Search PubMed⌕ Search

SEARCH · Search PubMed

Results for “Microspheres”

Search indexed PubMed citations on genomics, clinical trials, systematic reviews and public health. Explore titles, authors and supplied subject terms, then open the PubMed record.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 289 records · Page 16Linked to original sources

Chitosan/cellulose acetate microspheres preparation and ranitidine release in vitro.

New microspheres containing hydrophilic core and hydrophobic coating as a controlled-release system with no toxic reagents were proposed. Water in oil in water (W/O/W) emulsion and solvent evaporation methods were used to make chitosan/ cellulose acetate (CCA) microspheres sized 200 - 400 microm. Ranitidine hydrochloride, as a model drug, was investigated for its release properties in vitro. The loading efficiency and release rate of ranitidine were affected by chitosan concentration and molecular weight. Higher loadings were obtained at lower concentrations in the interval of 1% to 2%. With chitosan at a 2% concentration microspheres could be obtained with more spherical appearance, smaller size, and higher ranitidine loading efficiency microspheres than at other concentrations. Among the different molecular weight chitosan (47, 145, 308, 499, and 1130 KD) microspheres, the high molecular weight chitosan (1130 KD) microspheres had relatively high loading efficiency (10%). Molecular weight and concentration of chitosan as well as the size of microspheres affected the release of ranitidine. Microspheres smaller than 280 microm released the drug faster than did the bigger by about 10%. The optimal condition for the preparation of the microspheres was chitosan concentration 2%, molecular weight 1130 KD. The ranitidine release from the microspheres was 30% during 48 h in phosphate-buffer saline medium.

Administration, Oral↗

Microscopic analysis of arterial microsphere distribution in rabbit liver and hepatic VX2 tumor.

Microspheres conjugated to radioisotopes and chemotherapeutic agents are playing an important investigative and clinical role in the management of metastatic neoplasms. The purpose of our investigation was to histologically assess the basis for regional intra-arterial microsphere therapy, by comparing the spatial distribution of microspheres in the tumor and liver of experimental models of hepatic metastases. Three New Zealand white rabbits with hepatic VX2 tumor implants were arterially injected with hepatic doses of either 15 or 30 million blue-dyed, polystyrene microspheres (27 microns-diameter). Microscopic examination of random liver and tumor samples revealed that 6-12 times as many microspheres were embolized within tumor than in normal liver (p less than 0.002). The majority of microspheres aggregated into clusters of various size within liver and tumor vasculature, though analysis of cluster sizes illustrated an exponentially skewed distribution toward isolated microspheres. Approximately eight times as many clusters were observed in tumor than in liver (p less than 0.008). Finally, a morphometric analysis was used to quantitate the minimal distances separating microsphere clusters, the intercluster distance (ICD). Analysis of over three thousand intercluster measurements revealed a median ICD approximately five times lower in tumor than in liver (p less than 1 x 10(-8)). This microquantitative analysis provides a fundamental description of how regional intra-arterial microsphere therapy allows the targeted delivery of microspheres to neoplastic tissue, to potentially improve the therapeutic index in the treatment of hepatic metastases.

Animals↗

Chemotherapeutic potential of alginate-chitosan microspheres as anti-tubercular drug carriers.

OBJECTIVES: This study was designed to develop alginate-chitosan microspheres as drug carriers to reduce dose/dosing frequency in the management of tuberculosis (TB), which otherwise demands prolonged chemotherapy. METHODS: Alginate-chitosan microspheres encapsulating three frontline anti-tuberculous drugs (ATDs), rifampicin, isoniazid and pyrazinamide, were formulated. A therapeutic dose and a half-therapeutic dose of the microsphere-encapsulated ATDs were orally administered to guinea pigs for pharmacokinetic/chemotherapeutic evaluations, respectively. RESULTS: The drug encapsulation efficiency ranged from 65% to 85% with a loading of 220-280 mg of drug per gram microspheres. Administration of a single oral dose of the microspheres to guinea pigs resulted in sustained drug levels in the plasma for 7 days and in the organs for 9 days. The half-life and mean residence time of the drugs were increased 13- to 15-fold by microsphere encapsulation, along with an enhanced relative/absolute bioavailability. The sustained release and increase in bioavailability were also observed with a sub-therapeutic dose of the microspheres. In Mycobacterium tuberculosis H37Rv-infected guinea pigs, administration of a therapeutic dose of microspheres spaced 10 days apart produced a clearance of bacilli equivalent to conventional treatment for 6 weeks. The most important observation, however, was the documentation of therapeutic benefit with a half-therapeutic dose of the microspheres administered weekly. CONCLUSION: Alginate-chitosan microspheres hold promise as a potential natural polymer-based oral ATD carrier for better management of TB.

Alginates↗

Prolonged intercostal nerve blockade in sheep using controlled-release of bupivacaine and dexamethasone from polymer microspheres.

BACKGROUND: Previous work from the authors' group characterized a prolonged percutaneous blockade of the sciatic nerve in rats using bupivacaine-dexamethasone microspheres. The goals of the current study are to examine the (1) efficacy of bupivacaine microspheres with and without dexamethasone for intercostal blockade in sheep; (2) scaling of dose and duration with a 100-fold increase in body size from rats to sheep; (3) local toxicity and adverse systemic reactions to bupivacaine microspheres with and without dexamethasone. METHODS: Intercostal blocks were performed percutaneously in sedated sheep. Sensory blockade was measured at repeated time points by absent flinch response to skin pinch. Plasma bupivacaine concentrations were measured using high performance liquid chromatography. Chest wall specimens were examined by light microscopy. RESULTS: The duration of intercostal blockade increased with bupivacaine dose for animals receiving from 8 to 80 mg/kg of microspheres with and without dexamethasone. At each dose, microspheres containing dexamethasone had a longer duration of block than microspheres without dexamethasone. From 8 to 80 mg/kg, the mean duration of block with bupivacaine-dexamethasone microspheres increased from 4 to 13 days. Plasma concentrations of bupivacaine remained 10-fold below the convulsive EC50 concentration for sheep. Chest wall histology showed a significant granulomatous reaction around bupivacaine microspheres but not around bupivacaine-dexamethasone microspheres. CONCLUSIONS: A single administration of bupivacaine-dexamethasone microspheres produces an effective chest wall analgesia of several days' duration. This may prove useful clinically for thoracic surgery or trauma.

Anesthetics, Local↗

Commonly used numbers of microspheres affect cardiac vascular resistance.

The main goal of the study was to examine how the microsphere technique affects the hemodynamics and mitochondrial energy status of the Langendorff-perfused rat heart. The hearts were perfused at a constant flow with Tyrode solution. NADH videofluorometry of the surface of the left ventricle was used to record the mitochondrial energy status as indication of regional ischemia. The effects of seven successive (separated by 10 min) injections of 0.1 ml of saline or (0.05% Tween 20; polysorbate 20, Sigma-Aldrich, St. Louis, MO, U.S.A.) or (0.05% Tween 20 + microspheres) were studied. The number of microspheres per injection were: #1 (2,500), #2 (5,000), #3 (10,000), #4 (20,000), #5 (40,000), #6 (40000), and #7 (80000). The anti-aggregation agent Tween always caused a biphasic response in perfusion pressure. Compared with the Tween effect, the injection of microspheres caused an initial change (mm Hg) in perfusion pressure of #1 (-10), #2 (NS), #3 (NS), #4 (+7.5), #5 (+12.3), #6 (+14.4), #7 (+18.3), and a delayed change (10 min after injection) of #1 (-22.2), #2 (-6.0), #3 (-4.1), #4 (-4.5), #5 (NS), #6 (NS), and #7 (+5.9). The microspheres caused a significant delayed increase in NADH only for injection #6 and #7. Similar results were found for different durations of the input function or when hearts were perfused at constant perfusion pressure. In hearts without flow reserve (10 microM adenosine), Tween injections were without effect, whereas three successive injections of 60,000 microspheres each only caused increases in perfusion pressure and NADH. The data demonstrate that in hearts with flow reserve present, even very low numbers of microspheres (2,000/g heart) cause large decreases in perfusion pressure without obvious signs of ischemia. When flow reserve was exhausted by either microsphere loading or adenosine addition, microspheres only caused increases in perfusion pressure and resulted in detectable ischemia (NADH). It is concluded that microspheres affect the vascular resistance of the heart and that these effects are flow reserve dependent.

Animals↗

Effect of stereotactic implantation of biodegradable 5-fluorouracil-loaded microspheres in healthy and C6 glioma-bearing rats.

OBJECTIVE: Poly(lactic acid-co-glycolic acid) (PLAGA) microspheres are promising systems for interstitial chemotherapy of brain tumors. They can be readily implanted by stereotaxy and are biocompatible with the brain, in which they are totally biodegraded within 2 months. 5-Fluorouracil (5-FU) was selected for encapsulation, because this hydrophilic and antimetabolic drug is not directly neurotoxic and does not readily cross the blood-brain barrier. Also, its anticancer activity may be improved by sustained administration. Furthermore, it is a potent radiosensitizer. METHODS: To study their fate and toxicity, two types of 5-FU-loaded PLAGA microspheres were implanted in healthy rats by stereotaxy. One type presented a fast in vitro release profile (FR), and the second exhibited a slow in vitro release pattern (SR) (100% of the encapsulated 5-FU is released within 72 hours and 18 days, respectively). Periodically, rats were killed for microscopic examination. The efficacy of these microspheres on rat glioma was then evaluated. Seven days after stereotactic implantation of C6 malignant glioma cells in the brain, the rats were treated by intratumoral injection of 5-FU solution, blank microspheres, or 5-FU-loaded microspheres (FR and SR types). The mortality of these treated groups was compared by the log-rank test with that of an untreated group. RESULTS: After implantation of two types of 5-FU-loaded PLAGA microspheres, no sign of clinical or histological toxicity was observed. Entrapped 5-FU crystals were observed until Days 12 and 20 postimplantation within FR and SR microspheres, respectively, which suggests a longer releasing period in vivo than in vitro. In the therapeutic evaluation, only intratumoral implantation of SR-type 5-FU-loaded microspheres significantly decreased the mortality (P = 0.017). CONCLUSION: 5-FU-loaded PLAGA microspheres were implanted in rat brains without evident toxicity. Histological examination suggested a longer sustained delivery period in vivo than in vitro. Intratumoral implantation of SR-type 5-FU-loaded microspheres decreased the mortality of C6 tumor-bearing rats. This effect can be related to the local and the sustained delivery of the drug, because 5-FU administered systemically is ineffective against brain tumors.

Animals↗

Increased free fat-graft survival with the long-term, local delivery of insulin, insulin-like growth factor-I, and basic fibroblast growth factor by PLGA/PEG microspheres.

The present investigation evaluates the effects of long-term, local delivery of insulin, insulin-like growth factor-1 (IGF-1), and basic fibroblast growth factor (bFGF) on fat-graft survival using a poly (lactic-co-glycolic-acid)-polyethylene glycol (PLGA/PEG) microsphere delivery system. Twelve-micrometer PLGA/PEG microspheres incorporated separately with insulin, IGF-1, and bFGF were manufactured using a double-emulsion solvent-extraction technique. Inguinal fat from Sprague Dawley rats was harvested, diced, washed, and mixed with (1) insulin microspheres, (2) insulin-like growth factor-1 microspheres, (3) basic fibroblast growth factor microspheres, (4) a combination of the insulin and IGF-1 microspheres, and (5) a combination of insulin, IGF-1, and bFGF microspheres. The treated fat grafts were implanted autologously into subdermal pockets in six animals for each group. Animals receiving untreated fat grafts and fat grafts treated with blank microspheres constituted two external control groups (six animals per external control group). At 12 weeks, all fat-graft groups were compared on the basis of weight maintenance and a histomorphometric analysis of adipocyte area percentage, indices of volume retention and cell composition, respectively. Weight maintenance was defined as the final graft weight as a percent of the implanted graft weight. All growth factor treatments significantly increased fat-graft weight maintenance objectively, and volume maintenance grossly, in comparison with the untreated and blank microsphere-treated controls. Treatment with insulin and IGF-1, alone or in combination, was found to increase the adipocyte area percentage in comparison with fat grafts treated with bFGF alone or in combination with other growth factors. In conclusion, the findings of this study indicate that long-term, local delivery of growth factors with PLGA/PEG microspheres has the potential to increase fat-graft survival rates. Further, the type of growth factor delivered may influence the cellular/stromal composition of the grafted tissue.

Adipose Tissue↗

The formation and characterization of hydrocortisone-loaded poly((+/-)-lactide) microspheres.

The solvent evaporation process has been used to form hydrocortisone-loaded microspheres from poly((+/-)-lactide) (PLA) and a lactide-glycolide copolymer (65/35). Methylene chloride was the casting solvent. Partially hydrolysed (88%) poly(vinyl alcohol) and methylcellulose were used as aqueous phase emulsifiers. Methylcellulose was preferred, because it gave stable emulsions as the amount of hydrocortisone being encapsulated increased whereas poly(vinyl alcohol) did not. With methylcellulose as the emulsifier, a broad size range of spherical microspheres containing up to 50% (w/w) hydrocortisone could be prepared. Thermal and X-ray analyses established that poly((+/-)-lactide) microspheres containing hydrocortisone retained thermal events characteristic of both materials. This is evidence that such microspheres contain, to some extent, crystalline hydrocortisone domains dispersed in a PLA matrix. But most of the encapsulated drug was molecularly dispersed in the PLA glass. The stability of hydrocortisone in microspheres was evaluated in different storage conditions: no degradation of drug was found. The release of hydrocortisone from 250-350 microns diameter microspheres into agitated 37 degrees C water (nitrogen atmosphere) was determined by HPLC analysis. The microspheres evaluated had initial hydrocortisone payloads of 12 to 47% (w/w). The rate of drug release increased as the initial drug payload carried by the microspheres increased. The release data are not adequately described by zero order, first order, or square-root-of-time release kinetics. Drug release from microspheres that contain 12% (w/w) hydrocortisone approached a plateau value well below the amount of drug actually carried by the microspheres. This is particularly true for hydrocortisone encapsulated in lactide-glycolide polymer.

Calorimetry, Differential Scanning↗

The relationship between intrahepatic portal systemic shunts and microsphere induced portal hypertension in the rat liver.

BACKGROUND: Portal hypertension is associated with gross haemodynamic disturbances characterised by high cardiac output, low peripheral vascular resistance, increased splanchnic blood flow, and portal systemic shunting. AIMS: To study the relationship between intrahepatic portal systemic shunts and microsphere induced portal hypertension in the rat liver. METHODS: Different sized microspheres were sequentially injected into the portal vein of male Wistar rats. RESULTS: Steady state portal venous pressure was increased by 102.2 (35.6)% (14.9 (3.6) mm Hg) and 272.3 (78.0)% (24.0 (2.2) mm Hg) above the basal pressure following sequential injections of 15 and 80 microns diameter microspheres, respectively. Sequential injection of 15, 40, and 80 microns diameter microspheres in either ascending or descending order of size did not generate further increases in portal venous pressure. A single injection of 1.8 x 10(5) 80 microns microspheres consistently produced a steady state portal venous pressure of 19.0 (1.3) mm Hg but did not approach the much higher value of 36.6 (43.2) mm Hg measured during clamping of the portal vein. These data indicate that the opening of patent intrahepatic shunts was responsible for the reduced pressures observed during microsphere injections and further evidence for this was provided by the location of microspheres in the pulmonary vascular bed. The elevation in portal venous pressure achieved by microsphere injections was not significantly different to that produced in rats subjected to partial portal vein ligation (20.7 (0.5) mm Hg, p > 0.05). Wedged hepatic venous pressure decreased from 6.7 (0.7) to 3.0 (0.6) mm Hg following injection of 80 microns microspheres, suggesting a decrease in total hepatic blood flow. Conversely, injection of 15 microns microspheres induced an increase in wedged hepatic venous pressure from 7.0 (1.0) mm Hg to 12.4 (1.8) mm Hg, indicating a localised redistribution of blood flow at the presinusoidal level of the portal venous vascular network and increased intrahepatic shunt flow. CONCLUSION: It is suggested that there may be a protective pathophysiological role for these shunts when the liver is subjected to changes which induce acute portal hypertension.

Acute Disease↗

Stability of 8-, 15-, and 26-micron microspheres entrapped in feline myocardium.

The stability of 8-, 15-, and 26-micron radioactive microspheres entrapped in ischemic and nonischemic myocardium and possible mechanisms for microsphere loss were investigated. Anesthetized cats were given microspheres prior to left anterior descending coronary artery occlusion (or sham operation) and 8 h later. Eight-micron microspheres, compared with 15-micron spheres, underestimated preocclusion myocardial blood flow in ischemic and nonischemic tissue by 30%. With 26-micron spheres, endocardial-to-epicardial blood flow ratio was 1.28. In nonischemic tissue, no loss of 15- and 26-micron microspheres occurred during 8 h. In ischemic myocardium, however, 15% apparent loss of 15- and 26-micron preocclusion spheres took place. In endocardial ischemic tissue, edema could account for 50% of the 15-micron microsphere loss and almost completely for loss of 26-micron spheres. In epicardial ischemic tissue, microsphere loss was not influenced by edema. We found no hemodynamic variable that could predict the magnitude of microsphere loss. Only weak evidence for migration of 15- and 26-micron microspheres through lymphatic pathways was found. Most likely the spheres migrated through venous pathways to embolize in the lungs. We conclude that 15-micron microspheres provide the most reliable tissue blood flow estimates in normal myocardium, but even for these spheres significant loss occurs during 8 h of ischemia.

Animals↗

Quantification of arteriolar density and embolization by microspheres in rat myocardium.

We developed a technique for in vitro determination of arteriolar densities. Hearts, obtained from anesthetized rats and perfused by the Langendorff method, were fully dilated with adenosine and were arrested with an elevated potassium concentration. After a stabilization period, the hearts were perfused with a buffered fixative for some minutes to obtain a nonvital vasculature. After fixation, perfusion was switched back to control for some minutes. The hearts were then perfused with a medium containing a low concentration of microspheres: either pollen grains [Urtica dioica (15.4 microns), Betula (23.5 microns), or Phleum pratense (36.5 microns)] or polystyrene microspheres (15 microns). The perfusion was switched back to the standard medium after flow had been reduced to between 83 and 57% of control flow. Microscopic observations of microsections revealed that the percentages of arterioles embolized by one microsphere were 64% for the 15.4-microns, 74% for the 15-microns, 78% for the 23.5-microns, and 72% for the 36.5-microns microspheres. The percentages of arterioles embolized with two microspheres were 20, 15, 15, and 16%, respectively. The arteriolar densities were calculated from the total fractional reduction in coronary flow, the amount of microspheres injected, the wet heart weight, and the degree of occupancy, which corrects for the multiple embolization of the arterioles. The arteriolar densities in the rat hearts were 162.4 +/- 54.9 mg-1 (N = 6) for polystyrene microspheres of 15 microns, 161.5 +/- 81.1 mg-1 (N = 15) for 15.4-microns microspheres, 31.6 +/- 7.8 mg-1 (N = 9) for 23.5-microns microspheres, and 13.0 +/- 2.4 mg-1 (N = 8) for 36.5-microns microspheres.

Animals↗

The use of poly(lactic-co-glycolic acid) microspheres as injectable cell carriers for cartilage regeneration in rabbit knees.

The use of injectable scaffolding materials for in vivo tissue regeneration has raised great interest because it allows cell implantation through minimally invasive surgical procedures. Previously, we showed that poly(lactic-co-glycolic acid) (PLGA) microspheres can be used as an injectable scaffold to engineer cartilage in the subcutaneous space of athymic mice. The purpose of this study was to determine whether PLGA microspheres can be used as an injectable scaffold to regenerate hyaline cartilage in the osteochondral defects of rabbit knees. A full-thickness wound to the patellar groove of the articular cartilage was made in the knees of rabbits. Rabbit chondrocytes were mixed with PLGA microspheres and injected immediately into these osteochondral wounds. Both chondrocyte transplantations without PLGA microspheres and culture medium injections without chondrocytes served as controls. Sixteen weeks after implantation, chondrocytes implanted using the PLGA microspheres formed white cartilaginous tissues. Histological scores indicating the extent of the cartilaginous tissue repair and the absence of degenerative changes were significantly higher in the experimental group than in the control groups (P < 0.05). Histological analysis by a hematoxylin and eosin stain of the group transplanted with microspheres showed thicker and better-formed cartilage compared to the control groups. Alcian blue staining and Masson's trichrome staining indicated a higher content of the major extracellular matrices of cartilage, sulfated glycosaminoglycans and collagen in the group transplanted with microspheres than in the control groups. In addition, immunohistochemical analysis showed a higher content of collagen type II, the major collagen type in cartilage, in the microsphere transplanted group compared to the control groups. In the group transplanted without microspheres, the wounds were repaired with fibro-cartilaginous tissues. This study demonstrates the feasibility of using PLGA microspheres as an injectable scaffold for cartilage regeneration in a rabbit model of osteochondral wound repair.

Animals↗

Preparation and characterization of gelatin surface modified PLGA microspheres.

This study optimized conditions for preparing and characterizing gelatin surface modified poly (lactic-co-glycolic acid) (PLGA) copolymer microspheres and determined this system's interaction with fibronectin. Some gelatin microspheres have an affinity for fibronectin-bearing surfaces; these microspheres exploit the interaction between gelatin and fibronectin. PLGA copolymer microspheres were selected because they have reproducible and slow-release characteristics in vivo. The PLGA microspheres were surface modified with gelatin to impart fibronectin recognition. Dexamethasone was incorporated into these microspheres because dexamethasone is beneficial in chronic human diseases associated with extra fibronectin expression (eg, cardiovascular disease, inflammatory disorders, rheumatoid arthritis). The gelatin surface modified PLGA microspheres (prepared by adsorption, conjugation, and spray coating) were investigated and characterized by encapsulation efficiency, particle size, in vitro release, and affinity for fibronectin. The gelatin-coated PLGA microspheres had higher interaction with fibronectin compared with the other gelatin surface modified PLGA microspheres (adsorption and conjugation). Dexamethasone was released slowly (over 21 days) from gelatin surface modified PLGA microspheres.

Anti-Inflammatory Agents↗

Albumin microspheres as carriers for the antiarthritic drug celecoxib.

The present study investigates the preparation of celecoxib-loaded albumin microspheres and the biodistribution of technetium-99m ((99m)Tc)-labeled celecoxib as well as its microspheres after intravenous administration. Microspheres were prepared using a natural polymer BSA using emulsification chemical cross-linking method. The prepared microspheres were characterized for entrapment efficiency, particle size, and in vitro drug release. Surface morphology was studied by scanning electron microscopy. Biodistribution studies were performed by radiolabeling celecoxib (CS) and its microspheres (CMS) using (99m)Tc and injecting arthritic rats intravenously. The geometric mean diameter of the microspheres was found to be 5.46 microm. In vitro release studies indicated that the microspheres sustained the release of the drug for 6 days. Radioactivity measured in different organs after intravenous administration of celecoxib solution showed a significant amount of radioactivity in the liver and spleen. In case of celecoxib-loaded microspheres, a significant amount of radioactivity accumulated in the lungs. No significant difference (P > .1) in the radioactivity was observed between the inflamed joint and the noninflamed joint following intravenous injection of (99m)Tc-CS. However, in case of the microspheres (CMS), the radioactivity present in the inflamed joint was 2.5-fold higher than in the noninflamed joint. The blood kinetic studies revealed that celecoxib-loaded albumin microspheres exhibited prolonged circulation than the celecoxib solution.

Animals↗

Characterization of 5-fluorouracil microspheres for colonic delivery.

The purpose of this investigation was to prepare and evaluate the colon-specific microspheres of 5-fluorouracil for the treatment of colon cancer. Core microspheres of alginate were prepared by the modified emulsification method in liquid paraffin and by cross-linking with calcium chloride. The core microspheres were coated with Eudragit S-100 by the solvent evaporation technique to prevent drug release in the stomach and small intestine. The microspheres were characterized by shape, size, surface morphology, size distribution, incorporation efficiency, and in vitro drug release studies. The outer surfaces of the core and coated microspheres, which were spherical in shape, were rough and smooth, respectively. The size of the core microspheres ranged from 22 to 55 microm, and the size of the coated microspheres ranged from 103 to 185 microm. The core microspheres sustained the drug release for 10 hours. The release studies of coated microspheres were performed in a pH progression medium mimicking the conditions of the gastrointestinal tract. Release was sustained for up to 20 hours in formulations with core microspheres to a Eudragit S-100 coat ratio of 1:7, and there were no changes in the size, shape, drug content, differential scanning calorimetry thermogram, and in vitro drug release after storage at 40 degrees C/75% relative humidity for 6 months.

Antineoplastic Agents↗

Delivery of an anticancer drug and a chemosensitizer to murine breast sarcoma by intratumoral injection of sulfopropyl dextran microspheres.

Intratumoral injection of controlled-release microsphere formulations of anticancer compounds has the potential to selectively increase tumour exposure to drugs. This work aimed to evaluate the therapeutic effect and toxicity of microsphere formulations containing the anticancer drug, doxorubicin, in a murine tumour model. The effect of co-administration of verapamil, a P-glycoprotein modulator or chemosensitizer, was investigated. Initial in-vitro studies confirmed the ability of verapamil to enhance the accumulation of both doxorubicin and [(99mTc)]sestamibi, also a P-glycoprotein substrate, in EMT6 murine breast sarcoma cells and a doxorubicin-selected multidrug-resistant variant, EMT6/AR1.0. Ex-vivo studies using confocal microscopy demonstrated release of doxorubicin from microspheres and diffusion of the drug through tissue. For in-vivo studies, EMT6 and EMT6/AR1.0 cells were grown in BALB/c mice. Following intratumoral injection of doxorubicin-loaded microspheres, alone or in combination with verapamil-loaded microspheres, the tumour diameter was measured serially as an indication of therapeutic effect, while the weight, appearance, and behaviour of the mice were monitored as an indication of general toxicity. Intratumoral injections of doxorubicin-loaded microspheres were tolerated much better than systemic administration of equivalent drug concentrations. There was a modest (up to 34%) delay of tumour growth compared with groups receiving no treatment or blank microspheres. Co-injection of verapamil microspheres with doxorubicin microspheres produced a moderate increase in toxicity but no further delay in tumour growth. Controlled-release microsphere formulations of anticancer agents administered intratumorally were an efficient way to deliver high drug doses to the tumour with little systemic toxicity.

Animals↗

Biodegradable PLGA microspheres as a sustained release system for a new luteinizing hormone-releasing hormone (LHRH) antagonist.

A sustained release poly(DL-lactide-co-glycolide) (PLGA) microsphere delivery system to treat prostate cancer for a luteinizing hormone-releasing hormone (LHRH) antagonists, LXT-101 was prepared and evaluated in the paper. LXT-101 microspheres were prepared from PLGA by three methods: (1) double-emulsion solvent extraction/evaporation technique, (2) single-emulsion solvent extraction/evaporation technique, and (3) S/O/O (solid-in-oil-in-oil) method. The microspheres were investigated on drug loading, particle size, surface morphology and in vitro release profiles. An accelerated release approach was also established in order to expedite the evaluation periods. The in vivo evaluation of the microspheres was made by monitoring testosterone levels after subcutaneous administration to rats. The LXT-101 PLGA microspheres showed smooth and round surfaces according to a scanning electron microscopic investigation, and average particle size of ca. 30 mum according to laser diffractometry. The drug encapsulation efficiency of microspheres was influenced by LA/GA ratio of PLGA, salt concentrations, solvent mixture and preparation methods. Moreover, LA/GA ratio of PLGA, different preparation methods and different peptide stabilizers affected in vitro release of drugs. In vivo study, the testosterone levels were suppressed to castration up to 42 d as for the 7.5 mg/kg dose. And in vivo performance of LXT-101 microspheres was dose-dependent. The weights of rat sexual organs decreased and histopathological appearance of testes had little changes after 4-month microspheres therapy. This also testified that LXT-101 sustained release microspheres could exert the efficacy to suppress the testosterone level to castration with little toxicity. In conclusion, the PLGA microspheres could be a well sustained release system for LXT-101.

Animals↗

Chemical, dissolution stability and microscopic evaluation of suspensions of ibuprofen and sustained release ibuprofen-wax microspheres.

Chemical stability studies of suspensions of ibuprofen powder and ibuprofen-wax microspheres were performed using an accelerated stability protocol with a modified high performance liquid chromatography (HPLC) procedure. The variables considered were pH, suspending agents and temperature. The study showed little or no chemical degradation in the different suspending agents after storage for three months. Dissolution stability was examined in suspensions of ibuprofen microspheres made from an optimized formulation with 17% drug loading. The storage temperature were 23, 37 and 45 degrees C. Other variables for the dissolution stability studies were suspending agents, wax types, suspending medium pH and microsphere size. Suspensions of ceresine wax microspheres stored at 37 degrees C showed faster drug release than room temperature storage, but suspensions stored at 45 degrees C showed an opposite effect. Microspheres suspended in syrup and stored at 37 degrees C had faster dissolution rates than microspheres suspended in methylcellulose at the same temperature, possibly as a result of an interaction between the syrup and the microsphere constituents. Suspensions of microcrystalline wax microspheres had better dissolution stability than microspheres made from ceresine wax. Higher suspending medium pH resulted in faster release of drug from the suspended microspheres, but particle size did not significantly affect the dissolution stability.

Anti-Inflammatory Agents, Non-Steroidal↗