Search PubMed⌕ Search

SEARCH · Search PubMed

Results for “Powder Diffraction”

Search indexed PubMed citations on genomics, clinical trials, systematic reviews and public health. Explore titles, authors and supplied subject terms, then open the PubMed record.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 289 records · Page 16Linked to original sources

Reversible guest exchange and ferrimagnetism (T(C) = 60.5 K) in a porous cobalt(II)-hydroxide layer structure pillared with trans-1,4-cyclohexanedicarboxylate.

The synthesis, characterization, and reversible guest-exchange chemistry of a new porous magnetic material that orders ferrimagnetically at 60.5 K are described. The material, Co(5)(OH)(8)(chdc).4H(2)O (chdc = trans-1,4-cyclohexanedicarboxylate), contains tetrahedral-octahedral-tetrahedral Co(II)-hydroxide layers of composition Co((oct))(3)Co((tet))(2)(OH)(8) that are linked together by bis(unidentate) chdc pillars. Noncoordinated water molecules occupy 1-D channels situated between the chdc pillars. The material remains monocrystalline during dehydration from Co(5)(OH)(8)(chdc).4H(2)O (CDCC.4H(2)O) to Co(5)(OH)(8)(chdc) (CDCC) via an intermediate Co(5)(OH)(8)(chdc).2H(2)O (CDCC.2H(2)O) upon heating or evacuation. In-situ single crystal and powder X-ray diffraction analyses indicate that the interlayer spacing decreases in two steps, each corresponding to the loss of two water molecules per formula unit as determined by thermogravimetry. The single crystal structure of the fully dehydrated material, CDCC, has no void volume due to a tilting of the pillars and 9% decrease of the interlayer spacing with water removal. Exposure of CDCC to air causes rapid rehydration of this material to CDCC.4H(2)O, as determined by single crystal X-ray diffraction, powder X-ray diffraction, thermogravimetry, and vibrational spectroscopy. Both the hydrated and dehydrated forms order magnetically below 60.5 K. The susceptibility data are consistent with ferrimagnetic behavior, and the value of the saturation magnetization at 2 K (ca. 2 micro(B)) is explained by a model of two sublattices, one comprising three octahedral cobalt atoms and another comprising two tetrahedral cobalt atoms. There is an enhanced 2-D correlation within the layer at temperatures just above the Curie temperature, as seen by nonlinearity in the ac susceptibility data and remanence in the isothermal magnetization. The crossover from 2-D to 3-D ordering occurs at T(C). The large anisotropy in the magnetization data on a single crystal suggests either a 2-D Ising or an XY magnet while the critical exponent of 0.25 is in favor of the latter. Both magnetization data in a small field in the ac and dc mode and isothermal magnetization data provide evidence of a further change in behavior at 23 K, which may originate from a reorientation of the moments within the layer. Variation of the pillar and of the guest-exchange chemistry, including the exchange of magnetic guests such as O(2), offers the possibility of tailoring the magnetic properties of this material.

Journal Article↗

Improvement of dissolution and oral absorption of ER-34122, a poorly water-soluble dual 5-lipoxygenase/cyclooxygenase inhibitor with anti-inflammatory activity by preparing solid dispersion.

Several formulation approaches were attempted to improve the dissolution and the oral absorption of ER-34122, which is a novel dual 5-lipoxygenase/cyclooxygenase inhibitor with potent anti-inflammatory activity. The solid dispersion of ER-34122 with hydroxypropylmethylcellulose (TC-5RW), which is an inert solid carrier, resulted in a significant improvement in the dissolution rate of ER-34122. The solid dispersion was prepared by a solvent evaporation method using ethanol and water. The solid-state characteristics of the solid dispersion, the corresponding physical mixture, and ER-34122 alone were investigated by X-ray powder diffraction, Fourier transform infrared spectroscopy (FTIR), and an automated controlled-atmosphere microbalance. The X-ray powder diffraction patterns suggest that the solid dispersion exists in a totally amorphous state and the others exist in a crystalline state. The FTIR spectra results suggest that ER-34122 can interact with TC-5RW through intermolecular hydrogen bonding in the solid dispersion. This interaction may cause a stabilization of ER-34122 in the higher-energy, faster-dissolving amorphous state. The dissolution rate of ER-34122 from the solid dispersion was significantly greater than that from the physical mixture or the pure drug. Furthermore, when orally administrated to beagle dogs, ER-34122 showed about a 100-fold increase in both maximum concentration (C(max)) and area under the curve of concentration versus time (AUC) compared with the pure drug. Consequently, it was determined that the solid dispersion technique with TC-5RW provides a promising way to increase the dissolution rate and the oral absorption of poorly water-soluble drugs such as ER-34122.

Absorption↗

Supramol--a program for structure analysis of intercalates using molecular simulations: the structure of VOPO4*C6H4O2.

A method of structure analysis of intercalates has been developed that uses a combination of molecular simulations with powder diffraction. The program Supramol for the determination of intercalated structures uses crystal energy minimization in conjunction with powder diffraction data. The program solves the multiple minima problem in molecular mechanics, generating initial models systematically and searching for the global energy minimum by comparing the experimental and calculated diffraction patterns. The program is compatible with the Cerius2 modeling environment. Two intercalated crystal structures solved by Supramol are presented in the present paper: vanadyl phosphate intercalated with p-benzoquinone and the high temperature phase of vanadyl phosphate intercalated with dioxane. The structure of vanadyl phosphate intercalated with p-benzochinone is tetragonal, space group I4/ m, the unit cell parameters a=6.21 A, b=6.21 A, c=20.18 A and the density is rho=2.30 g x cm(-3), Z=4. The crystal structure of vanadyl phosphate intercalated with dioxane (high temperature phase) is monoclinic, space group C2/ m, unit cell parameters are: a= b=8.94 A, c=8.22 A, alpha=gamma=90 degrees, beta=106.30 degrees, Z=4, density 2.248 g x cm(-3).

Computer Simulation↗

Physical characterization of erythromycin: anhydrate, monohydrate, and dihydrate crystalline solids.

Hot-stage microscopy, thermoanalytical methods, and X-ray powder diffraction were used to demonstrate that crystalline erythromycin dihydrate converts to the crystalline anhydrate via a noncrystalline intermediate. X-ray powder diffraction, IR spectral, thermogravimetric, and differential thermal analyses were used to characterize the monohydrate material. The flow interrupt technique, a procedure recently developed to deal with low surface area samples, was employed successfully in obtaining isotherms and specific surface areas for the monohydrate and anhydrate. The relative dissolution rates of the various hydrates were determined in an aqueous solution (0.01 M phosphate buffer, pH 7.5) at 37 degrees. The results showed a significant difference in the dissolution rate of the dihydrate compared to the monohydrate and anhydrate.

Chemical Phenomena↗

In situ analysis of mineral content and crystallinity in bone using infrared micro-spectroscopy of the nu(4) PO(4)(3-) vibration.

Measurements of bone mineral content and composition in situ provide insight into the chemistry of bone mineral deposition. Infrared (IR) micro-spectroscopy is well suited for this purpose. To date, IR microscopic (including imaging) analyses of bone apatite have centered on the nu(1),nu(3) PO(4)(3-) contour. The nu(4) PO(4)(3-) contour (500-650 cm(-1)), which has been extensively used to monitor the crystallinity of hydroxyapatite in homogenized bone samples, falls in a frequency region below the cutoff of the mercury-cadmium-telluride detectors used in commercial IR microscopes, thereby rendering this vibration inaccessible for imaging studies. The current study reports the first IR micro-spectroscopy spectra of human iliac crest cross sections in the nu(4) PO(4)(3-) spectral regions, obtained with a synchrotron radiation source and a Cu-doped Ge detector coupled to an IR microscope. The acid phosphate (HPO(4)(2-)) content and mineral crystallite perfection (crystallinity) of a human osteon were mapped. To develop spectra-structure correlations, a combination of X-ray powder diffraction data and conventional Fourier transform IR spectra have been obtained from a series of synthetic hydroxyapatite crystals and natural bone powders of various species and ages. X-ray powder diffraction data demonstrate that there is an increase in average crystal size as bone matures, which correlates with an increase in the nu(4) PO(4)(3-) FTIR absorption peak ratio of two peaks (603/563 cm(-1)) within the nu(4) PO(4)(3-) contour. Additionally, the IR results reveal that a band near 540 cm(-1) may be assigned to acid phosphate. This band is present at high concentrations in new bone, and decreases as bone matures. Correlation of the nu(4) PO(4)(3-) contour with the nu(2) CO (3)(2-) contour also reveals that when acid phosphate content is high, type A carbonate content (i.e., carbonate occupying OH(-) sites in the hydroxyapatite lattice) is high. As crystallinity increases and acid phosphate content decreases, carbonate substitution shifts toward occupation of PO(4)(3-) sites in the hydroxyapatite lattice. Thus, IR microscopic analysis of the nu(4) PO(4)(3-) contour provides a straightforward index of both relative mineral crystallinity and acid phosphate concentration that can be applied to in situ IR micro-spectroscopic analysis of bone samples, which are of interest for understanding the chemical mechanisms of bone deposition in normal and pathological states.

Adult↗

Long-range magnetic order in Mn[N(CN)2]2(pyz) (pyz = pyrazine). Susceptibility, magnetization, specific heat, and neutron diffraction measurements and electronic structure calculations.

Using dc magnetization, ac susceptibility, specific heat, and neutron diffraction, we have studied the magnetic properties of Mn[N(CN)2]2(pyz) (pyz = pyrazine) in detail. The material crystallizes in the monoclinic space group P2(1)/n with a = 7.3248(2), b = 16.7369(4), and c = 8.7905 (2) A, beta = 89.596 (2) degrees, V = 1077.65(7) A(3), and Z = 4, as determined by Rietveld refinement of neutron powder diffraction data at 1.35 K. The 5 K neutron powder diffraction data reflect very little variation in the crystal structure. Interpenetrating ReO3-like networks are formed from axially elongated Mn(2+) octahedra and edges made up of mu-bonded [N(CN)2](-) anions and neutral pyz ligands. A three-dimensional antiferromagnetic ordering occurs below T(N) = 2.53(2) K. The magnetic unit cell is double the nuclear one along the a- and c-axes, giving the (1/2, 0, 1/2) superstructure. The crystallographic and antiferromagnetic structures are commensurate and consist of collinear Mn(2+) moments, each with a magnitude of 4.15(6) mu(B) aligned parallel to the a-direction (Mn-pyz-Mn chains). Electronic structure calculations indicate that the exchange interaction is much stronger along the Mn-pyz-Mn chain axis than along the Mn-NCNCN-Mn axes by a factor of approximately 40, giving rise to a predominantly one-dimensional magnetic system. Thus, the variable-temperature magnetic susceptibility data are well described by a Heisenberg antiferromagnetic chain model, giving g = 2.01(1) and J/k(B) = -0.27(1) K. Owing to single-ion anisotropy of the Mn(2+) ion, field-induced phenomena ascribed to spin-flop and paramagnetic transitions are observed at 0.43 and 2.83 T, respectively.

Journal Article↗

The thermal transitions and structural properties of 5alpha-cholestan-3beta-ol esters of aliphatic acids.

5 alpha-Cholestan-3 beta-ol esters of aliphatic acids undergo both enantiotropic and monotropic changes of state. Ten saturated and three unsaturated esters have been examined by differential scanning calorimetry and polarizing microscopy to determine transition temperatures, enthalpies, and entropies. The results are compared with an analogous series of cholesterol esters. All esters of even-numbered n-alkanoic acids from C2 to C20 melt from a crystalline state to an isotropic liquid. The crystalline state has been studied by X-ray powder diffraction. The C8 to C20 esters have progressively increasing crystalline melting transition temperatures from 76 to 99 degrees C and possess similar X-ray powder diffraction patterns, suggesting that these compounds form an isostructural series. Esters of C2, C4, and C6 acids exhibit polymorphism. Crystalline cholestanol oleate melts to an isotropic liquid, whereas cholestanol linoleate and linolenate fail to crystallize, even after several months at -20 degrees C. Esters of the even-numbered saturated acids from C4 to C14 form monotropic cholesteric liquid crystalline phases. Esters C10, C12, and C14 form smectic liquid crystalline phases. Cholestanol oleate, linoleate, and linolenate form both cholesteric and smectic mesophases. The lower smectic to cholesteric and cholesteric to isotropic transition temperatures of the cholestanol esters compared to the corresponding transition temperatures of the analogous cholesterol esters suggest that the delta 5 double bond in cholesterol increases the thermal stability of the mesophases of cholesterol esters.

Binding Sites↗

Impact of freezing procedure and annealing on the physico-chemical properties and the formation of mannitol hydrate in mannitol-sucrose-NaCl formulations.

The goal was to investigate the impact of NaCl on the physico-chemical properties of mannitol-sucrose formulations during freezing and drying, with special focus on mannitol hydrate formation. Differential scanning calorimetry (DSC) and low-temperature X-ray powder diffraction (LTXRD) were used to study the frozen solutions. After lyophilization the products were analyzed with DSC, temperature-modulated DSC (TMDSC), X-ray powder diffraction (XRD) and Karl-Fischer titration. DSC showed an inhibition of mannitol crystallization by sucrose and NaCl during freezing. The glass transitions of the maximally freeze-concentrated solutions (Tg') were lowered by both mannitol and NaCl. By the application of an annealing step during lyophilization mannitol crystallinity could be increased. However, lyophilization with an annealing step promoted the formation of mannitol hydrate, which is known to undergo conversion into the anhydrous polymorphs of mannitol upon storage. LTXRD revealed that mannitol hydrate was formed at temperatures below -30 degrees C, but not at -27 degrees C. The tendency that mannitol hydrate is predominantly formed at lower temperature was confirmed by XRD of lyophilized products, produced at different annealing temperatures. For the development of lyophilization cycles the lowered Tg', as well as the tendency to mannitol hydrate formation predominantly at lower temperature needs to be considered.

Calorimetry, Differential Scanning↗

Physicochemical characterization of casein phosphopeptide-amorphous calcium phosphate nanocomplexes.

Milk caseins stabilize calcium and phosphate ions and make them available to the neonate. Tryptic digestion of the caseins yields phosphopeptides from their polar N-terminal regions that contain clusters of phosphorylated seryl residues. These phosphoseryl clusters have been hypothesized to be responsible for the interaction between the caseins and calcium phosphate that lead to the formation of casein micelles. The casein phosphopeptides stabilize calcium and phosphate ions through the formation of complexes. The calcium phosphate in these complexes is biologically available for intestinal absorption and remineralization of subsurface lesions in tooth enamel. We have studied the structure of the complexes formed by the casein phosphopeptides with calcium phosphate using a range of physicochemical techniques including x-ray powder diffraction, scanning electron microscopy, transmission electron microscopy, and equilibrium binding analyses. The amorphous nature of the calcium phosphate phase was confirmed by two independent methods: x-ray powder diffraction and selected area diffraction. In solution, the ion activity product of a basic amorphous calcium phosphate phase was the only ion product that was a function of bound phosphate independent of pH, consistent with basic amorphous calcium phosphate being the phase stabilized by the casein phosphopeptides. Detailed investigations of calcium and calcium phosphate binding using a library of synthetic homologues and analogues of the casein phosphopeptides have revealed that although the fully phosphorylated seryl-cluster motif is pivotal for the interaction with calcium and phosphate, other factors are also important. In particular, calcium binding and calcium phosphate stabilization by the peptides was influenced by peptide net charge, length, and sequence.

Animals↗

Transformation of lactulose trihydrate into anhydrous lactulose by fluidized bed drying and its characterization.

Stable anhydrous lactulose was produced from lactulose trihydrate by stepwise heating on a fluidized bed. The processes were performed on stable powder forms. The anhydrous lactulose was characterized by an opaque white appearance, a coarse surface structure with random cracks and indentations, a high degree of crystallization, stability under humid conditions, and by X-ray powder diffraction, differential thermal analysis, and differential thermogravimetry. Those characteristics were different from those of the original trihydrate, which was transparent, had a smooth surface and a higher degree of crystallization, was stable under humid conditions and had different X-ray powder diffraction, differential thermal analysis, and thermogravimetric characteristics. The transformation was enhanced when the inlet temperature was 45-55 degrees C or when the temperature of the fluidized bed was over 40 degrees C. At these cutoff temperatures, both crystalline forms were observed.

Crystallization↗

Crystallisation of alpha-crustacyanin, the lobster carapace astaxanthin-protein: results from EURECA.

Crystallisation of alpha-crustacyanin, the lobster carapace astaxanthin-protein was attempted under microgravity conditions in EURECA satellite using liquid-liquid diffusion with polyethyleneglycol (PEG) as precipitant; in a second reaction chamber phenol and dioxan were used as additives to prevent composite crystal growth. Crystals of alpha-crustacyanin grown under microgravity from PEG were larger than those grown terrestrially in the same apparatus under otherwise identical conditions. On retrieval, the crystals from PEG were shown to be composite and gave a powder diffraction pattern. The second reaction chamber showed leakage on retrieval and had also been subjected to rapid temperature variation during flight. Crystal fragments were nevertheless recovered but showed a powder diffraction pattern. It is concluded, certainly for liquid-liquid diffusion using PEG alone, that, for crustacyanin, although microgravity conditions resulted in an increase in dimensions of crystals, a measurable improvement in molecular ordering was not achieved.

Animals↗

Rapid methods for the calibration of solid-state detectors.

A complementary pair of rapid methods for the energy calibration of solid-state detectors have been developed. Each method requires only a single measurement from either (i) a glass sample containing elements chosen to produce fluorescence lines over a suitable energy range when exposed to a polychromatic beam of X-rays, or (ii) a powder diffraction standard in the presence of diffraction slits. The fluorescent glass method has the advantage of allowing simultaneous energy calibration of a number of detectors without requiring diffraction slits. There is the potential for the glass material to be incorporated into virtually any sample holder to allow a continuous in situ calibration. Complementary observations of a powder diffraction standard allow simultaneous calibration of diffraction 2theta and monitoring of the detector for drift.

Journal Article↗

Polymorphism of heptalithium nitridovanadate(V) Li7[VN4].

The system Li-V-N was studied by means of X-ray and neutron powder diffraction, thermal and chemical analyses, and XAS spectroscopy at the vanadium K-edge. Three polymorphs of Li(7)[VN(4)] have been established from X-ray and neutron powder diffraction (gamma-Li(7)[VN(4)], space group Pfourmacr;3n, No. 218, a = 960.90(4) pm, V = 887.23(6) x 10(6) pm(3), Z = 8; beta-Li(7)[VN(4)], space group Pathremacr;, No. 205, a = 959.48(3) pm, V = 883.31(5) x 10(6) pm(3), Z = 8; alpha-Li(7)[VN(4)], P4(2)/nmc, No. 137, a = 675.90(2) pm, c = 488.34(2) pm, V = 223.09(1) x 10(6) pm(3), Z = 2). Crystallographic and phase relations are discussed. All three modifications are diamagnetic, indicating vanadium in the oxidation state +5. The V-K XAS spectra support the oxidation state assignment, the non-centrosymmetric coordination (tetrahedral), and the nearly identical second coordination sphere of vanadium, made up from Li in all three phases. The 3d-related features of the spectra display strongly localized properties. The phase transitions appear to be reconstructive; no direct group-subgroup symmetry relations of the crystal structures exist. The formation of solid solutions between Li(2)O and beta-Li(7)[VN(4)] with the general formula Li(1.75)((V(0.25(1)(-)(x))Li(0.25)(x))(N(1)(-)(x)O(x)())) with 0 <or= x <or= 1 leads to increasing substitution of V by Li. At the approximate composition with x = 0.125 the Li-V-disorder seems to be complete: X-ray diffraction lines give rise to only one-half of the original unit cell dimensions, a' = 476.47(3) pm approximately (1/2)a(beta-Li(7)[VN(4)]).

Journal Article↗

Structural, Magnetic, and Ion-Exchange Properties of RbMnHP(3)O(10).

The crystal structure, magnetic properties, and ion-exchange behavior of RbMnHP(3)O(10) have been determined. The crystal structure (a = 12.1866(3) Å, b = 8.3586(2) Å, c = 9.0763(3) Å, beta = 109.067(1) degrees, space group C2/c), determined from X-ray powder diffraction, is of NH(4)FeHP(3)O(10) type, consisting of hydrogen triphosphate anions linking Jahn-Teller distorted Mn(III)O(6) octahedra around Rb(+) cations. Magnetic susceptibility measurements and low-temperature neutron powder diffraction show that RbMnHP(3)O(10) behaves as a Curie-Weiss paramagnet at high temperatures and orders antiferromagnetically below a Néel temperature of 10 K. The magnetic structure is commensurate with the nuclear cell, and the collinear antiferromagnetic structure has magnetic symmetry group P(C)()2/c' with spins of 3.82(6) &mgr;(B) lying in the ac plane. Exchange of H(+) for Li(+) has not proved possible without a breakdown of the RbMnHP(3)O(10) framework due to strong symmetric hydrogen bonding between triphosphate anions.

Journal Article↗

Structure analysis of montmorillonite intercalated with rhodamine B: modeling and experiment.

The intercalation process and the structure of montmorillonite intercalated with [rhodamine B]+ cations have been investigated using molecular modeling (molecular mechanics and molecular dynamics simulations), X-ray powder diffraction and IR spectroscopy. The structure of the intercalate depends strongly on the concentration of rhodamine B in the intercalation solution. The presence of two phases in the intercalated structure was revealed by modeling and X-ray powder diffraction: (i) phase with basal spacing 18 A and with bilayer arrangement of guests and (ii) phase with average basal spacing 23 A and with monolayer arrangement of guests. In both phases the monomeric and dimeric arrangement can coexist in the interlayer space. Three types of dimers in the interlayer structure have been found by modeling: (i) H-dimer (head-to-head arrangement) present in the 18 A phase, (ii) sandwich type of the head-to-tail arrangement (present in the 23 A phase) and (iii) J-dimer (head-to-tail arrangement) present in the 23 A phase. Figure Montmorillonite intercalated with rhodamine B cations. On the left: phase 18 A, bilayer dimeric arrangement of guests (H-dimers). On the right: phase 23 A, monolayer arrangement of guests prepared using intercalation solution with a low concentration of rhodamine B

Bentonite↗

Characterization of hemoglobin immobilized on gamma-zirconium phosphate.

The fact that different gamma-zirconium phosphate (gamma-ZrP) preintercalation method induced varied degree and type of conformational change of the adsorption protein was confirmed by characterization techniques including circular dichroism (CD), fourier transform infrared spectroscopy (FTIR) and X-ray powder diffraction (XRD) analysis. The results indicated that the association of hemoglobin with gamma-ZrP preintercalated using butylamine was correlated with conformational change in the secondary structure of the protein. gamma-ZrP which was preintercalated with tetra (n-butylammonium) hydroxide caused the conformational change of Hemoglobin in both the secondary structure and the tertiary structure. X-ray powder diffraction analysis was used to analyze the crystalline structure of the nanocomposites prepared by relamination. The adsorption isotherms of Hemoglobin on different matrices were set up and fitted with Langmuir and Freundlich equations.

Absorption↗

A new type of constraint in the maximum-entropy method using ambiguous phase information from anomalous-scattering powder data.

Anomalous scattering of X-rays at a synchrotron source can be used for the ab initio structure determination of unknown crystal structures using only powder diffraction data. For noncentrosymmetric crystals, the phases of structure factors can only be determined with a remaining ambiguity, when one chemical element is used as resonant scatterer. A corresponding additional constraint function has been built into an enhanced version of the program MEED, so that now all types of information gained from an anomalous-scattering powder diffraction experiment can be used in a maximum-entropy calculation of the electron-density distribution: phased reflections, unphased reflections, intensities of groups of overlapping reflections, and now also reflections with a remaining ambiguity in the phase. This is important for practical use, since a lot of information is already lost in the powder diagram compared with single-crystal datasets and it is essential to use all remaining information. The new constraint is demonstrated with the structure of Cu(5)Zn(8).

Journal Article↗

Influence of solvents on the variety of crystalline forms of erythromycin.

The influence of the organic solvents widely used in the pharmaceutical industry (acetone, methylethylketone, ethanol, and isopropanol) both in the presence and in the absence of water on the crystallization behavior of erythromycin (Em), a clinically relevant antibiotic of the macrolide group, was investigated. It was observed that despite a high preference for water as a guest molecule, Em rather easily forms solvates with the organic solvents studied. Consequently, 4 distinct solvates of Em have been isolated by recrystallization: acetonate, methylethylketonate, ethanolate, and isopropanolate. It was established that in a pure organic solvent, or 1:9 or 1:1 water-organic solvent mixtures, the corresponding solvate is always crystallized. However, the recrystallization of erythromycin from 2:1 water-organic solvent (excluding methylethylketone) mixture results in the formation of a crystal hydrate form. X-ray powder diffraction revealed the isostructurality of the solvates with acetone and methylethylketone. Thermogravimetric analysis showed that the loss of volatiles by all of the solvated crystals is nonstoichiometric. The desolvation behavior of the solvates with the organic solvents studied by means of variable-temperature x-ray powder diffraction indicates that in contrast to erythromycin dihydrate, they belong to a different class of solvates--those that produce an amorphous material upon desolvation.

Anti-Bacterial Agents↗