Search PubMed⌕ Search

SEARCH · Search PubMed

Results for “Tibia”

Search indexed PubMed citations on genomics, clinical trials, systematic reviews and public health. Explore titles, authors and supplied subject terms, then open the PubMed record.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 271 records · Page 15Linked to original sources
PubMed1994

Bone mineral distribution of the proximal tibia in gonarthrosis assessed in vivo by photon absorption.

Regional bone mineral density (BMD, g/cm2) of the proximal tibia including the subchondral plate was measured in vivo by dual photon absorptiometry (DPA). Twenty-one women and six men with gonarthrosis (GA) were examined. Twenty-four healthy women served as controls for the women. The precision error of the BMD measurements ranged from 1.4-3.7% depending on the region measured. Subchondral BMD correlated significantly to the radiologic stage (P < 0.05). Compared to the controls, BMD of the subchondral plate, BMD of the medial condyle, the medial to lateral distribution ratio of subchondral BMD and the ratio between BMD of the subchondral plate and of the immediately underlying region were significantly increased in patients with predominantly medial GA (P < 0.05-0.0001). The BMD of the lateral condyle was lower in GA patients than in controls (P < 0.05). In patients with unilateral GA, the above-mentioned changes were found in the affected tibia compared to the normal knee in the same individual (P < 0.05). In contrast to any of the patients with varus deformity, the two patients with valgus deformity had higher BMD of the lateral condyle than of the medial. No differences in BMD of the distal forearm or the ultradistal region of the proximal tibia were found between the GA patients and the controls. The study shows that regional bone changes of the proximal tibia in GA can be measured precisely and noninvasively in vivo by DPA.

Absorptiometry, Photon↗
PubMed2003

Comparison of armspan, arm length and tibia length as predictors of actual height of disabled and nondisabled children in Dharavi, Mumbai, India.

OBJECTIVES: To investigate appropriate measurements to predict height in children with physical impairments to facilitate the accurate assessment of nutritional status in field studies. DESIGN: Case-control cross-sectional study. SETTING: Dharavi, a large slum in Mumbai, India. SUBJECTS: In total, 141 children with mixed disabilities and 162 nondisabled control children, aged 2-6 y. METHODS: Height/length, armspan, arm length and tibia length were measured to the nearest 0.1 cm using standard procedures. The relations between armspan, arm length and tibia length with height in controls were investigated using linear regression. RESULTS: Armspan (R(2)=0.93, P<0.001, n=158), arm length (R(2)=0.81, P<0.001, n=162) and tibia length (R(2)=0.72, P<0.001, n=161) were found to be strong predictors of height based on data from nondisabled control children. These measurements could be used to determine a more accurate height for children with physical impairments where the nature of the impairment may interfere with height measurements. CONCLUSIONS: Armspan, arm length and tibia length can be used to determine accurate height for children with physical impairments, for example, children with a nonambulatory status or those with kyphosis or scoliosis of the spine.

Anthropometry↗
PubMed2002

Effect of calcium supplementation on bone dynamics of the maxilla, mandible and proximal tibia in experimental osteoporosis.

The effect of calcium supplementation on the bone dynamics in the hard palate of the molar region (maxilla), mandible and proximal tibia in experimental osteoporotic rats was examined. Ninety ovariectomized (OVX) and 45 sham-OVX Wistar female rats were used in this study. All the rats received surgical operation at 6 weeks of age. Ovariectomized rats were fed on a low calcium diet (0.02%) for 12 weeks post-operation, and then randomly divided into the two following groups. One group was fed on high calcium diet (2.30%) (OVX-HCa) and the other group was remained on the low calcium diet (OVX-LCa). Sham-OVX rats were fed on regular calcium diet (1.15%) during the experimental period (Sham-OVX). Histomorphological analysis was carried out from 12 to 32 weeks post-operation. On undecalcified thin section, bone volume, eroded surface, osteoid surface and bone formation rate were calculated for cortical bone of the maxilla, and for cancellous bone of the mandible and proximal tibia. In the OVX-LCa group, compared with the Sham-OVX group, decrease of the bone volume and increase of the bone resorption and formation parameters were detected throughout the observation periods. In the OVX-HCa group, compared with the OVX-LCa group, increase of the bone volume and temporarily increased parameters of bone formation at 1 week after feeding on high calcium diet were observed in the maxilla, but these changes were not observed in the mandible and proximal tibia. Moreover, the bone resorption and formation parameters in the maxilla, mandible and proximal tibia in the OVX-HCa group became equivalent to the Sham-OVX levels with the passage of time.

Analysis of Variance↗
PubMed2000

Medulloscopy of the tibia: initial report of a new technique.

This study shows the ability of 3 standard endoscopic instruments to access the length of the intramedullary canal through a technique that we have termed "medulloscopy." Cadaveric studies were performed to determine the dimensions of the proximal tibia and the relative abilities of a knee arthroscope, a hip arthroscope, and a flexible rhinolaryngoscope to visualize the length of the intramedullary canal of the tibia. The 3 endoscopes were able to access the length of the intramedullary canal in the following proportions: 19.1% +/- 1.0% for the knee arthroscope, 29.1% +/- 3.8% for the hip arthroscope, and 84.1% +/- 1.8% for the flexible scope (P <.05). The proximal aspect of the intramedullary canal of the tibia can be visualized with standard knee and hip arthroscopic equipment. A flexible rhinolaryngoscope was required to access the distal tibia. Further studies are needed to determine the specific indications for intramedullary arthroscopy.

Aged↗
PubMed2002

The proximal tibia donor site in cleft alveolar bone grafting: experience of 75 consecutive cases.

BACKGROUND: The optimum donor site for cleft alveolar bone grafting is still debated. Donor site morbidity is an important factor in deciding the site for harvest of cancellous bone. Use of the proximal tibia as donor site is associated with few complications. The occurrence of a proximal tibia fracture following cancellous bone harvest from this site, prompted a review of the last 75 consecutive cases carried out at our unit. MATERIAL AND METHOD: The medical notes of 75 consecutive patients undergoing cleft alveolar bone graft were reviewed and postal questionnaires were sent to patient's parents and family physicians. The review focused on donor site morbidity. RESULTS: Fracture of the proximal tibia, a hitherto unreported complication, occurred in two out of 75 cases (2.7%) within our series. Post-operative mobilization was achieved rapidly with normal joint function and donor site healing progressed satisfactorily in all cases. In 1 out of 75 cases the graft was repeated at a later date due to recipient site infection. The incidence of other morbidity was low with most representing local complications only. Length of hospital stay was 3 days (range 2-5 days). CONCLUSION: Based on our findings we feel that the proximal tibia offers a reliable site for harvest of sufficient quantities of good quality cancellous bone. Recommendations are made as to the technique of bone harvest, to minimize the fracture risk.

Adolescent↗
PubMedDate not supplied

[Disruption of the arteria nutricia tibiae by reamed and unreamed intramedullary nailing. Study of the vascular architecture of the human tibial intramedullary cavity].

AIM: By reason of the pseudarthrotic healing of fractures due to vascular complications after reamed and unreamed intramedullary nailing, the intraosseous course and branching of the tibial nutrient artery and its impairment by nailing procedures needs an actual analysis. METHOD: The nutrient vessel of 24 tibiae taken from fresh corpses were prepared by injection of Technovit and lead oxide. After this procedure the medullary cavities of 12 bones were opened by a frontal cut. These specimens were subjected to routine maceration. The other 12 tibiae were naed with the unreamed (6) and the reamed nailing (6) techniques. X-rays were also taken routinely. RESULTS: After penetration of the tibial compact bone the main trunk of the nutrient vessel runs through a perforated osseous tunnel (pars tecta arteriae nutriciae tibiae). At its end the vessel divides into a descending branch (obligate) and two ascending branches (facultative). The descending branch lies near to the centromedial region of the medullary cavity which is termed as the pars liberal arteriae nutriciae tibiae. All branches pass through supporting horizontal osseous lamellas. Due to this topography the reamed nailing technique destroyed the nutrient vessel completely in all specimens. In contrast to this observation the unreamed nailing destroyed the vessel completely only in 1 (16.7%) and partially in 3 (50%) bones; 2 (33.3%) specimens exhibited no destruction of the vessel. CONCLUSION: The unreamed as well as the reamed nailing technique can destroy the intramedullary course of the tibial nutrient artery. Fractures as well as displacement osteotomies or corticotomies are able to diminish the medullary blood supply seriously, if they are localised within the area of the tactic an of the tibial nutrient artery.

Aged↗
PubMed2001

Evaluation of a predictive model for implant surface topography effects on early osseointegration in the rat tibia model.

STATEMENT OF PROBLEM: Alterations in commercially pure titanium (cp Ti) implant surface topography can be made to increase bone formation or the interfacial shear strength of bone at the functioning implant. It is not known whether these 2 goals are congruent or mutually exclusive. PURPOSE: The aim of this study was to determine the effect of implant surface topography parameters of calculated biomechanical significance on the process of bone formation in a rat tibia model of osseointegration. MATERIAL AND METHODS: Implants (cp Ti grade IV) were machined and subsequently treated by grit blasting or grit blasting and 6.4 mol/L HCl. Measurements of surface roughness were made by atomic force microscopic analysis of similarly treated titanium disks. Cleaned and sterilized implants (12 machined, 12 with nonideal pit morphology, 12 with ideal pit morphology) were placed into the tibiae of 400-g male Wistar rats by using a series of drills, irrigation, and a self-tapping procedure. After 3 weeks, tibiae were harvested and processed and embedded in methyl methacrylate resin. Polished sections were examined by backscatter electron microscopy, and the percentage implant surface contacting bone was measured with the Scionics PC image analysis program. RESULTS. The implants possessing a proposed ideal pit morphology supported significantly greater bone formation at the implant surface (54% +/- 7% bone-to-implant contact [P<.003]) than the nonideal pit morphology (40% +/- 15%) or machined surfaces (34% +/- 6%). CONCLUSION: Implant surfaces with a proposed ideal pit morphology (which possess a calculated biomechanical significance) enhanced bone formation at early periods after placement in the rat tibia model.

Animals↗
PubMed2000

Variability in XRF-measured tibia lead levels.

A few studies have examined the variability in 109Cd-based K-shell x-ray fluorescence (KXRF) bone lead measurements from replicate measurements made either at the same time or over a period of time, and one of these studies has shown that the uncertainty in an individual measurement is an underestimate of the standard deviation of replicate measurements. Variability in KXRF tibia lead measurements was assessed from ten cadaver intact legs, from the bare tibiae dissected from nine of these legs, and from four in vivo volunteers. Cadaver legs underwent replicate measurements on multiple occasions. In vivo volunteers underwent single measurements of the left tibia monthly for one year. Average tibia lead levels in the cadaver legs and in vivo volunteers ranged from 6 to 50 and from 6 to 13 microg Pb per g of bone mineral respectively. The factors influencing the standard deviation of replicate measurements were investigated. Both cadaver and in vivo measurements confirmed that the uncertainty in an individual measurement is an underestimate of the standard deviation of replicate measurements, suggesting a methodological deficiency probably shared by most current 109Cd-based K-shell XRF lead measurement systems.

Adult↗
PubMed2003

Bone densitometry as an indicator of percentage tibia ash in broiler chicks fed varying dietary calcium and phosphorus levels.

The relative sensitivity of tibia bone mineral content (BMC) and density (BMD), percentage ash (ash), and shear force as indicators for dietary Ca and P was compared in 3-wk-old broiler chicks. One hundred eight 7-d-old chicks were grouped by weight into 6 blocks of 3 cages each with 6 birds per cage. Three corn-soybean meal-based diets were randomly assigned to cages within each block. The diets were low P, medium P, and adequate P and were formulated to contain 4.0, 5.1, and 7.8 g of total P/kg feed, respectively; and 5.1, 6.7, and 10.0 g of Ca/kg feed, respectively. The chicks were fed the experimental diets for 14 d. On d 22, chicks were killed, and tibiae were removed from 3 birds/cage. Weight gain, feed intake, feed efficiency, BMC, BMD, shear force, and ash were determined. The BMC and BMD were determined using dual energy x-ray absorptiometry. Correlations among the various bone status variables and dietary Ca and P were determined. Growth performance criteria and ash increased linearly, and BMC and BMD increased linearly and quadratically as dietary concentrations of Ca and P increased. The correlation coefficient between dietary Ca and BMC, BMD, shear force, or ash was 0.89, 0.91, 0.50, or 0.89, respectively; and between dietary P and BMC, BMD, shear force, or ash was 0.88, 0.91, 0.48, or 0.89, respectively. The correlation coefficient between ash and BMC, BMD, or shear force was 0.92, 0.93, or 0.67, respectively. The correlation coefficients for linear regression between shear force and BMC or BMD was 0.56. The regression model for predicting percentage ash using BMD was as follows: percentage ash = 24 + (240 x BMD) with an r2 of 86%. It is concluded that in broiler chicks, tibia ash, BMC, and BMD may be more sensitive than shear force as indicators of dietary Ca and P concentrations and that BMD as measured by dual energy x-ray absorptiometry may be used to predict percentage of tibia ash.

Absorptiometry, Photon↗
PubMed1996

Femur lengthening with a vascularized tibia bone flap.

A vascularized tibial bone flap based on a single nutrient vessel has been previously proposed for use in long-bone reconstruction. While the routine use of the tibia for donor bone tissue is precluded by its essential weight-bearing function, in select cases it provides a useful alternative to standard donor bone sources. Cadaver dissection was performed to confirm the endosteal and periosteal vascular anatomy of the tibia. The presence of a consistent nutrient vessel was confirmed. Selective dye injection demonstrated a dual cortical blood supply based on both the endosteal nutrient vessel and multiple periosteal perforator vessels. Inclusion of both vascular supplies maximizes perfusion of bone and periosteum, thus potentially optimizing bone healing and osseous union. Based on these findings, the vascularized tibial bone flap was applied to a clinical case. A 45-year-old male veteran sustained a right proximal femur fracture in a motor vehicle accident. Multiple attempts at fusion with open reduction, internal fixation, grafting, and nonvascularized fibular onlay strut with cerclage wires were all unsuccessful. The patient presented with a chronic right femur nonunion with painful pseudoarthrosis; frozen knee joint; and an internally rotated, 20.3-cm shortened, nonfunctional lower limb. Femur length proximal to the nonunion was less than 15 cm. A maximum amputation stump length is recommended for optimal prosthetic function. A 15-cm pedicled tibial bone flap based on the posterior tibial endosteal and periosteal vascular supply was reversed and plated to the proximal femur to provide a stump of adequate length to optimize prosthetic fitting and function. The tibia is essential for normal weight-bearing, but in select cases may be sacrificed for use in long-bone reconstruction. Expanded use of tibial vascularized allografts in long-bone reconstruction may be made possible following future development of effective and safe immunosuppressive therapy. Transfer based on the posterior tibial pedicle, which includes the endosteal nutrient vessel as well as the periosteal supply via the tibialis posterior muscle, maximizes bone perfusion. The pedicle is of sufficient length to be used for positioning the tibia in the thigh or for free transfer to distant sites.

Amputation Stumps↗
PubMed2004

Biomechanical study of pins in cementing of contained proximal tibia defect.

Defects from curettage for giant cell tumors of bone frequently have been reconstructed with bone cement with or without reinforcement pins. The biomechanical basis for the addition of reinforcement pins was examined using a model of a contained defect in the proximal tibia. Fifty-four cadaveric proximal tibia in matched pairs were divided into five test groups: intact tibia, medial metaphyseal contained defect, defect reconstructed with cement alone, defect reconstructed with cement and pins inserted within the medullary canal, and defect reconstructed with cement and pins inserted through the cortex. Specimens were tested to failure during one cycle of compressive loading. Defect specimens were significantly weaker and less stiff than intact specimens, establishing the validity of the model-contained defects. For the reconstructions, there was no statistically significant difference in load to failure, stiffness, energy to failure, or displacement for the polymethylmethacrylate treatment alone when compared with matched specimen receiving polymethylmethacrylate and pins treatment. Similarly, there was no statistical difference in biomechanical properties in comparing matched specimens treated with polymethylmethacrylate alone or polymethylmethacrylate/pins (cortex). For contained defects of the proximal tibia that are typical after curettage for giant cell tumor, there appears to be no biomechanical advantage to use of reinforcement pins in the cement.

Biomechanical Phenomena↗
PubMed2004

An anteroposterior axis of the tibia for total knee arthroplasty.

The objective of the current study was to identify a new extraarticular anatomic landmark indicating the anteroposterior orientation of the tibia using computed tomography. In 39 volunteers (20 males, 19 females), computed tomography scans for healthy right knees in extension were done perpendicular to the tibial shaft axis. The anteroposterior axis of the tibia was defined as a line perpendicular to the transepicondylar axis and passing through the middle of the posterior cruciate ligament. At the level of the tibial plateau and the patellar tendon attachment, the mean medial percentage width of intersecting point of the patellar tendon and the anteroposterior axis was 10.8% +/- 9.8% (range, -9.3% - +30.0%) and -0.2% +/- 10.4% (range, -23.6% -+23.0%), respectively. The mean angle between the anteroposterior axis and a line connecting the middle of the posterior cruciate ligament to the medial border of the patellar tendon attachment was 0.0 degrees +/- 2.8 degrees (range, -6.3 degrees -+5.2 degrees). The medial border of this attachment therefore can serve as a reliable anterior anatomic landmark to determine the anteroposterior axis of the tibia, and the line connecting the middle of the posterior cruciate ligament and the medial border of the attachment may be useful as a reference axis indicating the anteroposterior orientation of the tibia.

Adult↗
PubMedDate not supplied

Type IV congenital deficiency of the tibia.

Type IV congenital deficiency of the tibia is associated with two major problems: the equinovarus position of the foot with the talus incarcerated in the distal tibiofibular mortise and the limb length inequality due to the shortened dysmorphic tibia. The purpose of this study was to formulate guidelines for the management of this rare but complex condition. Eleven patients treated for type IV congenital deficiency of the tibia between 1963 and 2000 were evaluated. The treatment consisted of a Boyd or Syme amputation of the foot in seven patients, ankle reconstruction surgery in three patients, and heel cord lengthening for correction of the equinovarus deformity of the foot in one patient. Even though seven patients treated by Boyd or Syme amputation were community ambulators with a prosthesis, parents and patients preferred ankle reconstruction. All three patients treated by ankle reconstruction surgery presented with a stable ankle, a plantigrade foot, and independent ambulation. Reconstruction of the ankle mortise should be the treatment of choice for type IV congenital deficiency of the tibia.

Abnormalities, Multiple↗
PubMed1998

Cortical bone blood flow in loose and tight fitting locked unreamed intramedullary nailing: a canine segmental tibia fracture model.

OBJECTIVES: To quantitatively determine the extent to which loose and tight fitting unreamed, locked intramedullary nails devascularize cortical bone and to determine their effect on early strength of union. DESIGN: A 2.5-centimeter segment of devascularized diaphyseal bone was created in the tibiae of twelve skeletally mature mongrel dogs by means of two standardized transverse osteotomies. Stabilization of the tibia was achieved with either a 5.0-millimeter (n = 6) or a 6.5-millimeter (n = 6) unreamed, locked intramedullary nail. Bone blood flow was assessed using laser Doppler flowmetry. Bending stiffness and load to failure were determined for each healed tibia. RESULTS: At the conclusion of the nailing procedure, the overall tibial blood flow was reduced by 58 percent and 72 percent for the 5.0-millimeter and 6.5-millimeter nail groups, respectively (p = 0.001, p = 0.00004). Perfusion was reduced to a greater extent in the tightly fitting nail group (p = 0.017). At eleven weeks postnailing, cortical perfusion increased in both the 5.0-millimeter and the 6.5-millimeter nail groups (p = 0.005, p = 0.002, respectively). Perfusion increased to a higher level in the loosely fitting nail group (p = 0.007). Biomechanical properties of the healed tibiae, including bending stiffness in two planes and load to failure, were similar in the two experimental groups (p = 0.42, p = 0.09, p = 0.34). DISCUSSION: Our results demonstrate that a loose fitting nail spared cortical perfusion at the time of nail insertion more than did a canal filling nail and allowed more complete cortical reperfusion at eleven weeks postnailing. The results of this study have implications for the treatment of severe tibial shaft fractures in which the blood supply is significantly compromised.

Animals↗
PubMedDate not supplied

High pressure pulsatile lavage of contaminated human tibiae: an in vitro study.

OBJECTIVE: This study was designed to examine the effect of high pressure pulsatile lavage (HPPL) on bone destruction and propagation of bacteria in experimentally contaminated human tibiae. METHODS: Using an in vitro model, nine human tibiae from above-knee amputations were tested. A mid-diaphyseal tibial shaft fracture was created, and each end of the fracture was contaminated with bacteria (six tibiae with Staphylococcus aureus, three tibiae with Escherichia coli). The proximal end was designated as the control and the distal end was the test site. The test site was debrided by HPPL (seventy pounds/square inch, 1,200 milliliters/minute, 1,050 cycles/minute) with three liters of normal saline, whereas the control site did not receive any form of irrigation. Serial sections at increasing distance from the fracture site were cultured and the numbers of bacterial colony-forming units (CFUs) were determined at each level. The degree of macroscopic architectural change in each serial section was graded on an ordinal scale. RESULTS: Analysis of culture data revealed a reproducible pattern of bacterial propagation into the intramedullary canal. Peak bacterial seeding occurred at two to three centimeters from the fracture site (p = 0.023, Wilcoxon signed rank test). The degree of bone destruction varied proportionally with the depth into the canal and was found to be predictive of the extent of bacterial propagation determined by culture data. CONCLUSION: In an in vitro model of a contaminated fracture, HPPL resulted in bacterial seeding into the intramedullary canal and significant damage to the architecture of the bone. These observations might have clinical significance.

Bone and Bones↗
PubMed1999

Estimation of defect volume in segmental defects of the tibia and femur.

BACKGROUND: With the advent of modern limb salvage techniques, segmental bone loss in the lower extremity has become more common. METHODS: To aid preoperative planning when dealing with segmental bone loss in the femur and tibia, we performed a cadaveric study to estimate the volume of autogenous or allograft material required to fill defects located in various areas of the bones. RESULTS: The greatest volume was generally required in metaphyseal defects, with an average of 12 cc/cm in the distal femur and proximal tibia, 11 cc/cm in the proximal femur, and 6 cc/cm in the distal tibia. Diaphyseal defects were found to have the least variability with regard to the volume of graft material required for different specimens. Femoral diaphyseal defects required 7 cc/cm and tibial diaphyseal defects required 5 cc/cm. A slightly larger volume of allograft material was needed to fill all defects compared with autograft. CONCLUSION: This method allows one to estimate the amount of graft required for a defect of the femur and the tibia.

Anthropometry↗
PubMed2001

Anterior positioning of tibia during motion after anterior cruciate ligament injury.

PURPOSE: The purpose of this study was to describe the sagittal tibial translation and EMG activity of muscles v. medialis and lateralis, gastrocnemius, and hamstrings, during common locomotion, in patients with an anterior cruciate ligament deficiency (ACL-def) and uninjured controls. METHODS: In 12 ACL-def patients and 17 controls, sagittal tibial translation was registered with the CA-4000 electrogoniometer during level walking, cutting, and stair walking. Tibial position at each flexion angle was expressed relative to the femuro-tibial position at passive knee extension. EMG activity, measured with ME-4000, was normalized to the individual maximum isometric voluntary contraction for each muscle. RESULTS: During the weight-bearing phase of motion, the tibia was anteriorly positioned in all legs. In the injured leg, the tibia translated more rapidly to an anterior position that was maintained for a longer time during the gait cycle. In the noninjured knees, motions with increased load lead to an increased anterior tibial translation in contrast to the injured knees, where the maximum displacement was already reached during level walking. The quadriceps and gastrocnemius muscles were simultaneously active during stance phase. Hamstrings were mainly active when the knee was close to extension and translation increased in spite of this activity. CONCLUSIONS: The mechanism of the anterior positioning of tibia is qualitatively similar in the normal and the injured knee, but that position is obtained much further forward in the ACL deficient knee. Quadriceps and gastrocnemius muscles seem to work synergistically to stabilize the knee by maintaining the anterior position of tibia during weight-bearing motion. The role of hamstrings to restrict anterior translation is questioned.

Adolescent↗
PubMed2002

Tibia valga due to focal fibrocartilaginous dysplasia: case report.

Focal fibrocartilaginous dysplasia is a rare benign entity, previously described as a factor responsible for causing tibia vara at the walking age. We report here the case of a child with tibia valga due to focal fibrocartilaginous dysplasia of the lateral part of the proximal tibia. To our knowledge, this is the first observation of a lesion located in the lateral proximal tibia. Clinical, radiographic and magnetic resonance imaging surveillance was performed. Spontaneous resolution of the lesion with correction of the angular deformity did occur.

Fibrous Dysplasia of Bone↗