Search PubMed⌕ Search

SEARCH · Search PubMed

Results for “STEAM”

Search indexed PubMed citations on genomics, clinical trials, systematic reviews and public health. Explore titles, authors and supplied subject terms, then open the PubMed record.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 289 records · Page 16Linked to original sources

Response of metabolites with coupled spins to the STEAM sequence.

This article demonstrates that a numerical solution of the full quantum mechanical equations for all metabolites with coupled spins is an efficient and accurate means, first, of predicting the optimum STEAM sequence design for quantifying any target metabolite in brain, and, second, for providing the basis lineshapes and yields of these metabolites to facilitate their accurate quantification. Using as illustrations the weakly coupled AX3 system of lactate, the ABX aspartyl group of N-acetylaspartate, which has only two strongly coupled spins, and the much larger strongly coupled AMNPQ glutamyl group of glutamate, the numerical solutions for the response to STEAM highlight the principal source of response variability, namely, the evolution of and transfer between zero quantum terms during the mixing time, TM. These highlights include the rapid oscillations of zero quantum terms due to the chemical shift difference of the coupled spins, the proliferation of oscillating zero order terms due to strong coupling, and the serendipitous smoothing of the response as the number of strongly coupled spins increases. The numerical solutions also demonstrate that the design of the selective 90 degrees pulses is a far less critical factor in determining the response than was the case for the selective 180 degrees pulses of the PRESS sequence (Thompson and Allen, Magn Reson Med 1999;41:1162-1169). The veracity of the method is demonstrated both in phantom solutions and in the parietal lobe of a normal human brain.

Aspartic Acid↗

Diffusion imaging of the human brain in vivo using high-speed STEAM MRI.

This paper describes a new method for diffusion imaging of the human brain in vivo that is based on a combination of diffusion-encoding gradients with high-speed STEAM MR imaging. The single-shot sequence 90 degrees-TE/2-90 degrees-TM-(alpha-TE/2-STE)n generates n = 32-64 differently phase-encoded stimulated echoes STE yielding image acquisition times of 576 ms for a 48 x 128 data matrix. Diffusion encoding is performed during the first TE/2-interval as well as during each readout period. Phantom studies reveal a quantitative agreement of calculated diffusion coefficients with literature values. EKG triggering completely eliminates motion artifacts from diffusion-weighted single-shot STEAM images of human brain in vivo. While signal attenuation of the cerebrospinal fluid (CSF) is predominantly due to flow, that observed for gray and white matter results from diffusion. Evaluated diffusion coefficients yield (1.0 +/- 0.1) x 10(-5) cm2 s-1 for gray matter, (0.5 +/- 0.1) x 10(-5) cm2 s-1 for white matter with the diffusion encoding parallel to the main orientation of the myelin sheath of the neurofibrils, and (0.3 +/- 0.1) x 10(-5) cm2 s-1 for white matter and a perpendicular orientation. All studies were performed at 2.0 T using a conventional 10 mT m-1 gradient system.

Brain↗

Localized proton MR spectroscopy of the human kidney in vivo by means of short echo time STEAM sequences.

In order to obtain proton magnetic resonance spectra from the normal human kidney in vivo, we employed a STEAM sequence with delay times TE = 10 ms and TM = 30 ms. Signals are attenuated during STEAM sequences by J-coupling effects and by macroscopic movement of the sample. The combination of short echo times and respiratory triggering ensured that the kidney was stationary during the pulse sequence, and allowed us to detect strongly coupled resonances between 3 and 4.2 ppm. Analysis of spectra of extracts of bovine kidneys suggested that the renal MR-visible metabolites could include the osmolytes betaine, myo-inositol, and glycerophosphocholine. Four volunteers were subjected to overnight dehydration followed by rehydration, and we found that these signals increased significantly after dehydration, and decreased significantly 4 h after rehydration, thus supporting the assignment of the resonances as osmotically active metabolites.

Adult↗

Variability of metabolite yield using STEAM or PRESS sequences in vivo at 3.0 T, illustrated with myo-inositol.

Using as an example the myo-inositol (mI) band at approximately 3.6 ppm in the proton spectrum from brain, an evaluation is presented that highlights the difficulties of quantifying metabolites with strongly coupled spins with either STEAM or PRESS and demonstrates some advantages of prospective sequence analysis when measuring their concentrations. The analysis emphasizes the variation in coupled-spin signal yield and lineshape, compared with that of uncoupled singlets such as N-acetylaspartate, a variation that differs from one metabolite spin system to another. This difference in variation between a target metabolite (e.g., mI) and its contaminating background metabolites (e.g., glutamate and taurine, etc.) is shown to provide in certain circumstances a substantial reduction in background contamination (both metabolite and macromolecule) while maintaining sufficient signal-to-noise ratio for precise quantification. For example, sequence times are demonstrated, both for STEAM and for PRESS, that, relative to the short echo-time sequences typical in the literature, enhance the signal to metabolite background of the 3.6-ppm band of mI by factors of 1.7 and 1.3, respectively, essentially eliminate the macromolecular baseline, and yet in vivo retain an S/N approximately 10 in both cases.

Brain↗

Diffusion tensor imaging using partial Fourier STEAM MRI with projection onto convex subsets reconstruction.

Diffusion-weighted single-shot STEAM MRI allows for diffusion mapping of the human brain without sensitivity to resonance offset effects. In order to compensate for its inherently lower SNR and speed than echo-planar imaging, this work describes the use of partial Fourier encoding in combination with image reconstruction by the projection onto convex subsets algorithm. The method overcomes phase distortions in diffusion-weighted partial Fourier acquisitions that disturb the conjugate complex symmetry of k-space and preclude the use of respective reconstruction techniques. In comparison with full Fourier encoding and a static flip angle for the STEAM readout pulses, experimental results at 2.9 T demonstrate a gain in relative SNR per unit time by 20% for 5/8 phase encoding with optimized variable flip angles. Simultaneously, the imaging time is reduced from about 670 ms (80 echoes) to 440 ms (50 echoes). Current implementations at 2 x 2 mm2 in-plane resolution comprise a protocol for clinical anisotropy studies (12 diffusion-encoding gradient directions at 1000 s mm(-2)) covering 18 sections of 4-mm thickness within a measurement time of 8.5 min (5 averages) and a version optimized for fiber tracking using 24 gradient directions and 38 sections of 2-mm thickness yielding a measurement time of 29.5 min (4 averages).

Anisotropy↗

Flip angle effects in STEAM and PRESS-optimized versus sinc RF pulses.

Flip angle dependence of the localized single-voxel 1H NMR spectroscopic sequences STEAM and PRESS using numerically optimized Shinnar-Le Roux (SLR) and conventional sinc RF pulses has been evaluated. Phantom experiments were used to evaluate voxel profiles from MR images of the selected voxels. Information on the total excited volume was recorded from the integrated area under the water peak in the localized spectrum at different flip angles (theta = 0 degrees-180 degrees). The voxel profiles for both the STEAM and PRESS sequences using the SLR RF pulses were found to be identical, unlike the case for the sinc RF pulses. The SLR RF pulses in the PRESS sequence were found to be more sensitive to flip angle variations. Localized, water-suppressed 1H NMR spectra recorded from the frontal gray matter in healthy volunteers (n = 3) showed less lipid contamination using the SLR RF pulses compared with the sinc RF pulses.

Area Under Curve↗

Chemical composition and organoleptic evaluation of juice from steamed cashew apple blended with orange juice.

Fully riped cashew apples (yellow variety) were steamed for 7 minutes prior to juice extraction. The extracted juice was blended with various proportions of sweet orange juice. Chemical composition and organoleptic evaluation were carried out on both the blended and unblended juices. The ascorbic acid content of unsteamed cashew apple juice was 287 mg/100 ml. Steaming of the cashew apple prior to juice extraction resulted in a decreased (230 mg/100 ml) content of ascorbic acid. It also led to slight decreases in soluble solids and titratable acidity. A comparison of the chemical composition of the two juices showed that the orange juice contained more sugars, titratable acidity and soluble solids but less ascorbic acid than cashew apple juice. Consequently, the soluble solids, titratable acidity, reducing and total sugars of the blends increased with increase in the proportions of orange juice while the content of ascorbic acid was decreasing. In spite of the decrease in ascorbic acid content of the blends, results showed that blended juice would no doubt be a very good source of ascorbic acid. Result of the organoleptic evaluation revealed that a 60% cashew apple and 40% orange juice gave a good quality juice in terms of flavor, after taste and overall acceptability.

Ascorbic Acid↗

Steam locomotive ergonomics.

A retrospective study of some of the ergonomic factors of the man/machine interface of the steam locomotive of the 19th century. Reference is made to the dominance of mechanical requirements over human engineering factors, to the perceptual task of drivers, and to the specialised form of the machine and its control position. Examples are given of the application of some ergonomics to control position design in the 20th century, and the present day 'non-steam' control positions are described so as to form comparisons with the 19th century control position practices.

Journal Article↗

Dynamic changes of lung lymph flow and the release of lysosomal enzyme from the lungs after severe steam inhalation injury in goats.

Chronic lung lymph fistulae were produced in six goats according to Winn's and Stothert's methods with our modification to define the pathophysiology of pulmonary oedema after severe steam inhalation injury. Arterial blood gas, lung lymph flow (QLym), lymph/plasma total protein concentration ratio (L/P), and beta-glucuronidase (beta-G) in plasma and lung lymph were monitored for 24 h post-injury. The pathological changes in the lung tissues were also determined at the end of the study. It was found that directly after injury, QLym increased steadily to a peak value at 6 h, followed by declining values at 18 and 24 h. L/P decreased promptly during the 60 min after injury and then also steadily increased to a peak value at 4 h (P less than 0.05). A significant increase in plasma beta-G was only observed at 4 h post-burn. However, lung lymph beta-G activities and lymph beta-G transport increased immediately after injury, reaching a peak at 4 h (5 and 12 times above baseline values, respectively, P less than 0.01). Significant hypoxaemia and hypocapnia occurred at 2 h post-burn and deteriorated progressively throughout the study. There were obvious pulmonary interstitial and alveolar oedema microscopically. This study demonstrates that the increase in transvascular fluid and protein flux after steam inhalation injury is mainly due to increased pulmonary microvascular permeability. Nevertheless, a hydrostatic pressure effect can not be completely excluded, especially in the first hour post-burn. Lysosomal enzyme release is considered to be one of the important factors which damage lung microvascular elements and induce an increase in their permeability.

Animals↗

Proton spectroscopy of human stroke: assessment of transverse relaxation times and partial volume effects in single volume steam MRS.

Proton T2 relaxation times were measured in 13 stroke patients and 13 aged-matched normal subjects at 2.1 T. Spectra were acquired from an 8-cc volume using the STEAM sequence with echo times (TE) of 30.4 ms and 270.0 ms and repetition time of 2.8 s. Transverse relaxation times were estimated using two-point calculations. Percentage volume of infarct in the STEAM voxel was measured on spin-echo MRI encompassing the infarct and correlated with the peak amplitude of N-acetylated compounds (NA). T2 values of NA, creatine, and choline resonances showed no significant difference between patients and controls. T2 for lactate in patients was 780 +/- 257 ms, respectively (mean +/- SE, n = 7). In stroke patients, high inverse correlation was found between the absolute NA signal and partial volume of normal brain contributing to each spectrum (p < .001, r = 0.97). Together with unchanged T2, this suggests that NAA largely disappears from infarcted tissue within 24 hr postinfarct.

Aged↗

Application of heat- and steam-generating sheets to the lumbar or abdominal region affects autonomic nerve activity.

Effects of applying a heat- and steam-generating (HSG) sheet on peripheral hemodynamics and autonomic nerve activity were examined. An HSG sheet was applied to the lumbar or abdominal region. Measurements included skin temperature at the lumbar and abdominal regions and the fingertip, total hemoglobin, tissue oxygen saturation ratio (StO2), pupillary light reflex, changes in ECG R-R interval blood pressure and percutaneous electrogastrography (EGG). A heat-generating sheet without steam was used as the control. Based on the present findings, application of the HSG sheet to the lumbar or abdominal region may improve peripheral hemodynamics and inhibit sympathetic nerve activity, resulting in parasympathetic nerve activity dominance.

Abdomen↗

High-field diffusion tensor imaging of mouse brain in vivo using single-shot STEAM MRI.

Information about the microstructural organization of cerebral white matter that is accessible by magnetic resonance diffusion tensor imaging (DTI) gains increasing importance for studies of animal brain. Particular challenges occur for in vivo conditions as well as at high magnetic fields. Here, we have employed a diffusion-weighted (DW) single-shot STEAM MRI sequence for DTI of mouse brain in vivo at 7 T. The approach exploits the increased longitudinal magnetization and prolonged T1 relaxation times of water protons at higher magnetic field strengths without suffering from susceptibility-induced artifacts. When compared to studies at 2.35 T, half Fourier DW STEAM MRI at 7 T yielded a substantial gain in signal-to-noise ratio (SNR) that could be invested either in a reduction of the measurement time or an increase of the spatial resolution. Thus, for a measurement time of 3h, DTI with a voxel size of 117 microm x 117 microm x 720 microm not only resulted in high-quality maps of the fractional anisotropy and main diffusion direction (MDD), but also allowed for fiber tracking of major mouse brain structures in vivo.

Animals↗

Preparation of mesoporous carbon from commercial activated carbon with steam activation in the presence of cerium oxide.

Mesoporous carbon was prepared from the commercial activated carbon by steam activation with cerium oxide as catalyst. Steam activation with a catalyst loading of 0.5-2.0 wt% at 680-870 degrees C was examined. The surface area and pore size were evaluated by nitrogen adsorption at 77 K, and the structure of cerium oxide was characterized by XRD, XPS, and TEM. The results showed that the catalyst promoted the development of a mesopore at lower temperature (680-740 degrees C), and the mesopore was concentrated around 4-10 nm. The noncatalytic activation was advantageous in mesopore development and the catalyst would restrict the formation of mesopores at high temperature (800-870 degrees C). Higher loading of cerium oxide and higher activation temperature caused the aggregation of cerium oxide and then resulted in scattered pore size distribution.

Journal Article↗

Combined steam distillation and electrochemical peroxidation (ECP) treatment of river sediment contaminated by PCBs.

A combined treatment process utilizing steam distillation followed by electrochemical peroxidation (ECP) has been utilized to remove >90% of the polychlorinated biphenyls (PCBs) in St. Lawrence River sediment and destroy 95% of the PCBs recovered in the condensate. 2 l of condensate were collected by boiling 500 grams of sediment containing approximately 4.3 mg PCBs. Most of the PCBs (82.3%) were recovered as a small volume (<1 ml) of yellow oil floating on the condensate and coating glassware surfaces. The aqueous phase PCBs (182 microg/l) were destroyed (95%) by three sequential ECP treatments at 16.8 degrees C and pH 5, utilizing 1 ml of H2O2 (3%) and periodically reversed current (0.75-1.0 A @ 10 volts). Oxidation is primarily mediated by hydroxyl radicals produced by the reaction of hydrogen peroxide with electrochemically generated ferrous iron (Fenton's reagent). This work suggests steam extraction, in combination with advanced oxidation technologies, provides an effective treatment strategy for contaminated solids.

Electrochemistry↗

Adaptation and validation of a portable steam sterilizer for processing intrauterine device insertion instruments and supplies in low-resource settings.

BACKGROUND: Difficulties with adequately processing intrauterine device (IUD) insertion instruments and supplies have led to use of potentially contaminated items, compromising the quality and safety of IUD insertion services in Bangladesh. A sterilization process for IUD insertion instruments and supplies by using a commercially available portable steam sterilizer was developed and validated. METHODS: Racks provided with the sterilizer were used during sterilization of wrapped supplies (gloves and cotton balls). Metal compartments to hold insertion instruments were built to fit into the sterilizer. After sterilization, supplies were transported to rural service sites in plastic bags, whereas instruments remained in the sterilizer, which was transported in a carrying case. To validate the sterilizer, laboratory testing was conducted by using chemical and biologic indicators for steam sterilization and field testing in Bangladesh with chemical indicators. RESULTS: Results indicated that sterilization cycles were effective in achieving sterility of IUD insertion supplies and instruments at sterility assurance levels of 10(-5) and 10(-6), respectively. CONCLUSIONS: Use of this sterilizer for IUD insertion supplies and instruments will improve the quality of service delivery in the Bangladesh family-planning program and has application for use in many other low-resource settings.

Bangladesh↗

Vapor-liquid activity coefficients for methanol and ethanol from heat of solution data: application to steam-methane reforming.

This paper presents equations and curves to calculate vapor-liquid phase equilibria for methanol and ethanol in dilute aqueous solution as a function of temperature, using activity coefficients at infinite dilution. These thermodynamic functions were originally derived to assess the distribution of by-product contaminants in the process condensate and the steam-system deaerator of a hydrogen plant [Paper ENV-00-171 presented at the NPRA 2000 Environmental Conference, San Antonio, TX, 10-12 September 2000], but have general applicability to other systems as well. The functions and calculation method described here are a necessary piece of an overall prediction technique to estimate atmospheric emissions from the deaerator-vent when the process condensate is recycled as boiler feed water (BFW) make-up. Having such an estimation technique is of particular significance at this time because deaerator-vent emissions are already coming under regulatory scrutiny in California [Emissions from Hydrogen Plant Process Vents, Adopted 21 January 2000] followed closely elsewhere in the US, and eventually worldwide. The overall technique will enable a permit applicant to estimate environmental emissions to comply with upcoming regulations, and a regulatory agency to evaluate those estimates. It may also be useful to process engineers as a tool to estimate contaminant concentrations and flow rates in internal process streams such as the steam-generating system. Metallurgists and corrosion engineers might be able to use the results for materials selection.

Air Pollutants↗

Biomass steam gasification--an extensive parametric modeling study.

A model for steam gasification of biomass was developed by applying thermodynamic equilibrium calculations. With this model, the simulation of a decentralized combined heat and power station based on a dual fluidized-bed steam gasifier was carried out. Fuel composition (ultimate analysis and moisture content) and the operating parameters, temperature and amount of gasification agent, were varied over a wide range. Their influences on amount, composition, and heating value of product gas and process efficiencies were evaluated. It was shown that the accuracy of an equilibrium model for the gas composition is sufficient for thermodynamic considerations. Net electric efficiency of about 20% can be expected with a rather simple process. Sensitivity analysis showed that gasification temperature and fuel oxygen content were the most significant parameters determining the chemical efficiency of the gasification.

Bioelectric Energy Sources↗

Effect of steam pressure treatment on the physicochemical properties of Dioscorea starches.

Dioscorea alata and Dioscorea rotundata starches were subjected to steam pressure treatments (0.35, 0.7, and 1.05 kg cm(-)(2)) for different periods. The total amylose content in the treated starches was not significantly affected, but the soluble amylose content decreased 3-5-fold. Reducing values and lambda(max) of the iodine complexes were unaffected. Viscosity of the starch paste was reduced by the treatments, and at higher pressures and longer time of treatments, the peak viscosity values were reduced to very low values. Pasting temperatures were enhanced considerably. Swelling volumes underwent reduction, but no change in solubility occurred. Clarity and paste stability were markedly lowered. The results suggest that starch granules are compressed by the steam pressure treatment, leading to vast changes in physicochemical properties.

Amylose↗