Search PubMed⌕ Search

SEARCH · Search PubMed

Results for “Spectrophotometry”

Search indexed PubMed citations on genomics, clinical trials, systematic reviews and public health. Explore titles, authors and supplied subject terms, then open the PubMed record.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 271 records · Page 15Linked to original sources
PubMed1979

[Quantitative determination of drugs by in situ spectrophotometry of chromatograms for pharmacokinetic studies. I. Sulpiride and other benzamides, vincamine, naftazone (author's transl)].

Assays are proposed for sulpiride and other benzamides, vincamine and naftazone in plasma (or blood) and urine with direct UV reflectance spectrophotometry on this are applied directly on TLC along with a calibration curve on each plate. Plasma (or total blood) samples are extracted, and an internal standard is added before aplication; slopes of the obtained calibration curves do not change significantly from plate to plate, thus allowing several determinations on the same plate. The sensitivity is 2 microgram in a 1-ml sample (amount applied 30 ng) for sulpiride and related compounds and about the same for vincamine. Naftazone is determined in plasma with simultaneous reflectance and transmittance spectrophotometric measurements at 520 nm on chromatoplates sprayed with lead acetate, the sensitivity reached is 10 ng in a 1-ml sample (amount applied 0.5 ng). For all drugs studied, the proposed techniques are specific, reliable and sensitive enough and can be used to perform pharmacokinetic studies in human or in animal after administration of doses in the therapeutic range.

Animals↗
PubMed2001

Determination of the dissociation constants of sulfonated azo dyes by capillary zone electrophoresis and spectrophotometry methods.

The dissociation constants of 10 sulfonated azo dyes, six of the most common food colours used as additives (Food Yellow 4, Food Yellow 3, Food Red 9, Food Red 7, Food Red 17 and Food Blue 5), and four commonly used as textile dyes (Acid Orange 7, Acid Orange 12, Acid Red 26 and Acid Red 88), have been determined by two different systems, one by using capillary electrophoresis (CE) with diode array detection and the other by using UV-visible absorption spectrophotometry, which has been used as reference method to obtain the pKa values. The pKa values obtained by CE were determined in two ways, first on the basis of the electrophoretic mobilities (calculated from the migration times), and after we propose a new methodology, in which the dissociation constants are determined from the spectra corresponding to the maxima of electrophoretic peaks. The pKa values obtained by using these CE methods have been compared with those obtained by using the spectrophotometric method. The results show that the pKa values obtained by the CE proposed method are in general closer to the reference values than those obtained from the electrophoretic mobilities. Moreover, the proposed method retains the advantages of CE, as the possibility of working with small amounts of sample, despite its purity.

Azo Compounds↗
PubMed2002

Using spectrophotometry and spectral mapping technique for the study of the production of manganese-dependent and manganese-independent peroxidases by Pleurotus ostreatus.

The activity of manganese-dependent and manganese-independent peroxidases produced by Pleurotus ostreatus in culture media composed of agro-residues was measured by visible spectrophotometry. The overall enzyme activity and its selectivity were separated by using spectral mapping technique followed by nonlinear mapping. The relationships between the parameters of enzyme production and the composition of culture media and fermentation time was assessed by stepwise regression analysis. Calculations proved that the addition of extract of straw to the culture media significantly decreased the overall production of both enzymes, whereas the selectivity of enzyme production was influenced by amount of potato extract and the concentration of total sugar in the culture media. Enzyme activity depended quadratically on the fermentation time.

Culture Media↗
PubMed2001

Derivative spectrophotometry as a tool for the determination of drug partition coefficients in water/dimyristoyl-L-alpha-phosphatidylglycerol (DMPG) liposomes.

The partition coefficients (K(p)) between lipid bilayers of dimyristoyl-L-alpha-phosphatidylglycerol (DMPG) unilamellar liposomes and water were determined using derivative spectrophotometry for chlordiazepoxide (benzodiazepine), isoniazid and rifampicin (tuberculostatic drugs) and dibucaine (local anaesthetic). A comparison of the K(p) values in water/DMPG with those in water/DMPC (dimyristoyl-L-alpha-phosphatidylcholine) revealed that for chlordiazepoxide and isoniazid, neutral drugs at physiological pH, the partition coefficients are similar in anionic (DMPG) and zwitterionic (DMPC) liposomes. However, for ionised drugs at physiological pH, the electrostatic interactions are different with DMPG and DMPC, with the cationic dibucaine having a stronger interaction with DMPG, and the anionic rifampicin having a much larger K(p) in zwitterionic DMPC. These results show that liposomes are a better model membrane than an isotropic two-phase solvent system, such as water-octanol, to predict drug-membrane partition coefficients, as they mimic better the hydrophobic part and the outer polar charged surface of the phospholipids of natural membranes.

Chlordiazepoxide↗
PubMed1999

Simultaneous determination of chlordiazepoxide and clidinium bromide in pharmaceutical formulations by derivative spectrophotometry.

A direct and simple first derivative spectrophotometric method has been developed for the simultaneous determination of clidinium bromide and chlordiazepoxide in pharmaceutical formulations. Acetonitrile was used as solvent for extracting the drugs from the formulations and subsequently the samples were evaluated directly by derivative spectrophotometry. Simultaneous determination of the drugs can be carried out using the zero-crossing method for clidinium bromide at 220.8 nm and the graphical method for chlordiazepoxide at 283.6 nm. The calibration graphs were linear in the ranges from 0.983 to 21.62 mg/l of clidinium bromide and from 0. 740 to 12.0 mg/l of chlordiazepoxide. The ingredients commonly found in commercial pharmaceutical formulations do not interfere. The proposed method was applied to the determination of these drugs in tablets.

Acetonitriles↗
PubMed2001

Spectra interference between diquat and paraquat by second derivative spectrophotometry.

A rapid and accurate method, combining solid-phase extraction and second-order derivative spectrophotomety approaches, is developed for the simultaneous determination of diquat (DQ) and paraquat (PQ) in blood, tissue and urine samples. Supernatant resulting from the precipitation of protein (with trichloroacetic acid) in plasma and tissue or Amberlite IRA-401 resin treated urine are passed through a mini-column packed with Wakogel gel (Silica gel). Analytes are then eluted with a non-organic solvent, 0.2mol/l HCl solution containing 2mol/l NH(4)Cl. UV spectrum of the eluent in 220-350nm range provides effective screen to detect the presence of DQ and/or PQ. In the presence of DQ or PQ alone, the analyte present is quantitated by conventional zero- or second-order derivative spectrophotometry. The calibration curve in the 0.1-5.0mg/l range for either analyte obeys Beer's law. When both DQ and PQ are present, their concentrations are determined by the peak amplitudes of their respective second-derivative spectra after the addition of alkaline dithionite reagent. Interference is negligible when the DQ/PQ concentration ratio is within the 5.0-0.2 range. Using a 2-ml of sample size, the detection limits for DQ and PQ in plasma are 0.02 and 0.005mg/l. The corresponding detection limits for urine samples (10ml sample size) are 0.004 and 0.001mg/l. Recoveries of DQ and PQ in triplicate plasma and urine samples spiked with 0.5mg/l of analytes are 93 and 85%. The precision of the proposed method resulting from triplicate study of spiked urine samples varies from 3.2 to 4.6% at 0.5mg/l of DQ and PQ, respectively.

Diquat↗
PubMed1988

Reflectance spectrophotometry, cerebral blood flow and congestion in young rabbit brain.

Reflectance spectrophotometry was applied to examine experimental cerebral oxygenation and hemodynamics in young rabbits. The estimated brain tissue SO2 level (ISO2) showed a prompt response to acute hypoxemia. The estimated brain tissue hemoglobin concentration (IHb) showed good correlation with CBF changes, estimated by the H2 clearance method, on hypoxemia or hypercarbia, and with cerebral congestion on neck venous compression. Moreover, trend recording of IHb and ISO2 was useful for monitoring the cerebral oxygenation and hemodynamic changes, including CBF as well as congestion.

Animals↗
PubMed2000

Determination of zopiclone in tablets by HPLC and UV-spectrophotometry.

Rapid, simple and accurate chromatographic (HPLC) and spectrophotometric methods for the determination of zopiclone in tablets were elaborated. Acetonitrile was found to be a suitable extraction solvent. The samples were chromatographed on Nova-Pak C18 column and UV detection at 304 nm. The elution was achieved isocratically with a mobile phase of 0.067 M phosphate buffer pH 7.95 - acetonitrile (55:45, v/v). Diazepam was applied as an internal standard. The method was validated for precision, linearity, accuracy and limit of detection. The recovery (mean +/- SD) in HPLC was 99.85 + 0.04% and in the UV-spectrophotometry 100.08 +/- 0.09%.

Azabicyclo Compounds↗
PubMed2001

Simultaneous determination of paracetamol and methocarbamol in tablets by ratio spectra derivative spectrophotometry and LC.

The application of the ratio spectra derivative spectrophotometry and high-performance liquid chromatography (HPLC) to the simultaneous determination of paracetamol (PAR) and methocarbamol (MET) in combined pharmaceutical tablets is presented. The spectrophotometric procedure is based on the use of the first derivative of the ratio spectra obtained by dividing the absorbtion spectrum of the binary mixtures by a standard spectrum of one of the compounds. The first derivative amplitudes were measured at 243.0 and 230.3 nm for the assay of PAR and MET, respectively. Calibration graphs were established for 2-30 microg ml for PAR and 2-36 microg/ml for MET in binary mixture. The detection limits for PAR and MET were found 0.097 and 0.079 microg/ml, respectively; while the quantification limits were 0.573 microg/ml for PAR and 1.717 microg/ml for MET. For the HPLC procedure, a reversed-phase column with a mobile phase of methanol-water (60:40, v/v), was used to separate both compounds with a detection of 274.0 nm. Linearity was obtained in the concentration range of 2 300 and 1.5-375 microg/ml for PAR and MET, respectively. The detection and quantification limits were found to be 0.42 and 1.4 microg/ml for PAR and 0.36 and 1.2 microg/ml for MET, respectively. The relative standard deviations were found to be less than 0.52%, indicating reasonable repeatibility of both methods. The proposed methods were successfully applied to the determination of these drugs in commercial tablets.

Acetaminophen↗
PubMed2001

Determination of cisapride in pharmaceutical preparations using derivative spectrophotometry.

Derivative spectrophotometric and high performance liquid chromatographic methods (HPLC) were described for the determination of cisapride in pharmaceutical preparations. Spectrophotometrically, cisapride was determined by measuring the 1D-values at 264, 300 nm and 2D-values at 276, 290 and 276-290 nm. Beer's Law was obeyed in the range 2-12 microg ml(-1). The HPLC method depends upon using micropack-Si-10 column at ambient temperature with a mobile phase consisting of methanol-concentrated ammonia (99.25:0.75) at a flow rate of 1 ml min(-1). Quantitation was achieved by UV detection at 272 nm using quinine as internal standard. Calibration curve was linear over the concentration range 2-10 microg ml(-1). Both derivative spectrophotometry and HPLC methods showed good linearity, precision and reproducibility. No interference was found from tablet or suspension matrices at the selected derivative wavelengths and chromatographic conditions. The proposed methods were successfully applied to the assay of commercial tablets and suspension. The procedures were rapid, simple and suitable for quality control applications.

Chromatography, High Pressure Liquid↗
PubMed2001

Quantitative analysis of metronidazole in intravenous admixture with ciprofloxacin by first derivative spectrophotometry.

Metronidazole in parenteral admixture with ciprofloxacin was analysed by first-derivative spectrophotometry using the zero-crossing technique of measurement. The procedure did not require prior separation steps. The method was found to be linear (r(2)>0.999) in the range of 2.5-10 microg ml(-1) for metronidazole in absence or presence (at constant concentration) of ciprofloxacin. The first-derivative method was applied for the analysis of intravenous admixture of metronidazole and ciprofloxacin and proved to be rapid, accurate and reproducible.

Anti-Infective Agents↗
PubMed2001

Simultaneous determination of valsartan and hydrochlorothiazide in tablets by first-derivative ultraviolet spectrophotometry and LC.

First-derivative ultraviolet spectrophotometry and high-performance liquid chromatography (HPLC) were used to determine valsartan and hydrochlorothiazide simultaneously in combined pharmaceutical dosage forms. The derivative procedure was based on the linear relationship between the drug concentration and the first derivative amplitudes at 270.6 and 335 nm for valsartan and hydrochlorothiazide, respectively. The calibration graphs were linear in the range of 12.0-36.1 microg x ml(-1) for valsartan and 4.0-12.1 microg x ml(-1) for hydrochlorothiazide. Furthermore, a high- performance liquid chromatographic procedure with ultraviolet detection at 225 nm was developed for a comparison method. For the HPLC procedure, a reversed phase column with a mobile phase of 0.02 M phosphate buffer (pH 3.2)-acetonitrile (55: 45; v/v), was used to separate for valsartan and hydrochlorothiazide. The plot of peak area ratio of each drug to the internal standard versus the respective concentrations of valsartan and hydrochlorothiazide were found to be linear in the range of 0.06-1.8 and 0.07-0.5 microg x ml(-1), respectively. The proposed methods were successfully applied to the determination of these drugs in laboratory-prepared mixtures and commercial tablets.

Antihypertensive Agents↗
PubMed2002

Determination of triamterene and leucovorin in biological fluids by UV derivative-spectrophotometry and partial least-squares (PLS-1) calibration.

The resolution of binary mixtures of triamterene (TAT) and leucovorin (LV) by application of first-derivative spectrophotometry and by application of Partial Least Squares calibration (PLS-1) was performed. Triamterene is determined in presence of leucovorin directly in the absorption spectra at 358 nm, and leucovorin is determined in the first-derivative spectra at 305.6 nm, zero-crossing of the triamterene. The mean recovery values in urine samples were 102 and 97% for TAT and LV, respectively. Partial Least Squares calibration (PLS-1) multivariate calibration of spectrophotometric data, have been applied to the determination of these compounds in serum and in urine without pretreatment of the samples. The absorption spectra of samples of serum or urine, spiked with triamterene and/or leucovorin, were used to perform the optimization of the calibration matrices by PLS-1 method. Mean recovery values were of 107 and 108% for TAT and LV in serum samples, and 98 and 91% for TAT and LV in urine samples.

Calibration↗
PubMed2002

Analysis of reboxetine, a novel antidepressant drug, in pharmaceutical tablets by capillary electrophoresis and derivative spectrophotometry.

The recent antidepressant drug reboxetine was quantified in pharmaceutical tablets by derivative spectrophotometry and capillary zone electrophoresis. The feasible sample pretreatment consists of a single extraction with a pH 2.5 phosphate buffer, centrifugation and dilution. For the spectrophotometric assay, the fourth derivative of the absorbance was used which gave satisfactory results in terms of accuracy (mean recovery 99.7%) and precision (mean RSD 3.4%). The electrophoretic experiments were carried out using the shortest effective length of the capillary (8.5 cm) in order to obtain a very rapid separation of reboxetine and dibenzepine used as the internal standard. Using a pH 2.5, 50 mM phosphate buffer as the background electrolyte, each analysis lasted less than 2.5 min. Accuracy (101.3%) and precision (1.5%) were very good.

Antidepressive Agents↗
PubMed2002

Simultaneous determination of terbinafine HCL and triamcinolone acetonide by UV derivative spectrophotometry and spectrodensitometry.

A binary mixture of terbinafine hydrochloride and triamcinolone acetonide was determined by three different methods. The first one concerned with determination of both drugs using first derivative (D(1)) spectrophotometric technique at 297 and 274 nm over concentration ranges of 5-30 and 4-24 microg ml(-1), with mean percentage accuracies 99.90+/-0.67 and 100.25+/-0.49, respectively. The second method depends on ratio-spectra 1st derivative (RSD(1)) spectrophotometry at 298 and 248 nm over the same concentration ranges with mean percentage accuracies 100.22+/-0.51 and 99.93+/-0.56, respectively. The spectrodensitometric analysis provides a rapid and precise method for the separation and quantitation of both terbinafine hydrochloride and triamcinolone acetonide. The method depends on the quantitative densitometric evaluation of thin layer chromatogram of terbinafine hydrochloride and triamcinolone acetonide at 283 and 238 nm over concentration ranges of 5-25 and 2.5-22.5 microg spot(-1), with mean percentage accuracies 100.66+/-0.51 and 100.27+/-0.73, respectively. The suggested procedures were checked using laboratory prepared mixtures and were successfully applied for the analysis of their pharmaceutical preparations. The three methods retained their accuracy and precision when applying the standard addition technique. The results obtained by applying the proposed methods were statistically analysed and compared with those obtained by a reported method.

Anti-Inflammatory Agents↗
PubMed2002

Determination of theophylline and ephedrine HCL in tablets by ratio-spectra derivative spectrophotometry and LC.

Two methods are described for the determination of theophylline (THP) and ephedrine hydrochloride (EPH) in combined pharmaceutical tablet forms. The first method depends on the use of the first derivative of the ratio-spectra obtained by dividing the absorption spectrum of binary mixtures by a standard spectrum of one of the compounds. The first derivative amplitudes at 231.8 and 250.3 nm were selected for the assay of THP and EPH, respectively. Calibration graphs were established for 20-180 microg ml(-1) for THP and 10-50 microg ml(-1) for EPH. The second method is based on high-performance liquid chromatography on a reversed-phase column using a mobile phase of methanol-water (40+60,v/v) (pH 3) with detection at 217 nm. Linearity was obtained in the concentration range of 5-150 microg ml(-1) for THP and 15-75 microg ml(-1) for EPH. The detection limits for THP and EPH were 0.73 and 0.92 microg ml(-1) by ratio-spectra derivative spectrophotometry and 0.59 and 0.86 microg ml(-1) by HPLC, respectively. The proposed methods were successfully applied to the determination of these drugs in laboratory-prepared mixtures and in tablets. The relative standard deviations were found to be less than 1.5%, indicating reasonable repeatibility of both methods.

Bronchodilator Agents↗
PubMed2002

Simultaneous determination of domperidone maleate and cinnarizine in a binary mixture using derivative ratio spectrophotometry and classical least squares calibration.

This work is concerned with the simultaneous determination of domperidone maleate (DOM) and cinnarizine (CINN) in a binary mixture form without previous separation by two different methods. The first method is the application of derivative ratio spectrophotometry where the linearity range was 2.5-30 micro g/ml, 2.5-25 micro g/ml for DOM and CINN, respectively, and percentage recoveries were 100.26+/-1.308 and 99.86+/-0.939 for DOM and CINN, respectively, in their laboratory prepared mixtures. The second method depends on the application of classical least squares (CLS) calibration model. Two training sets were constructed and the best model was used for the prediction of the concentrations of both drugs. The proposed procedures were successfully applied for the simultaneous determination of both drugs in laboratory prepared mixtures and in commercial tablet preparations. The validity of the proposed methods was assessed by applying the standard addition technique where the percentage recovery of the added standard was found to be 99.83+/-1.861 and 98.38+/-0.871 for DOM and CINN, respectively, using the derivative ratio method and 99.53+/-0.916 and 99.39+/-0.599 for DOM and CINN, respectively, using the CLS method. The proposed procedures are rapid, simple, require no preliminary separation steps and can, therefore, be used routine analysis of both drugs in quality control laboratories.

Antiemetics↗
PubMed2003

Derivative spectrophotometry in the analysis of mixtures of cefotaxime sodium and cefadroxil monohydrate.

Derivative spectrophotometry (ratio-spectra 1st- and 2nd-derivative and zero-crossing 2nd-derivative techniques) was applied for the determination of some cephalosporins in two component mixtures. Cefotaxime sodium salt (C(16)H(16)O(7)N(5)S(2)Na) and cefadroxil monohydrate (C(16)H(17)N(3)O(5)S.H(2)O) were examined. In all procedures, the calibration plots are linear up to 43 microg/ml of each antibiotic, with r ranging from 0.9997 to 0.9999. In the ratio-spectra method, the measurements were taken at 239.5 and 291.5 nm (cefotaxime, 1st-derivative), 238 and 283 nm (cefadroxil, 1st-derivative), 284 and 303 nm (cefotaxime, 2nd-derivative), and 229.5 and 245.5 nm (cefadroxil, 2nd-derivative). Detection limits at P=0.05 level of significance, calculated by a statistical treatment of calibration data, ranged from 0.15 to 0.58 microg/ml. LOD and LOQ ranged, respectively, from 0.19 to 0.51 and from 0.63 to 1.70 microg/ml. By the zero-crossing 2nd-derivative method, lines of regression are linear at 257 and 279 nm (cefotaxime) and 242 and 296 nm (cefadroxil). Detection limits from 0.28 to 0.51 microg/ml. LOD and LOQ from 0.27 to 0.41 and from 0.90 to 1.37 microg/ml, respectively. All the samples were tested for stability in solution and in the course of actual analysis, up to 80 h from their preparation. The developed derivative spectrophotometric methods were applied to synthetic mixtures and the RSD values ranged between 0.05 and 1.35% (ratio-spectra technique) and 0.01 and 1.07% (zero-crossing technique). The methods were also applied to vials and tablets for these drugs. The recoveries obtained were between 100.9 and 102.4% (ratio-spectra) and between 99.8 and 102.0% (zero-crossing). The procedures are simple, rapid, and did not require any preliminary separation or treatment of the samples. Instrumentation commonly available was utilised. The cephalosporins analysed are frequently used antibiotics of relevant clinical and pharmacological importance; hence this work would be of interest for the readers of journals devoted to pharmaceutical and biomedical analysis.

Cefadroxil↗