Search PubMed⌕ Search

SEARCH · Search PubMed

Results for “Bioelectric Energy Sources”

Search indexed PubMed citations on genomics, clinical trials, systematic reviews and public health. Explore titles, authors and supplied subject terms, then open the PubMed record.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 343 records · Page 19Linked to original sources
PubMed2005

Generating electricity while walking with loads.

We have developed the suspended-load backpack, which converts mechanical energy from the vertical movement of carried loads (weighing 20 to 38 kilograms) to electricity during normal walking [generating up to 7.4 watts, or a 300-fold increase over previous shoe devices (20 milliwatts)]. Unexpectedly, little extra metabolic energy (as compared to that expended carrying a rigid backpack) is required during electricity generation. This is probably due to a compensatory change in gait or loading regime, which reduces the metabolic power required for walking. This electricity generation can help give field scientists, explorers, and disaster-relief workers freedom from the heavy weight of replacement batteries and thereby extend their ability to operate in remote areas.

Bioelectric Energy Sources↗
PubMed1997

Influence of electric fields and pH on biofilm structure as related to the bioelectric effect.

Mixed species biofilms of Klebsiella pneumoniae, Pseudomonas fluorescens, and Pseudomonas aeruginosa were grown in a flow cell fitted with two platinum wire electrodes. The biofilm growing on the wires reached a thickness of approximately 50 microm after 3 days. When a voltage was applied with oscillating polarity, the biofilm attached to the wire expanded and contracted. The biofilm expanded by approximately 4% when the wire was cathodic but was reduced to 74% of the original thickness when the wire was anodic. The phenomenon was reproduced by alternately flushing the flow cell with media adjusted to pH 3 and pH 10 with no electric current. At pH 10 the biofilm was unaltered, but it became compacted to 69% of the original thickness at pH 3. We explained these phenomena in terms of the molecular interactions between charged acidic groups in the biofilm slime and the bacterial cell walls. Contraction of the biofilm under acidic conditions may be caused by (i) the elimination of electrostatic repulsion from neutralization of negatively charged carboxylate groups through protonation and (ii) subsequent hydrogen bonding between the carboxylic acids and oxygen atoms in the sugars. Electrostatic interactions between negatively charged groups in the biofilm and the charged wire may also be expected to cause biofilm expansion when the wire was cathodic and contraction when the wire was anodic. The consequences of the explanation of the increased susceptibility of biofilm cells to antibiotics in an electric field, the "bioelectric effect," are discussed.

Analysis of Variance↗
PubMed2006

Biofilm and nanowire production leads to increased current in Geobacter sulfurreducens fuel cells.

Geobacter sulfurreducens developed highly structured, multilayer biofilms on the anode surface of a microbial fuel cell converting acetate to electricity. Cells at a distance from the anode remained viable, and there was no decrease in the efficiency of current production as the thickness of the biofilm increased. Genetic studies demonstrated that efficient electron transfer through the biofilm required the presence of electrically conductive pili. These pili may represent an electronic network permeating the biofilm that can promote long-range electrical transfer in an energy-efficient manner, increasing electricity production more than 10-fold.

Acetates↗
PubMed2004

Potential role of a novel psychrotolerant member of the family Geobacteraceae, Geopsychrobacter electrodiphilus gen. nov., sp. nov., in electricity production by a marine sediment fuel cell.

Previous studies have shown that members of the family Geobacteraceae that attach to the anodes of sediment fuel cells are directly involved in harvesting electricity by oxidizing organic compounds to carbon dioxide and transferring the electrons to the anode. In order to learn more about this process, microorganisms from the anode surface of a marine sediment fuel cell were enriched and isolated with Fe(III) oxide. Two unique marine isolates were recovered, strains A1(T) and A2. They are gram-negative, nonmotile rods, with abundant c-type cytochromes. Phylogenetic analysis of the 16S rRNA, recA, gyrB, fusA, rpoB, and nifD genes indicated that strains A1(T) and A2 represent a unique phylogenetic cluster within the Geobacteraceae. Both strains were able to grow with an electrode serving as the sole electron acceptor and transferred ca. 90% of the electrons available in their organic electron donors to the electrodes. These organisms are the first psychrotolerant members of the Geobacteraceae reported thus far and can grow at temperatures between 4 and 30 degrees C, with an optimum temperature of 22 degrees C. Strains A1(T) and A2 can utilize a wide range of traditional electron acceptors, including all forms of soluble and insoluble Fe(III) tested, anthraquinone 2,6-disulfonate, and S(0). In addition to acetate, both strains can utilize a number of other organic acids, amino acids, long-chain fatty acids, and aromatic compounds to support growth with Fe(III) nitrilotriacetic acid as an electron acceptor. The metabolism of these organisms differs in that only strain A1(T) can use acetoin, ethanol, and hydrogen as electron donors, whereas only strain A2 can use lactate, propionate, and butyrate. The name Geopsychrobacter electrodiphilus gen. nov., sp. nov., is proposed for strains A1(T) and A2, with strain A1(T) (ATCC BAA-880(T); DSM 16401(T); JCM 12469) as the type strain. Strains A1(T) and A2 (ATCC BAA-770; JCM 12470) represent the first organisms recovered from anodes that can effectively couple the oxidation of organic compounds to an electrode. Thus, they may serve as important model organisms for further elucidation of the mechanisms of microbe-electrode electron transfer in sediment fuel cells.

Bioelectric Energy Sources↗
PubMed2005

Assessment of the ability of the bioelectric effect to eliminate mixed-species biofilms.

Microbes have been able to persist in water distribution systems through the development of multicellular communities known as biofilms. This study evaluated the usefulness of the bioelectric effect for the elimination of water distribution system biofilms from annular reactors. The bioelectric effect did not have any bactericidal action either alone or when coupled with free chlorine.

Bioelectric Energy Sources↗
PubMed2005

Evidence for involvement of an electron shuttle in electricity generation by Geothrix fermentans.

In experiments performed using graphite electrodes poised by a potentiostat (+200 mV versus Ag/AgCl) or in a microbial fuel cell (with oxygen as the electron acceptor), the Fe(III)-reducing organism Geothrix fermentans conserved energy to support growth by coupling the complete oxidation of acetate to reduction of a graphite electrode. Other organic compounds, such as lactate, malate, propionate, and succinate as well as components of peptone and yeast extract, were utilized for electricity production. However, electrical characteristics and the results of shuttling assays indicated that unlike previously described electrode-reducing microorganisms, G. fermentans produced a compound that promoted electrode reduction. This is the first report of complete oxidation of organic compounds linked to electrode reduction by an isolate outside of the Proteobacteria.

Acetates↗
PubMed1975

A multichannel implantable telemetry system for flow, pressure, and ECG measurements.

The design of telemetry systems for chronic implantation within the body have progressed from simple single-channel devices to complex multichannel systems over the last 15 yr. Although chronic measurements of temperature, ECG, and pressure have been reported with good results, measurements such as dimension and blood flow have been difficult because of heavy power requirements. The design to be described is a multiplex system that will measure up to eight individual parameters simultaneously, including blood flow. Flow is measured using an electromagnetic transducer, and by special design, the normal high power requirements of the electromagnetic technique have been reduced to a few hundred milliwatts. The system is powered by two NiCad, rechargeable batteries which are periodically recharged through the intact skin by induction at 250 kHz to an implanted pickup coil. The presently constructed units have been configured to measure ECG, two pressures, temperature and ascending aortic flow.

Animals↗
PubMed2002

Material and energy balances in a large-scale aerobic bioconversion cell.

On the basis of earlier experimental studies of the aerobic bioconversion of organic wastes, the preferred values of operating parameters and the biochemical rate constants of oxidation to CO2 and H2O were identified. Energy and material balances were then constructed for a large, 3 m deep aerobic cell holding 1,440 tons of the 'wet' component of organic wastes (major organic constituent: [C6H10O4]n). It was found that conduction/convection and radiation losses to the surroundings amount to a relatively small fraction of the chemical heat released by oxidation. Therefore, the surplus chemical heat must be removed by means of an upward water-saturated air flow that is several-fold the stoichiometric requirement for biodegradation. This study has quantified a basic process difference between anaerobic and aerobic bioconversion of organic matter: In the former, most of the chemical energy in the converted organic matter is stored chemically in the generated methane gas. In the latter, this energy is released in the cell and must be carried out in a relatively large air/water vapour flow through the cell.

Air Movements↗
PubMed2003

Plasma chemical gasification of sewage sludge.

The possibility for plasma gasification of sewage sludge is investigated. Water steam is used as the plasma generating gas and as a chemical reagent. The experiments are carried out at a sludge to water steam ratio of 1 to 1.5 by weight, and at a plasma torch temperature of up to 2600 degrees C. The calculated average temperature in the reactor after mixing with the sludge particles is up to 1700 degrees C. Proximate and ultimate analyses of the sludge are given. The resulting gases are analysed by gas chromatography. High calorific gas containing mainly carbon monoxide (48% volume) and hydrogen (46% volume), as well as glass-like slag, is obtained. No water-soluble substances are detected within it. The amount of carbon dioxide produced is under 4% mass. No hydrocarbons are observed within the gas. The investigated process is environmentally safe, compact and shows a high rate of conversion.

Bioelectric Energy Sources↗
PubMed2005

Comparative performance between temperature-phased and conventional mesophilic two-phased processes in terms of anaerobically produced bioenergy from food waste.

Comparative evaluation of bioenergy production from food waste was carried out with both a temperature-phased and a conventional mesophilic two-phased process at different organic loading rates (OLRs). No methane was detected in the temperature-phased thermophilic-acidogenic fermenter at all the OLRs tested. However, a significant amount of methane content was detected in the conventional two-phased mesophilic-acidogenic fermenter, with increments depending on the organic loading rate [from 17% at 3 g VS L(-1) day(-1) to 25% at 8 g VS L(-1) day(-1) (VS, volatile solid)]. Acetate and butyrate were the main volatile fatty acids (VFAs) in the temperature-phased thermophilic-acidogenic fermenter; conversely propionate was a major VFA in the conventional two-phased mesophilic-acidogenic fermenter. Through the chemical oxygen demand (COD) balance of both temperature-phased and conventional mesophilic two-phased processes, the fraction of the feed-COD converted to the hydrogen-COD in the thermophilic-acidogenic fermenter within the former process was estimated from 7.9 to 9.3%, with a peak at ORL of 6 g VS L(-1) day(-1), whereas it was quantified from 0.3 to 0.9% in the mesophilic-acidogenic fermenter within the latter one. Moreover, the fraction of the feed-COD converted to the methane-COD in the mesophilic-acidogenic fermenter within the conventional two-phased process ranged from 5.4 to 7.9%. On the other hand, conversion of the feed-COD to the methane-COD in the mesophilic-methanogenic fermenter of both temperature-phased and conventional mesophilic two-phased processes ranged from 66.2 to 72.3% and from 63.5 to 70.5%, respectively, with decrements related to the increase of organic loading rate.

Bioelectric Energy Sources↗
PubMed2005

Quality control of waste to incineration--waste composition analysis in Lidköping, Sweden.

In order to decrease environmental impacts in waste management the choice of treatment method must be based on the characteristics of the waste. Present sampling procedures do not provide statistically representative samples of solid waste and this provides difficulties in characterization. The objective of this study was to develop a procedure for waste component analysis and sampling of waste after collection and at plant level. A further objective was to characterize the waste delivered to an incineration plant for physical and chemical properties and to determine the amounts of delivered waste that could be classified as biofuels and fossil fuels. The proportions of recyclables and hazardous waste were also examined. Samples were taken randomly from waste trucks and divided by square implementation. Statistical analysis of the results showed that the number of sub-samples could be decreased with only a moderate increase in the confidence interval. This means that future waste composition analyses could be made more efficient and thereby less expensive. The analysis of the waste delivered to the Lidköping incineration plant (Central Sweden) showed that 66.4% of the household waste was composed of biofuels and 21.3% of non-renewable combustibles, of which 40.3% were recyclables. In addition, 11.6% of the household waste was non-combustible and 0.6% hazardous waste. The heat value for the biofuels was 18.0-19.7 MJ kg(-1) dry mass (DM) and for the fossil fuels 28.2-33.9 MJ kg(-1) DM. The industrial waste consisted of 35.9% biofuels, 62.0% fossil fuels, 1.6% non-combustible and 0.5% hazardous waste. The heat value was 19.5 MJ kg(-1) DM for the biofuels and 31.4 MJ kg(-1) DM for the fossil fuels.

Bioelectric Energy Sources↗
PubMed2002

Daily average exposures to respirable particulate matter from combustion of biomass fuels in rural households of southern India.

Indoor air pollution resulting from combustion of biomass fuels in rural households of developing countries is now recognized as a major contributor to the global burden of disease. Accurate estimation of health risks has been hampered by a paucity of quantitative exposure information. In this study we quantified exposures to respirable particulate matter from biomass-fuel combustion in 436 rural homes selected through stratified random sampling from four districts of Tamil Nadu, India. The study households are a subset of a larger sample of 5,028 households from the same districts in which socioeconomic and health information has been collected. Results of measurements for personal exposures to respirable particulate matter during cooking were reported earlier. This has been extended to calculation of 24-hr exposures with the aid of additional measurements during noncooking times and the collection of time-activity records. Concentrations of respirable particulate matter ranged from 500 to 2,000 micro g/m(3) during cooking in biomass-using households, and average 24-hr exposures ranged from 90 +/- 21 micro g/m(3) for those not involved in cooking to 231 +/- 109 micro g/m(3) for those who cooked. The 24-hr exposures were around 82 +/- 39 micro g/m(3) for those in households using clean fuels (with similar exposures across household subgroups). Fuel type, type and location of the kitchen, and the time spent near the kitchen while cooking were the most important determinants of exposure across these households among other parameters examined, including stove type, cooking duration, and smoke from neighborhood cooking. These estimates could be used to build a regional exposure database and facilitate health risk assessments.

Adult↗
PubMed2002

The origin, fate, and health effects of combustion by-products: a research framework.

Incomplete combustion processes can emit organic pollutants, metals, and fine particles. Combustion by-products represent global human and environmental health challenges that are relevant not only in heavily industrialized nations, but also in developing nations where up to 90% of rural households rely on unprocessed biomass fuels for cooking, warmth, and light. These issues were addressed at the Seventh International Congress on Combustion By-Products, which convened 4-6 June 2001 in Research Triangle Park, North Carolina. This congress included a diverse group of multidisciplinary researchers and practitioners who discussed recent developments and future goals in the control of combustion by-products and their effects of exposure on human and ecologic health. Participants recommended that interdisciplinary, coordinated research efforts should be focused to capitalize on the important potential synergisms between efforts to reduce the adverse human health effects linked to exposures to combustion by-products and broader efforts to reduce greenhouse gas emissions and save energy through efficiency. In this article we summarize the principal findings and recommendations for research focus and direction.

Bioelectric Energy Sources↗