Search PubMed⌕ Search

SEARCH · Search PubMed

Results for “Deinococcus”

Search indexed PubMed citations on genomics, clinical trials, systematic reviews and public health. Explore titles, authors and supplied subject terms, then open the PubMed record.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 307 records · Page 17Linked to original sources

A crevice adjoining the ribosome tunnel: hints for cotranslational folding.

RNA protection experiments and the crystal structure of a complex of the large ribosomal subunit from the eubacterium Deinococcus radiodurans with rapamycin, a polyketide compound resembling macrolides and ketolides, showed that rapamycin binds to a crevice located at the boundaries of the nascent protein exit tunnel, near its entrance. At this location rapamycin cannot occlude the ribosome exit tunnel, consistent with its failure to act as a ribosomal antibiotic drug. In accord with recent biochemical data, this crevice may play a role in facilitating local cotranslational folding of nascent chains, in particular for transmembrane proteins.

Base Sequence↗

Sequence-based approach to finding functional lipases from microbial genome databases.

A sequence-based approach was used to retrieve functional lipases from microbial genome databases. Many novel genes assigned as putative lipases were tested using the criteria of the typical lipase sequence rule, based on a consensus sequence of a catalytic triad (Ser, Asp, His) and oxyanion hole sequence (HG). To obtain the lipase genes satisfying the sequence rule, PCR cloning was performed, while the lipase activities were tested using a tributyrin/tricaprylin plate and p-nitrophenyl caproate. Among nine putative lipases from four strains, five functional lipolytic proteins were obtained from Archaeoglobus fulgidus, Deinococcus radiodurans, and Agrobacterium tumefaciens. All five lipases exhibited a relatively low sequence similarity (less than 26.7%) with known lipases and turned out to belong to different lipase families. Accordingly, the current results indicate that the proposed strategic approach based on the microbial genome is an efficient and rapid method for finding novel and functional lipases.

Agrobacterium tumefaciens↗

The utility of accurate mass and LC elution time information in the analysis of complex proteomes.

The combination of mass and normalized elution time (NET) of a peptide identified by liquid chromatography-mass spectrometry (LC-MS) measurements can serve as a unique signature for that peptide. However, the specificity of an LC-MS measurement depends upon the complexity of the proteome (i.e., the number of possible peptides) and the accuracy of the LC-MS measurements. In this work, theoretical tryptic digests of all predicted proteins from the genomes of three organisms of varying complexity were evaluated for specificity. Accuracy of the LC-MS measurement of mass-NET pairs (on a 0 to 1.0 NET scale) was described by bivariate normal sampling distributions centered on the peptide signatures. Measurement accuracy (i.e., mass and NET standard deviations of +/-0.1, 1, 5, and 10 ppm, and +/-0.01 and 0.05, respectively) was varied to evaluate improvements in process quality. The spatially localized confidence score, a conditional probability of peptide uniqueness, formed the basis for the peptide identification. Application of this approach to organisms with comparatively small proteomes, such as Deinococcus radiodurans, shows that modest mass and elution time accuracies are generally adequate for confidently identifying most peptides. For more complex proteomes, more accurate measurements are required. However, the study suggests that the majority of proteins for even the human proteome should be identifiable with reasonable confidence by using LC-MS measurements with mass accuracies within +/-1 ppm and high efficiency separations having elution time measurements within +/-0.01 NET.

Animals↗

Proteome analyses using accurate mass and elution time peptide tags with capillary LC time-of-flight mass spectrometry.

We describe the application of capillary liquid chromatography (LC) time-of-flight (TOF) mass spectrometric instrumentation for the rapid characterization of microbial proteomes. Previously (Lipton et al., Proc. Natl. Acad. Sci. U.S.A. 2002, 99, 11049) the peptides from a series of growth conditions of Deinococcus radiodurans have been characterized using capillary LC MS/MS and accurate mass measurements which are captured as an accurate mass and time (AMT) tag database. Using this AMT tag database, detected peptides can be assigned using measurements obtained on a TOF due to the additional use of elution time data as a constraint. When peptide matches are obtained using AMT tags (i.e., using both constraints) unique matches of a mass spectral peak occurs 88% of the time. Not only are AMT tag matches unique in most cases, the coverage of the proteome is high; approximately 3500 unique peptide AMT tags are found on average per capillary LC run. From the results of the AMT tag database search, approximately 900 ORFs detected using LC-TOFMS, with approximately 500 ORFs covered by at least two AMT tags. These results indicate that AMT database searches with modest mass and elution time criteria can provide proteomic information for approximately one thousand proteins in a single run of <3 h. The advantage of this method over using MS/MS based techniques is the large number of identifications that occur in a single experiment as well as the basis for improved quantitation. For MS/MS experiments, the number of peptide identifications is severely restricted because of the time required to dissociate the peptides individually. These results demonstrate the utility of the AMT tag approach using capillary LC-TOF MS instruments, and also show that AMT tags developed using other instrumentation can be effectively utilized.

Amino Acid Sequence↗

Structural basis of the ribosomal machinery for peptide bond formation, translocation, and nascent chain progression.

Crystal structures of tRNA mimics complexed with the large ribosomal subunit of Deinococcus radiodurans indicate that remote interactions determine the precise orientation of tRNA in the peptidyl-transferase center (PTC). The PTC tolerates various orientations of puromycin derivatives and its flexibility allows the conformational rearrangements required for peptide-bond formation. Sparsomycin binds to A2602 and alters the PTC conformation. H69, the intersubunit-bridge connecting the PTC and decoding site, may also participate in tRNA placement and translocation. A spiral rotation of the 3' end of the A-site tRNA around a 2-fold axis of symmetry identified within the PTC suggests a unified ribosomal machinery for peptide-bond formation, A-to-P-site translocation, and entrance of nascent proteins into the exit tunnel. Similar 2-fold related regions, detected in all known structures of large ribosomal subunits, indicate the universality of this mechanism.

Bacterial Proteins↗

Ultrasensitive proteomics using high-efficiency on-line micro-SPE-nanoLC-nanoESI MS and MS/MS.

Ultrasensitive nanoscale proteomics approaches for characterizing proteins from complex proteomic samples of <50 ng of total mass are described. Protein identifications from 0.5 pg of whole proteome extracts were enabled by ultrahigh sensitivity (<75 zmol for individual proteins) achieved using high-efficiency (peak capacities of approximately 10(3)) 15-microm-i.d. capillary liquid chromatography separations (i.e., using nanoLC, approximately 20 nL/min mobile-phase flow rate at the optimal linear velocity of approximately 0.2 cm/s) coupled on-line with a micro-solid-phase sample extraction and a nanoscale electrospray ionization interface to a 11.4-T Fourier transform ion cyclotron resonance (FTICR) mass spectrometer (MS). Proteome measurement coverage improved as sample size was increased from as little as 0.5 pg of sample. It was found that a 2.5-ng sample provided 14% coverage of all annotated open reading frames for the microorganism Deinococcus radiodurans, consistent with previous results for a specific culture condition. The estimated detection dynamic range for detected proteins was 10(5)-10(6). An improved accurate mass and LC elution time two-dimensional data analysis methodology, used to both speed and increase the confidence of peptide/protein identifications, enabled identification of 872 proteins/run from a single 3-h nanoLC/FTICR MS analysis. The low-zeptomole-level sensitivity provides a basis for extending proteomics studies to smaller cell populations and potentially to a single mammalian cell. Application with ion trap MS/MS instrumentation allowed protein identification from 50 pg (total mass) of proteomic samples (i.e., approximately 100 times larger than FTICR MS), corresponding to a sensitivity of approximately 7 amol for individual proteins. Compared with single-stage FTICR measurements, ion trap MS/MS provided a much lower proteome measurement coverage and dynamic range for a given analysis time and sample quantity.

Amino Acid Sequence↗

Detection of green fluorescent protein in a single bacterium by capillary electrophoresis with laser-induced fluorescence.

Green fluorescence protein (GFP) is a common reporter used to monitor protein expression in single cells. However, autofluorescence from endogenous components can mask the signal from GFP, particularly at low expression levels in prokaryotes. We employ capillary electrophoresis with laser-induced fluorescence for the analysis of the expression of green fluorescent protein in a single bacterium. Capillary electrophoresis separates GFP from native cellular autofluorescent components, reducing the background signal and improving detection limits. Our system provides 100 ymol (60 copies) limits of detection for GFP. To demonstrate the performance of this instrument, we employ a model system of Deinococcus radiodurans that has been engineered to express GFP under the control of the recA promoter. We report resolution and detection of GFP and autofluorescent components in a single D. radiodurans bacterium. This paper presents the first example of expression of GFP in D. radiodurans and the first detection of GFP in a single bacterium by capillary electrophoresis.

Deinococcus↗

An alternating sheared AA pair and elements of stability for a single sheared purine-purine pair flanked by sheared GA pairs in RNA.

A previous NMR structure of the duplex 5'GGU GGA GGCU/PCCG AAG CCG5' revealed an unusually stable RNA internal loop with three consecutive sheared GA pairs. Here, we report NMR studies of two duplexes, 5'GGU GGA GGCU/PCCA AAG CCG5' (replacing the UG pair with a UA closing pair) and 5'GGU GAA GGCU/PCCG AAG CCG5' (replacing the middle GA pair with an AA pair). An unusually stable loop with three consecutive sheared GA pairs forms in the duplex 5'GGU GGA GGCU/PCCA AAG CCG5'. The structure contrasts with that reported for this loop in the crystal structure of the large ribosomal subunit of Deinococcus radiodurans [Harms, J., Schluenzen, F., Zarivach, R., Bashan, A., Gat, S., Agmon, I., Bartels, H., Franceschi, F., and Yonath, A. (2001) Cell 107, 679-688]. The middle AA pair in the duplex 5'GGU GAA GGCU/PCCG AAG CCG5' rapidly exchanges orientations, resulting in alternative base stacking and pseudosymmetry with exclusively sheared pairs. The U GAA G/G AAG C internal loop is 2.1 kcal/mol less stable than the U GGA G/G AAG C internal loop at 37 degrees C. Structural, energetic, and dynamic consequences upon functional group substitutions within related 3 x 3 and 3 x 6 internal loops are also reported.

Adenine↗

The NMR structure of an internal loop from 23S ribosomal RNA differs from its structure in crystals of 50s ribosomal subunits.

Internal loops play an important role in structure and folding of RNA and in recognition of RNA by other molecules such as proteins and ligands. An understanding of internal loops with propensities to form a particular structure will help predict RNA structure, recognition, and function. The structures of internal loops 5' 1009CUAAG1013 3'/3' 1168GAAGC1164 5' and 5' 998CUAAG1002 3'/3' 1157GAAGC1153 5' from helix 40 of the large subunit rRNA in Deinococcus radiodurans and Escherichia coli, respectively, are phylogenetically conserved, suggesting functional relevance. The energetics and NMR solution structure of the loop were determined in the duplex 5' 1GGCUAAGAC9 3'/3' 18CCGAAGCUG10 5'. The internal loop forms a different structure in solution and in the crystal structures of the ribosomal subunits. In particular, the crystal structures have a bulged out adenine at the equivalent of position A15 and a reverse Hoogsteen UA pair (trans Watson-Crick/Hoogsteen UA) at the equivalent of U4 and A14, whereas the solution structure has a single hydrogen bond UA pair (cis Watson-Crick/sugar edge A15U4) between U4 and A15 and a sheared AA pair (trans Hoogsteen/sugar edge A14A5) between A5 and A14. There is cross-strand stacking between A6 and A14 (A6/A14/A15 stacking pattern) in the NMR structure. All three structures have a sheared GA pair (trans Hoogsteen/sugar edge A6G13) at the equivalent of A6 and G13. The internal loop has contacts with ribosomal protein L20 and other parts of the RNA in the crystal structures. These contacts presumably provide the free energy to rearrange the base pairing in the loop. Evidently, molecular recognition of this internal loop involves induced fit binding, which could confer several advantages. The predicted thermodynamic stability of the loop agrees with the experimental value, even though the thermodynamic model assumes a Watson-Crick UA pair.

Deinococcus↗

Bionanofabrication of metallic and semiconductor nanoparticle arrays using S-layer protein lattices with different lateral spacings and geometries.

Two-dimensional (2-D) surface layer (S-layer) protein lattices isolated from the gram-positive bacterium Deinococcus radiodurans and the acidothermophilic archaeon Sulfolobus acidocaldarius were investigated and compared for their ability to biotemplate the formation of self-assembled, ordered arrays of inorganic nanoparticles (NPs). The NPs employed for these studies included citrate-capped gold NPs and various species of CdSe/ZnS core/shell quantum dots (QDs). The QD nanocrystals were functionalized with different types of thiol ligands (negative- or positive-charged/short- or long-chain length) in order to render them hydrophilic and thus water-soluble. Transmission electron microscopy, Fourier transform analyses, and pair correlation function calculations revealed that ordered nanostructured arrays with a range of spacings (approximately 7-22 nm) and different geometrical arrangements could be fabricated through the use of the two types of S-layers. These results demonstrate that it is possible to exploit the physicochemical/structural diversity of prokaryotic S-layer scaffolds to vary the morphological patterning of nanoscale metallic and semiconductor NP arrays.

Cadmium Compounds↗

Electrochemical nanofabrication using crystalline protein masks.

We have developed a simple and robust method to fabricate nanoarrays of metals and metal oxides over macroscopic substrates using the crystalline surface layer (S-layer) protein of Deinococcus radiodurans as an electrodeposition mask. Substrates are coated by adsorption of the S-layer from a detergent-stabilized aqueous protein extract, producing insulating masks with 2-3 nm diameter solvent-accessible openings to the deposition substrate. The coating process can be controlled to achieve complete or fractional surface coverage. We demonstrate the general applicability of the technique by forming arrays of cuprous oxide (Cu(2)O), Ni, Pt, Pd, and Co exhibiting long-range order with the 18 nm hexagonal periodicity of the protein openings. This protein-based approach to electrochemical nanofabrication should permit the creation of a wide variety of two-dimensional inorganic structures.

Bacterial Proteins↗

Enrichment of integral membrane proteins for proteomic analysis using liquid chromatography-tandem mass spectrometry.

An increasing number of proteomic strategies rely on liquid chromatography-tandem mass spectrometry (LC-MS/MS) to detect and identify constituent peptides of enzymatically digested proteins obtained from various organisms and cell types. However, sample preparation methods for isolating membrane proteins typically involve the use of detergents and chaotropes that often interfere with chromatographic separation and/or electrospray ionization. To address this problem, a sample preparation method combining carbonate extraction, surfactant-free organic solvent-assisted solubilization, and proteolysis was developed and demonstrated to target the membrane subproteome of Deinococcus radiodurans. Out of 503 proteins identified, 135 were recognized as hydrophobic on the basis of their calculated hydropathy values (GRAVY index), corresponding to coverage of 15% of the predicted hydrophobic proteome. Using the PSORT algorithm, 53 of the proteins identified were classified as integral outer membrane proteins and 215 were classified as integral cytoplasmic membrane proteins. All identified integral cytoplasmic membrane proteins had from 1 to 16 mapped transmembrane domains (TMDs), and 65% of those containing four or more mapped TMDs were identified by at least one hydrophobic membrane spanning peptide. The extensive coverage of the membrane subproteome (24%) by identification of highly hydrophobic proteins containing multiple TMDs validates the efficacy of the described sample preparation technique to isolate and solubilize hydrophobic integral membrane proteins from complex protein mixtures.

Amino Acid Sequence↗

Affinity labeling of highly hydrophobic integral membrane proteins for proteome-wide analysis.

The ability to identify and quantitate integral membrane proteins is an analytical challenge for mass spectrometry-based proteomics. The use of surfactants to solubilize and facilitate derivatization of these proteins can suppress peptide ionization and interfere with chromatographic separations during microcapillary reversed-phase liquid chromatography-electrospray-tandem mass spectrometry. To circumvent the use of surfactants and increase proteome coverage, an affinity labeling method has been developed to target highly hydrophobic integral membrane proteins using organic-assisted extraction and solubilization followed by cysteinyl-specific labeling using biotinylation reagents. As demonstrated on the membrane subproteome of Deinococcus radiodurans, specific and quantitative labeling of integral membrane proteins was achieved using a 60% methanol-aqueous buffer system and (+)-biotinyl-iodoacetamidyl-3,6-dioxaoctanediamine as the cysteinyl-alkylating reagent. From a total of 220 unique Cys-labeled peptides, 89 proteins were identified, of which 40 were integral membrane proteins containing from one to nine mapped transmembrane domains with a maximum positive GRAVY of 1.08. The protocol described can be used with other stable isotope labeling reagents (e.g., ICAT) to enable comparative measurements to be made on differentially expressed hydrophobic membrane proteins from various organisms (e.g., pathogenic bacteria) and cell types and provide a viable method for comparative proteome-wide analyses.

Affinity Labels↗

Normalization approaches for removing systematic biases associated with mass spectrometry and label-free proteomics.

Central tendency, linear regression, locally weighted regression, and quantile techniques were investigated for normalization of peptide abundance measurements obtained from high-throughput liquid chromatography-Fourier transform ion cyclotron resonance mass spectrometry (LC-FTICR MS). Arbitrary abundances of peptides were obtained from three sample sets, including a standard protein sample, two Deinococcus radiodurans samples taken from different growth phases, and two mouse striatum samples from control and methamphetamine-stressed mice (strain C57BL/6). The selected normalization techniques were evaluated in both the absence and presence of biological variability by estimating extraneous variability prior to and following normalization. Prior to normalization, replicate runs from each sample set were observed to be statistically different, while following normalization replicate runs were no longer statistically different. Although all techniques reduced systematic bias to some degree, assigned ranks among the techniques revealed that for most LC-FTICR-MS analyses linear regression normalization ranked either first or second. However, the lack of a definitive trend among the techniques suggested the need for additional investigation into adapting normalization approaches for label-free proteomics. Nevertheless, this study serves as an important step for evaluating approaches that address systematic biases related to relative quantification and label-free proteomics.

Animals↗

A light-sensing knot revealed by the structure of the chromophore-binding domain of phytochrome.

Phytochromes are red/far-red light photoreceptors that direct photosensory responses across the bacterial, fungal and plant kingdoms. These include photosynthetic potential and pigmentation in bacteria as well as chloroplast development and photomorphogenesis in plants. Phytochromes consist of an amino-terminal region that covalently binds a single bilin chromophore, followed by a carboxy-terminal dimerization domain that often transmits the light signal through a histidine kinase relay. Here we describe the three-dimensional structure of the chromophore-binding domain of Deinococcus radiodurans phytochrome assembled with its chromophore biliverdin in the Pr ground state. Our model, refined to 2.5 A resolution, reaffirms Cys 24 as the chromophore attachment site, locates key amino acids that form a solvent-shielded bilin-binding pocket, and reveals an unusually formed deep trefoil knot that stabilizes this region. The structure provides the first three-dimensional glimpse into the photochromic behaviour of these photoreceptors and helps to explain the evolution of higher plant phytochromes from prokaryotic precursors.

Bile Pigments↗

Structure and activity of an aminoacyl-tRNA synthetase that charges tRNA with nitro-tryptophan.

The most divergent of two tryptophanyl tRNA synthetases (TrpRS II) found in Deinococcus radiodurans interacts with a nitric oxide synthase protein that produces 4-nitro-tryptophan (4-NRP). TrpRS II efficiently charges transfer RNA(Trp) with 4-NRP and 5-hydroxy-tryptophan (5-HRP). The crystal structures of TrpRS II bound to tryptophan and 5-HRP reveal residue substitutions that accommodate modified indoles. A class of auxiliary bacterial TrpRSs conserve this capacity to charge tRNA with nonstandard amino acids.

5-Hydroxytryptophan↗

Ring-shaped architecture of RecR: implications for its role in homologous recombinational DNA repair.

RecR, together with RecF and RecO, facilitates RecA loading in the RecF pathway of homologous recombinational DNA repair in procaryotes. The human Rad52 protein is a functional counterpart of RecFOR. We present here the crystal structure of RecR from Deinococcus radiodurans (DR RecR). A monomer of DR RecR has a two-domain structure: the N-terminal domain with a helix-hairpin-helix (HhH) motif and the C-terminal domain with a Cys4 zinc-finger motif, a Toprim domain and a Walker B motif. Four such monomers form a ring-shaped tetramer of 222 symmetry with a central hole of 30-35 angstroms diameter. In the crystal, two tetramers are concatenated, implying that the RecR tetramer is capable of opening and closing. We also show that DR RecR binds to both dsDNA and ssDNA, and that its HhH motif is essential for DNA binding.

Amino Acid Sequence↗

X-ray crystallography study on ribosome recycling: the mechanism of binding and action of RRF on the 50S ribosomal subunit.

This study presents the crystal structure of domain I of the Escherichia coli ribosome recycling factor (RRF) bound to the Deinococcus radiodurans 50S subunit. The orientation of RRF is consistent with the position determined on a 70S-RRF complex by cryoelectron microscopy (cryo-EM). Alignment, however, requires a rotation of 7 degrees and a shift of the cryo-EM RRF by a complete turn of an alpha-helix, redefining the contacts established with ribosomal components. At 3.3 A resolution, RRF is seen to interact exclusively with ribosomal elements associated with tRNA binding and/or translocation. Furthermore, these results now provide a high-resolution structural description of the conformational changes that were suspected to occur on the 70S-RRF complex, which has implications for the synergistic action of RRF with elongation factor G (EF-G). Specifically, the tip of the universal bridge element H69 is shifted by 20 A toward h44 of the 30S subunit, suggesting that RRF primes the intersubunit bridge B2a for the action of EF-G. Collectively, our data enable a model to be proposed for the dual action of EF-G and RRF during ribosome recycling.

Amino Acid Sequence↗