Search PubMed⌕ Search

SEARCH · Search PubMed

Results for “EMULSIONS”

Search indexed PubMed citations on genomics, clinical trials, systematic reviews and public health. Explore titles, authors and supplied subject terms, then open the PubMed record.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 289 records · Page 16Linked to original sources
PubMed1989

Effects of a novel perfluorochemical emulsion on lymphoid tissues and immunocompetence in rats: time course effects relative to immunological challenge.

1. The effects of intravenous (i.v.) injection of low doses of a novel perfluorochemical (PFC) emulsion on lymphoid tissues and antibody production against i.v.-injected sheep red blood cells (SRBC) have been studied relative to the timing of immunization in rats. 2. Spleen and, to a lesser extent, liver weights were significantly increased in response to injection of emulsion but no consistent pattern was observed. 3. Thymus weight was consistently decreased following injection of emulsion; in contrast, mesenteric lymph node (MLN) weights were unchanged throughout except for a significant increase in animals injected with emulsion 24 hr prior to immunization. 4. The mean plasma antibody titre to SRBC showed a variable response in animals receiving the emulsion: titres were significantly increased in rats injected with emulsion 1 hr prior to immunization whereas they were significantly reduced in animals injected with emulsion 7 days before SRBC. 5. These results show that lymphoid tissue weights and plasma antibody titres to SRBC vary according to the time of a previous or subsequent injection of PFC emulsion.

Animals↗
PubMed2005

Improved gene expression pattern using Epstein-Barr virus (EBV)-based plasmid and cationic emulsion.

To improve transgene expression of a non-viral gene delivery system, an Epstein-Barr virus (EBV)-based plasmid and cationic emulsion complex was prepared and evaluated. Cationic emulsion was formulated with castor oil, 3-N-(N',N'-dimethylaminoethane)-carbamoyl cholesterol (DC-Chol) and other co-emulsifiers. An EBV-based plasmid containing the two EBV components, origin of replication (oriP) and EBV nuclear antigen 1 (EBNA-1), was constructed. The physical characteristics of the emulsion and the emulsion/DNA complex were determined. After cells were transfected with cationic emulsion/EBV-based plasmid complex, transfection efficiency and expression pattern were evaluated using green fluorescent protein (GFP) as a reporter. The average particle size and zeta potential of the emulsion itself were 96 nm and + 17 mV, respectively. The emulsion showed stable size distribution up to at least one month. With an increase of emulsion to DNA ratio, zeta-potential increased from negative to positive and the particle size decreased to 200-300 nm. The complex was stable against DNase I digestion and showed comparable transfection efficiency with Lipofectin for several tested cell lines. An enhanced and prolonged gene expression was achieved using EBV-based plasmid and cationic emulsion complex. Combining physically stable emulsion with self-replicating EBV-based plasmid may confer more effective gene expression.

Carcinoma, Hepatocellular↗
PubMed2004

Rheological properties of highly concentrated protein-stabilized emulsions.

We prepared concentrated quasi monodisperse hexadecane-in-water emulsions stabilized by various proteins and investigated their rheological properties. Some protein-stabilized emulsions possess remarkably high elasticity and at the same time they are considerably fragile--they exhibit coalescence at yield strain and practically do not flow. The elastic storage modulus G' and the loss modulus G" of the emulsions were determined for different oil volume fractions above the random close packing. Surprisingly, the dimensionless elastic moduli G'/(sigma/a), sigma being the interfacial tension, and a being the mean drop radius, obtained for emulsions stabilized by different proteins do not collapse on a single master curve. They are almost always substantially higher than the corresponding values obtained for equivalent Sodium Dodecyl Sulfate (SDS)-stabilized emulsions. The unusually high elasticity cannot be attributed to a specificity of the continuous phase, because the osmotic equation of state of our emulsions is found identical to the one obtained for samples stabilized by classical surfactants. In parallel, we mimicked the thin films that separate the droplets in the concentrated emulsion and found that the protein adsorption layers contain a substantial number of sticky surface aggregates. These severely obstruct local rearrangements of individual drops in respect to their neighbors which leads to coalescence at yield strain. Furthermore, we found that G'/(sigma/a) is correlated (for a given oil volume fraction) to the dilatational elastic modulus, of the protein layer adsorbed on the droplets. The intrinsic elasticity of the protein layers, together with the blocked local rearrangements are considered as the main factors determining the unusual bulk elasticity of the studied emulsions.

Animals↗
PubMed2004

W/O/W multiple emulsions with diclofenac sodium.

The disperse oil droplets of W/O/W multiple emulsions contain small water droplets, in which drugs could be incorporated, but the structure of these emulsions is also the reason for possible instability. Due to the middle oil phase which acts as a 'semipermeable' membrane the passage of water across the oil phase can take place. However, the emulsions have been produced in a two-step-production process so not only the leakage of encapsulated drug molecules out of the inner water phase during storage but also a production-induced reduction of the encapsulation rate should be considered. The aim of this study was to ascertain how far the production-induced reduction of the encapsulation rate relates to the size of inner water droplets and to evaluate the relevance of multiple emulsions as drug carrier for diclofenac sodium. Therefore multiple emulsions were produced according to a central composite design. During the second production step it was observed that the parameters pressure and temperature have an influence on the size of the oil droplets in the W/O/W multiple emulsions. Further experiments with different W/O emulsions resulted in W/O/W multiple emulsions with different encapsulation rates of diclofenac sodium, due to the different sizes of the inner water droplets, which were obtained in the first production step.

Diclofenac↗
PubMed2004

The evaluation of cosmetic and pharmaceutical emulsions aging process using classical techniques and a new method: FTIR.

The purpose of this paper is to show how the utilization of Fourier Transform Infrared (FTIR) spectroscopy can be interesting in stability studying of cosmetic or pharmaceutical "oil in water" (O/W) emulsions. In this study temperature storage tests were performed to accelerate the aging process and evaluate the stability of five emulsions. Emulsions were analyzed by FTIR and classical methods (conductivity, viscosity, pH, texture analysis) in order to determine a method that would enable predicting the emulsion's stability. During the aging process, modifications of chemical functions are measured by FTIR (using spectrometric indices), such modifications included: a decrease of unsaturation index, an increase of carbonyl index and a broadening of the carbonyl band. This band was deconvoluted to evaluate the contribution of different species in the broadening phenomenon, which seems to be caused by the appearance of free fatty acids. Conductimetry seems to be the most sensitive technique to assess physical modifications during emulsion's aging. Concerning the most unstable emulsions, a progressive increasing of conductivity was observed several months before the emulsion destabilizes. Consequently, FTIR and conductimetry are two complementary techniques. Conductimetry is a useful technique to predict emulsion destabilization while FTIR allows the measurement of chemical modifications and helps to understand the chemical mechanisms which occur during the oxidation.

Cosmetics↗
PubMed2005

Formulation of an ophthalmic lipid emulsion containing an anti-inflammatory steroidal drug, difluprednate.

Preparation of oil-in-water (o/w) type lipid emulsion is one of the approaches to formulate drugs that are poorly water-soluble but can be dissolved in the oil phase of the emulsions. A synthetic glucocorticoid medicine, difluprednate (DFBA), is a water-insoluble compound. We formulated DFBA (0.05%, w/v) ophthalmic lipid emulsion containing 5.0% (w/v) caster oil and 4.0% (w/v) polysorbate 80. The appearance of the emulsion was blue and translucent lipid emulsion, and the median particle size of the lipid emulsion was 104.4 nm. Neither separation nor change in particle size was observed after 6 months at 40 degrees C. Furthermore, when compared with DFBA (0.05%, w/v) ophthalmic suspension, the lipid emulsion showed 5.7-fold higher concentration of DFB that was an active metabolite of DFBA in aqueous humor at 1h after instillation. Ophthalmic lipid emulsion enhances the intraocular penetration of drugs, and it is useful as a delivery system for the ophthalmic preparations of lipophilic drugs.

Absorption↗
PubMed2005

Influence of environmental stresses on stability of oil-in-water emulsions containing droplets stabilized by beta-lactoglobulin-iota-carrageenan membranes.

An oil-in-water emulsion (5 wt% corn oil, 0.5 wt% beta-lactoglobulin (beta-Lg), 0.1 wt% iota-carrageenan, 5 mM phosphate buffer, pH 6.0) containing anionic droplets stabilized by interfacial membranes comprising of beta-lactoglobulin and iota-carrageenan was produced using a two-stage process. A primary emulsion containing anionic beta-Lg coated droplets was prepared by homogenizing oil and emulsifier solution together using a high-pressure valve homogenizer. A secondary emulsion containing beta-Lg-iota-carrageenan coated droplets was formed by mixing the primary emulsion with an aqueous iota-carrageenan solution. The stability of primary and secondary emulsions to sodium chloride (0-500 mM), calcium chloride (0-12 mM), and thermal processing (30-90 degrees C) were analyzed using zeta-potential, particle size and creaming stability measurements. The secondary emulsion had better stability to droplet aggregation than the primary emulsion at NaCl </=500 mM, CaCl(2) </= 2 mM, and holding temperatures </= 60 degrees C for 20 min. The interfacial engineering technology used in the study could therefore lead to the creation of food emulsions with improved stability to environmental stresses.

Calcium Chloride↗
PubMed2005

Formation and stability of polychlorinated biphenyl Pickering emulsions.

An emulsion stabilized by colloidal suspensions of finely divided solids is known as a Pickering emulsion. The potential for polychlorinated biphenyls (PCBs) to form Pickering emulsions ex situ when in contact with powdered solids, such as clays and metal oxides, is investigated here. Bentonite, iron oxide and magnesium oxide dispersions proved to be robust Pickering emulsion stabilizers, whereas manganese oxide dispersions were not. Batch experiments revealed that emulsions can be formed using a moderately low energy input and can be stabilized with solid concentrations as low as 0.5 wt.%. For the base conditions (volumetric oil fraction (phi(oil))=30 vol.%; solid concentration (chi)=2 wt.%), the formed emulsions were indefinitely stable and the initial average droplet diameters varied from 80 to 258 mum, depending on the solid used in the colloidal dispersion. The average droplet size varied at early time, but for most conditions stabilized to a steady-state value 1 week after preparation. The effect of Ostwald ripening was limited. At greater than 0.5 wt.% concentration, the efficiency of the solid dispersion as a stabilizer was dependant on the volumetric oil fraction but not on the solid concentration. Generally, systems with volumetric oil fractions outside of the 20-70 vol.% range were unstable. The emulsions' droplet stability, average droplet size and size distribution were observed to vary as a function of the amount of energy provided to the system, the volumetric oil fraction, and the concentration of the solid in the aqueous dispersion. It is hypothesized that drilling through fractured rock in the immediate vicinity of dense, non-aqueous phase liquid (DNAPL) PCBs may provide both the energy and solid material necessary to form Pickering emulsions.

Bentonite↗
PubMed2006

Enhanced reductive dechlorination in columns treated with edible oil emulsion.

The effect of edible oil emulsion treatment on enhanced reductive dechlorination was evaluated in a 14 month laboratory column study. Experimental treatments included: (1) emulsified soybean oil and dilute HCl to inhibit biological activity; (2) emulsified oil only; (3) emulsified oil and anaerobic digester sludge; and (4) continuously feeding soluble substrate. A single application of emulsified oil was effective in generating strongly reducing, anaerobic conditions for over 14 months. PCE was rapidly reduced to cis-DCE in all three live columns. Bioaugmentation with a halorespiring enrichment culture resulted in complete dechlorination of PCE to ethene in the soluble substrate column (yeast extract and lactate). However, an additional treatment with a pulse of yeast extract and bioaugmentation culture was required to stimulate complete dechlorination in the emulsion treated columns. Once the dechlorinating population was established, the emulsion only column degraded PCE from 90-120 microM to below detection with concurrent ethene production in a 33 day contact time. The lower biodegradation rates in the emulsion treated columns compared to the soluble substrate column suggest that emulsified oil barriers may require a somewhat longer contact time for effective treatment. In the HCl inhibited column, partitioning of PCE to the retained oil substantially delayed PCE breakthrough. However, reduction of PCE to more soluble degradation products (cis-DCE, VC and ethene) greatly reduced the impact of oil-water partitioning in live columns. There was only a small decline in the hydraulic conductivity (K) of column #1 (low pH+emulsion, K(final)/K(initial)=0.57) and column #2 (live+emulsion, K(final)/K(initial)=0.73) indicating emulsion injection did not result in appreciable clogging of the clayey sand. However, K loss was greater in column #3 (sludge+emulsion, K(final)/K(initial)=0.12) and column #4 (soluble substrate, K(final)/K(initial)=0.03) indicating clogging due to biomass and/or gas production can be significant.

Carbon↗
PubMed2004

Hydrolysis of the oil phase of a W/O/W emulsion by pancreatic lipase.

W/O/W emulsions are expected to protect bioactive substances from degradation by pancreatic enzymes. We investigated the enzymatic hydrolysis of the oil phase and release of a marker substance from the inner-aqueous phase to the outer-aqueous phase using an artificial digestive fluid. Octanoic acid triacylglycerol (C8TG) was used as the oil phase. W/O/W emulsions were prepared by two-step homogenization and succeeding membrane filtration. When the artificial digestive fluid containing lipase and gall was added to the emulsion, release of the marker substance from the inner-phase solution, oil-phase hydrolysis, and emulsion coalescence occurred in that order. When a coarse emulsion and 0.2- and 0.8-microm membrane-filtered fine emulsions were treated with the fluid for 1 h, the degrees of C8TG hydrolysis were 3.8%, 55% and 57%, the fractions of the marker substance released from the inner-water phase were 2.7%, 89% and 72%, and the median diameters of the oil droplets were changed from 32 to 23 microm, 0.71 to 27 microm, and from 2.2 to 26 microm, respectively. These results suggested that the diameter of the oil droplets in the W/O/W emulsion significantly affected the release profile of the marker loaded in the inner-water phase of the emulsion.

Animals↗
PubMed2001

Formulation of shear rate sensitive multiple emulsions.

This work mainly concentrates on the formulation of W/O/W multiple emulsions capable of breaking and releasing their inner aqueous phase under shear rates compatible with agroalimentary, pharmaceutical and cosmetic applications. Three kinds of multiple emulsions were studied: one with a high concentration of primary emulsion, not viscosified in the external aqueous phase; multiple emulsions gelified with a synthetic polymer (Carbopol 974P((R))); and other multiple emulsions thickened with chemically modified cellulose (hydroxypropylcellulose). The results of this study show the influence of the composition of the external aqueous phase of the emulsions on their fragmentation and release as a function of the shear rate. Despite these differences of behavior with respect to the shear rate, each emulsion fits to Taylor's theoretical framework, indicating that the bursting mechanisms of the globules under shear are the same whatever the composition of the multiple emulsions.

Chemistry, Pharmaceutical↗
PubMed2003

Optimization of a thermally reversible W/O/W multiple emulsion for shear-induced drug release.

PURPOSE: The present work aimed at improvement of the formulation of a previously developed thermo-reversible W/O/W multiple emulsion by increasing the emulsion stability and reaching a higher fraction of an encapsulated drug released under shear. The emulsion was based on high molecular weight graft-copolymers of poly(acrylic acid) and Pluronic F127 as stabilizing agents. METHODS: Once a stable W/O/W thermo-reversible multiple emulsion was obtained via a fine-tuning of the formulation, rheological, granulometric and conductometric tests were performed to assess the thermo-reversible behavior and the fragmentation-release characteristics of the new W/O/W multiple emulsion. RESULTS: The emulsion exhibited a 10(3) fold increase in viscosity over a range of temperatures from 20 to 40 degrees C. At moderate shearing, a complete release of the marker encapsulated in the internal aqueous phase was observed (99.6%) at 35 degrees C, whereas only 30% was released at 20 degrees C. Under similar conditions at 35 degrees C, slightly more than 50% was released for the initial formula. CONCLUSION: Additionally, the ease of fabrication of the thermo-reversible W/O/W multiple emulsion combined with the complete release under shear at body temperature and the superior emulsion stability suggest numerous applications in the controlled release of drugs.

Chemistry, Pharmaceutical↗
PubMed2000

Preparation and evaluation of w/o/w type emulsions containing vancomycin.

The objective of this contribution is to summarize the preparation and application of water-in-oil-in-water type multiple emulsions (w/o/w emulsions) entrapping vancomycin (VCM). Formulations of the emulsions (the composition of an oily phase or the type and concentrations of surfactants) and emulsification methods (a stirring method and a membrane method) or conditions (rotation rates, pore sizes of membrane or operation pressures) were evaluated in order to prepare stable w/o/w emulsions. The pharmaceutical properties of the w/o/w emulsions - particle sizes, viscosity, phase separation and drug entrapment efficiency were measured and evaluated. We prepared stable w/o/w emulsions with a particle size of about 3 micrometer and an entrapment efficiency of VCM of about 70%. When this emulsion was administered intravenously to rats, plasma concentrations of VCM were prolonged compared to the VCM solution alone. The results of this study show the potential of the w/o/w emulsions for several clinical applications as one of the drug delivery systems.

Animals↗
PubMed2000

The dose-related hypoglycemic effects of insulin emulsions incorporating highly purified EPA and DHA.

The dose-related pharmacological effects of insulin emulsion incorporating highly purified eicosapentaenoic acid (EPA) and docosahexaenoic acid (DHA) were investigated. Water-in-oil-in-water multiple emulsions (insulin dose, 0, 10, 25 and 50 IU/kg) incorporating 2% DHA or EPA were administered directly into the colonic and rectal loops in situ. Serum insulin levels rose and serum glucose levels decreased in an insulin dose-related fashion. The relationship of insulin dose and C(max) or AUC(insulin) was linear at the rectum, but a non-linear relationship was observed at the colon. The trend was more predominant in DHA. In the in vivo rectal absorption experiment using emulsions incorporating 2% DHA, 5 IU/kg of insulin emulsion produced a rapid, transitory increase in serum insulin levels and strong reduction of serum glucose levels. The pharmacological availability determined from the dose-response curve by s.c. administration of insulin reached 43.2+/-26.3% (mean+/-S.D.). Mucosal irritation caused by administration of emulsions incorporating 2% EPA or DHA was evaluated by a lactate dehydrogenase (LDH) release study, and compared with those of the emulsion incorporating 2% oleic or linolenic acid. Only when emulsion incorporating 2% oleic acid was applied in the intestine did significant LDH release into the mesenteric veins occur. Our results indicate that emulsion incorporating highly purified long-chain polyunsaturated fatty acid, especially DHA, has the potential of becoming the formulation for enteral delivery of insulin.

Animals↗
PubMed2002

Reverse water-in-fluorocarbon emulsions for use in pressurized metered-dose inhalers containing hydrofluoroalkane propellants.

Pulmonary administration of drugs has demonstrated numerous advantages in the treatment of pulmonary diseases due to direct targeting to the respiratory tract. It enables avoiding the first pass effect, reduces the amount of drugs administered, targets drugs to specific sites and reduces their side effects. Reverse water-in-fluorocarbon (FC) emulsions are potential drug delivery systems for pulmonary administration using pressurized metered-dose inhalers (pMDI). The external phase of these emulsions consists of perfluorooctyl bromide (PFOB, perflubron), whereas their internal phase contains the drugs solubilized or dispersed in water. These emulsions are stabilized by a perfluoroalkylated dimorpholinophosphate (F8H11DMP), i.e. a fluorinated surfactant. This study demonstrates the possibility of delivering a reverse fluorocarbon emulsion via the pulmonary route using a CFC-free pMDI. Two hydrofluoroalkanes (HFAs) (Solkane(R) 134a and Solkane(R) 227) were used as propellants, and various solution (or emulsion)/propellant ratios (1/3, 1/2, 2/3, 1/1, 3/2, 3/1 v/v) were investigated. The insolubility of water (with or without the fluorinated surfactant F8H11DMP) in both HFA 227 and HFA 134a was demonstrated. PFOB and the reverse emulsion were totally soluble or dispersible in all proportions in both propellants. This study demonstrated also that the reverse FC emulsion can be successfully used to deliver caffeine in a homogeneous and reproducible way. The mean diameter of the emulsion water droplets in the pressured canister was investigated immediately after packaging and after 1 week of storage at room temperature. Best results were obtained with emulsion/propellant ratios comprised between 2/3 and 3/2, and with HFA 227 as propellant.

Aerosol Propellants↗
PubMed1997

Dissolution of thrombotic arterial occlusion by high intensity, low frequency ultrasound and dodecafluoropentane emulsion: an in vitro and in vivo study.

OBJECTIVES: We examined the effectiveness of the microbubbles of an echo contrast agent, dodecafluoropentane (DDFP) emulsion, to enhance low frequency ultrasound clot disruption in vitro and in vivo. BACKGROUND: Ultrasound is reported to facilitate clot dissolution, and microbubbles could theoretically enhance ultrasound clot dissolution by augmenting cavitational effects. METHODS IN VITRO STUDIES: The disruption rate of fresh human clots by ultrasound (24 kHz, 2.9 W/cm2) was examined in saline and DDFP emulsion. In vivo studies: Using a rabbit iliofemoral thrombotic occlusion model, recanalization rate and histopathologic findings were compared among groups treated with DDFP emulsion alone, transcutaneous ultrasound (20 kHz, 1.5 W/cm2) alone and with DDFP emulsion and ultrasound combined. RESULTS: The ultrasound clot disruption rate was significantly (p < 0.01) increased, from 72 +/- 18% (mean +/- SD) in saline to 98 +/- 4% in DDFP emulsion in 3 min in vitro. No vessel was recanalized by DDFP emulsion alone (0%), and only a single artery was patent after ultrasound treatment alone (9%). In contrast, 82% of iliofemoral arteries were angiographically recanalized after ultrasound treatment with DDFP emulsion. Histologically, the patent arteries had only minimal focal mural thrombus, with no evidence of vessel wall damage. However, substantial damage was observed in rabbit dermis and subcutaneous tissue. CONCLUSIONS: 1) DDFP emulsion, an echo contrast agent, significantly enhances the clot-disrupting effect of low frequency ultrasound in vitro and in an in vivo rabbit iliofemoral occlusion model. 2) This simple combination therapy has potential for clinical application in patients with thrombotic arterial occlusions.

Animals↗
PubMed2003

Peroxidation potential of lipid emulsions after compounding in all-in-one solutions.

OBJECTIVES: We investigated the peroxidation potential of fat emulsions in all-in-one solutions (AIOs). METHODS: Three 20% emulsions were compared: soybean oil (SO; 60% polyunsaturated fatty acids [PUFAs], alpha-tocopherol:PUFAs = 0.44), soybean plus medium-chain triacylglycerol (SO-MCT; 31% PUFAs, alpha-tocopherol:PUFAs = 0.35), and olive oil (OO; 21% PUFAs, alpha-tocopherol:PUFAs = 1.42). For each emulsion, six AIO solutions were prepared by adding 250 mL of emulsion to a lipid-free solution. Lipid peroxide (LPX) and malondialdehyde (MDA) concentrations were evaluated in fat emulsions, lipid-free solutions, and AIOs immediately (T0) and 24 h (T24) after lipid addition. Statistical analysis was done with analysis of variance. RESULTS: Fat emulsion LPX in SO-MCT was lower than that in SO (P = 0.015) and OO (P = 0.024); LPX in SO was greater than that in OO (P = 0.013); MDA in SO was greater than that in SO-MCT (P = 0.001) and OO (P = 0.013); and MDA in SO-MCT was greater than that in OO (P = 0.001). In comparison with MDA at AIO-T0, MDA at AIO-T24 increased in SO (P = 0.005) and SO-MCT (P < 0.001) and decreased in OO (P = 0.003); at AIO-T24, LPX was greater in SO, but not significantly. CONCLUSIONS: In AIO bags, LPX occurred within 24 h after the addition of the lipid emulsion and seemed to be directly related to the PUFA content and inversely related to the alpha-tocopherol:PUFA ratio of the emulsion.

Antioxidants↗
PubMed2002

Physicochemical screening of antimicrobial agents as potential preservatives for submicron emulsions.

Antimicrobial agents should be added to lecithin-stabilized submicron emulsions when these preparations are non-sterile products or when packed in multidose containers. Eleven antimicrobials were introduced to a standard submicron emulsion. The emulsions were adjusted to pH 5.0 or 8.2 prior aseptic filtration or thermal sterilization, respectively. The physicochemical stability of the preparations was observed during storage for 2 years at room temperature. Parabens showed the best compatibility but satisfying stability was also observed in emulsions containing phenylethanol, m-cresol and benzalkonium chloride. Partitioning studies revealed poor correlation between aqueous solubility and content of the preservatives in the aqueous phase of the emulsion. Only 1.2% of the total content of benzalkonium chloride was found in this phase and incorporation of this compound into different microscopic structures of the emulsion is proposed as a reason for such effect. Preliminary studies on the efficacy of antimicrobial preservation was performed for emulsions containing parabens, benzalkonium chloride or chlorocresol and the negative results bring conclusion that higher concentration of antimicrobials or their combination may be required for efficient preservation of submicron emulsions.

Anti-Bacterial Agents↗