Search PubMed⌕ Search

SEARCH · Search PubMed

Results for “SILICA”

Search indexed PubMed citations on genomics, clinical trials, systematic reviews and public health. Explore titles, authors and supplied subject terms, then open the PubMed record.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 289 records · Page 16Linked to original sources
PubMed2004

Structure of colloid silica determined by viscosity measurements.

The viscosity of nanosized colloid silica suspensions, used as binders in the investment casting, was determined as a function of their weight fraction reaching 52%. A new capillary viscometer was used whose construction eliminated sedimentation effects. The experiments have been carried out at fixed pH 10.0 and controlled ionic strength. It was found that for a low silica concentration range (weight fraction below 5%) the suspension viscosity increased more rapidly than the Einstein theory predicts. This anomalous behavior could not be explained in terms of the primary electroviscous effect predicted to be a few orders of magnitude smaller as observed. This discrepancy was accounted for by postulating a fuzzy, gel-like structure of colloid silicas used in our experiments. Hence, the apparent hydrodynamic radius of silica particles in aqueous suspensions was found to be larger than the primary particle size in accordance with previous observations. Based on this postulate, an apparent density of the silica sols was found to be 1.32-1.37 g/cm(3) instead of 2.2-2.32 g/cm(3) as determined from the suspension dilution method. This behavior was interpreted in terms of the core/shell model with high shell porosity, reaching 85%. Similarly, for higher concentration ranges, silica viscosity increased more rapidly with increased sol concentration than predicted by the Batchelor model derived for hard particles. The deviation was attributed to the secondary electroviscous effect stemming from the electrostatic interactions among silica particles in sheared suspensions. This effect has quantitatively been interpreted in terms of Russel's theory. On the other hand, for the high concentration range the experimental results were well accounted for by the Dougherty-Krieger model. By exploiting our experimental findings a sensitive method of determining the structure and apparent density of silica sols in aqueous media was proposed.

Journal Article↗
PubMed2005

Synthesis and characterization of iron oxide-coated silica and its effect on metal adsorption.

To accurately model metal mobility and bioavailability in soils and sediments, systematic adsorption studies are needed in considering heterogeneous, well characterized minerals. Two important surfaces are iron oxide and silica, which are ubiquitous and associated with one another in the environment playing important roles in metal distribution. This study focuses on the synthesis and characterization of such a system, iron oxide-coated silica. A three-level fractional factorial study was used to determine the optimum conditions for producing goethite-coated silica. The amount of coating achieved was between 0.59 and 21.36 mg Fe g(-1) solid. The most significant factor in coating using either adsorption or precipitation was the particle size of silica, where Fe increased from an average of 0.85 to 9.6 mg Fe g(-1) solid as silica size decreased from 1.5 to 0.2 mm. Other factors investigated, including coating temperature, initial iron concentration, and contact time, were of less importance. The iron oxide coatings were observed to be non-uniform, concentrated in rough concave areas. FTIR revealed a band shift as well as a new band indicating changes in the chemical environment of FeO and SiO bonds; these results along with abrasion studies suggest that the interaction between the oxide coating and silica surface potentially involves chemical forces. Because the nano-sized iron oxide coatings increased surface area, introduced small pores, and changed the surface charge distribution of silica, the coated system demonstrates a greater affinity for Ni compared to that of uncoated silica.

Adsorption↗
PubMed2005

Effect of drying on the mesoporous structure of sol-gel derived silica with PPO-PEO-PPO template block copolymer.

The effects of drying method on the pore structure of mesoporous silica were studied from the viewpoint of enhancing closed porosity in mesoporous silica. The mesoporous silica was prepared via a sol-gel process using polyethyleneoxide-polypropyleneoxide-polyethyleneoxide (PEO-PPO-PEO) triblock copolymer (Pluronic P123) as the structure-directing template. The closed porosity was evaluated from the apparent mass density of the sample measured by a helium pycnometer. These mesoporous silicas were also characterized by transmission electron microscopy (TEM), thermogravimetric analysis (TGA), and nitrogen adsorption. The drying method was shown to be responsible for the finally templated mesoporous structure of the silica. More rapid drying is more preferable for enhancing the closed porosity of the mesoporous silica. The closed pores were formed by immediate immobilization of copolymer molecular assemblies in the silica matrix due to the instant removal of the solvent and solidification at higher temperatures. The drying method, mainly affecting the drying rate, is highly influential on the finally replicated mesoporous structure in silica.

Journal Article↗
PubMed2005

A simple and controlled method of preparing uniform Ag midnanoparticles on Tollens-soaked silica spheres.

Ag midnanoparticles (midnanoparticles are those particles whose diameters are in the range from 20 to 80 nm) with average size of 30-50 nm and tunable packing densities were formed on the surface of preformed Tollens-soaked silica spheres by a simple and controlled method. The process mainly involved two steps. In the first step the absorption of Ag(NH3)2(+) ions occurred on the silica spheres and in the second step Ag(NH3)2(+) ions on the silica spheres were reduced to Ag midnanoparticles in the presence of glucose solution. The amount of Ag midnanoparticles on the silica spheres could easily be tuned by varying the washing times in the process of preparing the Tollens-soaked silica spheres. The washing process also effectively avoided the reduction of Ag(NH3)2(+) ions and the nucleation of Ag particles in solution and easily produced more uniform Ag midnanoparticles on the silica spheres. Attributing to the uniform Ag midnanoparticles, the Ag midnanoparticle-coated silica spheres show unique optical properties in the UV-vis absorption spectra. The resulting Ag midnanoparticle-coated silica spheres were characterized with transmission electron microscopy, UV-vis-IR recording spectrophotometry, and X-ray photoelectron spectroscopy.

Journal Article↗
PubMed2005

The effect of silica on the degradation of organohalides in granular iron columns.

Dissolved silica species are naturally occurring, ubiquitous groundwater constituents with corrosion-inhibiting properties. Their influence on the performance and longevity of iron-based permeable reactive barriers for treatment of organohalides was investigated through long-term column studies using Connelly iron as the reactive medium. Addition of dissolved silica (0.5 mM) to the column feed solution led to a reduction in iron reactivity of 65% for trichloroethylene (TCE), 74% for 1,1,2-trichloroethane (1,1,2-TCA), and 93% for 1,1,1-trichloroethane (1,1,1-TCA), compared to columns operated under silica-free conditions. Even though silica adsorption was a gradual process, the inhibitory effect was evident within the first week, with subsequent decreases in reactivity over 288 days being relatively minor. Lower concentrations of dissolved silica species (0.2 mM) led to a lesser decrease (70%) in iron reactivity toward 1,1,1-TCA. The presence of dissolved silica species produced a shift in TCE product distribution toward the more highly chlorinated product cis-dichloroethylene (cis-DCE), although it did not appear to alter products originating from the trichloroethanes. The major corrosion products identified were magnetite (Fe3O4) or maghemite (gamma-Fe2O3) and carbonate green rust ([Fe4(2+)Fe(2)3+(OH)12][CO(3).2H2O]). Iron carbonate hydroxide (Fe(II)1.8Fe(III)0.2(OH)2.2CO3) was only found in the silica-free column, indicating that silica may hinder its formation. A comparison with columns operated under the same conditions, but using Master Builder iron as the reactive matrix, showed that Connelly iron is initially less reactive, but performs better than Master Builder iron over 288 days.

Adsorption↗
PubMed2005

Increase in a distinct pulmonary macrophage subset possessing an antigen-presenting cell phenotype and in vitro APC activity following silica exposure.

Silica inhalation results in chronic lung inflammation and fibrosis. While the role of the alveolar macrophage (AM) is considered key to the effects of silica on lung pathology, the etiology is not completely understood. Evidence suggests an increase in antigen presenting cell (APC) activity as a contributing factor to this process, as well as potential roles for both AM and interstitial macrophages (IM) in silicosis. In order to study the effects of crystalline silica on the APC activity of pulmonary macrophages, mice were exposed intranasally and changes in pulmonary macrophage populations were assessed using flow cytometry. Following intranasal instillation of silica, a significant increase in the APC activity of AM was observed, as well as a significant increase in a subset of IM expressing classic APC markers (MHC class II, CD11c). In addition, an in vitro system using bone marrow-derived macrophages (BMDM) was generated to assess the effects of silica on the APC activity of macrophages in vitro. Data using BMDM in the in vitro APC assay demonstrated a significant increase in APC activity following silica exposure, but not following exposure to saline or a control particle (TiO(2)). Using a combination of in vivo and in vitro experiments, the current study describes a significant increase in an interstitial macrophage subset with an APC phenotype, as well as an increase in the APC activity of both AM and BMDM, as a direct result of exposure to crystalline silica. These studies suggest a specific mechanism, macrophage subset activation, by which crystalline silica exposure results in chronic pulmonary inflammation and, eventually, fibrosis.

Animals↗
PubMed2006

Mechanisms of silica-induced IL-8 release from A549 cells: initial kinase-activation does not require EGFR activation or particle uptake.

Understanding how mineral particles trigger cellular responses is crucial in order to elucidate what characteristics determine their harmful effects. It is not clear whether cellular effects are triggered through the cell membrane or require particle uptake. However, studies with asbestos suggest that activation of the epidermal growth factor receptor (EGFR) may be important. We have previously reported that crystalline silica-induced interleukin (IL)-8 release from human lung epithelial cells (A549) was regulated through Src family kinases (SFKs) and the mitogen-activated protein kinases (MAPKs) p38 and extracellular signal-regulated kinase (ERK)-1 and -2. The present study shows that SFK and p38 phosphorylation increased almost immediately upon crystalline silica exposure, whereas ERK1/2 phosphorylation increased after 10 min of exposure. The p38 inhibitor SB202190 increased the silica-induced ERK1/2 phosphorylation suggesting that p38 activity may attenuate activation of ERK1/2. Scanning electron microscopy showed that some silica particles were phagocytosed between 1 and 4h of exposure, but that the majority remained bound by microvilli on the cell surface. The EGFR inhibitor AG1478 attenuated both silica-induced IL-8 release and phosphorylation of SFKs and ERK1/2. However, AG1478 also inhibited the respective background levels, and the EGFR was not phosphorylated at the onset of silica exposure. The results suggest that crystalline silica triggers p38 and SFK-ERK1/2 signaling through interactions with membrane components as both pathways were rapidly activated prior to particle internalization. However, the silica-induced up-regulation of IL-8 release through the SFK-ERK1/2 pathway does not appear to be initiated through activation of the EGFR, although basal EGFR activity may affect the magnitude of the responses.

Cell Line↗
PubMed2001

Application of zirconium-modified silica gel as a stationary phase in the ion-exclusion chromatography of carboxylic acids. I. Separation of benzenecarboxylic acids with tartaric acid as eluent and with UV-photometric detection.

The application of zirconium-modified silica gels (Zr-Silicas) as stationary phases for ion-exclusion chromatography with UV-photometric detection (IEC-PD) for mono-, di-, tri- and tetrabenzenecarboxylic acids (pyromellitic, trimellitic, hemimellitic, o-phthalic, salicylic and benzoic acids) and phenol was carried out using tartaric acid as the eluent. Zr-Silicas were prepared by the reaction of the silanol group on the surface of silica gel with zirconium tetrabutoxide [Zr(OCH2CH2CH2CH3)4] in ethanol solution. The effect of the amount of zirconium adsorbed on silica gel on chromatographic behavior of these benzenecarboxylic acids and phenol was investigated. As a result, Zr-Silica adsorbed on 20 mg zirconium g(-1) silica gel was the most suitable stationary phase in the IEC-PD for the simultaneous separation of these benzenecarboxylic acids and phenol. Excellent simultaneous separation and highly sensitive UV detection at 254 nm for these benzenecarboxylic acids and phenol were achieved in 20 min by the IEC-PD using the Zr-Silica column (250x4.6 mm I.D.) and a 10 mM tartaric acid at pH 2.5 as eluent.

Adsorption↗
PubMed2002

Monolithic silica columns with various skeleton sizes and through-pore sizes for capillary liquid chromatography.

Reduction of through-pore size and skeleton size of a monolithic silica column was attempted to provide high separation efficiency in a short time. Monolithic silica columns were prepared to have various sizes of skeletons (approximately 1-2 microm) and through-pores (approximately 2-8 microm) in a fused-silica capillary (50-200 microm I.D.). The columns were evaluated in HPLC after derivatization to C18 phase. It was possible to prepare monolithic silica structures in capillaries of up to 200 microm I.D. from a mixture of tetramethoxysilane and methyltrimethoxysilane. As expected, a monolithic silica column with smaller domain size showed higher column efficiency and higher pressure drop. High external porosity (> 80%) and large through-pores resulted in high permeability (K = 8 x 10(-14) -1.3 x 10(-12) m2) that was 2-30 times higher than that of a column packed with 5-mirom silica particles. The monolithic silica columns prepared in capillaries produced a plate height of about 8-12 microm with an 80% aqueous acetonitrile mobile phase at a linear velocity of 1 mm/s. Separation impedance, E, was found to be as low as 100 under optimum conditions, a value about an order of magnitude lower than reported for conventional columns packed with 5-microm particles. Although a column with smaller domain size generally resulted in higher separation impedance and the lower total performance, the monolithic silica columns showed performance beyond the limit of conventional particle-packed columns under pressure-driven conditions.

Chromatography, Liquid↗
PubMed2003

In flow activation of diol-silica with cyanogen bromide and triethylamine for preparing high-performance affinity chromatographic columns.

A new coupling strategy using pre-packed diol-silica supports to obtain affinity columns for high-performance affinity chromatography (HPAC) is described. These columns were prepared by "in flow" activation in which solutions containing anhydrous solutions of CNBr and triethylamine are separately pumped to a mixer and then onto a pre-packed diol-silica column. Recycling the amino ligand to be coupled several times over the activated silica diol columns results in ligand immobilization. DNA (the Op 1 lac operator), 6-aminohexyl-Cibacron and a peptide (melittin) were all successfully "in flow" coupled to freshly activated columns. Methods for CNBr activation of pre-packed diol-silica column were developed for one, two or three pump HPLC systems. The supports were successfully used for the HPAC purification of a Lac repressor-beta-galactosidase fusion protein, alcohol dehydrogenase, and calmodulin. Columns prepared by in flow activation/coupling procedures were shown to be stable for at least 14 months. Also, in flow activated silica columns could be stored in anhydrous acetone for at least 3 months prior to coupling. Our experiments with these affinity ligand columns (DNA-silica, aminohexyl-Cibacron F3GA-silica, and melittin-silica), suggests that this is a very successful coupling protocol for producing a variety of HPAC columns.

Chromatography, Affinity↗
PubMed2003

Synthesis and aqueous solution properties of polyelectrolyte-grafted silica particles prepared by surface-initiated atom transfer radical polymerization.

A range of polyelectrolyte-grafted silica particles have been prepared by grafting suitable initiators onto near-monodisperse, 304-nm-diameter silica particles using siloxane chemistry, followed by surface-initiated atom transfer radical polymerization (ATRP) of four ionic vinyl monomers, namely sodium 4-styrenesulfonate (SStNa), sodium 4-vinylbenzoate (NaVBA), 2-(dimethylamino)ethyl methacrylate (DAM), and 2-(diethylamino)ethyl methacrylate (DEA) in protic media. The resulting polyelectrolyte-grafted silica particles were characterized using dynamic light scattering (DLS), thermogravimetric analysis (TGA), X-ray photoelectron spectroscopy (XPS), scanning electron microscopy (SEM), helium pycnometry, and diffuse reflectance infrared Fourier transfer spectroscopy (DRIFTS). The TGA results indicated that the polyelectrolyte contents of the silica particles could be varied from 0.6% to 6.0% in weight. SEM studies revealed several surface morphologies for the grafted polyelectrolytes and XPS analysis of the particle surface also provided good evidence for surface grafting. Combined aqueous electrophoresis and DLS studies confirmed that these polyelectrolyte-grafted silica particles had pH-dependent colloid stabilities, as expected. Cationic polyelectrolyte-grafted silica particles were colloidally stable at low or neutral pH, but became aggregated at high pH. Conversely, anionic polyelectrolyte-coated silica particles became unstable at low pH. It was found that the rate of surface-initiated ATRP was substantially slower than the analogous solution polymerization. Finally, there was some evidence to suggest that, at least in some cases, a significant fraction of polymer chains became detached from the silica particles during polymerization.

Journal Article↗
PubMed2003

PAA/PEO comb polymer effects on rheological properties and inter-particle forces in aqueous silica suspensions.

The effects of a poly(acrylic acid) (PAA)-poly(ethylene) (PEO) comb polymer dispersant on the rheological properties and inter-particle forces in aqueous silica suspensions have been studied under varying pH conditions. The comb polymer was found to adsorb more strongly under acidic than basic conditions, indicating that the PAA backbone of the copolymer preferentially adsorbs onto silica surfaces with the PEO "teeth" extending out from the surface into the solution. In the presence of low concentrations of copolymer, the silica suspensions were stable due to electrostatic repulsions between the silica surfaces. At higher copolymer concentrations and under neutral and basic conditions, where the copolymer interacted only weakly with silica, the suspensions showed a transition from a dispersed to weakly flocculated state and attractive forces were measured between silica surfaces. Under acidic conditions, the silica dispersion also destabilized at intermediate copolymer adsorbed density and then was re-stabilized at higher adsorbed coverage. The silica suspensions were stable at high copolymer coverage due to steric repulsions between the particles. The destabilization at intermediate coverage is thought to be due to polymer bridging between particles or possibly depletion forces.

Journal Article↗
PubMed2003

An improved methodology for adsorption characterization of unmodified and modified silica gels.

An improvement in the adsorption characterization of the surface and structural properties of unmodified and modified mesoporous silica gels is presented. This improvement was achieved by selection of proper macroporous silica as the reference solid for adsorption characterization of porous silica gels. Experimental illustration is provided for unmodified and n-octyl-modified silica gels of different bonding density. The surface and structural properties of these silica gels were characterized by utilizing the standard adsorption data for both unmodified and octyl-modified LiChrospher Si-1000 macroporous silica gels. It was shown that the standard nitrogen adsorption data have an appreciable influence on the analysis of the pore size and surface properties of silica gels. This analysis can be improved by selecting the reference solid of the surface properties close to those of the silica gel studied.

Adsorption↗
PubMed2004

Three-body wear of dental resin composites reinforced with silica-fused whiskers.

OBJECTIVE: Recent studies used silica-fused whiskers to increase the strength and toughness of resin composites. This study investigated the three-body wear of whisker composites. It was hypothesized that the whisker composites would be more wear resistant than composites reinforced with fine glass particles, and the whisker-to-silica filler ratio would significantly affect wear. METHODS: Silica particles were mixed with silicon nitride whiskers at seven different whisker/(whisker + silica) mass fractions (%): 0, 16.7, 33.3, 50, 66.7, 83.3, and 100. Each mixture was heated at 800 degrees C to fuse the silica particles onto the whiskers. Each powder was then silanized and incorporated into a dental resin to make the wear specimens. A four-station wear machine was used with specimens immersed in a slurry containing polymethyl methacrylate beads, and a steel pin was loaded and rotated against the specimen at a maximum load of 76 N. RESULTS: Whisker-to-silica ratio had significant effects (one-way ANOVA; p < 0.001) on wear. After 4 x 10(5) wear cycles, the whisker composite at whisker/(whisker + silica) of 16.7% had a wear scar diameter (mean +/- sd; n = 6) of (643 +/- 39) microm and a wear depth of (82 +/- 19) microm, significantly less than a wear scar diameter of (1184 +/- 34) microm and a wear depth of (173 +/- 15) microm of a commercial prosthetic composite reinforced with fine glass particles (Tukey's multiple comparison). SEM examination revealed that, instead of whiskers protruding from the worn surface, the whiskers were worn with the composite surface, resulting in relatively smooth wear surfaces. SIGNIFICANCE: Silica-fused whisker reinforcement produced dental resin composites that exhibited high resistance to wear with smooth wear surfaces. These properties, together with the strength and fracture toughness being twice those of current glass particle-reinforced composites, may help extend the use of resin composite to large stress-bearing posterior restorations.

Analysis of Variance↗
PubMed2003

Reactive oxygen species (ROS) and reactive nitrogen species (RNS) generation by silica in inflammation and fibrosis.

Exposure to particulate silica (most crystalline polymorphs) causes a persistent inflammation sustained by the release of oxidants in the alveolar space. Reactive oxygen species (ROS), which include hydroxyl radical, superoxide anion, hydrogen peroxide, and singlet oxygen, are generated not only at the particle surface, but also by phagocytic cells attempting to digest the silica particle. Two distinct kinds of surface centers-silica-based surface radicals and poorly coordinated iron ions-generate O(2)(*)(-) and HO(*) in aqueous solution via different mechanisms. Crystalline silica is also a potent stimulant of the respiratory burst in phagocytic cells with increased oxygen consumption and production of O(*)(-), H(2)O(2), and NO leading to acute inflammation and HO(*) generation in the lung. Oxidative stress elicited by crystalline silica is also evidenced by increased expression of antioxidant enzymes such as manganese superoxide dismutase (Mn-SOD) and glutathione peroxidase, and the enzyme inducible nitric oxide synthase (iNOS). Generation of oxidants by crystalline silica particles and by silica-activated cells results in cell and lung injury, activation of cell signaling pathways to include MAPK/ERK kinase (MEK), and extracellular signal-regulated kinase (ERK) phosphorylation, increased expression of inflammatory cytokines (e.g., tumor necrosis factoralpha [TNFalpha], interleukin-1 [IL-1]), and activation of specific transcription factors (e.g., NFkappaB, AP-1). Silica can also initiate apoptosis in response to oxygen- and nitrogen-based free radicals, leading to mitochondrial dysfunction, increased gene expression of death receptors, and/or their ligands (TNFalpha, Fas ligand [FasL]).

Animals↗
PubMed2002

Diseases caused by silica: mechanisms of injury and disease development.

While silica particles are considered to be fibrogenic and carcinogenic agents, the mechanisms responsible are not well understood. This article summarizes literature on silica-induced accelerated silicosis, chronic silicosis, silico-tuberculosis, bronchogenic carcinoma, and immune-mediated diseases. This article also discusses the generation of reactive oxygen species (ROS) that occurs directly from the interaction of silica with aqueous medium and from silica-stimulated cells, the molecular mechanisms of silica-induced lung injuries with focus on silica-induced NF-kappaB activation, including its mechanisms, possible attenuation and relationship to silica-induced generation of cyclooxygenase II and TNF-alpha. Silica-induced AP-1 activation, protooncogene expression, and the role of ROS in these processes are also briefly discussed.

Acute Disease↗
PubMed2000

Performance of a monolithic silica column in a capillary under pressure-driven and electrodriven conditions

A continuous macroporous silica gel network was prepared in a fused-silica capillary and evaluated in reversed-phase liquid chromatography. Under pressure-driven conditions, the monolithic silica column derivatized to C18 phase (100 microns in diameter, 25 cm in length, silica skeleton size of approximately 2.2 microns) produced plate heights of about 23 and 81 microns at 0.5 mm/s with a pressure drop of 0.4 kg/cm2, and at 4.0 mm/s with 3.6 kg/cm2, respectively, in 90% acetonitrile for hexylbenzene with a k value of 0.7. The separation impedance, E, calculated for the present monolithic silica column was much smaller at a low flow rate than those for particle-packed columns, although higher E values were obtained at a higher flow rate. Considerable dependence of column efficiency on the linear velocity of the mobile phase was observed despite the small size of the silica skeletons. A major source of band broadening in the HPLC mode was found in the A term of the van Deemter equation. The performance of the continuous silica capillary column in the electrodriven mode was much better than that in the pressure-driven mode. Plate heights of 7-8 microns were obtained for alkylbenzenes at 0.7-1.3 mm/s, although the electroosmotic flow was slow. In HPLC and CEC mode, the dependency of plate height on k values of the solutes was observed as seen in open tube chromatography presumably due to the contribution of the large through-pores. Since monolithic silica capillary columns can provide high permeability, the pressure-driven operation at a very low pressure can afford a separation speed similar to CEC at a high electric field.

Journal Article↗
PubMed2003

Novel routes to Cu(salicylaldimine) covalently bound to silica: combined pulse EPR and in situ attenuated total reflection-IR studies of the immobilization.

Several novel routes for the immobilization of modified Cu(salicylaldimine) complexes on commercially available silica are described. New pulse electron paramagnetic resonance (EPR) and electron-nuclear double resonance sequences, which provide more detailed information than that available previously, in combination with continuous wave EPR, allow a definitive assignment of the geometry at the copper center in the immobilized Cu(salicylaldimine). Immobilization of the modified Cu(salicylaldimine) on silica was followed in situ by monitoring the intensity of the characteristic free- and metal-coordinated imine bands as a function of time using attenuated total reflectance IR spectroscopy. On the basis of these studies, the outcome of the Schiff base condensation of Cu-bis(salicylaldehyde) with gamma-aminopropyl-modified silica gel is shown to provide immobilized trans-O(2)N(2)- and O(3)N-coordinated immobilized Cu(salicylaldimine)-type compounds. In addition, trans-O(2)N(2)- or O(3)N-coordinated copper centers are selectively prepared on silica by controlling the aminopropyl modifier loading, thus opening a route to compounds not available by conventional synthesis. The O(3)N-coordinated Cu(salicylaldimine)-type compound on silica was investigated as a precursor for the synthesis of a tethered chiral Cu(salicylaldimine) via reaction of the coordinated carbonyl group with (R)-(+)-alpha-methylbenzylamine. Supported Cu(salicylaldimine) was also prepared via the immobilization of the appropriate silylethoxy-modified homogeneous precursor on silica gel. Precursors and silica-supported Cu(salicylaldimine) materials have been fully characterized. Comparisons are drawn with related Cu(salicylaldimine) immobilized in silica aerogels.

Journal Article↗