Search PubMed⌕ Search

SEARCH · Search PubMed

Results for “Arthrobacter”

Search indexed PubMed citations on genomics, clinical trials, systematic reviews and public health. Explore titles, authors and supplied subject terms, then open the PubMed record.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 271 records · Page 15Linked to original sources

Application of thermoalkalophilic xylanase from Arthrobacter sp. MTCC 5214 in biobleaching of kraft pulp.

A thermoalkalophilic and cellulase-free xylanase produced from Arthrobacter sp. MTCC 5214 by solid-state fermentation using wheat bran as a carbon source was evaluated for prebleaching of kraft pulp. The UV absorption spectrum of the compounds released by enzyme treatment showed a characteristic peak at 280 nm, indicating the presence of lignin in the released colouring matter. Enzymatic prebleaching of kraft pulp showed 20% reduction in kappa number of the pulp without much change in viscosity. Enzymatic treatment reduced the amount of chlorine by 29% without any decrease in brightness. The viscosity of xylanase treated pulp was 4.0 p, whereas the viscosity of the pulp treated exclusively with chlorine was 4.1 p.

Arthrobacter↗

Electrochemical sensor based on Arthrobacter globiformis for cholinesterase activity determination.

The sensors applied recently for determination of cholinesterase activity are mostly enzymatic amperometric sensors, in spite of their disadvantages: short life-time at ambient temperature, instability of the response, interferences, as well as passivation of the electrode surface. In the present paper a new approach for determination of cholinesterase activity was proposed, overcoming the main drawbacks of the analysis performed with amperometric enzymatic sensors. Instead of the immobilization of enzymes on a conducting electrode surface, whole cells of Arthrobacter globiformis, containing choline oxidase were fixed on a Clark type oxygen probe. Current proportional to bacteria respiration is registered as a sensor response. The application of whole cells of bacteria as a sensing element permits to achieve high stability of the response and long life-time of the sensor at ambient temperature, due to the conservation of the enzyme in its natural micro-environment inside the immobilized cells. The proposed sensor keeps its functionality more than 7 weeks stored in deionized water at ambient temperature. For the first 2 weeks the amplitude of the response decreases with only 10% and at the end of the studied 7 weeks period the response was 50% of the initial. The other advantages of the proposed sensor are: the dissolved oxygen is used as a mediator which concentration can be reliably and interferences free measured by the aim of a Clark type oxygen probe applied as a transducer; reproducible bacterial membranes can be elaborated by filtration of resuspended bacterial culture after preliminary determination of its activity; application of membranes containing lyophilized bacteria capable to be conserved infinitely long time and activated just before their application; negligible cost compared with the sensors based on immobilized enzymes. The steady-state response of the proposed bacterial sensor to choline obtained in 200 s is linear in the investigated concentration range up to 2 x 10(-4) moldm(-3), with detection limit of 8 x 10(-8) moldm(-3) and sensitivity of 4 x 10(-1) microAcm(3)mol(-1), at pH 6, temperature of 25 degrees C and stirring rate of 300 rpm. Choline is formed as a result of the catalytic hydrolysis (depending on the cholinesterase activity) of the substrate acetylcholine. Linear calibration graph for cholinesterase activity determination was obtained in the range up to 11 mUcm(-3), with a slope of 1.97 x 10(-2) microAcm(3)mU(-1), at pH 6, temperature of 25 degrees C and stirring rate of 300 rpm. The tests with reconstituted lyophilized serum with known activity used as a control sample confirm the accuracy of the proposed method. The relative error of the determination was only 2.82%.

Arthrobacter↗

Phenanthrene degradation in Arthrobacter sp. P1-1: initial 1,2-, 3,4- and 9,10-dioxygenation, and meta- and ortho-cleavages of naphthalene-1,2-diol after its formation from naphthalene-1,2-dicarboxylic acid and hydroxyl naphthoic acids.

Arthrobacter sp. P1-1, isolated from a polycyclic aromatic hydrocarbon (PAH)-contaminated site in Hilo, HI, USA, can decompose phenanthrene (40 mg l(-1)) completely within 7 days. A detailed phenanthrene metabolism map was constructed based on metabolite analysis and replacement cultures. Initial dioxygenation occurs on 1,2-, 3,4-, and 9,10-C of phenanthrene, dominantly on 3,4-C positions. Rapid accumulation of 5,6- and 7,8-benzocoumarin suggests that phenanthrene-1,2- and -3,4-diols mainly undergo meta-cleavage. However, a trace amount of o-carboxyvinylnaphthoates and diphenic acid indicates a limited extent of ortho-cleavage of the diols. Naphthalene-1,2-diol, as a common and converged metabolite, was formed from 1-[(E)-2-carboxyvinyl]-2-naphthoic acid, naphthalene-1,2-dicarboxylic acid, and 1-hydroxy-2-naphthoic acid in separate culture tests. Naphthalene-1,2-diol is then degraded in a dominant phthalic acid pathway and a minor salicylic acid pathway. Several metabolites of phthalic acid were found, while no salicylic acid metabolites were detected. The strain P1-1 likely has a very diverse set of PAH-degrading enzymes or the enzymes having relaxed substrate-specificity.

Arthrobacter↗

Characterization of Arthrobacter nicotinovorans HIM, an atrazine-degrading bacterium, from agricultural soil New Zealand.

Arthrobacter nicotinovorans HIM was isolated directly from an agricultural sandy dune soil 6 months after a single application of atrazine. It grew in minimal medium with atrazine as sole nitrogen source but was unable to mineralize 14C-ring-labelled atrazine. Atrazine was degraded to cyanuric acid. In addition to atrazine the bacterium degraded simazine, terbuthylazine, propazine, cyanazine and prometryn but was unable to grow on terbumeton. When added to soil, A. nicotinovorans HIM did enhance mineralization of 14C-ring-labelled atrazine and simazine, in combination with naturally occurring cyanuric acid degrading microbes resident in the soil. Using PCR, the atrazine-degradation genes atzABC were identified in A. nicotinovorans HIM. Cloning of the atzABC genes revealed significant homology (>99%) with the atrazine degradation genes of Pseudomonas sp. strain ADP. The atrazine degradation genes were held on a 96 kbp plasmid.

Agriculture↗

Optimization of culture conditions and properties of immobilized sulfide oxidase from Arthrobacter species.

Arthrobacter species strain FR-3, isolated from sediments of a swamp, produced a novel serine-type sulfide oxidase. The production of sulfide oxidase was maximal at pH 7.5 and 30 degrees C. Among various carbon and nitrogen sources tested, glucose and yeast extract were found to be the most effective substrates for the secretion of sulfide oxidase. The sulfide oxidase was purified to homogeneity and the molecular weight of the purified enzyme was 43 kDa when estimated by sodium dodecyl sulfate-polyacrylamide gel electrophoresis. The purified sulfide oxidase can be effectively immobilized in DEAE (diethylaminoethyl)-cellulose matrix with a yield of 66%. The purified free and immobilized enzyme had optimum activity at pH 7.5 and 6.0, respectively. Immobilization increases the stability of the enzyme with respect to temperature. The half-life of the immobilized enzyme was 30 min at 45 degrees C, longer than that of the free enzyme (10 min). The purified free sulfide oxidase activity was completely inhibited by 1 mM Co2+ and Zn2+ and sulfhydryl group reagents (para-chloromercuribenzoic acid and iodoacetic acid). Catalytic activity was not affected by 1 mM Ca2+, Mg2+, Na+ and metal-chelating agent (EDTA).

Arthrobacter↗

Chromium(V) complexes generated in Arthrobacter oxydans by simulation analysis of EPR spectra.

Chromium(V) is an intermediate formed during the reduction of Cr(VI) to Cr(III) compounds by various bacteria. However, little is known about the nature, localization and reactivity of Cr(V) species in microbial systems. Electron paramagnetic resonance (EPR) spectroscopy was used to study the nature of Cr(V) complexes generated in basalt-inhabiting Gram-positive Arthrobacter oxydans bacteria after exposure to high concentrations of Cr(VI). Numerical simulations of the EPR spectroscopic data provide strong evidence for at least two different diolato-type oxoCr(V) complexes (I, g(iso)=1.9801; II, g(iso)=1.9796) involving bacterial cell wall macromolecules in the Cr(VI)-A. oxydans system. The relative concentrations of the two oxoCr(V)-diolato species differ when Cr(VI) is incubated with either untreated A. oxydans cells (I:II approximately 50:50) or lyophilized cells (I:II approximately 10:90). Based upon the magnitudes of the proton superhyperfine coupling constants ((1)H a(iso)) for species I and II, the EPR simulation model is unable to distinguish unambiguously whether the oxoCr(V)-diolato species are linear alkoxides or cyclic diols (carbohydrates). The oxygen-containing functional groups associated with teichoic acids are the most likely candidates for complexation with the Cr(V) ion.

Arthrobacter↗

High-resolution crystal structure of Arthrobacter aurescens chondroitin AC lyase: an enzyme-substrate complex defines the catalytic mechanism.

Chondroitin lyases (EC 4.2.2.4 and EC 4.2.2.5) are glycosaminoglycan-degrading enzymes that act as eliminases. Chondroitin lyase AC from Arthrobacter aurescens (ArthroAC) is known to act on chondroitin 4-sulfate and chondroitin 6-sulfate but not on dermatan sulfate. Like other chondroitin AC lyases, it is capable of cleaving hyaluronan. We have determined the three-dimensional crystal structure of ArthroAC in its native form as well as in complex with its substrates (chondroitin 4-sulfate tetrasaccharide, CS(tetra) and hyaluronan tetrasaccharide) at resolution varying from 1.25 A to 1.9A. The primary sequence of ArthroAC has not been previously determined but it was possible to determine the amino acid sequence of this enzyme from the high-resolution electron density maps and to confirm it by mass spectrometry. The enzyme-substrate complexes were obtained by soaking the substrate into the crystals for varying lengths of time (30 seconds to ten hours) and flash-cooling the crystals. The electron density map for crystals soaked in the substrate for as short as 30 seconds showed the substrate clearly and indicated that the ring of central glucuronic acid assumes a distorted boat conformation. This structure strongly supports the lytic mechanism where Tyr242 acts as a general base that abstracts the proton from the C5 position of glucuronic acid while Asn183 and His233 neutralize the charge on the glucuronate acidic group. Comparison of this structure with that of chondroitinase AC from Flavobacterium heparinum (FlavoAC) provides an explanation for the exolytic and endolytic mode of action of ArthroAC and FlavoAC, respectively.

Amino Acid Sequence↗

Cold-active beta-galactosidase from Arthrobacter sp. C2-2 forms compact 660 kDa hexamers: crystal structure at 1.9A resolution.

The X-ray structure of cold-active beta-galactosidase (isoenzyme C-2-2-1) from an Antarctic bacterium Arthrobacter sp. C2-2 was solved at 1.9A resolution. The enzyme forms 660 kDa hexamers with active sites opened to the central cavity of the hexamer and connected by eight channels with exterior solvent. To our best knowledge, this is the first cold-active beta-galactosidase with known structure and also the first known beta-galactosidase structure in the form of compact hexamers. The hexamer organization regulates access of substrates and ligands to six active sites and this unique packing, present also in solution, raises questions about its purpose and function. This enzyme belongs to glycosyl hydrolase family 2, similarly to Escherichia coli beta-galactosidase, forming tetramers necessary for its enzymatic function. However, we discovered significant differences between these two enzymes affecting the ability of tetramer/hexamer formation and complementation of the active site. This structure reveals new insights into the cold-adaptation mechanisms of enzymatic pathways of extremophiles.

Amino Acid Sequence↗

Treatment of naphthalene-2-sulfonic acid from tannery wastewater by a granular activated carbon fixed bed inoculated with bacterial isolates Arthrobacter globiformis and Comamonas testosteroni.

The kinetics of naphthalene-2-sulfonic acid (2-NSA) adsorption by granular activated carbon (GAC) were measured and the relationships between adsorption, desorption, bioavailability and biodegradation assessed. The conventional Langmuir model fitted the experimental sorption isotherm data and introduced 2-NSA degrading bacteria, established on the surface of the GAC, did not interfere with adsorption. The potential value of GAC as a microbial support in the aerobic degradation of 2-NSA by Arthrobacter globiformis and Comamonas testosteroni was investigated. Using both virgin and microbially colonised GAC, adsorption removed 2-NSA from the liquid phase up to its saturation capacity of 140 mg/g GAC within 48 h. However, between 83.2% and 93.3% of the adsorbed 2-NSA was bioavailable to both bacterial species as a source of carbon for growth. In comparison to the non-inoculated GAC, the combination of rapid adsorption and biodegradation increased the amount (by 70-93%) of 2-NSA removal from the influent phase as well as the bed-life of the GAC (from 40 to >120 d). A microbially conditioned GAC fixed-bed reactor containing 15 g GAC removed 100% 2-NSA (100 mg/l) from tannery wastewater at an empty bed contact time of 22 min for a minimum of 120 d without the need for GAC reconditioning or replacement. This suggests that small volume GAC bioreactors could be used for tannery wastewater recycling.

Adsorption↗

Synthetic ferrichrome analogues with growth promotion activity for Arthrobacter flavescens.

Two families of trihydroxamic acid analogues of ferrichrome were chemically synthesized and tested for biological activity with Arthrobacter flavescens. Compounds using a tertiary amine as anchor showed little activity. Several compounds using tetrahedral carbon as anchor showed activity approaching or equalling that of the natural siderophore, ferrichrome. The biological activity is discussed in relation to physical and chemical properties of the analogues.

Arthrobacter↗

Structural studies on a sulfated polysaccharide from an Arthrobacter sp. by NMR spectroscopy and methylation analysis.

Structural characterization of a sulfated polysaccharide peptidoglycan complex (SP-PG) from an Arthrobacter sp. was performed by NMR spectroscopy and methylation analysis. In order to simplify the analyses, the desulfated SP-PG was used. NMR spectroscopy revealed the presence of a trisaccharide repeating unit and a disaccharide repeating unit. The trisaccharide unit was composed of two galactofuranosides and one glucopyranoside, and the disaccharide unit was of two galactopyranosides, as shown below. The methylation analysis showed that the polysaccharide consists mainly of a 4-linked galactopyranoside, a 6-linked galactopyranoside, a 6-linked galactofuranoside, a 2,6-linked galactofuranoside, a terminal galactopyranoside and a terminal glucopyranoside. These findings confirmed the structure indicated by the NMR spectroscopy. The repeating units determined in this study are novel.

Arthrobacter↗

Isolation, characterization and diuron transformation capacities of a bacterial strain Arthrobacter sp. N2.

A bacterial strain able to transform diuron was isolated from a soil by enrichment procedures. Strain isolation was realized by plating on minimal-agarose medium spread with this herbicide and selecting the colonies surrounded by a clear thin halo. One strain was characterized and identified as an Arthrobacter sp. It metabolized diuron and the final transformation product, 3,4-dichloroaniline, was produced in stoichiometric amounts. The transformation of diuron at different concentrations was more efficient in the presence of alternative sources of carbon and nitrogen. The bacterial activity was also evaluated in soil microcosms with a consequent disappearance of diuron and concomitant appearance of 3,4-dichloroaniline, of which the concentration decreased thereafter. Bacterial cells inoculated in the microcosms survived as viable but eventually nonculturable cells.

Arthrobacter↗

Biotransformation of phenylurea herbicides by a soil bacterial strain, Arthrobacter sp. N2: structure, ecotoxicity and fate of diuron metabolite with soil fungi.

In order to assess the influence of the aromatic substitution on the ability of a soil bacterial strain, Arthrobacter sp. N2, to degrade phenylurea herbicides, biotransformation assays were performed in mineral medium with resting cells of this soil bacterial strain on three phenylurea herbicides (diuron, chlorotoluron and isoproturon). Each herbicide considered, led to the formation of only one metabolite detected by HPLC analysis. After isolation, the metabolites were identified by NMR and MS, as the corresponding substituted anilines. According to the Microtox test (realized on the bacterium Vibrio fischeri), these metabolites presented non-target toxicity far more important (up to 600 times higher for 4-isopropylaniline) than the parent molecule. For isoproturon and chlorotoluron, the amount of substituted anilines obtained at the end of the biotransformation was very low, whereas the biotransformation of diuron into 3,4-dichloroaniline was almost quantitative. In this last case, the degradation product accumulated in the medium. In soil, other microorganisms are present that might degrade it. So the biotransformation of 3,4-dichloroaniline was then tested with four fungal strains: Aspergillus niger, Beauveria bassiana, Cunninghamella echinulata var. elegans and Mortierella isabellina. The aniline was further transformed with all the microorganisms tested. Only one metabolite was detected by HPLC analysis and after isolation, it was identified to be 3,4-dichloroacetanilide. This acetylated compound led to biological effects less important on V. fischeri than 3,4-dichloroaniline. These results stress the importance of identifying the degradation products to assess the impact of a polluting agent. Indeed, the pollutant may undergo transformation yielding compounds more toxic than the parent molecule.

Arthrobacter↗

Biochemical characterization of a haloalcohol dehalogenase from Arthrobacter erithii H10a.

Arthrobacter erithii H10a possesses two enzymes capable of catalyzing the dehalogenation of vicinal halohydrins which have been designated as dehalogenases DehA and DehC. The DehA dehalogenase demonstrated greater activity toward 1,3-dichloro-2-propanol (1,3-DCP) while the DehC dehalogenase showed higher activity toward 3-chloro-1,2-propanediol (3-CPD) and brominated alcohols. The DehA dehalogenase was composed of two non-identical subunits (relative molecular mass of 31.5 and 34 kDa) which probably associate with other proteins to form a large catalytically active protein of 200 kDa. The two subunits were purified and the amino acid sequence of their tryptic digests determined. The DehA enzyme catalyzed the conversion of vicinal halohydrins to epoxides and the reverse reaction in the presence of an excess of halogen. This enzyme had maximum activity at 50 degrees C and a broad pH optimum over the range 8.5-10.5. The apparent K(m) and Vmax values for dehalogenation of 1,3-DCP and 3-CPD were 0.105 mM and 223 mumol min-1 mg-1; and 2.366 mM and 1.742 mumol min-1 mg-1, respectively. The enzyme was inhibited by 2-chloroacetic acid (MCA) and 2,2-dichloroacetic acid (DCA). The inhibition pattern suggested a mixed type inhibition which was predominantly uncompetitive. Amino acid modification experiments demonstrated that one or more cysteine and arginine residues are likely to be involved in catalysis or play an important role in the maintenance of the enzyme structure. The characteristics of the DehA enzyme are compared to those of previously reported haloalcohol dehalogenases and discussed in terms of diversity of this type of dehalogenase.

Alcohols↗

Structure determination and refinement of the Al3+ complex of the D254,256E mutant of Arthrobacter D-xylose isomerase at 2.40 A resolution. Further evidence for inhibitor-induced metal ion movement.

The structure of the D254.256E double mutant of Arthrobacter xylose isomerase with Al3+ at both metal-binding sites was determined by the molecular replacement method at a conventional R-factor of 0.179. Binding of the two Al3+ does not alter the overall structure significantly. However, there are local rearrangements in the octahedral co-ordination sphere of the Al3+. The inhibitor molecule moves somewhat away from the active site. Furthermore, evidence was revealed for metal ion movement from site 2(1) to site 2(2) upon double mutation. Xylose isomerase requires two divalent metal cations for activation. The catalytic metal ion is translocated 1.8 A away from its initial position during the catalytic reaction. The fact that both activating and inactivating metals (including Al3+) were found exclusively at a single location in the double mutant was an indication that the consequently missing shuttle may account for the crippled catalytic efficiency.

Aldose-Ketose Isomerases↗

Hydantoin racemase from Arthrobacter aurescens DSM 3747: heterologous expression, purification and characterization.

In Arthrobacter aurescens DSM 3747 three enzymes are involved in the complete conversion of slowly racemizing 5'-monosubstituted D,L-hydantoins to L-amino acids, a stereoselective hydantoinase, a stereospecific L-N-carbamoylase and a hydantoin racemase. The gene encoding the hydantoin racemase, designated hyuA, was identified upstream of the previously described L-N-carbamoylase gene in the plasmid pAW16 containing genomic DNA of A. aurescens. The gene hyuA which encodes a polypeptide of 25.1 kDa, was expressed in Escherichia coli and the recombinant protein purified to homogeneity and further characterized. The optimal condition for racemase activity were pH 8.5 and 55 degrees C with L-5-benzylhydantoin as substrate. The enzyme was completely inhibited by HgCL2 and iodoacetamide and stimulated by addition of dithiothreitol. No effect on enzyme activity was seen with EDTA. The enzyme showed preference for hydantoins with arylalkyl side chains. Kinetic studies revealed substrate inhibition towards the aliphatic substrate L-5-methylthioethylhydantoin. Enzymatic racemization of D-5-indolylmethylenehydantoin in D2O and NMR analysis showed that the hydrogen at the chiral center of the hydantoin is exchanged against solvent deuterium during the racemization.

Arthrobacter↗

Immobilization of the hydantoin cleaving enzymes from Arthrobacter aurescens DSM 3747.

The immobilization procedure of the two industrially important hydantoin cleaving enzymes--hydantoinase and L-N-carbamoylase from Arthrobacter aurescens DSM 3747--was optimized. Using different methods (carbodiimide, epoxy activated carriers) it was possible to immobilize the crude hydantoinase from A. aurescens DSM 3747 to supports containing primary amino groups with a yield of up to 60%. Immobilization on more hydrophobic supports such as Eupergit C and C 250 L resulted in lower yields of activity, whereas the total protein coupled remained constant. All attempts to immobilize the crude L-N-carbamoylase resulted in only low activity yields. Therefore, the enzyme was highly purified and used in immobilization experiments. The pure enzyme could easily be obtained in large amounts by cultivation of a recombinant Escherichia coli strain following a three step purification protocol consisting of cell disruption, chromatography on Streamline diethylaminoethyl and Mono Q. The immobilization of the L-N-carbamoylase was optimized with respect to the coupling yield by varying the coupling method as well as the concentrations of protein, carrier and carbodiimide. Using 60 mM of water-soluble carbodiimide, nearly 100% of the enzyme activity and protein could be immobilized to EAH Sepharose 4B.

Amidohydrolases↗

Substrate-dependent enantioselectivity of a novel hydantoinase from Arthrobacter aurescens DSM 3745: purification and characterization as new member of cyclic amidases.

A hydantoinase from Arthrobacter aurescens DSM 3745 has been purified to homogeneity with a yield of 77% using a three-step purification procedure. The active enzyme is a tetramer consisting of four identical subunits, each with a molecular mass of 49670 Da as determined by mass spectrometry. The N-terminal amino acid sequence of the enzyme indicates sequence identities to cyclic amidases involved in the nucleotide metabolism as the D-hydantoinase from Agrobacterium radiobacter (53%), the D-selective dihydropyrimidinase from Bacillus stearothermophilus (38%), the allantoinase from Rana catesbeiana (26%), as well as to the catalytic subunit of the urease from Helicobacter pylori (50%). However, all studies based on substrate-dependent growth, induction and catalytic behavior documented the novelty of the bacterial hydantoinase and that its physiological role is not related to any of these enzymes or known metabolic pathways. Its substrate specificity differs from hydantoinases listed in Enzyme Nomenclature and is rather more predominant for the cleavage of aryl- than for alkyl-hydantoin derivatives. It is shown that the stereoselectivity of this enzyme depends on the substrate used for bioconversion: although it is strictly L-selective for the cleavage of D,L-5-indolylmethylhydantoin, it appears to be D-selective for the hydrolysis of D,L-methylthioethylhydantoin. Due to these findings we conclude that this novel bacterial hydantoinase should be classified as a new member of the EC-group 3.5.2 of cyclic amidases.

Amidohydrolases↗