioassay.

Fluorescence↗

Tumor-targeted gene delivery using poly(ethylene glycol)-modified gelatin nanoparticles: in vitro and in vivo studies.

PURPOSE: To develop safe and effective systemically administered nonviral gene therapy vectors for solid tumors, DNA-containing poly(ethylene glycol)-modified (PEGylated) gelatin nanoparticles were fabricated and evaluated in vitro and in vivo. METHODS: Reporter plasmid DNA encoding for beta-galactosidase (pCMV-beta) was encapsulated in gelatin and PEGylated gelatin nanoparticles using a water-ethanol solvent displacement method under controlled pH and temperature. Lewis lung carcinoma (LLC) cells in culture were transfected with the pCMV-beta in the control and nanoparticle formulations. Periodically, the expression of beta-galactosidase in the cells was measured quantitatively using an enzymatic assay for the conversion of o-nitrophenyl-beta-D: -galactopyranoside (ONPG) to o-nitrophenol (ONP). Qualitative expression of beta-galactosidase in LLC cells was observed by staining with 5-bromo-4-chloro-3-indolyl-beta-D: -galactopyranoside (X-gal). Additionally, the plasmid DNA-encapsulated gelatin and PEGylated gelatin nanoparticles were administered intravenously (i.v.) and intratumorally (i.t.) to LLC-bearing female C57BL/6J mice. At various time points postadministration, the animals were sacrificed and transgene expression in the tumor and liver was determined quantitatively by the ONPG to ONP enzymatic conversion assay and qualitatively by X-gal staining. RESULTS: Almost 100% of the pCMV-beta was encapsulated in gelatin and PEGylated gelatin nanoparticles (mean diameter 200 nm) at 0.5% (w/w) concentration. PEGylated gelatin nanoparticles efficiently transfected the LLC cells and the beta-galactosidase expression, as measured by the ONPG to ONP enzymatic conversion assay at 420 nm absorbance, increased starting from 12 h until 96 h post-transfection. The efficient expression of LLC cells was also evident by the X-gal staining method that shows blue color formation. The in vivo studies showed significant expression of beta-galactosidase in the tumor following administration of DNA-containing PEGylated gelatin nanoparticles to LLC-bearing mice by both i.v. and i.t. routes. Following i.v. administration of pCMV-beta in PEGylated gelatin nanoparticles, for instance, the absorbance at 420 nm per gram of tumor increased from 0.60 after 12 h to 0.85 after 96 h of transfection. After i.t. administration, the absorbance values increased from 0.90 after 12 h to almost 1.4 after 96 h. CONCLUSIONS: The in vitro and in vivo results of this study clearly show that a long-circulating, biocompatible and biodegradable, DNA-encapsulating nanoparticulate system would be highly desirable for systemic delivery of genetic constructs to solid tumors.

Animals↗

Comparison of diafiltration and tangential flow filtration for purification of nanoparticle suspensions.

PURPOSE: The study reports evaluation of different purification processes for removing surplus surfactant and formulating stable nanoparticle dispersions. METHODS: Nanoparticle formulations prepared from poly(D,L-lactide-co-glycolide) and polyvinyl alcohol (PVA) were purified by a diafiltration centrifugal device (DCD), using 300K and 100K molecular weight cut-off (MWCO) membranes and a tangential flow filtration (TFF) system with a 300K MWCO membrane. The effects of process parameters including MWCO, transmembrane pressure (TMP), and mode of TFF on nanoparticle purification were evaluated, and two purification techniques were compared to the commonly used ultracentrifugation technique. RESULTS: Both DCD and TFF systems (concentration mode at TMP of 10 psi) with 300K MWCO membrane removed maximal percent PVA from nanoparticle dispersions (89.0 and 90.7%, respectively). T90, the time taken to remove 90% of PVA in 200-ml sample, however, was considerably different (9.6 and 2.8 h, respectively). Purified nanoparticle dispersions were stable and free of aggregation at ambient conditions over 3 days. This is in contrast to the ultracentrifugation technique, which, although it can yield a highly purified sample, suffers from drawbacks of a level of irreversible nanoparticle aggregation and loss of fine particles in the supernatant during centrifugation. CONCLUSIONS: The TFF, in concentration mode at TMP of 10 psi, is a relatively quick, efficient, and cost-effective technique for purification and concentration of a large nanoparticle batch (>or=200 ml). The DCD technique can be an alternative purification method for nanoparticle dispersions of small volumes.

Adsorption↗

Self-assembled biodegradable nanoparticles developed by direct dialysis for the delivery of paclitaxel.

PURPOSE: The main objective of this study was to obtain self-assembled biodegradable nanoparticles by a direct dialysis method for the delivery of anticancer drug. The in vitro cellular particle uptake and cytotoxicity to C6 glioma cell line were investigated. METHODS: Self-assembled anticancer drugs--paclitaxel-loaded poly(D,L-lactic-co-glycolic acid) (PLGA) and poly(L-lactic acid) (PLA) nanoparticles--were achieved by direct dialysis. The physical and chemical properties of nanoparticles were characterized by various state-of-the-art techniques. The encapsulation efficiency and in vitro release profile were measured by high-performance liquid chromatography. Particle cellular uptake was studied using confocal microscopy, microplate reader, and flow cytometry. In addition, the cytotoxicity of this drug delivery system was evaluated using 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide (MTT) assay on C6 glioma cell line to predict the possible dose response of paclitaxel-loaded PLGA and PLA nanoparticles. RESULTS: PLGA and PLA nanoparticles with or without vitamin E tocopherol polyethylene glycol succinate (TPGS) as an additive were obtained, in which the sustained release of paclitaxel of more than 20 days was achieved. The coumarin6-loaded PLGA and PLA nanoparticles could penetrate the C6 glioma cell membrane and be internalized. The cytotoxicity of paclitaxel-loaded nanoparticles seemed to be higher than that of commercial Taxol after 3 days incubation when paclitaxel concentrations were 10 and 20 microg/ml. CONCLUSIONS: Direct dialysis could be employed to achieve paclitaxel-loaded PLGA and PLA nanoparticles, which could be internalized by C6 glioma cells and enhance the cytotoxicity of paclitaxel because of its penetration to the cytoplasm and sustained release property.

Antineoplastic Agents, Phytogenic↗

Glutamate decarboxylase-derived IDDM autoantigens displayed on self-assembled protein nanoparticles.

The recombinant ferritin heavy chain (FTN-H) formed self-assembled spherical nanoparticles with the size comparable to native one. We tried to express the GAD65 COOH-terminal fragments, i.e., 448-585 (GAD65(448-585)), 487-585 (GAD65(487-585)), and 512-585 (GAD65(512-585)) amino acid fragments, using FTN-H as N-terminus fusion expression partner in Escherichia coli. All of recombinant fusion proteins (FTN-H::GAD65(448-585), FTN-H::GAD65(487-585), and FTN-H::GAD65(512-585)) also formed spherical nanoparticles due probably to the self-assembly function of the fused ferritin heavy chain. The antigenic epitopes within GAD65(448-585), GAD65(487-585), and GAD65(512-585) against insulin-dependent diabetes mellitus (IDDM) marker (autoantibodies against GAD65) were localized at the surface of the spherical protein nanoparticles so that anti-GAD65 Ab could recognize them. Protein nanoparticles like FTN-H seem to provide distinct advantages over other inorganic nanoparticles (e.g., Au, Ag, CdSe, etc.) in that through the bacterial synthesis, the active capture probes can be located at the nanoparticle surface with constant orientation/conformation via covalent cross-linking without complex chemistry. Also it is possible for the protein nanoparticles to have uniform particle size, which is rarely achieved in the chemical synthesis of inorganic nanoparticles. Thus, the recombinant ferritin particles can be used as a three-dimensional (spherical) and nanometer-scale probe structure that is a key component in ultra-sensitive protein chip for detecting protein-small molecule interactions and protein-protein interactions.

Autoantibodies↗

Selective targeting of antibody-conjugated nanoparticles to leukemic cells and primary T-lymphocytes.

In the present study, surface-modified nanoparticles based on biodegradable material were used for antibody coupling in order to get a selective drug carrier systems. Gelatin nanoparticles were prepared by a desolvation process. Sulfhydryl groups were introduced which enabled the linkage of NeutrAvidin (NAv). Antibodies specific for the CD3 antigen on lymphocytic cells were conjugated to the nanoparticles surface. The binding of biotinylated anti-CD3 antibody was achieved by NAv-biotin-complex formation. Cellular binding and uptake were determined by flow cytometry and confocal laser scanning microscopy (CLSM). Cell-type-specific targeting of anti-CD3-conjugated nanoparticles into CD3-positive human T-cell leukemia cells and primary T-lymphocytes could be shown. Celluar uptake and effective internalization of antibody-conjugated nanoparticles into CD3 expressing cells were demonstrated. Uptake rates of about 84% into T-cell leukemia cells were observed. To confirm selectivity of T-cell targeting, competition experiments were carried out adding excessive free anti-CD3 prior to nanoparticle incubation leading to significantly reduced cellular uptake of antibody-conjugated nanoparticles. Further analysis on the mechanism of uptake confirmed a receptor-mediated endocytotic process. Protein-based nanoparticles conjugated with an antibody against a specific cellular antigen hold promise as selective drug delivery systems for specific cell types.

Antibodies↗

Removal of trichloroethylene from water by cellulose acetate supported bimetallic Ni/Fe nanoparticles.

In this study, cellulose acetate (CA) supported Ni/Fe nanoparticles were prepared and the ability of these nanoparticles to remove trichloroethylene (TCE) from water was studied. The effects of TCE reduction by the nanoparticles and sorption by the CA support were accounted for separately in the model. CA supported post-coated Ni/Fe nanoparticles were used to investigate the effect of metal particle composition on the observed reduction rate constant. The results show that the metal mass normalized observed reduction rate constant was proportional to the Ni content in the post-coated Ni/Fe nanoparticles in the range of 0-14.3 wt.%. This constant reached a maximum between 14.3 and 21.4 wt.% and decreased with further increase in Ni content. CA supported co-reduced Ni/Fe bimetallic nanoparticles gave poorer performance compared to CA supported post-coated Ni/Fe bimetallic nanoparticles at the same Ni content in Ni/Fe nanoparticles.

Adsorption↗

Chemical and biological oxidative effects of carbon black nanoparticles.

Several studies show that ultrafine particles have a larger surface area than coarse particles, thus causing a greater inflammatory response. In this study, we investigated chemical and biological oxidative effects of nanoparticles in vitro. Carbon black (CB) nanoparticles with mean aerodynamic diameters of 14, 56, and 95nm were examined. The innate oxidative capacity of the CB nanoparticles was measured by consumption of dithiothreitol (DTT) in cell-free system. The expression of heme oxygenase-1 (HO-1) in rat alveolar type II epithelial cell line (SV40T2) and alveolar macrophages (AM) exposed to CB nanoparticles was measured by ELISA. DTT consumption of 14nm CB was higher than that of other CB nanoparticles having the same particle weight. However, DTT consumption was directly proportional to the particle surface area. HO-1 protein in SV40T2 cells was significantly increased by the 14nm and 56nm CB, however, 95nm CB did not affect. HO-1 protein in AM was significantly increased by the 14, 56, and 95nm CB. The increase in HO-1 expression was diminished by N-acetyl-l-cysteine (NAC) treatment of each CB nanoparticles before exposure although the difference between the effects of NAC-treated and untreated 14nm CB did not achieve significant. In conclusion, CB nanoparticles have innate oxidative capacity that may be dependent on the surface area. CB nanoparticles can induce oxidative stress in alveolar epithelial cells and AM that is more prominent with smaller particles. The oxidative stress may, at least partially, be mediated by surface function of particles.

Air Pollutants↗

Mechanism of formation of inorganic and organic nanoparticles from microemulsions.

This chapter essentially deals with the preparation of nanoparticles using microemulsions. The preparation of inorganic nanoparticles--Ni2B, Pt, Au, Pt-Au, AgX--and the synthesis of organic nanoparticles--cholesterol, rhovanil, rhodiarome--are systematically studied as a function of the concentration of the precursor molecules, the size of the inner water cores, and the manner of mixing the various solutions. Two different behaviors are observed in the various systems. The first case shows a dependence of the nanoparticle size on the various physicochemical parameters. Either a monotonous increase of the size or the presence of a minimum is observed as a function of the concentration of the precursor molecules. This case can be easily explained following the LaMer diagram, where the nucleation of the nanoparticles is separated from the particle growth. The second case does not show any dependence of the nanoparticle size on the physicochemical parameters. The size remains constant in all experimental conditions. The constant character of the size can be explained only by thermodynamic stabilization, where particles with a certain size are better stabilized. It should be emphasized that the size distribution is small in all the cases studied. Finally, the aging of the nanoparticles was also checked, especially for the organic nanoparticles. It is concluded that these particles remain stable for months in the microemulsion.

Journal Article↗

Modulation of surface charge, particle size and morphological properties of chitosan-TPP nanoparticles intended for gene delivery.

This work investigates the polyanion initiated gelation process in fabricating chitosan-TPP (tripolyphosphate) nanoparticles in the size range of 100-250 nm intended to be used as carriers for the delivery of gene or protein macromolecules. It demonstrates that ionic gelation of cationic chitosan molecules offers a flexible and easily controllable process for systematically and predictably manipulating particle size and surface charge which are important properties in determining gene transfection efficacy if the nanoparticles are used as non-viral vectors for gene delivery, or as delivery carriers for protein molecules. Variations in chitosan molecular weight, chitosan concentration, chitosan to TPP weight ratio and solution pH value were examined systematically for their effects on nanoparticle size, intensity of surface charge, and tendency of particle aggregation so as to enable speedy fabrication of chitosan nanoparticles with predetermined properties. The chitosan-TPP nanoparticles exhibited a high positive surface charge across a wide pH range, and the isoelectric point (IEP) of the nanoparticles was found to be at pH 9.0. Detailed imaging analysis of the particle morphology revealed that the nanoparticles possess typical shapes of polyhedrons (e.g., pentagon and hexagon), indicating a similar crystallisation mechanism during the particle formation and growth process. This study demonstrates that systematic design and modulation of the surface charge and particle size of chitosan-TPP nanoparticles can be readily achieved with the right control of critical processing parameters, especially the chitosan to TPP weight ratio.

Animals↗

Transport of nanoparticles across an in vitro model of the human intestinal follicle associated epithelium.

An in vitro model of the human follicle associated epithelium (FAE) was characterized and the influence of nanoparticle properties on the transcellular transport across the in vitro model was investigated. The model was established by co-culturing Caco-2 and Raji cells, with Caco-2 cells alone as control. The conversion of Caco-2 cells to follicle associated epithelium (FAE) like cells was monitored by following the surface expression of beta1-integrins (immunofluorescence) and nanoparticle transport (flow cytometry). The influence of the nanoparticle concentration at the apical side, temperature, size and surface properties of nanoparticles on transport was evaluated, as well as the influence of transport conditions. The conversion of Caco-2 cells into FAE-like cells occurred. The transport was concentration, temperature and size-dependent. Aminated nanoparticles were more efficiently transported than carboxylated nanoparticles, suggesting a role of nanoparticle surface functional groups and hydrophobicity, possibly leading to a different pattern of protein adsorption at their surface. In conclusion, this in vitro model is a promising tool to study the role of M cells in transintestinal nanoparticle transport, as well as to evaluate new drug delivery systems.

B-Lymphocytes↗

Cellular recognition of paclitaxel-loaded polymeric nanoparticles composed of poly(gamma-benzyl L-glutamate) and poly(ethylene glycol) diblock copolymer endcapped with galactose moiety.

Poly(gamma-benzyl L-glutamate) (PBLG)/poly(ethylene glycol) (PEG) diblock copolymer endcapped with galactose moiety (abbreviated as GEG) was synthesized and characterized for study of liver-specific targeting. From dynamic light scattering measurement, particle sizes of copolymeric nanoparticles were decreased with an increase of PEG in the copolymer. The morphology of GEG-3 nanoparticles observed by transmission electron micrograph was observed as almost spherical shapes and ranged about 50-300 nm. From the structural characterization using 1H nuclear magnetic resonance, both characteristic peaks of PBLG and PEG were visible in CDCl3 but the characteristic peaks of PBLG were invisible in D2O, indicating that GEG block copolymers are found to the core-shell type nanoparticles in water with PBLG innercore and PEG outershell, exposing that galactose moiety of GEG block copolymers are outerwards oriented on the nanoparticle surfaces. By galactose-specific aggregation test of particles using beta-galactose specific lectin, and flow cytometry measurement, specific interaction between asialoglycoprotein receptors (ASGPR) of HepG2, human hepatoma cell line, and galactose moieties of the GEG nanoparticles was confirmed. From cell cytotoxicity test, HepG2 cells with ASGPR are more sensitive to paclitaxel (TX)-loaded nanoparticles than free TX whereas, P388 cells, murine leukemia cell line, and SK-Hep 01, human hepatoma cell line, without ASGPR is less sensitive to TX-loaded nanoparticles than free TX, suggesting that specific interaction between HepG2 cells and galactose moiety of the nanoparticles occurred.

Animals↗