Search PubMed⌕ Search

SEARCH · Search PubMed

Results for “Humidity”

Search indexed PubMed citations on genomics, clinical trials, systematic reviews and public health. Explore titles, authors and supplied subject terms, then open the PubMed record.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 325 records · Page 18Linked to original sources
PubMed1997

Stability Factors of Foam Film in Contrast to Fluctuation Induced by Humidity Reduction

We have examined the relationship between dynamic surface properties of aqueous SDS solutions and foam film stability by observing the dynamic surface tension (gammat ), elongation of the lamellae (L lamellae ), and the thickness of the lamellae measured by FT-IR. Three foam film models were used by controlling such factors as the Marangoni effect by changing the SDS concentration, the disjoining pressure with the addition of electrolytes, and the surface viscosity with the addition of glycerin. In order to obtain information about the most effective factor in foam film stability, the lifetime of these films was measured under the circumstances of low relative humidity, at which vigorous fluctuation occured in the foam film. Foam film stability was found to be remarkably enhanced by the Marangoni effect and surface shear viscosity in a thin aqueous film at a relative humidity between 60 and 75%. Under these conditions, mild fluctuation would occur in the films. On the other hand, foam film stability was found to be maintained by the disjoining pressure in a thin aqueous film at the humidity below 60%. Under these conditions, vigorous fluctuation would occur in the foam film. It is concluded that foam film stability of an ionic surfactant solution mainly depends on the disjoining pressure which generates a repulsion force between the two surfaces in contrast to the vigorous fluctuation induced by humidity reduction.

Journal Article↗
PubMed2006

Experimental humidity dependency of small particle adhesion on silica and titania.

The humidity present in ambient atmosphere affects the adhesion of small particles by causing capillary bridge formation between the particle and the surface. Even in moderate relative humidities this, usually attractive, force can have a significant effect on adhesion behaviour of micro and sub-micro particles. We have directly measured the pull-off forces of initially adhered oxide particles on oxide surfaces with atomic force microscope in controlled atmosphere with adjustable humidity. We demonstrate the effect of the surface roughness resulting in two different regions of capillary formation and the particle shape having a strong effect on the humidity dependency of adhesion. The experimental results are explained by theoretical framework.

Journal Article↗
PubMed2005

Discriminative detection of volatile sulfur compound mixtures with a plasma-polymerized film-based sensor array installed in a humidity-control system.

We demonstrated the discrimination of volatile sulfur compound mixtures with different mixing ratios by using an array of the plasma-polymerized film (PPF)-coated quartz crystal resonators. The PPF sensor array, which contains PPFs prepared from amino acids and synthetic polymers, exhibited different response patterns to mono or mixed volatile sulfur compounds (VSCs) (hydrogen sulfide and methanethiol) under a dry environment. The sensor array was installed in a desktop-size relative humidity controller. The relative humidity and temperature conditions of the sample flow to the sensor cell were equalized to those of the inner atmosphere of the sensor cell based on the concept of the two-separate-temperatures method. In this way, the baseline drift of PPF sensor response caused by the introduction of a highly humid sample was successfully suppressed. We compared the sensor array responses under the controlled humidity conditions. Presorption of water molecules by PPFs caused a decrease of sensor sensitivity, but the films still had the ability to discriminate sub-ppmv VSC mixtures having 6:1, 1:1, and 1:6 mixture ratios of hydrogen sulfide and methanethiol.

Journal Article↗
PubMed2004

Solvation of uranyl(II) and europium(III) cations and their chloro complexes in a room-temperature ionic liquid. A theoretical study of the effect of solvent "humidity".

We report a molecular dynamics study of the solvation of the UO2(2+) and Eu3+ cations and their chloro complexes in the [BMI][PF6][H2O] "humid" room-temperature ionic liquid (IL) composed of 1-butyl-3-methylimidazolium+ and PF6- ions and H2O in a 1:1:1 ratio. When compared to the results obtained in dry [BMI][PF6], the present results reveal the importance of water. The "naked" cations form UO2(H2O)5(2+) and Eu(H2O)9(3+) complexes, embedded in a shell of 7 and 8 PF6- anions, respectively. All studied UO2Cln(2-n) and EuCln(3-n) chloro complexes remain stable during the dynamics and coordinate additional H2O molecules in their first shell. UO2Cl4(2-) and EuCl6(3-) are surrounded by an "unsaturated" water shell, followed by a shell of BMI+ cations. According to an energy component analysis, the UO2Cl4(2-) and EuCl6(3-) species, intrinsically unstable toward dissociation, are more stable than their less halogenated analogues in the IL solution, due to the solvation forces. The different chloro species also interact better with the humid than with the dry IL, which hints at the importance of solvent humidity to improve their solubility. Humidity markedly modifies the local ion environment, with major consequences as far as their spectroscopic properties are concerned. We finally compare the aqueous interface of [BMI][PF6] and [OMI][PF6] ionic liquids, demonstrating the importance of imidazolium substituents (N-butyl versus N-octyl) to the nature of the interface and miscibility with water.

Journal Article↗
PubMed2002

X-ray reflectivity and diffraction studies on lipid and lipopolymer Langmuir-Blodgett films under controlled humidity.

Synchrotron X-ray reflectivity and grazing incidence diffraction were applied to study the structures of phospholipid Langmuir-Blodgett films under controlled humidity. Distearoylphosphatidylethanolamine (DSPE) and DSPE-PEO lipopolymers, in which a poly(ethylene oxide) chain with n = 8, 17, or 45 EO units is covalently linked to the polar headgroup of DSPE, were used. When the relative humidity was changed from below 2 to 97%, the phosphate headgroup in a DSPE film was hydrated with a concomitant thickness increase of 4.2 A and an electron density decrease. The swelling of the monolayer was found to be a reversible process without any significant roughening of the film. Subtle differences in the film thickness could be detected for DSPE monolayers transferred under various lateral pressures. The degree of lateral ordering of the alkyl chains in DSPE monolayers increased considerably when the humidity was raised. In the case of DSPE-PEO with eight EO units, the hydration of the monolayer was also found to be reversible, but the water uptake was larger due to the presence of the hydrophilic polymer interlayer, which is located between the substrate and the DSPE moieties. Under high humidity, the lipopolymer monolayer with n = 17 exhibited a well-defined, layered structure similar to that of DSPE-PEO with n = 8. In the case of n = 45, however, there are indications for a significant intermixing of the polymer with the DSPE moieties, probably resulting in the formation of hydrophobic nanodomains of closely packed alkyl chains that are immersed into the hydrated polymer.

Journal Article↗
PubMed2006

Alkali cation extraction by calix[4]crown-6 to room-temperature ionic liquids. The effect of solvent anion and humidity investigated by molecular dynamics simulations.

We report a molecular dynamics study on the solvation of M+ (Na+ to Cs+) alkali cations and of their LM+ complexes with a calix[4]arene host (L = 1,3-dimethoxy-calix[4]arene-crown-6 in the 1,3-alternate conformation) in the [BMI][PF6] and [BMI][Tf2N] room-temperature ionic liquids "ILs" based on the BMI+ (1-butyl-3-methylimidazolium) cation. The comparison of the two liquids and the dry versus humid form of the former one (with a 1:1 ratio of H2O and BMI+PF6- species) reveals the importance of humidity: in [BMI][PF6]-dry as in the [BMI][Tf2N] liquid, the first solvation shell of the "naked" M+ ions is composed of solvent anions only (four PF6- anions, and from four to five Tf2N- anions, respectively, quasi-neutralized by a surrounding cage of BMI+ cations), while in the [BMI][PF6]-humid IL, it comprises from one to three solvent anions and about four H2O molecules. In the LM+ complexes, the cation is shielded from solvent, but still somewhat interacts with a solvent anion in the dry ILs and with water in the humid IL. We also report tests on M+ interactions with solvent anions PF6- and Tf2N- in the gas phase, showing that the AMBER results are in satisfactory agreement with QM results obtained at different levels of theory. The question of ion recognition by L is then examined by free energy perturbation studies in the three liquids, predicting a high Cs+/Na+ selectivity upon liquid extraction from an aqueous phase, in agreement with experimental results on a parent calixarene host. A similar Cs+/Na+ selectivity is predicted upon complexation in a homogeneous IL phase, mainly due to the desolvation energy of the free cations. Thus, despite their polar character, ionic liquids qualitatively behave as classical weakly polar organic liquids (e.g., choroform) as far as liquid-liquid extraction is concerned but more like polar liquids (water, alcohols) as far as complexation in a single phase is concerned.

Journal Article↗
PubMed2006

Photoelectrochemical study on charge transfer properties of TiO2-B nanowires with an application as humidity sensors.

One-dimensional (1-D) TiO2-B nanowires have been synthesized via a facile solvothermal route. The morphology and crystalline structures of the nanowires were characterized by using powder X-ray diffraction, low/high-resolution transmission electron microscopy, and Brunauer-Emmett-Teller methods. It is important with the calcination treatment at 350 degrees C to maintain 1-D morphologies of the material in the form of single-crystalline TiO2-B nanowires. In addition, a simple method was used to study the photogenerated charge transfer and photoelectrochemical properties of the TiO2-B nanowires in comparison with commercial TiO2 P25 nanoparticles based on the experimental data from the electric field-effected photocurrent action spectrum and Mott-Schottky measurements. It was revealed that TiO2-B nanostructures played an important role in the photoelectrochemical processes. The synthetic TiO2-B nanowire electrode exhibited unique electronic properties, e.g., favorable charge-transfer ability, negative-shifted appearing flat-band potential, existence of abundant surface states or oxygen vacancies, and high-level dopant density. Moreover, the obtained TiO2-B nanowires were found to display excellent humidity sensing abilities as functional materials in the humidity sensor application. With relative humidity increased from 5% to 95%, about one and half orders of magnitude change in resistance was observed in the TiO2-B nanowire-based surface-type humidity sensors.

Journal Article↗
PubMed2005

Locally enhanced relative humidity for scanning probe nanolithography.

The formation of a water meniscus between a sharp tip and a solid surface is one of the prevailing requirements for scanning probe microscope (SPM)-based lithographies, such as dip-pen nanolithography (DPN) and conductive tip induced oxidation. The water meniscus functions as a medium for the oxidation of or mass transfer to the solid surface. Here we report a simple, efficient, and effective approach to enhance the local relative humidity and thus increase the size of the water meniscus by bringing a water-containing capillary tube to the proximity of the tip-surface contact area. The enhancement in local relative humidity is confirmed via an increase in the measured tip-surface adhesion forces and the widths of DPN generated parallel lines. Compared to the global control of relative humidity for the whole lithography system, the short distance between the "water reservoir" and the tip-surface contact area enables rapid increase in the local vapor pressure of water, less perturbation, and minimal erosion to the state-of-the-art electronics. As a result, most scanning probe lithography experiments at high relative humidity can now be performed in a reasonable time frame.

Letter↗
PubMed2005

Effect of humidity on the adsorption kinetics of lung surfactant at air-water interfaces.

The in vitro adsorption kinetics of lung surfactant at air-water interfaces is affected by both the composition of the surfactant preparations and the conditions under which the assessment is conducted. Relevant experimental conditions are surfactant concentration, temperature, subphase pH, electrolyte concentration, humidity, and gas composition of the atmosphere exposed to the interface. The effect of humidity on the adsorption kinetics of a therapeutic lung surfactant preparation, bovine lipid extract surfactant (BLES), was studied by measuring the dynamic surface tension (DST). Axisymmetric drop shape analysis (ADSA) was used in conjunction with three different experimental methodologies, i.e., captive bubble (CB), pendant drop (PD), and constrained sessile drop (CSD), to measure the DST. The experimental results obtained from these three methodologies show that for 100% relative humidity (RH) at 37 degrees C the rate of adsorption of BLES at an air-water interface is substantially slower than for low humidity. It is also found that there is a difference in the rate of surface tension decrease measured from the PD and CB/CSD methods. These experimental results agree well with an adsorption model that considers the combined effects of entropic force, electrostatic interaction, and gravity. These findings have implications for the development and evaluation of new formulations for surfactant replacement therapy.

Journal Article↗
PubMed2006

Humidity-sensing inverse opal hydrogels.

Soft material hydrogel sensors have seen increased interest recently. Most of these sensors are used in an aqueous environment. In this study, we depart from this trend and analyze the ability of a periodic hydrogel structure to respond to variations in ambient humidity through an optical change. First, a polyacrylamide inverse opal hydrogel structure was created from a colloidal crystal template. Next, this material was tested under various humidity conditions and responded to these changes by shifting its optical reflection peak noticeably within the visible wavelength range. This effect opens the doors for these materials as humidity sensors. The kinetics of the peak shifts was also observed, showing a rapid response to ambient humidity changes. Finally, the structural dimension change is compared through peak shifts, Fabry-Perot fringes of the optical cavity, and scanning electron microscopy observations.

Journal Article↗
PubMed2000

Crystal structure of the low-humidity form of aspartame sweetener.

The low-humidity IB crystal form of aspartame (L-alphaaspartyl-L-phenylalanine methyl ester) is prepared via humidity-induced transition from the highly hydrated IA crystal form and is used widely as a sweetener. The crystal structure of the low-humidity IB form is determined at 1.05 A resolution (0.476 A(-1) in maximum sintheta/lambda) from an extremely fine fibrous crystal using synchrotron radiation. There are three aspartame molecules and two water molecules in the asymmetric unit of the monoclinic space group P2(1). Each aspartame molecule adopts an almost identical extended conformation which is commonly observed in other crystal forms of aspartame. Three aspartame molecules are assembled into a triangular trimer, and trimer units are stacked along the b-axis via hydrogen-bonding and electrostatic interactions in the main chains and also via hydrophobic contacts in the phenyl side-chains. Six trimer units are related by pseudo 6(1)-screw axis symmetry and form a hydrophilic channel at their center. The hydrophilic channel in the IB form contains only four water molecules in the unit cell, compared with 16 in the IA form. Although the IB form exhibits a trimer structure similar to that of the IA form, one aspartame molecule is rotated by approximately equals 20 degrees from the orientation in the IA form. This arrangement of the molecule implies that the humidity-induced transition is accompanied by a flapping motion of its methyl ester group. These structural differences may imply the stepwise transition from the IA to the IB forms.

Aspartame↗
PubMed2004

Humidity sensitive properties of alkoxysilane-crosslinked polyelectrolyte using sol-gel process.

New trialkoxysilyl group-containing copolymers for humidity-sensitive polyelectrolytes were prepared by copolymerization of [2-(methacryloyloxy)ethyl]trimethyl ammonium chloride (METAC), 3-(trimethoxysilyl)propyl methacrylate (TSPM) and 2-ethylhexyl acrylate (2-EHA). They were self-crosslinkable copolymers composed of different contents of METAC/TSPM/2-EHA = 4/1/5 and 4/2/4. The resistance varied from 10(7) to 10(3)[capital Omega] between 20% RH and 95% RH, which was required for a humidity sensor operating at ambient humidity. Temperature dependence, hysteresis, response time, water durability and long-term stability at high temperature and humidity were also measured and estimated.

Journal Article↗
PubMed2005

Solvation of uranyl-CMPO complexes in dry vs. humid forms of the [BMI][PF6] ionic liquid. A molecular dynamics study.

The solvation of the [UO(2)(NO(3))(CMPO)](+) and [UO(2)(NO(3))(2)(CMPO)(2)] complexes (CMPO = octyl(phenyl)-N,N-diisobutylmethylcarbamoyl phosphine oxide) is investigated by molecular dynamics in the "dry" and "humid" forms of a room temperature ionic liquid (IL) based on the 1-butyl-3-methylimidazolium (BMI(+)) cation and the hexafluorophosphate (PF(6)(-)) anion. The simulations reveal the importance of the solvent anions in "dry" conditions and of water molecules in the "humid" solvent. For the [UO(2)(NO(3))(CMPO)](+) complex, the monodentate vs. bidentate coordination modes of CMPO are compared, and the first solvation shell of uranyl is completed by 1-3 PF(6)(-) anions in the dry IL and by 2-3 water molecules in the humid IL, leading to a total coordination number close to 5. The energy analysis shows that interactions with the IL stabilize the [UO(2)(NO(3))(bi)(CMPO)(mono)](+) form (with bidentate nitrate and monodentate CMPO) in the dry IL and the [UO(2)(NO(3))(mono)(CMPO)(mono)](+) form (with monodentate nitrate and CMPO) in the humid IL. The extracted compound characterized by EXAFS is thus proposed to be the [UO(2)(NO(3))(mono)(CMPO)(mono)(H(2)O)(3)](+) species. Furthermore we compare the [UO(2)(NO(3))(2)(CMPO)(2)] complex in its associated and dissociated forms ([UO(2)(NO(3))(mono)(CMPO)(mono)](+) + CMPO + NO(3)(-)) and discuss the results in the context of uranyl extraction by CMPO to ionic liquids.

Carbamates↗
PubMed1992

Alteration of Components of Leaf Water Potential and Water Content in Velvetleaf under the Effects of Long-Term Humidity Difference.

Velvetleaf (Abutilon theophrasti Medik.) was grown in growth chambers set at 45 or 85% relative humidity at 30 degrees C, CO(2) 350 microliters per liter and 1000 micromoles per square meter per second of photosynthetically active radiation. Soil water potential was maintained at -0.05 megapascal by subirrigation with half strength Hoagland solution. The third, fourth, and fifth leaves from the base of 21- and 25-day-old plants were used for pressure-volume measurements. Components of leaf water status including water potential (osmotic and potential associated with the apoplast), leaf water content (apoplasmic and symplasmic water), and elastic modulus of leaf tissue were determined. Results indicate: (a) persistent dry air generated leaves with lower water potential at a given relative water content than did humid air; (b) the higher total leaf water content in plants grown in dry air was related to an increase in apoplasmic water, whereas symplasmic water remained similar in both humidity treatments; (c) difference in leaf water potential between low and high humidity treatments was related to decreased potential associated with the apoplast but not to a change in cell wall elasticity.

Journal Article↗
PubMed2002

Structures of human oxy- and deoxyhaemoglobin at different levels of humidity: variability in the T state.

High-salt crystals of human oxy- and deoxyhaemoglobin have been studied at different levels of environmental humidity and solvent content. The structure of the oxy form remains relatively unchanged at all levels. The deoxy form, however, undergoes a water-mediated transformation when the relative humidity around the crystals is reduced below 93%. The space group is maintained during the transformation, but the unit-cell volume nearly doubles, with two tetrameric molecules in the asymmetric unit of the low-humidity form compared with one in the native crystals. Interestingly, the haem geometry in the low-humidity form is closer to that in the oxy form than to that in the native deoxy form. The quaternary structure of one of the tetramers moves slightly towards that in the oxy form, while that in the other is more different from the oxy form than that in the high-salt native deoxy form. Thus, it would appear that, as in the case of the liganded form, the deoxy form of haemoglobin can also access an ensemble of related T states.

Crystallography, X-Ray↗
PubMed2002

Relative-humidity profiling in the troposphere with a Raman lidar.

We describe a Raman-lidar-based approach to acquiring profiles of the relative humidity of air. For this purpose we combined in one instrument the Raman-lidar techniques that are used for the profiling of water vapor and temperature. This approach enabled us to acquire, for the first time to our knowledge, vertical profiles of relative humidity through the entire troposphere exclusively from Raman-lidar data. The methods applied to determining the water-vapor mixing ratio, temperature, and relative humidity and the corresponding uncertainties caused by systematic errors and signal noise are presented. The lidar-derived profiles are compared with profiles measured with radiosondes. Radiosonde observations are also used to calibrate the Raman lidar. Close agreement of the profiles of relative humidity measured with lidar and those measured with radiosonde demonstrates the potential of this novel approach.

Journal Article↗
PubMed1990

Crystal structure of low humidity tetragonal lysozyme at 2.1-A resolution. Variability in hydration shell and its structural consequences.

Tetragonal crystals of hen egg white lysozyme undergo a reversible transformation, accompanied by loss of water, when the relative humidity of the environment is reduced to about 90%. The structure of the low humidity form has been analyzed, using x-ray data collected at 88% relative humidity, in order to explore the variability in protein hydration caused by a change in the amount of water surrounding the protein molecule and the consequent conformational perturbations in the molecule. The structure has been refined by the restrained least-squares method to an R value of 0.162 for 6269 observed reflections in the 10-2.1-A resolution shell. The refined structure provides interesting examples for the variability in helical parameters, the role of interactions involving side chains and water in the stabilization of secondary structural features, and favorable specific hydration sites. The protein molecule as a whole moves slightly in the low humidity form from its position in the native crystals. The hydration shell tends to move along with the protein. Significant changes, however, occur in the hydration shell. These changes cause structural perturbations in the enzyme molecule, which are most pronounced in regions involved in substrate binding.

Animals↗
PubMedDate not supplied

[Effect of various humidity on local dynamic structure of lysozyme in a spin-labeled tetragonal crystal].

The dynamics of the side groups of amino acid residues and local conformational changes in the lysozyme molecule upon dehydration and rehydration of lysozyme crystals were studied by the methods of spin label, X-ray diffraction, and molecular dynamics. The His15 residue of lysozyme from chicken egg white was modified by spin label, and spin-labeled tetragonal crystals of the protein were grown. The spatial structure of the covalently bound spin label and its immediate surroundings in the lysozyme tetragonal crystal was determined. The conformation of a fragment of the lysozyme molecule with the spin label on His15, optimized by the method of molecular dynamics, closely agreed with X-ray data. It was found by the X-ray diffraction analysis that a decrease in relative humidity to 40% is accompanied by both a decrease in the unit cell volume by 27% and a change in the diffraction field of roentgenograms from 0.23 to 0.60 HM. The dehydration of spin-labeled lysozyme crystals leads to an anomalous widening of EPR peaks without changes in their position. The dehydration in the humidity range studied has a two-stage character. The decrease in humidity to 75% is accompanied by a sharp change in the parameters measured, and on further decrease in humidity to 40% they change insignificantly. The first stage is caused by the removal of the greater part of molecules of bulk water, and the second stage is due to the removal of the remaining bulk water and possible changes in the dynamics of weakly bound water molecules and their position. The simulation of experimental EPR spectra showed that the anomalous broadening of the spectrum upon dehydration is related to an increase in the dispersion of spin label orientations induced by changes in the network of hydrogen bonds generated by water molecules in the vicinity of the spin label and a possible turn (by no more than 5 degrees) of the entire protein molecule. After rehydration, the physical state of the lysozyme crystal did not return to the starting point.

Crystallization↗