Search PubMed⌕ Search

SEARCH · Search PubMed

Results for “Potassium Compounds”

Search indexed PubMed citations on genomics, clinical trials, systematic reviews and public health. Explore titles, authors and supplied subject terms, then open the PubMed record.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 271 records · Page 15Linked to original sources

Influence of the concentration of phosphorus, potassium, calcium and iron compounds on the microbial reduction of sulphates.

In the reduction process of sulphates by Desulfovibrio desulfuricans suitable concentration of mineral salts plays an important role. In particular, different K2HPO4, CaCl2 and Fe(NH4)2(SO4)2 content in the reaction medium has an observable effect on the reduction degree (x'), the induction time (t0) and the reduction rate constant (k). These data were recorded for 9 liquid media characterized by different content of mineral salts. The reaction rate constants were calculated for the reduction process in each medium. Optimal reduction conditions exists at the following element concentration ratios: P/S=0.068, K/S=0.086, Fe/S=0.08, N/S=0.33, C/S=1.80, Ca/S=0.03, Cl/S=0.80.

Calcium↗

Reactivation of phosphorodiamidated acetylcholinesterase and neuropathy target esterase by treatment of inhibited enzyme with potassium fluoride.

It has been thought that the phosphorus-enzyme bond in inhibited esterases inhibited by such agents as mipafox (N,N'-di-iso-propylphosphorodiamidate) was refractory to reactivating agents either because an 'aging' reaction occurs soon after inhibition or because the bond was intrinsically very strong. We have found that both acetylcholinesterase (AChE) and neuropathy target esterase (NTE) which had been inhibited with either mipafox or with a di-n-butylphosphorodiamidate could be reactivated by prolonged treatment with aqueous potassium fluoride (KF): the reaction proceeded with first-order kinetics. Furthermore there was no time-dependent loss of reactivatability (aging). Di-isopropylphosphoro-butyrylcholinesterase could be fully reactivated by this treatment but after 18 h to allow aging the monoisopropyl phosphoro-enzyme was totally refractory to KF. We conclude that it is likely that the mipafox-enzyme bond in inhibited NTE and AChE is relatively strong but that aging has not occurred. The local disturbance around the active site of NTE caused by attachment of the phosphorodiamidate molecule appears to be sufficient to initiate delayed neuropathy without necessity for an 'aging' reaction.

Acetylcholinesterase↗

Preparation, characterization & anticancer evaluation of potassium N-(p-anisole)-alpha-(2-xanthatophenyl)nitrone.

The new compound, Potassium-N-(p-anisole)-alpha-(2-xanthato-phenyl)nitrone of the formula K(p-MeOC6H4)N(O) ? CH(O-C6H4CS2) was prepared and characterized by elemental analysis, infrared, UV spectra and 1HNMR spectroscopy. The anticancer activity of it has been achieved by the National Cancer Institute (NCI) U.S.A. A remarkable activity was exhibited against nine types of cancer cells specially the colon, ovarian and CNS cancer.

Antineoplastic Agents↗

Surface-catalysed disinfection of thick Pseudomonas aeruginosa biofilms.

Transition metal catalysts were incorporated into polymers which formed the surface for bacterial attachment and biofilm formation in a constant depth film fermenter (100 microns thickness), flow chamber (about 30 microns thickness) and in batch culture (< 30 microns thickness). The catalysts drive the breakdown of persulphates to reactive oxygen species. When Pseudomonas aeruginosa biofilms were exposed to dilute solutions of potassium monopersulphate (20 micrograms ml-1-1 mg ml-1), significant enhancement of killing was notable for catalyst-containing surfaces over that of controls. The degree of enhancement was greatest for thin films, but was nevertheless significant for the 100 microns thick biofilms. Fluorescence probes and viability staining, in conjunction with laser confocal microscopy, showed that reactive species were generated at the biofilm-substratum interface and killed the biofilm from the inside. Reaction-diffusion limitation now concentrates the active species within the biofilm rather than protecting it, and a diffusion bump is established whereby further treatment agent is drawn to the substratum enabling relatively thick biofilms to be disinfected.

Biofilms↗

Improving sensitivity in simultaneous determination of copper carboxylates by nonaqueous capillary electrophoresis.

A new method of nonaqueous capillary electrophoresis (NACE) with UV spectrophotometric detection was developed and optimized for the simultaneous determination of seven carboxylates (trans-1,2-diaminocyclohexane-N,N,N',N'-tetraacetic acid (CDTA), diethylenetriaminepentaacetic acid (DTPA), ethylenediaminetetraacetic acid (EDTA), N-(2-hydroxyethyl)ethylenediamine-N,N',N'-triacetic acid (HEDTA), nitrilotriacetic acid (NTA), 1,3-diaminopropane-N,N,N',N'-tetraacetic acid (PDTA) and triethylenetetraaminehexaacetic acid (TTHA)) as copper complexes. The method development was carried out by using a fused silica capillary. Background electrolyte (BGE) was optimized and the best separation achieved by using 30mmolL(-1) potassium bromide in N-methylformamide (NMF) at apparent pH (pH(app)) 10.2. A voltage of +30kV and direct UV detection at 280nm were used in all measurements. Large-volume sample stacking using the electroosmotic flow pump (LVSEP) was tested in addition to basic capillary electrophoresis (CE) and observed to improve the separation of the analyte zones in the capillary. All the peaks in the electropherograms were properly separated, the calibration plots gave excellent correlation coefficients (R(2)>or=0.994) and all seven copper carboxylate complexes were detected in less than 20min using both the basic measurements and the large-volume sample stacking method. The new NACE method was tested with lake water and proved to be reliable.

Bromides↗

Single crystal EPR study of VO(II)-doped magnesium.

Single crystal EPR studies of VO(II)-doped magnesium potassium Tutton's salt have been carried out at room temperature. The results indicate that the paramagnetic impurity has entered the lattice, both substitutionally and interstitially and the maximum hyperfine for the substitutional site along the a axis corresponds to the minimum hyperfine for interstitial site and vice versa. The spin Hamiltonian parameters obtained from single crystal data for these sites are: Site 1, gparallel = 1.954(1); gperpendicular = 1.998(1), Aparallel = 19.80(2) mT; Aperpendicular = 7.61(2) mT; Site 2, gparallel = 1.997(1); gperpendicular = 1.952(1), Aparallel = 7.66(2) mT; Aperpendicular = 19.85(2) mT. Superhyperfine from ligand protons have been observed at certain orientations for Site 2 impurity. Powder spectrum shows a set of eight parallel and perpendicular features indicating the presence of only one site and these values matched with Site 1 values. From these observations, it has been concluded that the two vanadyl impurities are approximately at right angles to each other. Cooling the sample to 77 K does not change the spectra appreciably. The admixture coefficients have been calculated from Site 1 data, which agree well with the reported values.

Crystallization↗

Effects of potassium bicarbonate on distal nephron Na-K-ATPase in adrenalectomized rabbits.

Na-K-ATPase activity in the connecting tubule (CNT) and cortical collecting duct (CCD) has been shown to be influenced by KCl both in the presence and in the absence of aldosterone. To investigate if the aldosterone-independent effect of K+ on Na-K-ATPase can be produced by other K+ salts, we studied the effects of dietary KHCO3 on Na-K-ATPase and ouabain-insensitive Mg-ATPase activities in four nephron segments of adrenalectomized (ADX) rabbits. The segments examined were: the distal convoluted tubule (DCT), CNT, CCD and medullary collecting duct (MCD). All diets were similar in composition except their KHCO3 contents which were 100, 300, 500 and 700 meq/kg in groups 1 to 4 respectively. Increasing KHCO3 in the diet increased K+ excretion (7 X) and urine pH (6.6 to 8.3). Na-K-ATPase activity in the CCD increased greater than 200% as dietary KHCO3 was increased to 700 meq/kg. There was a linear relation between Na-K-ATPase activity in this segment and steady state plasma K+ as well as K+ excretion in the urine. However, Na-K-ATPase activity in the CCD was lower in KHCO3-fed ADX rabbits than the KCl-fed animals studied previously under similar conditions. There were no significant differences in Na-K-ATPase activities in DCT, CNT and MCD among the four groups given different KHCO3-diets. It is concluded that dietary intake of KHCO3 can also influence Na-K-ATPase activity in the CCD independent of aldosterone.

Adrenalectomy↗

Novel methodology for the study of mercury methylation and reduction in sediments and water using 197Hg radiotracer.

Mercury tracers are powerful tools that can be used to study mercury transformations in environmental systems, particularly mercury methylation, demethylation and reduction in sediments and water. However, mercury transformation studies using tracers can be subject to error, especially when used to assess methylation potential. The organic mercury extracted can be as low as 0.01% of the endogenous labeled mercury, and artefacts and contamination present during methylmercury (MeHg) extraction processes can cause interference. Solvent extraction methods based on the use of either KBr/H2SO4 or HCl were evaluated in freshwater sediments using 197Hg radiotracer. Values obtained for the 197Hg tracer in the organic phase were up to 25-fold higher when HCl was used, which is due to the coextraction of 197Hg2+ into the organic phase during MeHg extraction. Evaluations of the production of MeHg gave similar results with both MeHg extraction procedures, but due to the higher Hg2+ contamination of the controls, the uncertainty in the determination was higher when HCl was used. The Hg2+ contamination of controls in the HCl extraction method showed a nonlinear correlation with the humic acid content of sediment pore water. Therefore, use of the KBr/H2SO4 method is recommended, since it is free from these interferences. 197Hg radiotracer (T1/2=2.673 d) has a production rate that is about 50 times higher than that of 203Hg (T1/2=46.595 d), the most frequently used mercury radiotracer. Hence it is possible to obtain a similar level of performance to 203Hg when it is used it in short-term experiments and produced by the irradiation of 196Hg with thermal neutrons, using mercury targets with the natural isotopic composition. However, if the 0.15% natural abundance of the 196Hg isotope is increased, the specific activity of the 197Hg tracer can be significantly improved. In the present work, 197Hg tracer was produced from mercury 51.58% enriched in the 196Hg isotope, and a 340-fold increase in specific activity with respect to natural mercury targets was obtained. When this high specific activity tracer is employed, mercury methylation and reduction experiments with minimum mercury additions are feasible. Tracer recovery in methylation experiments (associated with Me197Hg production from 197Hg2+ spike, but also with Hg2+ contamination and Me197Hg artefacts) with marine sediments was about 0.005% g-1 WS (WS: wet sediment) after 20 h incubation with mercury additions of 0.05 ng g-1 WS, which is far below natural mercury levels. In this case, the amount of Hg2+ reduced to Hg0 (expressed as the percent 197Hg0 recovered with respect to the 197Hg2+ added) varied from 0.13 to 1.6% g-1 WS. Me197Hg production from 197Hg2+ spike after 20 h of incubation of freshwater sediment ranged from 0.02 to 0.13% g-1 WS with mercury additions of 2.5 ng g-1 WS, which is also far below natural levels. 197Hg0 recoveries were low, 0.0058+/-0.0013% g-1 WS, but showed good reproducibility in five replicates. Me197Hg production from 197Hg2+ spiked in freshwater samples ranged from 0.1 to 0.3% over a period of three days with mercury additions of 10 ng L-1. A detection limit of 0.05% for Me197Hg production from 197Hg2+ spike was obtained in seawater in a 25 h incubation experiment with mercury additions of 12 ng L-1.

Bromides↗

Efficiency of solvent extraction methods for the determination of methyl mercury in forest soils.

Methyl mercury was determined by gas chromatography, microwave induced plasma, atomic emission spectrometry (GC-MIP-AES) using two different methods. One was based on extraction of mercury species into toluene, pre-concentration by evaporation and butylation of methyl mercury with a Grignard reagent followed by determination. With the other, methyl mercury was extracted into dichloromethane and back extracted into water followed by in situ ethylation, collection of ethylated mercury species on Tenax and determination. The accuracy of the entire procedure based on butylation was validated for the individual steps involved in the method. Methyl mercury added to various types of soil samples showed an overall average recovery of 87.5%. Reduced recovery was only caused by losses of methyl mercury during extraction into toluene and during pre-concentration by evaporation. The extraction of methyl mercury added to the soil was therefore quantitative. Since it is not possible to directly determine the extraction efficiency of incipient methyl mercury, the extraction efficiency of total mercury with an acidified solution containing CuSO4 and KBr was compared with high-pressure microwave acid digestion. The solvent extraction efficiency was 93%. For the IAEA 356 sediment certified reference material, mercury was less efficiently extracted and determined methyl mercury concentrations were below the certified value. Incomplete extraction could be explained by the presence of a large part of inorganic sulfides, as determined by x-ray absorption near-edge structure spectroscopy (XANES). Analyses of sediment reference material CRM 580 gave results in agreement with the certified value. The butylation method gave a detection limit for methyl mercury of 0.1 ng g(-1), calculated as three times the standard deviation for repeated analysis of soil samples. Lower values were obtained with the ethylation method. The precision, expressed as RSD for concentrations 20 times above the detection limit, was typically 5%.

Bromides↗

Differential effects of transmembrane potential on two Na+-dependent transport systems for neutral amino acids.

The effects of changes of membrane potential on amino acid transport through systems A, ASC and L was investigated in the Ehrlich cell and the human erythrocyte. Changes of membrane potential were produced by incubating cells whose K+ permeability had been increased, either by valinomycin or by activation of Ca2+-dependent K+ channels, in medium containing different K+ concentrations. The changes in membrane potential were followed by measuring the distribution ratio reached by lipophilic indicators. Transport through Na+-dependent system A was sensitive to the membrane potential, the rate of amino acid uptake increasing 2.2-3.1-times for each 60 mV-hyperpolarization. The Na+-dependent system ASC was insensitive to membrane potential. The Na+-independent system L was not directly affected by membrane potential, but the steady-state accumulation of system L substrates was increased by hyperpolarization.

4,4'-Diisothiocyanostilbene-2,2'-Disulfonic Acid↗

pCMBS-induced swelling of dogfish (Squalus acanthias) rectal gland cells: role of the Na+,K(+)-ATPase and the cytoskeleton.

(1) 0.1-1.0 mM p-chloromercuribenzene sulfonate (pCMBS) and some other organic mercurials produce a swelling of slices of dogfish shark (Squalus acanthias) rectal glands, with an uptake of cell Na+ and a loss of K+. In contrast, 1 mM N-ethylmaleimide (NEM) does not swell rectal gland cells (RGC), while affecting cell cations. (2) The slow entry of [203Hg]pCMBS is linearly related to its external concentration (10 microM-1 mM) and a small accumulation of pCMBS (apparent gradient about 3) in the cells occurs in 2 h. Cell 203Hg rapidly washes out of the cells (fast rate constant 0.153.min-1; slow rate constant 0.0067.min-1), and this efflux is accelerated by 1mM dithiothreitol. Thus, a major portion of pCMBS inter-acts rather loosely with cell components. (3) pCMBS and NEM share: (a) a negligible effect on the efflux of 86Rb+ and of [14C]urea; (b) a gradual inhibition of the cell Na+,K(+)-ATPase activity. (4) NEM as well as agents lowering cell glutathione accelerate and increase the pCMBS-induced cell swelling. Conditions inhibiting the Na+,K(+)-ATPase (ouabain, absence of Na+) have the same effect. (5) pCMBS, but not NEM produce a disappearance of the F-actin-phalloidin fluorescence independent of cell volume changes, particularly at the basolateral RGC membrane. (6) The data are consistent with the following set of events: (a) pCMBS (but not NEM) affects the cell membrane by increasing the efflux of the cell osmolyte taurine (Ziyadeh et al. (1988) Biochim. Biophys. Acta 943, 43-52 and unpublished data); (b) on entry into the cells, pCMBS and NEM interact with cell -SH, including those of the Na+,K(+)-ATPase; this action produces the observed changes in cell cations. Also, pCMBS, but not NEM, decrease F-actin at the membrane; (c) the inhibition of the Na+,K(+)-ATPase activity together with the decreased resistance of the cell membrane to stretch (absence of F-actin) produces the observed pCMBS-induced cell swelling by osmotic forces (intracellular non-diffusible anions).

4-Chloromercuribenzenesulfonate↗

Synthesis of protein, nucleosides and other organic compounds from cyanamide and potassium nitrite under possible primitive earth conditions.

The mixing of cyanamide and KNO2 produced changes from white solids to yellow liquid and then to orange solid. The gases cyanogen and ammonia were formed. No external energy was used. The reactions were carried out with a small amount of O2. The presence of proteins in the reaction product formed 13 months after the mixing was indicated by the positive reactions of the cyanamide-KNO2 reaction product with ninhydrin, microbiuret, and Folin reagent; the ultraviolet absorption at about 280 nm; the yield of 24% of 15 amino acids; and molecular weight measurements of more than 160,000. The presence of nucleosides, nucleic acid bases, hydrocarbons, and organic esters in the reaction product formed 2 months after the mixing was indicated by ultraviolet absorption at about 260 nm, and the results of ligand-exchange chromatography, paper chromatography, infrared analysis, mass spectral analysis, and NMR spectroscopy. Possible cyanamide-mediated dehydration reactions and mechanisms are discussed.

Amino Acids↗

Reducing red color intensity of seafood wastewater in facultative pond.

Studies were carried out on the growth of Chromatium sp. on seafood wastewater (SFWW), which under facultative conditions and light exposure produced red pigment. The strain grew and utilized organic matter in both dark and light exposure conditions, but it produced red pigment when exposed to light. The growth was repressed by aerobic condition. The red color intensity was reduced by about 32.5+/-1.5 and 70.8+/-2.8% when kept under dark and static conditions, or aerobic and light exposure conditions, respectively. The COD of SFWW and the number of cells of Chromatium sp. were also rapidly reduced by about 78.6+/-2.7 and 92.0+/-1.0%, respectively, under aerobic and light exposure condition. KNO3 and FeCl3 also reduced red color intensity and maximum removal of organic matter and red color were 30 and 4 mg/l, respectively. Aerobic conditions increased the color removal efficiency with 30 mg/l KNO3 and 4 mg/l FeCl3 treatments up to 96.5+/-1 and 98.9+/-1%, respectively.

Bacteria, Aerobic↗

Mechanical and fracture behavior of veneer-framework composites for all-ceramic dental bridges.

OBJECTIVES: High-strength ceramics are required in dental posterior restorations in order to withstand the excessive tensile stresses that occur during mastication. The aim of this study was to investigate the fracture behavior and the fast-fracture mechanical strength of three veneer-framework composites (Empress 2/IPS Eris, TZP/Cercon S and Inceram-Zirconia/Vita VM7) for all-ceramic dental bridges. METHODS: The load bearing capacity of the veneer-framework composites were evaluated using a bending mechanical apparatus. The stress distribution through the rectangular-shaped layered samples was assessed using simple beam calculations and used to estimate the fracture strength of the veneer layer. Optical microscopy of fractured specimens was employed to determine the origin of cracks and the fracture mode. RESULTS: Under fast fracture conditions, cracks were observed to initiate on, or close to, the veneer outer surface and propagate towards the inner framework material. Crack deflection occurred at the veneer-framework interface of composites containing a tough framework material (TZP/Cercon S and Inceram-Zirconia/Vita VM7), as opposed to the straight propagation observed in the case of weaker frameworks (Empress 2/IPS Eris). SIGNIFICANCE: The mechanical strength of dental composites containing a weak framework (K(IC)<3 MPam(1/2)) is ultimately determined by the low fracture strength of the veneer layer, since no crack arresting occurs at the veneer-framework interface. Therefore, high-toughness ceramics (K(IC)>5 MPam(1/2)) should be used as framework materials of posterior all-ceramic bridges, so that cracks propagating from the veneer layer do not lead to a premature failure of the prosthesis.

Aluminum Oxide↗

Cyclic fatigue in water of veneer-framework composites for all-ceramic dental bridges.

OBJECTIVES: Ceramic materials applied in dentistry may exhibit significant subcritical crack growth due to the severe cyclic loading in the aqueous environment encountered in the mouth during mastication. The authors report on the subcritical crack growth behavior of three dental restoration systems (Empress 2/IPS Eris, TZP/Cercon S and Inceram-Zirconia/Vita VM7) under cyclic loading in water, in order to establish guidelines for the use and design of long-lifetime all-ceramic posterior bridges. METHODS: Inert strength and lifetime tests under cyclic loading in an aqueous environment were performed in a mechanical bending apparatus and evaluated with Weibull statistics. RESULTS: Subcritical crack growth occurred predominantly in the outer veneer layer of the veneer-framework composites. The apatite-based veneer (IPS Eris) was more susceptible to subcritical crack propagation compared to the feldspathic glass veneers (Cercon S and Vita VM7). SIGNIFICANCE: Dental restoration systems containing apatite-based veneers and weak frameworks (Empress 2/IPS Eris) are not recommended for the fabrication of all-ceramic bridges in the molar region. Conversely, veneer-framework systems consisting of feldspathic glass veneers and tough zirconia-based frameworks (TZP/Cercon S and Inceram-Zirconia/Vita VM7) may exhibit lifetimes longer than 20 years if the bridge connector is properly designed.

Aluminum Oxide↗

Fate of pyrene in contaminated soil amended with alternate electron acceptors.

Creosote-contaminated soil samples from the Libby Ground Water Contamination Superfund Site in Libby, MT, were amended with the potential alternate electron acceptors (AEA) nitrate (KNO3), manganese oxide (MnO2), and amorphous iron oxyhydroxide (FeOOH) and incubated at low oxygen tensions (0-6% O2). The fate of 14C-pyrene was evaluated with respect to the different soil amendments. The fate of 14C from the radiolabeled pyrene with regard to mineralization and bound residue formation within soil humic fractions was not significantly different from controls for the iron and manganese amended soils. Nitrate amendments appeared to stimulate 14C-pyrene mineralization at a level of 170 mg NO3-N kg(-1), and inhibit mineralization at 340 mg NO3-N kg(-1). The stimulatory effect did not appear to be the result of nitrate serving as an electron acceptor. Although AEA amendments did not significantly affect the rate or extent of 14C-pyrene mineralization, results of oxygen-deprived incubations (purged with N2) indicate that AEA may be utilized by the microbial community in the unsaturated contaminated soil system.

Biodegradation, Environmental↗