Search PubMed⌕ Search

SEARCH · Search PubMed

Results for “light quality”

Search indexed PubMed citations on genomics, clinical trials, systematic reviews and public health. Explore titles, authors and supplied subject terms, then open the PubMed record.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 271 records · Page 15Linked to original sources

The effects of light intensity and spectral quality on growth and shoot initiation in tobacco callus.

The effects of eight different narrow band-emitting fluorescent lamps (371-750 nm) and four commercial broad band-emitting fluorescent sources upon growth and shoot initiation in tobacco callus (Nicotiana tabacum var. Wisconsin 38) have been characterized. Wavelength and intensity are equally important parameters in determining morphogenic changes. Near ultraviolet light (371 nm) was found to stimulate (0.024 mw/cm(2)) or inhibit (above 0.15 mw/cm(2)) callus growth and shoot initiation, depending on the light intensity. Stimulation of growth and shoot production occurs also in blue light region, but at higher intensity than in the near ultraviolet. Red and far red light (up to 1.7 mw/cm(2)) do not appear to affect callus growth or stimulate shoot initiation. The enhancement of callus growth and the stimulation of shoot initiation are controlled by the same near ultraviolet-absorbing photoreceptor system present in a small enough concentration that it cannot be recognized in the absorption spectrum of the intact tissue. Carotenoids, porphyrins, and phytochrome associated with the high irradiance response do not appear to qualify as the photoreceptor. Flavonoids are possible candidates. Radiation emitted by fluorescent lamps outside the near visible region was determined, and we concluded that energy levels were not sufficient to affect the reported results. The spectral output of several commercial lamps in the visible and near visible regions is such that there could be different effects on growth and development of tissue cultures.

Journal Article↗

A zinc finger protein RHL41 mediates the light acclimatization response in Arabidopsis.

Arabidopsis thaliana plants showed an increased tolerance to high-intensity light when pre-exposed to medium-intensity light. This response, known as light acclimatization, depended on the quantity of light, the period of irradiation, and the quality of light. Among characterized acclimatization-induced cDNA clones, we identified a zinc finger protein rhl41 (responsive to high light) gene, that was rapidly up-regulated in proportion to the time of irradiation and the light intensity. Transgenic Arabidopsis plants over-expressing the rhl41 gene showed an increased tolerance to high-intensity light, and also morphological changes of thicker and dark green leaves. Interestingly, the palisade parenchyma was highly developed in the leaves of the transgenic plants, which is one of the long-term acclimatization responses in Arabidopsis plants. The anthocyanin content (a light protectant) as well as the chlorophyll content also increased. Antisense transgenic plants exhibited decreased tolerance to high irradiation. We propose that the RHL41 zinc finger protein has a key role in the acclimatization response to changes in light intensity.

Acclimatization↗

Air bubble-induced light-scattering effect on image quality in 193 nm immersion lithography.

As an emerging technique, water immersion lithography, offers the capability of reducing critical dimensions by increasing the numerical aperture that is due to the higher refractive indices of immersion liquids than that of air. However, in the process of forming a water fluid layer between the resist and the lens surfaces, air bubbles are often created because of the high surface tension of water. The presence of air bubbles in the immersion layer will degrade the image quality because of the inhomogeneity-induced light scattering in the optical path. Analysis by geometrical optics indicates that the total reflection of light causes the enhancement of scattering in the region in which the scattering angle is less than the critical scattering angle, which is 92 deg at 193 nm. Based on Mie theory, numerical evaluation of scattering that is due to air bubbles, polystyrene spheres, and poly(methyl methacrylate) spheres was conducted for TE, TM, or unpolarized incident light. Comparison of the scattering patterns shows that the polystyrene spheres and air bubbles resemble each other with respect to scattering properties. In this paper, polystyrene spheres are used to mimic air bubbles in studies of lithographic imaging of bubbles in immersion water. In an interferometric lithography system, the distance beyond which bubbles will not print can be estimated by direct counting of defect sites.

Journal Article↗

Evaluation of light sources and light guides for use in transurethral surgery.

An evaluation of the quality of light sources and guides was carried out in response to a demand that sufficient light intensity should always be available for transurethral procedures when bleeding occurs. A light monitor was developed for the rapid assessment of the source intensity and light guide transmission. A simple test protocol was also developed for routine assessment of the sources and guides and for evaluation of new sources and guides before purchase. The sources and guides were classified in order of merit and coded to permit the selection of those of the highest quality; this guarantees a satisfactory level of illumination during surgery.

Electronics, Medical↗

Design and fabrication of adjustable red-green-blue LED light arrays for plant research.

BACKGROUND: Although specific light attributes, such as color and fluence rate, influence plant growth and development, researchers generally cannot control the fine spectral conditions of artificial plant-growth environments. Plant growth chambers are typically outfitted with fluorescent and/or incandescent fixtures that provide a general spectrum that is accommodating to the human eye and not necessarily supportive to plant development. Many studies over the last several decades, primarily in Arabidopsis thaliana, have clearly shown that variation in light quantity, quality and photoperiod can be manipulated to affect growth and control developmental transitions. Light emitting diodes (LEDs) has been used for decades to test plant responses to narrow-bandwidth light. LEDs are particularly well suited for plant growth chambers, as they have an extraordinary life (about 100,000 hours), require little maintenance, and use negligible energy. These factors render LED-based light strategies particularly appropriate for space-biology as well as terrestrial applications. However, there is a need for a versatile and inexpensive LED array platform where individual wavebands can be specifically tuned to produce a series of light combinations consisting of various quantities and qualities of individual wavelengths. Two plans are presented in this report. RESULTS: In this technical report we describe the practical construction of tunable red-green-blue LED arrays to support research in plant growth and development. Two light fixture designs and corresponding circuitry are presented. The first is well suited for a laboratory environment for use in a finite area with small plants, such as Arabidopsis. The second is expandable and appropriate for growth chambers. The application of these arrays to early plant developmental studies has been validated with assays of hypocotyl growth inhibition/promotion and phototropic curvature in Arabidopsis seedlings. CONCLUSION: The presentation of these proven plans for LED array construction allows the teacher, researcher or electronics aficionado a means to inexpensively build efficient, adjustable lighting modules for plant research. These simple and effective designs permit the construction of useful tools by programs short on electronics expertise. These arrays represent a means to modulate precise quality and quantity in experimental settings to test the effect of specific light combinations in regulating plant growth, development and plant-product yield.

Arabidopsis↗

Light and the transcriptional response of the microcystin biosynthesis gene cluster.

Microcystin, a hepatotoxin known to be the cause of animal and human deaths, is produced by the bloom-forming cyanobacterium Microcystis aeruginosa in freshwater bodies worldwide. The toxin is produced nonribosomally via a multifunctional enzyme complex, consisting of both peptide synthetase and polyketide synthase modules coded for by the mcy gene cluster. The recent identification of the mcy genes in the production of microcystin synthetase for the first time provides an avenue to study the regulation of microcystin production at a genetic level. In this study, M. aeruginosa PCC7806 was grown either under continuous light of various intensities or under low light with subsequent short-term exposure to different light intensities and qualities and various stress factors. RNase protection assays were employed to observe the level of mcyB and mcyD transcription under each condition. Both mcyB and mcyD transcript levels were increased under high light intensities and red light. Blue light and certain artificial stress factors (methylviologen and NaCl) led to reduced transcript amounts. There appeared to be two light thresholds, between dark and low light (16 micromol of photons m(-2) s(-1)), and medium (31 micromol of photons m(-2) s(-1)) and high light (68 micromol of photons m(-2) s(-1)), at which a significant increase in transcription occurred. Our findings show that the effect of light on microcystin synthetase production is due to light quality and is initiated at certain threshold intensities, which are not necessarily reflected by observed intracellular toxin bioactivity.

Cyanobacteria↗

How do cyanobacteria sense and respond to light?

Cyanobacteria exhibit numerous responses to changes in the intensity and spectral quality of light. What sensors do cyanobacteria use to detect light and what are the mechanisms of signal transduction? The publication in 1996 of the complete genome sequence of the cyanobacterium Synechocystis 6803 provided a tremendous stimulus for research in this field, and many light-sensors and signal transducers have now been identified. However, our knowledge of cyanobacterial light-signal transduction remains fragmentary. This review summarizes what we know about the ways in which cyanobacteria perceive light, some of the ways which they respond to light signals and some recent achievements in elucidating the signal transduction mechanisms. Some problems in characterizing cyanobacterial signal transduction pathways are outlined and alternative experimental strategies are discussed.

Cyanobacteria↗

In vivo and in vitro characterization of the light-regulated cpcB2A2 promoter of Fremyella diplosiphon.

When exposed to different spectral qualities of light, many cyanobacteria dramatically alter their phycobilisome rod composition in a process termed complementary chromatic adaptation. In the cyanobacterium Fremyella diplosiphon, this response is associated with differential expression of the cpcB2A2, cpeBA, and cpeCDE operons, which code for the phycobiliproteins phycocyanin and phycoerythrin and the phycoerythrin linker polypeptides, respectively. To define components of the signal transduction pathway involved in light-regulated expression of genes encoding phycobilisome polypeptides, we have used in vivo and in vitro techniques to identify cis-acting sequences and trans-acting factors necessary for the regulation of the red-light-inducible cpcB2A2 operon. Deletion of the cpcB2A2 upstream sequences to -76 bp with respect to the transcription start site had no effect on red-light induction of a cpcB2A2-beta-glucuronidase (GUS) chimeric gene, while deletion to -37 bp abolished GUS expression. Furthermore, a fragment of the cpcB2A2 gene from -76 to +25 bp linked to the untranslated leader of cpcB1A1 (a constitutively expressed operon encoding phycocyanin) is sufficient to drive high-level GUS expression in red light. Therefore, the sequence between positions -76 and -37 is necessary for the expression of cpcB2A2, and the region extending from -76 to +25 is sufficient for red-light induction of the operon. Attempts were made to correlate the in vivo data with protein binding in the region upstream of the transcription start site of cpcB2A2. Using in vitro analysis, we detected two protein-binding sites in the cpcB2A2 promoter which were localized to positions -162 to -122 and -37 to +25. Proteins from both red- and green-light-grown cells interacted with the former site, while only proteins present in extracts from red-light-grown cells interacted with the latter site. The data from both the in vivo and in vitro analyses suggest that while two regions upstream of the cpcB2A2 transcription initiation site specifically bind proteins, only the binding site bordering the transcription start site is important for complementary chromatic adaptation.

Amino Acid Sequence↗

Reconsidering the psychometrics of quality of life assessment in light of response shift and appraisal.

The increasing evidence for response shift phenomena in quality of life (QOL) assessment points to the necessity to reconsider both the measurement model and the application of psychometric analyses. The proposed psychometric model posits that the QOL true score is always contingent upon parameters of the appraisal process. This new model calls into question existing methods for establishing the reliability and validity of QOL assessment tools and suggests several new approaches for describing the psychometric properties of these scales. Recommendations for integrating the assessment of appraisal into QOL research and clinical practice are discussed.

Adaptation, Psychological↗

Time, a quality-control parameter in flow cytometry.

Time has been used as a quality-control parameter in our flow cytometer. This parameter was automatically incorporated into the list-mode data base by hooking the computer clock directly into the acquisition logic. Quality control can then be checked by "replaying" fluorescence or light scatter data vs. time and any instrumental drift can be observed and degraded data can be excised. The technique is illustrated with a number of DNA data sets from a tissue culture cell line in which artificial perturbations were introduced during data acquisition to simulate potential causes of instrumental drift.

Cell Line↗

Application of the new Australian standard for clinical lighting.

A new Australian Standard "AS 1765-1975 Artificial Lighting for Clinical Observation" has recently been published. This specifies the quality of light necessary to accurately assess a patient's colour. The physical principles and terminology used in modern lighting are discussed, and the experimental work on which the new Standard is based is outlined. The only readily available fluorescent tubes which conform to the Standard are the imported Philips "TL40W/37" and the more efficient locally made "White Deluxe" tubes.

Australia↗

The influence of different wavelengths of light on human biological rhythms.

The purpose of this review was to discuss the influence of light on humans in the environment, focusing the relation between the quality of light and human biological rhythms, and also to apply the results on lighting planning to a living space which takes into account human health and comfort. The main discussions were as follows: 1) The effects of light on the behavior of core temperature and melatonin vary depending on its wavelength. Light with long wavelengths, such as light with a low color temperature and red light, had little influence on the human biological rhythms. On the other hand, green and blue light--light of mid-short wavelength such as light with a high color temperature--had a greater influence. 2) From the relation between the stimulus received by each photoreceptor and the inhibition of core temperature and melatonin, it might be concluded that the photoreceptor responsible for transmitting light information that affects biological rhythms is M-cones. 3) A higher light intensity was required in the morning than in the evening to induce the inhibition of melatonin secretion. This result suggests the possibility of existence of a diurnal change of sensitivity of the photoreceptors (M-cones). 4) From all these results, it is proposed in the field of living environment and living engineering that light with a low color temperature should be used for low-level lighting at night, and high-level light with a high color temperature in the morning.

Circadian Rhythm↗

Interaction of visual and olfactory cues in the aggregation behaviour of the haematophagous bug Triatoma infestans.

We analysed how the assembling behaviour of Triatoma infestans is modulated by the convergence of chemical cues released by their faeces and the spectral quality of the light associated with refuges. Second-instar larvae were confronted with refuges associated with a visual stimulus (either blue, green or red lights having the same intensity, or darkness) and a chemical cue (presence or absence of faeces). In this context, faeces constitute a major attractant for bugs. In the absence of faeces, bugs always assembled in dark places. Green light was always rejected despite the presence of faeces, i.e. the assembling behaviour was controlled by a photonegative reaction to this light. In the presence of red light, orientation towards the chemical cue dominated over the bugs' photonegative reaction to this light. Such a light was avoided in the absence of faeces but not in their presence. Also, negative phototaxis to blue light could be counteracted by the presence of the chemical cue. Thus, a concrete interaction between visual and olfactory cues occurred in these experiments: the bugs' response changed depending on the specific combination of spectral light and faeces. Finally, bugs responded differentially to blue, red and green lights of the same intensity. They assembled preferentially on red, followed by blue and then by green. Thus, discrimination between lights of different spectral quality is possible, probably through an achromatic mechanism.

Animals↗

Light regulation of the Arabidopsis respiratory chain. Multiple discrete photoreceptor responses contribute to induction of type II NAD(P)H dehydrogenase genes.

Controlled oxidation reactions catalyzed by the large, proton-pumping complexes of the respiratory chain generate an electrochemical gradient across the mitochondrial inner membrane that is harnessed for ATP production. However, several alternative respiratory pathways in plants allow the maintenance of substrate oxidation while minimizing the production of ATP. We have investigated the role of light in the regulation of these energy-dissipating pathways by transcriptional profiling of the alternative oxidase, uncoupling protein, and type II NAD(P)H dehydrogenase gene families in etiolated Arabidopsis seedlings. Expression of the nda1 and ndc1 NAD(P)H dehydrogenase genes was rapidly up-regulated by a broad range of light intensities and qualities. For both genes, light induction appears to be a direct transcriptional effect that is independent of carbon status. Mutant analyses demonstrated the involvement of two separate photoreceptor families in nda1 and ndc1 light regulation: the phytochromes (phyA and phyB) and an undetermined blue light photoreceptor. In the case of the nda1 gene, the different photoreceptor systems generate distinct kinetic induction profiles that are integrated in white light response. Primary transcriptional control of light response was localized to a 99-bp region of the nda1 promoter, which contains an I-box flanked by two GT-1 elements, an arrangement prevalent in the promoters of photosynthesis-associated genes. Light induction was specific to nda1 and ndc1. The only other substantial light effect observed was a decrease in aox2 expression. Overall, these results suggest that light directly influences the respiratory electron transport chain via photoreceptor-mediated transcriptional control, likely for supporting photosynthetic metabolism.

Arabidopsis↗

Data, knowledge and method bases in chemical sciences. Part IV. Current status in databases.

Computer readable databases have become an integral part of chemical research right from planning data acquisition to interpretation of the information generated. The databases available today are numerical, spectral and bibliographic. Data representation by different schemes--relational, hierarchical and objects--is demonstrated. Quality index (QI) throws light on the quality of data. The objective, prospects and impact of database activity on expert systems are discussed. The number and size of corporate databases available on international networks crossed manageable number leading to databases about their contents. Subsets of corporate or small databases have been developed by groups of chemists. The features and role of knowledge-based or intelligent databases are described.

Artificial Intelligence↗

[Quality control of intra-oral radiographs].

This paper deals with the different stages in the process of making intra-oral radiographs and the factors which influence their quality: the X-ray equipment, operator technique, and processing and film variables. Common errors at each stage are discussed and suggestions for quality assurance measures are given.

Humans↗

Determination of carbon monoxide concentration and total pressure in gas cavities in the silica glass body of light bulbs by FT-IR spectrometry.

Fourier transform infrared (FT-IR) spectroscopy has been adapted to control the quality of light bulbs made from silica glass. Such light bulbs contain a molybdenum accessory which, if contaminated with carbon, during the melting procedure of bulb fabrication, can cause the production of carbon monoxide. This CO can be trapped in small gas cavities in the silica glass body of the bulb. A method has been developed for the detection of CO and the total pressure within these gas cavities by traditional FT-IR spectrometry using a spectral resolution of 0.5 cm(-1). The concentration of CO was determined by using a classical least-squares (CLS) method, and the accuracy of concentration determination is reported for the case with sample and reference spectra recorded at different pressures. The total pressure in the cavities was established by two different methods: either by CLS fitting of reference spectra to sample spectra or fitting a Voigt line shape function to the spectral lines within the CO fundamental stretching band. In the latter method, the width of the lines was determined and pressure-broadening coefficients are given and compared with high-resolution data from the literature. According to the measurements, 0.55-0.80 atm total pressure and 0.8-4.0% (v/v) CO was determined in the gas cavities. This method can also be applied to determine the total pressure in similar enclosed spaces in which an appropriate indicator gas component exists.

Journal Article↗