Search PubMed⌕ Search

SEARCH · Search PubMed

Results for “POLYVINYLS”

Search indexed PubMed citations on genomics, clinical trials, systematic reviews and public health. Explore titles, authors and supplied subject terms, then open the PubMed record.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 271 records · Page 15Linked to original sources
PubMed2005

A two year in vivo study of polyvinyl alcohol-hydrogel (PVA-H) artificial meniscus.

For the recognized importance of knee meniscus function, the treatment of meniscus injury has been changing from resection to repair. However, depending on the type of injury, meniscectomy sometimes cannot be avoided. In such a case, it is important to anticipate the future problem of degenerative change or osteoarthrosis in the knee joint. In consideration of the prognosis and circumstances in such patients, we have developed an artificial meniscus using polyvinyl alcohol-hydrogel (PVA-H) for salvage. We have already reported the results up to 1 year after animal operation. The present study investigated the results in postoperative 2.0 years to assess further the use of artificial meniscus. In the results, the articular cartilage state of knee joint implanted PVA-H meniscus was good even after 2 years, while Osteoarthrosis (OA) change progressed in meniscectomy knee joint. In addition, neither wear, dislocation nor breakage of PVA-H was observed. These results proved that an artificial meniscus using PVA-H can compensate for meniscal function and might be clinically applicable.

Animals↗
PubMed2005

Application of electrochemically prepared polypyrrole-polyvinyl sulphonate films to DNA biosensor.

Double stranded calf thymus deoxyribonucleic acid (DNA) was physisorbed onto polypyrrole-polyvinyl sulphonate (PPY-PVS) films electrochemically deposited onto indium-tin-oxide (ITO) coated glass plates. These DNA immobilized PPY-PVS films optimized for various conditions, such as polymerization potential, pH of buffer, DNA concentration and scan rate were characterized using Fourier-transform infrared (FT-IR) spectroscopy, atomic force microscopy (AFM) and cyclic voltammetry (CV) techniques, respectively. The amperometric response studies of these DNA/PPY-PVS electrodes were carried out as a function of 2-aminoantharcene (2-AA, 0.01-20 ppm) and o-chlorophenol (OCP, 0.1-30 ppm) concentration, respectively at 25 degrees C. The observed amperometric current arising due to oxidation of guanine in the DNA/PPY-PVS films decreased linearly with the increase in the concentration of 2-AA and OCP. It has been revealed that 10 ppm of 2-AA is sufficient to reduce the observed guanine oxidation peak current by approximately -95+/-10% as compared to the reported values. A 25 ppm of OCP was capable enough to reduce the guanine oxidation current to zero. These DNA/PPY-PVS electrodes were found to have a shelf life of about 4 months when stored at 25 degrees C.

Anthracenes↗
PubMed2005

The role of metals in dioxin formation from combustion of newspapers and polyvinyl chloride in an incinerator.

Newspapers impregnated with NaCl mixed with various chloride metals (CuCl2, MgCl2, MnCl2, FeCl3, NiCl2, and CoCl2) and electric wire coated with polyvinyl chloride (PVC) were combusted in a well-controlled incinerator. Exhaust gas samples collected at the outlet of the incinerator were analyzed for dioxins (PCDDs, PCDFs, and coplanar PCBs) by gas chromatography/mass spectrometry. The amount of total dioxins formed from newspaper samples ranged from 34.2 ng/g (with NaCl+CoCl2) to 67.0 ng/g (with NaCl+CuCl2). PCDFs composed 88-94% of the total dioxins formed in the exhaust gases. The highest levels of PCDF isomers obtained were Cl3-CDF from the sample with NaCl+CuCl2 (14.8 ng/g), Cl2-CDF from the sample with NaCl+MgCl2 (12.3 ng/g), and Cl(1)-CDF from samples with NaCl+MnCl2 (12.6 ng/g), with NaCl+FeCl3 (11.8 ng/g), and with NaCl+NiCl2 (13.3 ng/g), and with NaCl+CoCl2 (8.62 ng/g). The total of Cl4-8-CDDs comprised 76-88% of the total Cl1-8-CDDs. In particular, Cl7-CDDs had the highest levels except for the sample with NaCl+NiCl2. Total dioxins formed from samples of electric wire coated with PVC and PVC alone were 38.3 ng/g and 112 ng/g, respectively, suggesting that the presence of copper reduced dioxin formation.

Dioxins↗
PubMed2005

Decolorization of mixtures of different reactive textile dyes by the white-rot basidiomycete Phanerochaete sordida and inhibitory effect of polyvinyl alcohol.

We tried to decolorize mixtures of four reactive textile dyes, including azo and anthraquinone dyes, by a white-rot basidiomycete Phanerochaete sordida. P. sordida decolorized dye mixtures (200 mg l-1 each) by 90% within 48 h in nitrogen-limited glucose-ammonium media. Decolorization of dye mixtures needed Mn2+ and Tween 80 in the media. Manganese peroxidase (MnP) played a major role in dye decolorization by P. sordida. Decolorization of dye mixtures by P. sordida was partially inhibited by polyvinyl alcohol (PVA) that wastewaters from textile industries often contain. This was caused by an inhibitory effect of PVA on the decolorization of Reactive Red 120 (RR120) with MnP reaction system. Second addition of Tween 80 to the reaction mixtures in the presence of PVA improved the decolorization of RR120. These results suggest that PVA could interfere with lipid peroxidation or subsequent attack to the dye.

Basidiomycota↗
PubMed2005

Comparison of particle penetration with non-spherical polyvinyl alcohol versus trisacryl gelatin microspheres in women undergoing premyomectomy uterine artery embolization.

AIM: The purpose of this study was to compare the depth of vascular penetration of non-spherical polyvinyl alcohol (PVA) versus trisacryl gelatin microspheres (MS) in women undergoing uterine artery embolization (UAE) immediately before transabdominal myomectomy. MATERIALS AND METHODS: A total of 17 patients who had been referred for embolization before myomectomy underwent bilateral uterine artery embolization using either 355-500 microm PVA (group A) or 700-900 microm MS (group B). The depth of penetration of the particles was assessed by identifying their presence and location in the resected specimen. RESULTS: Of the 17 women enrolled in this study, 10 were in group A and 6 in group B. One woman underwent embolization using both types of particle and was excluded from the analysis. Embolic particles were significantly (p = 0.048) more frequently located within the fibroid (4/6, 67%) in Group B than Group A (1/10, 10%). Particles were also identified in the perifibroid tissues in 4/6 (67%) in Group B and 4/10 (40%) in Group A, with no statistical difference. There were no procedural complications. CONCLUSION: MS particles (700-900 microm) penetrate significantly deeper into leiomyomata compared with non-spherical PVA (355-500 microm). MS may therefore confer advantages in UAE, as they may more specifically target the fibroid, allowing an earlier end-point to embolization and minimizing ischaemic damage to normal myometrium and ovaries.

Acrylic Resins↗
PubMed2005

Anomalous high activity of a subfraction of polyvinyl alcohol ice blocker.

Low molecular weight copolymers of polyvinyl alcohol (PVA) are known to be potent inhibitors of ice formation in solutions used for cryopreservation by vitrification, even at concentrations as low as one part per million. Concentrated aqueous solutions of these polymers tend to become turbid after preparation. Condensed particles causing turbidity were isolated from a commercially available PVA-based ice blocker (X-1000) and found to consist of a polymer subfraction that is especially effective at ice blocking. Fifty seven percentage (w/w) of ethylene glycol (EG) in distilled water and 0.025% of the condensate polymer showed similar stability against devitrification as 57% EG+0.1% ordinary X-1000. At higher concentrations, 56.9% EG+0.1% condensate polymer was as effective as 56% EG+1% ordinary X-1000. All solutions containing ice blocker showed much less devitrification during warming than a 57% EG control solution. The condensate polymer was found to be strongly self-associating and less water soluble than ordinary X-1000. The mean molecular weight of the condensate polymer was approximately 1400 compared to 2100 for ordinary X-1000. Proton NMR revealed no large chemical differences. Subtle differences in composition or stereochemistry, perhaps in local regions of molecules, must be responsible for the dramatic differences in physical behavior and ice blocking effectiveness of the condensate polymer.

Antifreeze Proteins↗
PubMed2003

Investigation of the release behavior of diethylhexyl phthalate from polyvinyl chloride tubing for intravenous administration based on HCO60.

The release behavior of diethylhexyl phthalate (DEHP) from polyvinyl chloride (PVC) tubing, which composes materials in an intravenous administration set (IAS), was investigated using polyoxyethylated hydrogenated castor oil (HCO60) in physiological saline (PS), distilled water for injection (DWI), and ribose, fructose, and glucose (TZ) solutions. The amount of DEHP released increased with increasing HCO60 concentration, and the cumulative amount of DEHP released after 4h increased in the following order: 50% TZ<DWI=PS. At HCO60 levels above and below critical micelle concentration, no significant increase in the amount of DEHP released was observed; the release of DEHP appeared due to molecular interactions between DEHP and HCO60 molecules rather than the solubilization of DEHP into micelles. The release behavior of DEHP was affected by the addition of sugars. The amount of DEHP released decreased with an increase in the mean numbers of equatorial OH groups n(e-OH) per molecule in the following order: glucose [n(e-OH);4.6]<fructose(3.0)<ribose(2.1). Molecular mobility of HCO60 was assumed to be restricted by interaction with the sugar molecule and/or the extent of microscopic viscosity. Interaction of HCO60 with the sugar, the difference in the mode, and/or the extent of molecular interaction between sugar and HCO60 appeared to induce the difference in release behavior, while the increase in the number of water molecules needed to hydrate sugar molecules seemed to decrease the amount of free water, thus allowing microscopic viscosity to increase and to restrict the mobility of HCO60. These results suggest that the release of DEHP from PVC tubing is closely associated with the interaction of DEHP with HCO60, and related to the molecular mobility of HCO60 in solution.

Castor Oil↗
PubMed2005

Release behavior of diethylhexyl phthalate from the polyvinyl-chloride tubing used for intravenous administration and the plasticized PVC membrane.

The release behavior of diethylhexyl phthalate (DEHP) from polyvinyl-chloride (PVC) tubing, which composes materials in an intravenous administration set, was investigated using polysorbate 80 (Tween 80) aqueous solutions. When Tween 80 solution was circulated in PVC tubing, the amount of DEHP released increased with increasing circulation velocity and temperature. In order to clarify the effect of temperature on the release behavior of DEHP, PVC films containing varying amounts of DEHP were mounted on a cylindrical shaft and rotated at 5 and 40 degrees C. The cumulative amount of DEHP released increased with an increase in temperature, the diffusion coefficients [Dx10(-10) cm2 min-1] at 5 and 40 degrees C were 9.1 and 156.0, respectively. The glass transition temperature (Tg) of PVC films decreased with an increase in DEHP in the PVC film, as measured by differential scanning calorimeter (DSC) and release of DEHP occurred at temperatures above Tg. These results indicate that the release of DEHP from PVC tubing is closely associated with the state of the PVC and is related to diffusion of DEHP throughout the PVC.

Algorithms↗
PubMed2005

Reducing the migration of di-2-ethylhexyl phthalate from polyvinyl chloride medical devices.

We attempted to determine the processing conditions for decreasing the migration of phthalate esters, particularly di-2-ethylhexyl phthalate (DEHP), from polyvinyl chloride (PVC) products using a drug solvent after dilution based on the package insert. PVC sheets and PVC tubing were subjected to optical irradiation (ultraviolet (UV), visible light irradiation) and heat treatment to determine whether they are deteriorated by these treatments. UV irradiation to one side of the PVC sheet decreased the levels of DEHP migration from the sheets by almost 50%, although the amount of DEHP content in PVC sheet was observed no significant change. On the other hand, the levels of DEHP migrating from the inner surface of PVC tubing UV-irradiated from the outer surface were not decreased compared with the control. Therefore, the surface structure was examined by conducting Fourier transform infrared spectroscopy (FT-IR), electron spectroscopy for chemical analysis (ESCA) and static angle of contact measurement. In FT-IR analysis, we found that the UV-irradiated PVC sheets were exhibited broadened absorption bands with time. In ESCA analysis, the chlorine content was decreased and the oxygen content was increased with time in UV-irradiated PVC sheets. Moreover, the other treated PVC sheets shows no significant change compared with the non-UV-irradiated PVC sheet. Therefore, the surface structure of the UV-irradiated PVC sheet was changed. As a result, the migration of DEHP from PVC products can be decreased with simple treatment, such as UV-irradiation. This could be a useful method to develop novel PVC products.

Cyclosporine↗
PubMed2005

The effects of polyvinyl alcohol on the in vitro stability and delivery of spray-dried protein particles from surfactant-free HFA 134a-based pressurised metered dose inhalers.

The objective of the present study was to investigate the physical stability of spray-dried proteins within surfactant-free hydrofluoroalkane (HFA) pressurised metered dose inhalers (pMDIs) during prolonged storage. Two model proteins (lysozyme and catalase) were spray-dried and stabilised in the presence of excipients, and subsequently suspended within HFA 134a. The pMDIs were stored valve-up for 6 months at room temperature (ca. 25 degrees C). Activities of the proteins were determined using biological assays and the fine particle fraction of the pMDIs was measured using a twin-stage impinger. The biological activities of catalase and lysozyme were found to be preserved in the presence of sugars and/or 80% hydrolysed polyvinyl alcohol (PVA) during spray drying. In addition, suspending the stabilised proteins within HFA for up to 6 months had little effect on their activity. The aerosolisation performance of lysozyme or catalase formulations containing either sucrose or trehalose as stabilisers appeared to deteriorate as a function of storage time. However, those formulations containing PVA were found to generate the greatest fine particle fraction, which in some cases was up to 50%, and to possess excellent physical stability during storage. The results indicated that the presence of PVA in the spray-dried stabilised protein particles could enhance the physical stability of particles, when suspended in the surfactant-free HFA MDI formulations, without affecting the protein stability upon prolonged storage.

Aerosol Propellants↗
PubMed2005

Stability of latanoprost in an ophthalmic lipid emulsion using polyvinyl alcohol.

Latanoprost in water is not stable against heat stress due to hydrolysis of the isopropyl ester in the latanoprost molecule. Therefore, the storage condition of latanoprost ophthalmic solution, Xalatan brand, was in a low temperature (2-8 degrees C). We formulated a favorable ophthalmic lipid emulsion of latanoprost using polyvinyl alcohol as emulsifier which showed a good heat stability. The assays of the latanoprost ophthalmic lipid emulsions adjusted to pH 5.0, 6.0 and 7.0 were 100.4%, 100.7% and 99.2% after storage for 4 weeks at 60 degrees C, respectively. The possibility of room temperature storage for the latanoprost ophthalmic lipid emulsion was demonstrated.

Drug Stability↗
PubMed2004

Novel potentiometry immunoassay with amplified sensitivity for diphtheria antigen based on Nafion, colloidal Ag and polyvinyl butyral as matrixes.

A novel potentiometry immunoassay with amplified sensitivity has been developed for the detection of diphtheria antigen (Diph) via immobilizing diphtheria antibody (anti-Diph) on a platinum electrode based on Nafion, colloidal Ag (Ag), and polyvinyl butyral (PVB) as matrixes in this study. The modified procedure was further characterized by electrochemical impedance spectroscopy (EIS) and cyclic voltammetry (CV). The influence and factors influencing the performance of resulting immunosensor were studied in detail. The resulting immunosensor exhibited sigmoid curve with log Diph concentrations, high sensitivity (51.4 mV/decade), wide linear range from 8 to 800 ng ml(-1) with a detection limit of 1.5 ng ml(-1), rapid potentiometric response (<3 min) and long-term stability (>6 months). Analytical results of clinical samples show that the developed immunoassay is comparable with the enzyme-linked immunosorbent assays (ELISAs) method, implying a promising alternative approach for detecting diphtheria antigen in the clinical diagnosis.

Antigens↗
PubMed2004

Preparation of polyvinyl alcohol-polyacrylamide composite polymer membrane by gamma-irradiation for entrapment of urease.

Composite polymer membrane of polyvinyl alcohol (PVA) and acrylamide was prepared on cheesecloth support by gamma-irradiation induced free radical polymerization. The enzyme urease was entrapped in the membrane during polymerization and was cross-linked within the matrix using glutaraldehyde. The membranes could be reused a number of times without significant loss of urease activity.

Acrylic Resins↗
PubMed2006

Safety and reliability analysis in a polyvinyl chloride batch process using dynamic simulator-case study: Loss of containment incident.

In this paper, a novel methodology in batch plant safety and reliability analysis is proposed using a dynamic simulator. A batch process involving several safety objects (e.g. sensors, controller, valves, etc.) is activated during the operational stage. The performance of the safety objects is evaluated by the dynamic simulation and a fault propagation model is generated. By using the fault propagation model, an improved fault tree analysis (FTA) method using switching signal mode (SSM) is developed for estimating the probability of failures. The timely dependent failures can be considered as unavailability of safety objects that can cause the accidents in a plant. Finally, the rank of safety object is formulated as performance index (PI) and can be estimated using the importance measures. PI shows the prioritization of safety objects that should be investigated for safety improvement program in the plants. The output of this method can be used for optimal policy in safety object improvement and maintenance. The dynamic simulator was constructed using Visual Modeler (VM, the plant simulator, developed by Omega Simulation Corp., Japan). A case study is focused on the loss of containment (LOC) incident at polyvinyl chloride (PVC) batch process which is consumed the hazardous material, vinyl chloride monomer (VCM).

Computer Simulation↗
PubMed2004

The effect of Perasafe and sodium dichloroisocyanurate (NaDCC) against spores of Clostridium difficile and Bacillus atrophaeus on stainless steel and polyvinyl chloride surfaces.

Clostridium difficile is an important cause of nosocomial diarrhoea. The aim of this study was to evaluate the potential for Perasafe, a recently introduced biocide, to contribute to control of C. difficile spores in the patient environment, in comparison with the chlorine-releasing agent sodium dichloroisocyanurate (NaDCC). These agents were evaluated against a water control, in a surface test on stainless steel and polyvinyl chloride (PVC) floor covering, materials commonly found in the hospital environment. The organisms studied were a toxigenic clinical isolate of C. difficile, and Bacillus atrophaeus (formerly B. subtilis var niger). The data indicate that in our in vitro system, Perasafe was significantly more active than NaDCC (1000 ppm available chlorine) against C. difficile spores dried on stainless steel surfaces, and against B. atrophaeus on PVC floor covering material, achieving mean log10 reduction factors in viable counts of 6 and 5.5, respectively, at 10 min exposures. Perasafe appeared to be less lethal in 10 min exposures to C. difficile spores fixed on PVC floor covering material. In general, 1000 ppm chlorine generated from NaDCC showed lower log10 reduction factors in viable counts at 10 min, ranging from 0.7 to 1.5, than Perasafe which ranged from 2.7 to 6.0. The potential efficacy of Perasafe in reducing the density of C. difficile spores in the patient environment in hospitals, nursing homes or other long-stay facilities should be evaluated in field studies.

Acetic Acid↗
PubMed2004

Design and manufacture of a polyvinyl alcohol (PVA) cryogel tri-leaflet heart valve prosthesis.

Although current artificial heart valves are life sustaining medical devices, improvements are still necessary to address deficiencies. Bioprosthetic valves have a compromised fatigue life, while mechanical valves have better durability but are prone to thromboembolic complications. A novel, one-piece, tricuspid valve, consisting of leaflets, stent and sewing ring, made entirely from the hydrogel, polyvinyl alcohol cryogel (PVA-C), has been developed and demonstrated. This valve has three thin leaflets attached to a cylindrical stent. In order to approximate the complex shape of the surface of the natural heart valve leaflets, two different geometries have been proposed: revolution about an axis of a hyperboloid shape and revolution about an axis of an arc subtending (joining) two straight lines. The parameters of both geometries were examined based on a compromise between avoiding sharp curvature of leaflets and minimization of the central opening of the valve when closed. The revolution of an arc subtending two straight lines was selected as the preferred geometry since it has the benefit of a smaller central opening when the value of the maximum curvature for the leaflets is the same for each valve geometry. A cavity mold has been designed and constructed to form the PVA-C heart valve. The three leaflets were formed and integrated into the stent and sewing ring in a single process. Prototype heart valves were manufactured in the mold from a solution of PVA and water, by controlled freezing and thawing cycles.

Animals↗
PubMed2005

Preparation of fluorescent polyvinyl alcohol keto-derivatives nanoparticles and selective determination of chromium(VI).

A novel fluorescent polyvinyl alcohol keto-derivatives nanoparticle (PVAK) has been prepared in one-step method. The nanoparticles has excitation and emission maxima at 349 and 462 nm, respectively. Based on the fluorescence quenching of PVAK by Cr(VI), we established a simple and selective fluorimetric method for the determination of Cr(VI) without separation of Cr(III) in water. The reaction conditions between Cr(VI) and PVAK were investigated in detail. Furthermore, the reaction mechanism between PVAK and Cr(VI) was also discussed. Under optimal experimental conditions, a limit of detection of 0.02 microg mL(-1) was achieved. The calibration curve was linear over the concentration range 0.1-13.2 microg mL(-1) with a correlation coefficient of 0.9987. The proposed method has been applied to the selective quantification of Cr(VI) in synthetic samples and waste-water samples with the satisfactory results.

Carboxylic Acids↗
PubMed2006

Optical fibre chemical sensor for trace vanadium(V) determination based on newly synthesized palm based fatty hydroxamic acid immobilized in polyvinyl chloride membrane.

Fatty hydroxamic acid (FHA) immobilized in polyvinyl chloride (PVC) has been studied as a sensor element of an optical fibre chemical sensor for V(V). By using this instrument, V(V) in solution has been determined in the log concentration range of 0-2.5 (i.e. 1.0-300 mg/L). The detection limit was 1.0 mg/L. The relative standard deviation (R.S.D.) of the method for the reproducibility study at V(V) concentration of 200 mg/L and 300 mg/L were calculated to be 2.9% and 2.0%, respectively. Interference from foreign ions was also studied at 1:1 mole ratio of V(V):foreign ions. It was found that, Fe(III) ion interfered most in the determination of vanadium(V). Excellent agreement with ICP-AES method was achieved when the proposed method was applied towards determination of V(V).

Arecaceae↗