Search PubMed⌕ Search

SEARCH · Search PubMed

Results for “BUTADIENE”

Search indexed PubMed citations on genomics, clinical trials, systematic reviews and public health. Explore titles, authors and supplied subject terms, then open the PubMed record.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 289 records · Page 16Linked to original sources
PubMed2006

Intrinsic information content of NMR dipolar couplings: a conformational investigation of 1,3-butadiene in a nematic phase.

The conformational equilibrium of 1,3-butadiene in a condensed fluid phase is investigated by liquid-crystal NMR spectroscopy. The full set of D(HH) and D(CH) dipolar couplings is determined from the analysis of the (1)H spectra of the three 1,3-butadiene most-abundant isotopomers (i.e. the all (12)C and the two single-labeled (13)C isotopomers) for a total of 21 independent dipolar couplings. A very good starting set of spectral parameters for the analysis of the (1)H spectrum is determined in a semiautomated way by the analysis of the (N-1) (specifically, N=6, the number of 1/2 spin nuclei in the spin system) quantum refocused (5QR), and not (5Q), spectra. As an alternative approach, a Monte Carlo (MC) numerical simulation, capable of predicting the solute ordering, is tested to simulate the 5QR spectrum. The set of D(ij) couplings is very good, proving that the MC method can represent a novel, valid alternative to the existing spectral simplification procedures. The experimentally determined dipolar-coupling data set is fully compatible with the 1,3-butadiene conformational distribution reported in the literature for isolated molecules, indicating the presence of about 99 % of s-trans conformer. With regards to the remaining 1 %, in spite of the direct and very strong dependence of the observables on the molecular structure, it was not possible to discriminate between the planar s-cis and s-gauche forms, both of which produce a very good fit of the dipolar couplings. Vibrational corrections, up to the anharmonic term, were applied; the calculated geometrical parameters are in good- although not exact-agreement with those reported in the literature from experimental and theoretical investigations. This result can be considered as supporting the methodology used for obtaining the structure and conformational distribution of a flexible molecule in a liquid phase.

Journal Article↗
PubMed2005

Acute exposure of human lung cells to 1,3-butadiene diepoxide results in G1 and G2 cell cycle arrest.

1,3-Butadiene (BD) causes genetic damage, including adduct formation, sister chomatid exchange, and point mutations. Previous studies have focused on the types of genetic damage and tumors found after long-term exposure of rodents to butadiene. This study examined the effect of the most active BD metabolite, butadiene diepoxide (BDO2), on cell cycle entry and progression in human lung fibroblasts (LU cells) with a normal diploid karyotype. Serum-arrested (G0) LU cells were exposed to BDO2 for 1 hr and stimulated to divide with medium containing 10% fetal bovine serum. The BDO2-treated LU cells were evaluated for cell cycle progression, nuclear localization of arrest mediators, mitotic index, and cellular proliferation. The BDO2-treated cells demonstrated a substantial inhibition of cell proliferation when treated with 100 microM BDO2 for 1 hr. No appreciable levels of apoptosis or mitotic figures were observed in the BDO2-treated cells through 96 hr posttreatment. Flow cytometric analysis revealed that the lack of proliferation in BDO2-treated LU cells was related to G1 arrest in about half of the cells and a delayed progression through S and G2 arrest in nearly all of the remaining cells. Both G1 and G2 arrest were prolonged and only a very small percentage of BDO2-treated cells were eventually able to replicate. Increased nuclear localization of both p53 and p21(cip1) was observed in BDO2-treated cells, suggesting that the cell cycle arrest was p21(cip1)-mediated. These results demonstrate that BDO2 induces cell cycle perturbation and arrest even with short-term exposure that does not produce other pathologic cellular effects.

Cell Cycle↗
PubMed1986

Sister chromatid exchange and chromosome aberration analyses in mice after in vivo exposure to acrylonitrile, styrene, or butadiene monoxide.

The use of polymers in plastic and rubber products has generated concern that monomers potentially active in biological systems may be eluted from these substances. We have evaluated two such monomers, acrylonitrile and styrene, for the induction of chromosome damage in mice. Butadiene monoxide, a presumed metabolite of a third important monomer, 1,3-butadiene, was also tested. These chemicals were administered as a single intraperitoneal injection; sister chromatid exchanges and chromosome aberrations were analyzed in bone marrow cells. Acrylonitrile and styrene were largely negative for these endpoints when tested at doses ranging to 60 mg/kg and 1,000 mg/kg, respectively. Butadiene monoxide, which previously has not been tested in a mammalian system, was determined to be a very effective inducer of sister chromatid exchanges and chromosome aberrations. Both endpoints showed a clear dose response and a greater than ten-fold increase over control levels at high doses. These studies represent an initial step in our efforts to evaluate genetic risk associated with exposure to common polymeric chemicals.

Acrylonitrile↗
PubMed2004

An isotopic dilution approach for 1,3-butadiene tailpipe emissions and ambient air monitoring.

An isotopic dilution approach for 1,3-butadiene analysis in gaseous samples is presented. The methodology is based on active sampling on sorbent tubes and subsequent analysis by thermal desorption into a gas chromatography/mass spectrometry system. By adding a perdeuterated internal standard onto the sorbent tubes before sampling, and using mass spectrometric detection, the methodology gives high accuracy for this unstable analyte. The method has been used to monitor 1,3-butadiene ambient air concentrations in a residential area in proximity to a heavy-traffic roadway over a one-week period, for comparison with other traffic-related pollutants analysed by standard procedures. It has also been used to determine tailpipe emissions of two vehicles by standard emission testing procedures in a dynamometer. These vehicles were chosen as examples of low- and high-end emission rate vehicles, i.e., an old no-catalytic converter Otto engine and a new direct-injection diesel engine with catalytic converter. Exhaust gas emissions were 0.052 and 35.85 mg/km, reflecting differences in fuel, engine design, age, and presence (or not) of a catalytic abatement system. The ambient air results showed a weekly average concentration of 1,3-butadiene of 0.53 microg/m(3).

Journal Article↗
PubMed1996

Species difference in the ovarian toxicity of 1,3-butadiene epoxides in B6C3F1 mice and Sprague-Dawley rats.

1,3-Butadiene (BD) is an ovarian carcinogen in mice, but not in rats. Since species variation in metabolism of BD has been associated with the greater sensitivity of mice to BD-induced carcinogenicity, the extent of biotransformation and detoxification of BD and its epoxides may play a critical role in other ovotoxic effects of this compound. Thus, the ovotoxic potency of the BD epoxides was determined. Butadiene monoepoxide (BMO, 0.005-1.43 mmol/kg b.w.), butadiene diepoxide (BDE, 0.002-0.29 mmol/kg b.w.), or vehicle was administered i.p. to female B6C3F1 mice and Sprague-Dawley rats for 30 days. Following day 30, tissues were removed and weighed, and the number of pre-antral ovarian follicles counted. BMO was ovotoxic in mice as demonstrated by decreases in reproductive organ weights (1.43 mmol/kg b.w.) and follicular counts, but not in rats at any dose tested. In mice the ED50 values for BMO for small and growing follicles were 0.29 and 0.40 mmol/kg b.w., respectively. BDE was ovotoxic in both species, however mice were more sensitive to BDE than rats. Ovarian and uterine weights were decreased in mice at 0.14 and 0.29 mmol/kg b.w. of BDE treatment, and in rats at 0.29 mmol/kg b.w. only. The ED50 values for BDE in mice were 0.10 and 0.14 mmol/kg b.w. for small and growing follicles, respectively, ED50 values could not be determined in rats since only 32% of the follicular population was depleted at the highest concentration tested. Thus, BMO and BDE exhibited a greater ovotoxic potential in mice, as compared to rats. In addition, in each species the diepoxide was the most potent ovotoxicant.

Animals↗
PubMed1997

Disposition of butadiene epoxides in Sprague-Dawley rats.

1,2-Epoxybutene (BMO) and diepoxybutane (BDE) are metabolic products of 1,3-butadiene in rodents. Both BMO and BDE are suspect in the development of tumors in rats and mice. To understand the distribution and elimination of these compounds in the absence of the rate-limiting production from butadiene, the pharmacokinetics of BMO and BDE in blood were determined in adult male Sprague-Dawley rats following intravenous administration. All animals were dually cannulated in these studies. For the BMO studies, rats were dosed with 71, 143, or 286 mumol/kg BMO (n = 3 for each dose group). For the BDE studies, rats were dosed with 523 mumol/kg BDE (n = 3). All animals tolerated the BMO and BDE doses without grossly observable adverse effects. Blood was drawn at predetermined time points and extracted in methylene chloride. BDE and BMO concentrations were quantitated by gas chromatography or gas chromatography/mass spectrometry. The BMO distribution half-lives were short and ranged from 1.4 min at the lowest dose to 1.8 min at the highest dose. Volume of distribution at steady state ranged from 0.53 +/- 0.17 to 0.59 +/- 0.31 l/kg. Systemic clearances ranged from 67 +/- 17 to 114 +/- 20 ml/min per kg. The terminal elimination half-lives were also short and ranged from 5.7 to 8.5 min among the doses. The pharmacokinetic parameters after an i.v. dose of 523 mumol/kg BDE were a distribution half-life of 2.7 min, terminal elimination T1/2 of 14 min, volume of distribution at steady state of 0.73 +/- 0.06 l/kg, and systemic clearance of 76 +/- 8 ml/min per kg. These pharmacokinetic parameters demonstrate the similarity between disposition of the two epoxides in rats, that include a rapid distribution after i.v. administration into a small extravascular body compartment as well as a rapid elimination from blood. These pharmacokinetic data provide useful blood clearance information for assessing the critical physiological and biochemical determinants underlying the disposition of butadiene epoxides.

Animals↗
PubMed2003

Diradical mechanisms for the cycloaddition reactions of 1,3-butadiene, benzene, thiophene, ethylene, and acetylene on a Si(111)-7x7 surface.

The cycloaddition chemistry of several representative unsaturated hydrocarbons (1,3-butadiene, benzene, ethylene, and acetylene) and a heterocyclic aromatic (thiophene) on a Si(111)-7x7 surface has been explored by means of density functional cluster model calculations. It is shown that (i) 1,3-butadiene, benzene, and thiophene can undergo both [4+2]-like and [2+2]-like cycloadditions onto a rest atom-adatom pair, with the former process being favored over the latter both thermodynamically and kinetically; (ii) ethylene and acetylene undergo [2+2] cycloaddition-like chemisorptions onto a rest atom-adatom pair; and (iii) all of these reactions adopt diradical mechanisms. This is in contrast to the [4+2] cycloaddition-like chemisorptions of conjugated dienes on a Si(100) surface and to the prototype [4+2] cycloadditions in organic chemistry, which were believed to adopt concerted reaction pathways. Of particular interest is the [4+2]-like cycloaddition of s-trans-1,3-butadiene, whose stereochemistry is retained during its chemisorption on the Si(111) surface.

Journal Article↗
PubMed2004

[Ni0]-catalyzed Co-oligomerization of 1,3-butadiene and ethylene: a theoretical mechanistic investigation of competing routes for generation of linear and cyclic C10-olefins.

A detailed theoretical investigation of the mechanism for the [Ni(0)]-catalyzed co-oligomerization of 1,3-butadiene and ethylene to afford linear and cyclic C(10)-olefins is presented. Crucial elementary processes have been carefully explored for a tentative catalytic cycle, employing a gradient-corrected density functional theory (DFT) method. The favorable route for oxidative coupling starts from the prevalent [Ni(0)(eta(2)-butadiene)(2)(ethylene)] form of the active catalyst through oxidative coupling between the two eta(2)-butadienes. The initial eta(3),eta(1)(C(1))-octadienediyl-Ni(II) product is the active precursor for ethylene insertion, which preferably takes place into the syn-eta(3)-allyl-Ni(II) bond of the prevalent eta(3)-syn,eta(1)(C(1)),Delta-cis isomer. The insertion is driven by a strong thermodynamic force, giving rise entirely to eta(3),eta(1),Delta-trans-decatrienyl-Ni(II) forms, with the eta(3)-anti,eta(1),Delta-trans isomer almost exclusively generated. Occurrence of allyl,eta(1),Delta-cis isomers, however, is precluded on both kinetic and thermodynamic grounds, thereby rationalizing the observation that cis-DT and cis,cis-CDD are never formed. Linear and cyclic C(10)-olefins are generated in a highly stereoselective fashion, with trans-DT and cis,trans-CDD as the only isomers, along competing routes of stepwise transition-metal-assisted H-transfer (DT) and reductive CC elimination under ring closure (CDD), respectively, that start from the prevalent eta(3)-anti,eta(1),Delta-trans-decatrienyl-Ni(II) species. The role of allylic conversion in the octadienediyl-Ni(II) and decatrienyl-Ni(II) complexes has been analyzed. As a result of the detailed exploration of all important elementary steps, a theoretically verified, refined catalytic cycle is proposed and the regulation of the selectivity for formation of linear and cyclic C(10)-olefins is elucidated.

Journal Article↗
PubMed1997

1-Aryl-F-1,3-butadienes and Unsymmetrical alpha,omega-Diaryl-F-polyenes.

Para-substituted 1-aryl-F-1,3-butadiene derivatives p-R-C(6)H(4)-CF=CFCF=CF(2) (2a-g), where R = H, CH(3), OCH(3), OC(6)H(11), N(CH(3))(2), Br, and CF(3), have been prepared by reaction of appropriate arylmagnesium bromides with F-1,3-butadiene. (19)F NMR chemical shifts correlate with sigma(p) Hammett substituent constants. Compounds 2a-e react on their terminal perfluorovinyl group with C-nucleophiles and were used as intermediates in subsequent reactions with suitable organolithium compounds for the synthesis of a new series of unsymmetrically substituted alpha,omega-diaryl-F-polyenes RC(6)H(4)(CF=CF)(n)()C(6)H(4)R', where n = 2 or 3 and R' is one of the substituents specified above. A variety of new synthons containing alpha,omega-diaryl-F-1,3-butadiene skeleton and reactive Br, OH, CH=O, and COOH functionalities in para-positions on aromatic rings has been also prepared. Structural aspects, NMR spectra, and mesogenic properties of the title compounds are discussed.

Journal Article↗
PubMed1997

A Density Functional Theory Study of Secondary Orbital Overlap in Endo Cycloaddition Reactions. An Example of a Diels-Alder Reaction between Butadiene and Cyclopropene.

Density functional theory (B3LYP, BLYP) and ab initio (HF, MP2, and QCISD(T)) methods support the hypothesis that transition state structures for the addition of cyclopropene to butadiene is stabilized through interactions between the hydrogen of cyclopropene and the pi-bond of butadiene. This finding is supported by the computions of bond orders and charge separations and by the differences in frontier orbital energies. Because the interactions between the hydrogen of cyclopropene and the pi-bond of butadiene is possible only in an endo transition state structure, it is conceivable that the formation of an endo cycloadduct should be dominant. This is confirmed by the computation of a lower activation barrier, approximately 2.0 kcal/mol, for the endo transition state structure than for the exo transition state structure.

Journal Article↗
PubMed2005

Acetylene coupling on Cu(111): formation of butadiene, benzene, and cyclooctatetraene.

Acetylene trimerizes to benzene on the (111) face of copper, as it does on the (100) and (110) planes. However, Cu(111) also yields butadiene and cyclooctatetraene, the latter never previously found with Cu or any other material. No coverage threshold is observed for the onset of these coupling reactions, implying high adsorbate mobility: gaseous benzene is formed by a surface reaction rate-limited process, whereas butadiene and cyclooctatetraene are formed by desorption rate-limited processes. H/D isotope tracing shows that benzene formation proceeds via a statistically random associative mechanism, whereas butadiene formation is associated with strong kinetic isotope effects, probably associated with C-H cleavage. A pericyclic mechanism involving dimerization of C4H4 metallocycles is proposed to account for the formation of cyclooctatetraene. We also found that approximately 45 nm alpha-alumina supported copper particles operated under catalytic conditions at atmospheric pressure yield the same principal reaction products as those found with Cu(111) under vacuum conditions. It therefore seems likely that the elementary reaction steps that describe the surface chemistry of the model system are also important under practical conditions. Comparison of the structure, bonding, and reactivity of acetylene on Cu(111) and Pd(111) indicates that the effectiveness of copper in promoting C-H cleavage in adsorbed acetylene is associated with greater rehybridization of the C-C bond with concomitant weakening of the C-H bond.

Journal Article↗
PubMed2006

s-trans-1,3-butadiene and isotopomers: vibrational spectra, scaled quantum-chemical force fields, fermi resonances, and C-H bond properties.

Quadratic quantum-chemical force fields have been determined for s-trans-1,3-butadiene using B3LYP and MP2 methods. Basis sets included 6-311++G, cc-pVTZ, and aug-cc-pVTZ. Scaling of the force fields was based on frequency data for up to 11 isotopomers, some of these data being original. A total of 18 scale factors were employed, with, in addition, an alteration to one off-diagonal force constant in the A(u) species. MP2 calculations without f functions in the basis perform badly in respect of out-of-plane bending mode frequencies. Centrifugal distortion constants and harmonic contributions to vibration-rotation constants (alphas) have been calculated. Existing experimental frequency data for all isotopomers are scrutinized, and a number of reassignments and diagnoses of Fermi resonance made, particularly in the nu(CH) region. The three types of CH bond in butadiene were characterized in terms of bond length and isolated CH stretching frequency, the latter reflecting data in the nu(CD) region. Broad agreement was achieved with earlier results from local mode studies. Differences in CH bond properties resemble similar differences in propene. A simplified sample setup for recording FT-Raman spectra of gases was applied to four isotopomers of butadiene.

Journal Article↗
PubMed2005

Trifluoromethyl groups in crystal design of 1,4-diphenyl-1,3-butadienes for topochemical [2 + 2] photodimerization.

[structure: see text] UV irradiation of the powdered crystalline sample of each of three (E,E)-1,4-di(trifluoromethyl-substituted)phenyl-1,3-butadienes (1-3) was found to yield a single [2 + 2] cycloaddition product in the solid state. Moreover, upon irradiation, the crystalline samples of two (E,E)-1,4-di(trifluoromethyl- and fluorine-substituted)phenyl-1,3-butadienes (4, 5) undergo a similar conversion to afford a [2 + 2] cycloaddition product, respectively. Our observations suggest that trifluoromethyl groups can be used to direct 1,4-diphenyl-1,3-butadiene molecules to form a parallel, offset-stacked orientation suitable for topochemical [2 + 2] cycloaddition.

Journal Article↗
PubMed2001

Synthesis and characterization of nucleosides and oligonucleotides bearing adducts of butadiene epoxides on adenine n(6) and guanine n(2).

Butadiene is a major industrial chemical whose genotoxic effects are attributed to the reaction of its oxidized metabolites, butadiene monoepoxide (BDO) and butadiene diepoxide (BDO2), with DNA. Nucleosides and oligonucleotides containing regio- and stereochemically specific adducts of BDO and the BDO2-related compound, butene 3,4-diol 1,2-epoxide (BDE), on guanine [(2R)- and (2S)-N(2)-(1-hydroxy-3-buten-2-yl) and (2R,3R)- and (2S,3S)-N(2)-(2,3,4-trihydroxybut-1-yl), respectively] and on adenine [(2R)- and (2S)-N(6)-(1-hydroxy-3-buten-2-yl) and (2R,3R)- and (2S,3S)-N(6)-(2,3,4-trihydroxybut-1-yl), respectively] have been prepared by nonbiomimetic routes. For guanine adducts, 2-fluoro-O(6)-(trimethylsilylethyl)-2'-deoxyinosine was treated with (2R)- and (2S)-2-amino-3-buten-1-ol to give the BDO adducts and with (2R,3R)- and (2S,3S)-1-amino-2,3,4-butanetriol to produce the BDE adducts; the adducted oligonucleotides were prepared from 11-mer oligonucleotides containing the halopurine. Adenine adducts were prepared in a similar fashion using 6-chloropurine 2'-deoxyriboside as the reactive purine component.

Adenine↗
PubMed2004

Structure of a site specific major groove (2S,3S)-N6-(2,3,4-trihydroxybutyl)-2'-deoxyadenosyl DNA adduct of butadiene diol epoxide.

The solution structure of the (2S,3S)-N(6)-(2,3,4-trihydroxybutyl)-2'-deoxyadenosyl adduct arising from the alkylation of adenine N(6) at position X(6) in d(CGGACXAGAAG).d(CTTCTTGTCCG), by butadiene diol epoxide, was determined. This oligodeoxynucleotide contains codon 61 (underlined) of the human N-ras protooncogene. This oligodeoxynucleotide, containing the adenine N(6) adduct butadiene triol (BDT) adduct at the second position of codon 61, was named the ras61 S,S-BDT-(61,2) adduct. NMR spectroscopy revealed modest structural perturbations localized to the site of adduction at X(6).T(17), and its nearest-neighbor base pairs C(5).G(18) and A(7).T(16). All sequential NOE connectivities arising from DNA protons were observed. Torsion angle analysis from COSY data suggested that the deoxyribose sugar at X(6) remained in the C2'-endo conformation. Molecular dynamics calculations using a simulated annealing protocol restrained by a total of 442 NOE-derived distances and J coupling-derived torsion angles refined structures in which the BDT moiety oriented in the major groove. Relaxation matrix analysis suggested hydrogen bonding between the hydroxyl group located at the beta-carbon of the BDT moiety and the T(17) O(4) of the modified base pair X(6).T(17). The minimal perturbation of DNA induced by this major groove adduct correlated with its facile bypass by three Escherichia coli DNA polymerases in vitro and its weak mutagenicity [Carmical, J. R., Nechev, L. V., Harris, C. M., Harris, T. M., and Lloyd, R. S. (2000) Environ. Mol. Mutagen. 35, 48-56]. Overall, the structure of this adduct is consistent with an emerging pattern in which major groove adenine N(6) alkylation products of styrene and butadiene oxides that do not strongly perturb DNA structure are not strongly mutagenic.

Alkylation↗
PubMed2004

[Rh(I)L]-catalyzed cyclotetramerization of 1,3-butadiene: a theoretical investigation of alternative mechanistic paths for the generation of the [Rh(III)(octadienediyl)(PR3)]+ complex.

A detailed theoretical investigation of alternative mechanistic paths for the formation of the [Rh(III)(octadienediyl)(PiPr3)]+ complex is presented, employing a gradient-corrected density functional theory (DFT) method (BP86). This process represents most likely the first step in the recently reported [Rh(I)L]-catalyzed cyclotetramerization of butadiene (M. Bosch, M. S. Brookhart, K. Ilg and H. Werner, Angew. Chem., Int. Ed., 2000, 39, 2304). The favorable route for oxidative addition under C-C-bond formation starts from the prevalent [Rh(I)(butadiene)2(PiPr3)]+ form of the active catalyst through oxidative coupling between two cis-eta4-butadienes. This affords the [Rh(III)(bis-eta3-anti-octadienediyl)(PiPr3)]+ compound as the kinetic coupling product that consecutively undergoes transformation into the thermodynamically favorable bis-eta3-syn-octadienediyl-Rh(III) isomer via facile allylic conversions occurring in the octadienediyl framework. The computationally predicted energy profile is almost in quantitative agreement with the experimentally determined kinetics and allows a consistent rationalization of the experimental observations.

Journal Article↗
PubMed1996

32P-postlabelling of diastereomeric 7-alkylguanine adducts of butadiene monoepoxide.

The reaction of 3,4-epoxy-1-butene (BMO) with deoxyguanosine-3'-monophosphate (3'-dGMP) resulted in the formation of two pairs of diastereomeric 7-alkyl-3'-dGMP derivatives corresponding to two isomers C¿-1 and C¿-2. The T4 polynucleotide kinase-mediated phosphorylation with [gamma-32P]-ATP showed preferential labelling of diastereo- mers of the C¿-1 isomer. The diastereomers 1 and 2 of the C¿-1 isomer had labelling efficiencies of 42%. However, the labelling efficiencies of diastereomers 3 and 4 of the C¿-2 isomer were 11 and 10%, respectively. The 32P-postlabelling of BMO-modified DNA yielded four isomers in the ratio of 4:4:1:1 with overall recoveries being 14%. The two isomers had a half-life of 270 min (C¿-1 isomer) and 300 min (C¿-2 isomer) which is in accordance with the stability predicted by other similar adduct experiments. The molecular modelling experiments showed more pronounced restricted rotation of butadiene residue in C¿-2 isomers due to steric interaction between butadiene residue at N-7 and O(6) atom of guanine than in C¿-1 isomer. The butadiene residue also leads to steric overcrowding at 3'-phosphate in C¿-2 isomer which probably restricts the access to the active site of T4 polynucleotide kinase.

Animals↗
PubMed1999

In vitro reactions of butadiene monoxide with single- and double-stranded DNA: characterization and quantitation of several purine and pyrimidine adducts.

We have previously shown that butadiene monoxide (BM), the primary metabolite of 1,3-butadiene, reacted with nucleosides to form alkylation products that exhibited different rates of formation and different stabilities under in vitro physiological conditions. In the present study, BM was reacted with single-stranded (ss) and double-stranded (ds) calf thymus DNA and the alkylation products were characterized after enzymatic hydrolysis of the DNA. The primary products were regioisomeric N-7-guanine adducts. N-3-(2-hydroxy-3-buten-1-yl)adenine and N-3-(1-hydroxy-3-buten-2-yl)adenine, which were depurinated from the DNA more rapidly than the N-7-guanine adducts, were also formed. In addition, N6-(2-hydroxy-3-buten-1-yl)deoxyadenosine and N6-(1-hydroxy-3-buten-2-yl)deoxyadenosine were detected and evidence was obtained that these adducts were formed by Dimroth rearrangement of the corresponding N-1-deoxyadenosine adducts, not while in the DNA, but following the release of the N-1-alkylated nucleosides by enzymatic hydrolysis. N-3-(2-hydroxy-3-buten-1-yl)deoxyuridine adducts, which were apparently formed subsequent to deamination reactions of the corresponding deoxycytidine adducts, were also detected and were stable in the DNA. Adduct formation was linearly dependent upon BM concentration (10-1000 mM), with adduct ratios being similar at the various BM concentrations. At a high BM concentration (750 mM), the adducts were formed in a linear fashion for up to 8 h in both ssDNA and dsDNA. However, the rates of formation of the N-3-deoxyuridine and N6-deoxyadenosine adducts increased 10- to 20-fold in ssDNA versus dsDNA, whereas the N-7-guanine adducts increased only slightly, presumably due to differences in hydrogen bonding in ssDNA versus dsDNA. These results may contribute to a better understanding of the molecular mechanisms of mutagenesis and carcinogenesis of both BM and its parent compound, 1,3-butadiene.

Adenine↗