Search PubMed⌕ Search

SEARCH · Search PubMed

Results for “Na2SO4”

Search indexed PubMed citations on genomics, clinical trials, systematic reviews and public health. Explore titles, authors and supplied subject terms, then open the PubMed record.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 289 records · Page 16Linked to original sources
PubMed1995

Analytical treatment of the variable-angle sample spinning nuclear magnetic resonance spectra in the presence of the second-order quadrupole interaction. Determination of the quadrupole parameters and the chemical shift tensor.

The analytical expressions for the transition probability of the central transition of the variable-angle sample spinning nuclear magnetic resonance (VAS NMR) spectrum for non-integral spins in the presence of second-order quadrupole interactions are derived on the basis of the stationary perturbation theory. The modulating parameters of the VAS NMR spectrum due to the time-dependent part of the quadrupole energy are found to be different (asymmetry parameter eta > 0.1) from those obtained from the average Hamiltonian theory. Using the conditions for saddle points and local maxima, it has been observed that there is a range of values for sample spinning angle beta around 32, 44 and 72 degrees to obtain the single peak; the range width can indicate the value of eta. Analytical expressions for the single-peak positions corresponding to beta around 32, 44 and 72 degrees are derived in terms of quadrupole parameters and chemical shift tensor. Further, we have described an analytical method to find the principal values of the chemical shift tensor in addition to the quadrupole parameters, using VAS NMR. As an illustration, the quadrupole parameters are computed for Na2MoO4 and Na2SO4 and compared with the values available in the literature (computed from wide-line NMR and magic-angle sample spinning (MAS) NMR data using the position of peaks and shoulders). For Na2MoO4 the principal values of the chemical shift tensor are found to be +17.5, -12 and -6.5 ppm. The present method is accurate and easy to apply as it involves only the positions of peaks and not of shoulders.(ABSTRACT TRUNCATED AT 250 WORDS)

Magnetic Resonance Spectroscopy↗
PubMed2004

Transport of ions across peritoneal membrane.

The electrical conductance of ions across the peritoneal membrane of young buffalo (approximately 18-24 months old) has been recorded. Aqueous solutions of NaF, NaNO3, NaCl, Na2SO4, KF, KNO3, KCl, K2SO4, MgCl2, CaCl2, CrCl3, MnCl2, FeCl3, CoCl2, and CuCl2 were used. The conductance values have been found to increase with increase in concentration as well as with temperature (15 to 35 degrees C) in these cases. The slope of plots of specific conductance, kappa, versus concentration exhibits a decrease in its values at relatively higher concentrations compared to those in extremely dilute solutions. Also, such slopes keep on increasing with increase in temperature. In addition, the conductance also attains a maximum limiting value at higher concentrations in the said cases. This may be attributed to a progressive accumulation of ionic species within the membrane. The kappa values of electrolytes follow the sequence for the anions: SO4(2-)>Cl->NO3->F- while that for the cations: K+>Na+>Ca2+>Mn2+>Co2+>Cu2+>Mg2+>Cr3+>Fe3+. In addition, the diffusion of ions depends upon the charge on the membrane and its porosity. The membrane porosity in relation to the size of the hydrated species diffusing through the membrane appears to determine the above sequence. As the diffusional paths in the membrane become more difficult in aqueous solutions, the mobility of large hydrated ions gets impeded by the membrane framework and the interaction with the fixed charge groups on the membrane matrix. Consequently, the membrane pores reduce the conductance of small ions, which are much hydrated. An increase in conductance with increase in temperature may be due to the state of hydration, which implies that the energy of activation for the ionic transport across the membrane follows the sequence of crystallographic radii of ions accordingly. The Eyring's equation, kappa=(RT/Nh)exp[-DeltaH*/RT]exp[DeltaS*/R], has been found suitable for explaining the temperature dependence of conductance in the said cases. This is apparent from the linear plots of log[kappaNh/RT] versus 1/T. The results indicate that the permeation of ions through the membrane giving negative values of DeltaS* suggest that there may be formation of either covalent linkage between the penetrating ions and the membrane material or else the permeation may not be the rate-determining step. On the one hand, a high DeltaS* value associated with the high value of energy of activation, Ea, for diffusion may suggest the existence of either a large zone of activation or loosening of more chain segments of the membrane. On the other hand, low value of DeltaS* implies that converse is true in such cases, i.e., either a small zone of activation or no loosening of the membrane structure upon permeation.

Animals↗
PubMed2004

Detection and characterization of an acid-induced folding intermediate of endostatin.

Endostatin, an important angiogenesis inhibitor, is very acid resistant. We are particularly interested in knowing that whether or not endostatin can form a folding intermediate during acid titration. 1H-NMR, CD spectrum, and ANS binding assay show that endostatin at pH 2.0 contains little tertiary structure, but retains substantial secondary structure with strong ANS binding, and Na2SO4 or TFE is found to strongly stabilize endostatin at pH 2.0. All these observations are consistent with the formation of a folding intermediate at pH 2.0. Kinetics studies show that sulfate anions significantly slow down the process for endostatin to reach its equilibrium state at pH 2.0. A regular increase in the amount of alpha-helix content of the intermediate of endostatin at pH 2.0 is found when the concentration of TFE is increased in the range of 0-40%, suggesting that endostatin has an intrinsic alpha-helical propensity.

Endostatins↗
PubMed2004

Development of a solid-phase extraction method for the determination of polychlorinated biphenyls in water.

Polychlorinated biphenyls (PCBs) in water were extracted with a rebuilt extraction unit using 47 mm C18 solid-phase extraction (SPE) disks. Three types of disks (SPEC, ENVI and Empore) were investigated for the extraction of seven PCBs from 11 reagent water spiked at two concentration levels (20 and 1000 ng/l). The Empore disks produced the best analyte recoveries (91-107% with R.S.D. of 1-8%) at the low concentration level and displayed no leaking tendency. Empore disks were therefore considered superior to ENVI and SPEC disks for the conditions outlined in this work. The obtained extracts were dried and purified in an additional clean-up step using custom-made columns containing Florisil and Na2SO4. For water containing large amounts of organic matter, a pre-filtration was included. Final analysis was carried out on a dual-column GC-electron-capture detection system with on-column injection. The optimised extraction method, including clean-up, was less time-consuming and used less hazardous organic solvents than conventional liquid-liquid extraction (LLE) methods. Recoveries were 92-102% with R.S.D. of 3-8%.

Chromatography, Gas↗
PubMed2004

Effect of the ionic strength of salts on retention and overloading behavior of ionizable compounds in reversed-phase liquid chromatography II. Symmetry-C18.

In a companion paper, we describe the influence of the concentration and the nature of salts dissolved in the mobile phase (methanol:water, 40:60, v/v) on the adsorption behavior of propranolol (R'-NH2+ -R, Cl-) on XTerra-C18. The same experiments were repeated on a Symmetry-C18 column to compare the adsorption mechanisms of this ionic compound on these two very different RPLC systems. Frontal analysis (FA) measurements were first carried out to determine the best isotherm model accounting for the adsorption behavior of propranolol hydrochloride on Symmetry with a mobile phase without salt (and only 25% methanol to compensate for the low retention in the absence of salt). The adsorption data were best modeled by the bi-Moreau model. Large concentration band profiles of propranolol were recorded with mobile phases having increasing KCl concentrations (0, 0.002, 0.005, 0.01, 0.05, 0.1 and 0.2 M) and the best values of the isotherm coefficients were determined by the inverse method (IM) of chromatography. The general effect of a dissociated salt in the mobile phase was the same as the one observed earlier with XTerra-C18. Increasing the salt concentration increases the two saturation capacities of the adsorbent and the adsorption constant on the low-energy sites. The adsorption constant on the high-energy sites decreases and the adsorbate-adsorbate interactions tend to vanish with increasing salt concentration of the mobile phase. The saturation capacities decrease with increasing radius of the monovalent cation (Na+, K+, Cs+, etc.). Using sulfate as a bivalent anion (Na2SO4) affects markedly the adsorption equilibrium: the saturation capacities are drastically reduced, the high-energy sites nearly disappear while the adsorption constant and the adsorbate-adsorbate interactions on the low-energy sites increase strongly. The complexity of the thermodynamics in solution might explain the different influences of these salts on the adsorption behavior.

Adsorption↗
PubMed2006

Application of headspace solid phase microextraction to qualitative and quantitative analysis of tobacco additives in cigarettes.

Cigarettes may contain up to 10% by weight additives which are intended to make them more attractive. A fast and rugged method for a cigarette-screening for additives with medium volatility was developed using automatic headspace solid phase microextraction (HS-SPME) with a 65 microm carbowax-divinylbenzene fiber and gas chromatography-mass spectrometry (GC-MS) with standard electron impact ionisation. In three runs, each cigarette sample was extracted in closed headspace vials using basic, acidic and neutral medium containing 0.5 g NaCl or Na2SO4. Furthermore, the method was optimized for quantitative determination of 17 frequently occurring additives. The practical applicability of the method was demonstrated for cigarettes from 32 brands.

Gas Chromatography-Mass Spectrometry↗
PubMed2006

Isolation of human serum immunoglobulins with a new salt-promoted adsorbent.

In this work a highly acetylated-ethylenediamine-Novarose (HA-EDA-Novarose) gel was synthesized and used as a new agarose-based salt-promoted adsorption chromatography (SPAC) matrix to effectively isolate serum immunoglobulins without the need of denaturing conditions. Samples of human serum in 0.5 M Na2SO4, 10 mM 3-(N-morpholino)-propane-sulfonic acid (MOPS), pH 7.6 were applied to a chromatographic column packed with the SPAC gel. Immunoglobulins (Igs) with affinity for the HA-EDA ligands were specifically adsorbed to the matrix, non-bound serum proteins were readily removed by washing the column with the same feed solution buffer. Bound Igs were effectively and very gently eluted by simply removing the salt from the feed solution buffer. The elution buffer consisted thus of only 10 mM MOPS, at pH 7.6 and no salt. The salt-dependent adsorption capacity of this system was estimated to be 7.3 mg/ml with protein recovery of about 93%. Sodium dodecyl sulfate-polyacrylamide gel (SDS-PAGE) electrophoresis analysis, radial immunodiffusion and enzyme-linked immunosorbent assays showed that immunoglobulins G, M and A (IgG, IgM and IgA) were the main components present in the elution fraction. The new SPAC adsorbent was used to purify Igs from human serum and IgG and IgA from non-pure commercially available Igs preparations in a very gentle single step.

Adsorption↗
PubMed2006

Novel hydrophobic interaction chromatography matrix for specific isolation and simple elution of immunoglobulins (A, G, and M) from porcine serum.

A new, highly acetylated agarose matrix (HA-Sepharose) was synthesized and used as a hydrophobic interaction chromatography (HIC) medium to specifically isolate immunoglobulins (Igs) from porcine serum. Recovery of Igs was in a single step and under mild conditions. HA-Sepharose adsorption was studied in terms of salt, gel acetylation time, flow rate, and protein concentration on the loading buffer. At 0.5 M Na2SO4, control with unmodified Sepharose retained a small fraction (0.70 mg/mL of matrix) of serum albumin. On the contrary HA-Sepharose retained primary Igs (IgA, IgG, and 53% of IgM) as revealed by sodium dodecyl sulphate 10% polyacrylamide gel electrophoresis (SDS-PAGE), quantitative radial immunodiffusion and immunodetection. At a flow rate of 1 mL/min, the HA-Sepharose column capacity (3.9 mg/mL of matrix) was similar to the reported capacity for the commercial thiophilic T-gel. However, HA-Sepharose showed higher recovery of IgA and IgM than the T-gel in the same salt conditions, clearly an advantage in terms of immunoglobulin recovery strategies. Acetylation changed the matrix adsorption from albumin to immunoglobulins; thus, the highly acetylated gel rendered recoveries of Igs from unprocessed porcine serum practically free of albumin.

Adsorption↗
PubMed2006

Determination of bromate ion in drinking water by capillary zone electrophoresis with direct photometric detection.

Bromate ion in drinking water was determined by capillary zone electrophoresis (CZE) with direct photometric detection. Bromate ion in the sample solution was introduced and concentrated into the capillary by electrokinetic injection for 50s at -10 kV. Electrophoretic separation was made at an applied voltage of -25 kV and bromate ion was detected at wavelength 193 nm, at which the baseline was stabilized with less UV-absorbing acidic phosphate buffer. Bromate ion was detected within 5 min in the electropherogram. By increasing the electric conductivity in the migrating solution with 10 mM Na2SO4, a limit of detection (LOD) of 9 x 10(-10)M (0.1 microg/L BrO3-) was achieved. The proposed method was applied to the analysis of tap water and river water samples, but bromate ion was not detected. Because the practical samples contain relatively large amount of foreign ionic substances, the tap water sample was diluted to avoid the matrix ions. Bromate ion added in a tap water at the concentration of 8 x 10(-8)M was quantitatively recovered by diluting it 1/10.

Bromates↗
PubMed2006

The influence of salt type on the retention of bovine serum albumin in ion-exchange chromatography.

In this paper, an analysis of the influence of the salt types, NaCl, NaCH3COO, Na2SO4 and Na3C6H5O7, on the isocratic retention behaviour of bovine serum albumin (BSA) on two anion-exchangers media (Source 30Q and TSK Gel Super Q 5 PW) has been presented. The retention data demonstrated that the mechanism of protein retention in ion-exchange chromatography (IEC) involves interactions between the protein solute, the mobile phase constituents and the stationary phase. The effect of protein activity coefficient in the mobile phase on the protein retention volumes is verified.

Adsorption↗
PubMed2006

Surfactive water-soluble copolymers for the preparation of controlled surface nanoparticles by double emulsion/solvent evaporation.

We have already shown that polylactide (PLA) nanoparticles covered with a hydrophilic polymeric layer can be prepared by simple emulsion/solvent evaporation by using amphiphilic copolymers as surfactants during the procedure. The external layer is then constituted by the hydrophilic part of the macromolecular surfactant. This kind of nanospheres is useful for the encapsulation of lipohilic molecules. The use of amphiphilic copolymers as surfactants in the preparation of PLA nanospheres with controlled surface properties, was then applied to the double emulsion/solvent evaporation procedure. The aim was to allow the encapsulation of water-soluble bioactive molecules in PLA particles with controlled surface properties. In this paper, we describe the results obtained with three different water-soluble monomethoxypolyethylene oxide (MPEO)-b-PLA diblock copolymers used as surfactants in the preparation of nanoparticles by double emulsion/solvent evaporation. After organic solvent evaporation, the obtained nanospheres were proved to be really covered by a MPEO layer whose characteristics were determined. It was firstly shown that the MPEO-covered particles did not flocculate at 25 degrees C, even in 4 M NaCl while suspensions of bare nanospheres were destabilized for a NaCl concentration as low as 0.04 M. On the other hand, the suspensions of MPEO-covered nanoparticles in 0.3 M Na2SO4 were found to be very sensitive to temperature as they flocculated at a temperature lying between 45 and 55 degrees C depending on the MPEO-b-PLA composition. This property was attributed to the fact that MPEO is a polymer with a low critical solution temperature. The concentration of MPEO at the nanoparticle surface was then calculated for the three kinds of particles, from the initial flocculation temperature, and was found to be comparable to the value determined directly.

Biocompatible Materials↗
PubMed2005

The effects of salinity on naphthenic acid toxicity to yellow perch: gill and liver histopathology.

Naphthenic acids (NAs) are naturally occurring saturated linear and cyclic carboxylic acids found in petroleum, including the bitumen contained in the Athabasca Oil Sands deposit in Alberta, Canada. The processing of these oil sands leads to elevated concentrations of NAs, as well as increased salinity from produced waters as a result of ions leaching from the ores, the process aids, and the water associated with the deeper aquifers. These changes can result in waters that challenge reclamation of impacted waters associated with oil sands development. Laboratory tests examined the effects of salinity on NA toxicity using local young-of-the-year yellow perch exposed to a commercially available mixture of NAs (CNA) and an NA mixture that was extracted from oil sands process-affected water (ENA), with and without the addition of sodium sulfate (Na(2)SO(4)). Gill and liver histopathological changes were evaluated in the surviving fish after 3 weeks of exposure. At 6.8 mg/L ENA and 3.6 mg/L CNA, 100% mortality was observed, both with and without the addition of salt. Exposure of yellow perch to 25% of the NA required to give an LC100 (0.9 mg/L CNA; 1. 7 mg/L ENA) resulted in high levels of gill proliferative (epithelial, mucous, and chloride cell) changes, a response that was increased with the addition of 1g/L salt (Na2SO4) for the ENA. The significance of these changes was a reduced gill surface area, which likely caused a reduction in both the transport of NAs within the fish and the exchange of vital respiratory gases. While the gills were affected, no liver alterations were identified following NA or NA+salt exposures. Differences in the chemical composition of the NAs tested may explain the differences in the lethality and histopathology of yellow perch.

Animals↗
PubMed2005

Effects of nitrogen with and without acidified sulphur on an ectomycorrhizal community in a Sitka spruce (Picea sitchensis Bong. Carr) forest.

This preliminary study investigated the effects of enhanced nitrogen (NH4NO3 at 48 kg ha(-1) y(-1)), sulphur (Na2SO4 at 50 kg ha(-1) y(-1)), acidified nitrogen and sulphur (H2SO4 + NH4NO3) at pre-stated doses (pH 2.5), and acidified nitrogen and sulphur deposition at double these doses on the ectomycorrhizal community associated with a 13-year-old Sitka spruce (Picea sitchensis) forest. Sulphur deposition had little impact on below ground ectomycorrhizal diversity, but stimulated sporocarp production. Nitrogen inputs increased below ground colonisation compared to acidified nitrogen and sulphur, largely due to an increase in Tylospora fibrillosa colonisation. Sporocarp production and ectomycorrhizal root colonisation by Lactarius rufus were reduced in the nitrogen treated plots. These observations suggest that nitrogen deposition to a young plantation may suppress ectomycorrhizal fungi producing large sporocarps. It is proposed that enhanced nitrogen deposition increases ectomycorrhizal nitrogen assimilation, consuming more carbon and leaving less for extrametrical mycelium and sporocarp development.

Acid Rain↗
PubMed2004

Laccase from Melanocarpus albomyces binds effectively to cellulose.

A laccase from the thermophilic fungus Melanocarpus albomyces was shown to bind to softwood and pure microcrystalline cellulose. The binding isotherm fitted well the Langmuir type one-site binding model. The adsorption parameters indicated that M. albomyces laccase binds with high affinity to cellulose with a relatively low maximum binding capacity, as compared to the values for various cellulases. The binding was shown to be reversible and not influenced by non-specific protein or 0.1-0.5 M Na2SO4. No binding was detected with laccases from Trametes hirsuta or Mauginiella sp., which suggests that binding to cellulose is typical for only some laccases.

Adsorption↗
PubMed2004

Effect of inorganic salts on crystallization of poly(ethylene glycol) in frozen solutions.

The effect of inorganic salts on eutectic crystallization of poly(ethylene glycol) (PEG) 1500-20,000 in frozen solution was studied to model the polymer and inorganic salt interaction in freeze-dried formulations. Thermal analysis of an aqueous PEG 3000 solution showed a eutectic PEG crystallization exotherm at approximately -47 degrees C and a subsequent PEG crystal melting endotherm at -14.9 degrees C. Addition of sodium chloride prevented the PEG crystallization in the freeze-concentrated solution surrounding ice crystals. Higher concentration NaCl was required to retain higher molecular weight PEG in the amorphous state. Various inorganic salts prevented the PEG crystallization to varying degrees depending mainly on the position of the anion in the Hofmeister's lyotropic series. Some salting-in and 'intermediate' salts (NaSCN, NaI, NaBr, NaCl, LiCl, KCl, and RbCl) inhibited the crystallization of PEG 7500 in frozen solutions. On the other hand, salting-out salts (NaH2PO4, Na2HPO4, Na2SO4, and NaF) did not show an apparent effect on the PEG crystallization. Some salting-out salts induced PEG crystallization in PEG and sucrose combination frozen solutions. The varying abilities of salts to prevent the PEG crystallization in frozen solutions strongly suggested that the solutes had different degrees of miscibility in the freeze-concentrates.

Crystallization↗
PubMed2004

Preparation of Y2O3:Eu3+ nanoparticles in reverse micellar systems and their photoluminescence properties.

Y2O3:Eu3+ phosphor nanoparticles (4-8 nm in size) with spherical morphology and narrow size distribution were obtained by calcination of composite Y-Eu hydroxide nanoparticles, which were prepared in sodium bis(2-ethylhexyl)sulfosuccinate (AOT)/isooctane or polyethylene glycol mono-4-nonylphenyl ether (NP-5)/cyclohexane reverse micellar systems. This was achieved by the incorporation of the Y-Eu hydroxide nanoparticles into polyurea (PUA) via in situ polymerization of hexamethylene diisocyanate (HDI) in the reverse micellar solution and subsequent calcination of the resulting PUA materials. The emission intensity of the Y2O3:Eu3+ nanoparticles, prepared in the AOT/isooctane system, was significantly lower than that of the micrometer-size particles prepared in a homogeneous aqueous solution, since the calcined nanoparticles contained Na2SO4 impurity derived from the remaining AOT surfactant. The nanoparticles prepared in the NP-5/cyclohexane system, in contrast, showed higher emission intensity compared to the nanoparticles prepared in the AOT/isooctane system and longer luminescence lifetime compared to the micrometer-size particles prepared in the homogeneous aqueous solution. The photoluminescence intensity of Y2O3:Eu3+, prepared via the proposed process was found to decrease with decreasing the particle size.

Journal Article↗
PubMed2005

Hofmeister effects on the colloidal stability of an IgG-coated polystyrene latex.

The effect of various ions related to the Hofmeister series (HS) on different properties of a cationic latex covered with a protein (IgG) is analyzed in this study. NaNO3, NH4NO3, and Ca(NO3)2 were used to compare the specificity of the cations, and NaCl, NaSCN, NaNO3, and Na2SO4, to compare the specificity of the anions. Two pH values, 4 and 10, were chosen to analyze the behavior of these ions acting as counter- and co-ions. At pH 4, the total surface charge is positive, whereas at pH 10 it is negative. Three different phenomena have been studied in the presence of these Hofmeister ions: (1) colloidal aggregation, (2) electrophoretic mobility, and (3) colloidal restabilization. The specific effect of the ions was clearly observed in all experiments, obtaining ion sequences ordered according to their specificity. The most important parameter for ion ordering was the sign of the charge of the colloidal particle. Positively charged particles displayed an ion order opposite that observed for negatively charged surfaces. Another influential factor was the hydrophobic/hydrophilic character of the particle surface. IgG-latex particle surfaces at pH 10 were more hydrophilic than those at pH 4. The SCN- ion had a peculiar specific effect on the phenomena studied (1)-(3) at pH 10. With respect to the restabilization studies at high ionic strengths, new interesting results were obtained. Whereas it is commonly known that cations may provoke colloidal restabilization in negative particles when they act as counterions, our experiments demonstrated that such restabilization is also possible with positively charged particles. Likewise, restabilization of negative surfaces induced by the specific effect of chaotropic anions (acting as co-ions) was also observed.

Adsorption↗
PubMed2005

Adsorption of cationic polyelectrolyte at the solid/liquid interface and dispersion of nanosized silica in water.

Adsorption of cationic polyelectrolyte, a homopolymer of maleimide propyl trimethylammonium chloride (MPTMAC), on silica nanoparticles from aqueous solution was studied. The adsorbed amount of MPTMAC and the adsorption layer thickness from solutions of different pH, polyelectrolyte concentration, salt type, and salt concentration were measured. The adsorbed amount exhibited a maximum as a function of the electrolyte concentration. The onset of the decline in the adsorbed amount depended on the type of counterions. The thickness of the adsorption layer increased gradually with increased of electrolyte concentration and leveled off at high electrolyte concentration. The enhanced adsorption in the presence of Na2SO4 can be explained by the bivalent SO4(2-) causing a better shielding effect. With increasing pH the adsorbed amount of MPTMAC increased, whereas the thickness of an adsorbed layer of MPTMAC decreased. At low polyelectrolyte concentrations unstable silica suspensions were observed from a stability test. At high polyelectrolyte concentrations the higher particle coverage caused electrosteric stabilization of the dispersion. However, further increase in MPTMAC concentration after saturated adsorption would flocculate the dispersed system. At low pH, MPTMAC tending to create a loops or tails conformation stabilized the suspension.

Journal Article↗