Search PubMed⌕ Search

SEARCH · Search PubMed

Results for “fiber”

Search indexed PubMed citations on genomics, clinical trials, systematic reviews and public health. Explore titles, authors and supplied subject terms, then open the PubMed record.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 253 records · Page 14Linked to original sources
PubMed1982

Axial elastic modulus as a function of relative fiber width in relaxed skinned skeletal muscle fibers.

The axial elastic modulus as a function of relative fiber width was measured in relaxed skinned fiber segments from the semitendinosus muscle of the frog. Fiber width was reduced by adding the non- penetrating long-chain polymer Dextran T500 (Mm = 181,800 D) to the fiber bathing solution. The axial elastic modulus increased steeply as relative fiber width was reduced. This relationship is independent of both ionic strength and of the presence of low molecular weight fractions of dextran within the interfilament space. The observed increase in axial elastic modulus with compression may reflect an interaction between crossbridges and thin filaments, an hypothesis which is corroborated by the similarity of responses obtained from compressed fibers and from width fibers in rigor.

Animals↗
PubMed2003

Fracture resistance of fiber-reinforced vs. non-fiber-reinforced composite molar crowns.

UNLABELLED: This study compared fracture resistance of fiber-reinforced and non-fiber-reinforced composite molar crowns under simulated oral stress conditions. Three groups of fiber-reinforced composite crowns were constructed using one polyethylene fiber (belleGlass/Connect) and two glass fiber reinforcement systems (Sculpture/FiberKor, Targis/Vectris). The non-fiber-reinforced crowns based on the facing material alone: Sculpture, Targis or belleGlass. Additionally, crowns were made of the non-reinforced composite Artglass. Each group consisted of eight crowns. All crowns were luted to human molars and exposed to thermal cycling and mechanical loading (6000 x 5 degrees C/55 degrees C; 1.2 x 10(6x)50 N; 1.66 Hz). The fracture resistance was measured using a Zwick universal testing machine. RESULTS: The non-reinforced Artglass crowns demonstrated the highest fracture resistance, significantly higher than the resistance shown with belleGlass, belleGlass/Connect or Targis. Artglass showed an extremely wide distribution of values, however. No statistically significant differences were found between the reinforced and non-reinforced composite crowns of Vectris/Targis, FiberKor/Sculpture or Connect/belleGlass although the reinforced crowns showed a tendency towards higher values. The fracture resistance values scattered markedly more for the reinforced crowns, and their lowest fracture values also reached the level of the lowest non-reinforced crowns. The small distribution of fracture values for the non-reinforced crowns indicates that they will be less susceptible for manufacturing faults and more reliable under clinical conditions. CONCLUSIONS: RESULTS of this study suggest that single molar composite crowns (tested in this study) do not benefit from fiber-reinforcement.

Analysis of Variance↗
PubMed1986

Fiber type and fiber size changes in selected thigh muscles six months after low thoracic spinal cord transection in adult cats: exercise effects.

The effects of low thoracic spinal cord transection on muscle weights, fiber type compositions and, fiber cross-sectional areas of selected hind limb muscles were studied. Adult cats were spinalized at T12 and maintained for approximately 6 months. Some spinalized cats were exercised on a treadmill 30 min/day, 5 days/week to determine the role of weight support in maintaining the muscle properties. Spinalization resulted in a significant decrease in the weights of most extensors, whereas the flexors or those that act as both flexors and extensors were maintained near control values. All muscles showed a significant increase in the percentage of fast-twitch fibers and decrease in slow oxidative fibers following spinalization. In addition, the predominant fast fiber type in each muscle tended to have the largest decrease in cross-sectional area in the spinalized cats. The atrophic and fiber type adaptations were less pronounced in the exercised cats. In contrast, the relative cross-sectional area of high oxidative fibers generally was similar among the three groups. These results demonstrated that the muscles below the level of the lesion became more "fast-like" histochemically following spinal cord transection, whereas the oxidative properties were relatively unaffected. Further, daily exercise involving weight support appeared to be an important deterrent to these atrophic responses, particularly in the muscles that normally have a postural function (i.e., the slow extensors).

Animals↗
PubMed1994

Acrylic resin-fiber composite--Part I: The effect of fiber concentration on fracture resistance.

This study tested the effect on the fracture resistance of acrylic resin test specimens when different amounts of fibers were incorporated in the resin matrix. The fibers used included glass, carbon, and aramid fibers, with 30 test specimens of each concentration of fibers. Transverse sections of the specimens were studied by scanning electron microscope to establish how the fibers behave in the polymerization process. The results indicated that an increase in the amount of fibers enhanced the fracture resistance of the test specimens (p < 0.001). The SEM micrographs of transverse sections of test polymerized specimens revealed void spaces of different sizes inside the fiber roving.

Analysis of Variance↗
PubMed1986

Response of perifused alveolar macrophages to glass fibers: effect of exposure duration and fiber length.

The effect of glass fibers on rat alveolar macrophages was studied with a new perifusion technique which allows the sequential determination of cell-derived inflammatory mediators as well as estimation of cell viability and aggregation at the end of the incubation period. Our results showed that glass fibers induced dose-dependent release of prostaglandins and beta-glucuronidase from macrophages and the aggregation and death of these cells. These deleterious effects were clearly related to the length of the fibers, with the longer fibers (greater than or equal to 4-5 micron) being more active than the shorter ones (less than 3 micron). Furthermore, a short exposure of 1 hr followed by an 18-hr perifusion induced the same inflammatory and toxic effects on the macrophages as did leaving the fibers undisturbed for the complete 18-hr perifusion. It is concluded that glass fibers produce effects in cultures of rat alveolar macrophages qualitatively similar to those of asbestos, and that fiber length appears to be a critical determinant of toxicity.

Animals↗
PubMed2003

Trace-fiber color discrimination by electrospray ionization mass spectrometry: a tool for the analysis of dyes extracted from submillimeter nylon fibers.

The application of electrospray ionization mass spectrometry (ESI-MS) to trace-fiber color analysis is explored using acidic dyes commonly employed to color nylon-based fibers, as well as extracts from dyed nylon fibers. Qualitative information about constituent dyes and quantitative information about the relative amounts of those dyes present on a single fiber become readily available using this technique. Sample requirements for establishing the color identity of different samples (i.e., comparative trace-fiber analysis) are shown to be submillimeter. Absolute verification of dye mixture identity (beyond the comparison of molecular weights derived from ESI-MS) can be obtained by expanding the technique to include tandem mass spectrometry (ESI-MS/MS). For dyes of unknown origin, the ESI-MS/MS analyses may offer insights into the chemical structure of the compound-information not available from chromatographic techniques alone. This research demonstrates that ESI-MS is viable as a sensitive technique for distinguishing dye constituents extracted from a minute amount of trace-fiber evidence. A protocol is suggested to establish/refute the proposition that two fibers--one of which is available in minute quantity only--are of the same origin.

Journal Article↗
PubMedDate not supplied

Thermoset phenolic matrices reinforced with unmodified and surface-grafted furfuryl alcohol sugar cane bagasse and curaua fibers: properties of fibers and composites.

Composites based on phenolic matrices and unmodified and chemically modified sugar cane bagasse and curaua fibers were prepared. The fibers were oxidized by chlorine dioxide, mainly phenolic syringyl and guaiacyl units of the lignin polymer, followed by grafting furfuryl alcohol (FA), which is a chemical obtained from a renewable source. The fibers were widely characterized by chemical composition analysis, crystallinity, UV-vis diffuse reflectance spectroscopy, SEM, DSC, TG, tensile strength, and 13C CP-MAS NMR. The composites were analyzed by SEM, impact strength, and DMA. The SEM images and DMA results showed that the oxidation of sugar cane bagasse fibers followed by reaction with FA favored the fiber/matrix interaction at the interface. The same chemical modification was less effective for curaua fibers, probably due to its lower lignin content, since the reaction considered touches mainly the lignin moiety. The tensile strength results obtained showed that the fibers were partially degraded by the chemical treatment, decreasing then the impact strength of the composites reinforced with them. In the continuity of the present project, efforts has been addressed to the optimization of fiber surface modification, looking for reagents preferably obtained from renewable resources and for chemical modifications that intensify the fiber/matrix interaction without loss of mechanical properties.

Alcohols↗
PubMed2006

Screening of tropical fruit volatile compounds using solid-phase microextraction (SPME) fibers and internally cooled SPME fiber.

In this study, the optimization and comparison of an internally cooled fiber [cold fiber with polydimethylsiloxane (PDMS) loading] and several commercial solid-phase microextraction (SPME) fibers for the extraction of volatile compounds from tropical fruits were performed. Automated headspace solid-phase microextraction (HS-SPME) using commercial fibers and an internally cooled SPME fiber device coupled to gas chromatography-mass spectrometry (GC-MS) was used to identify the volatile compounds of five tropical fruits. Pulps of yellow passion fruit (Passiflora edulis), cashew (Anacardium occidentale), tamarind (Tamarindus indica L.), acerola (Malphigia glabra L.), and guava (Psidium guajava L.) were sampled. The extraction conditions were optimized using two experimental designs (full factorial design and Doehlert matrix) to analyze the main and secondary effects. The volatile compounds tentatively identified included alcohols, esters, carbonyl compounds, and terpernes. It was found that the cold fiber was the most appropriate fiber for the purpose of extracting volatile compounds from the five fruit pulps studied.

Alcohols↗
PubMed1990

Skeletal muscle fiber type, fiber size, and capillary supply in elite soccer players.

This study determined the fiber type composition, the fiber size, and the capillary characteristics of the vastus lateralis muscle in 11 young, elite, male soccer players and 8 sedentary male, age-matched controls. There were no significant differences (P less than 0.05) in the fiber type percentages and fiber diameter between the soccer players and controls; however, all fiber types tended to be larger in the soccer players. The soccer players possessed a greater capillary supply; this was characterized by a significantly greater mean number of capillaries surrounding each fiber (5.7 +/- 0.9 vs. 4.9 +/- 0.4), a significantly larger capillary density (282.7 +/- 42.0 vs. 220.8 +/- 38.1), and a significantly higher capillary to fiber ratio (2.2 +/- 0.6 vs 1.7 +/- 0.1). The results indicate that soccer may be an appropriate stimulus for simultaneous adaptation to endurance and high intensity exercise.

Adult↗
PubMedDate not supplied

[Improving fiber adhesion by surface oxidation in carbon fiber reinforced bone cement].

The mechanical superiority of carbon fiber reinforced PMMA containing additional apatite was shown previously. For further improvement these carbon fibers were now submitted to a superficial oxidation treatment by HNO3. A closer contact between the carbon fibers and PMMA and even trabeculae-like adhesions were detected by Scanning Electron Microscopy. The fatigue strength of the carbon fiber reinforced bone cement could be increased at 17% by this oxidation treatment. This increase, however, is less than that observed in the case of other fiber reinforced composites. Most likely this is caused by the pronounced polymerisation contraction of PMMA. Further improvement of the adhesion of the fibers to cement may be achieved by different oxidation techniques, further extraction of foreign substances or graft polymerization of the carbon fibers by PMMA or other polymers.

Adhesiveness↗
PubMed1994

Chromatin fibers observed in situ in frozen hydrated sections. Native fiber diameter is not correlated with nucleosome repeat length.

Chromatin fibers have been observed and measured in frozen hydrated sections of three types of cell (chicken erythrocytes and sperm of Patiria miniata and Thyone briareus) representing an approximately 20-bp range of nucleosomal repeat lengths. For sperm of the starfish P. miniata, it was possible to obtain images of chromatin fibers from cells that were swimming in seawater up to the moment of cryo-immobilization, thus providing a record of the native morphology of the chromatin of these cells. Glutaraldehyde fixation produced no significant changes in the ultrastructure or diameter of chromatin fibers, and fiber diameters observed in cryosections were similar to those recorded after low temperature embedding in Lowicryl K11M. Chromatin fiber diameters measured from cryosections of the three types of nuclei were similar, a striking contrast to the situation for chromatin isolated from these cell types, where a strong positive correlation between diameter and nucleosomal repeat length has been established. The demonstration of chromatin fibers in unfixed whole cells establishes an unequivocal baseline for the study of native chromatin and chromosome architecture. The significant differences between chromatin fibers in nucleo and after isolation supports a previous observation (P. J. Giannasca, R. A. Horowitz, and C. L. Woodcock. 1993. J. Cell Sci. 105:551-561), and suggests that structural studies on isolated material should be interpreted with caution until the changes that accompany chromatin isolation are understood.

Animals↗
PubMedDate not supplied

A new method of determining the solute permeability of hollow-fiber dialysis membranes by means of laser lights traveling along optic fibers.

To develop a new method of determining solute permeability more simply and accurately, the authors employed light from a laser traveling along quartz optic fibers. Dialysis experiments at 310 K were made with a single hollow fiber containing aqueous test solutes. A membrane tube was sealed at either end with quartz optic fibers. Helium-neon and helium-cadmium laser lights emitted from one of these optic fibers into the test solution at wavelengths of 543 and 442 nm for vitamin B12 and cytochrome-C, respectively, were caught by the other optic fiber and detected with a silicon photodiode. The solute permeability for cytochrome-C obtained by this method was almost in agreement with that for beta-2-microglobulin by the radioisotope method. This study demonstrates the usefulness of light from a laser traveling along quartz optic fibers in determining the solute permeability of hollow-fiber dialysis membranes.

Cytochrome c Group↗
PubMed1985

Adenovirus 3 fiber polypeptide gene: implications for the structure of the fiber protein.

The nucleotide sequence of a 1,330-base-pair-long DNA segment located between map coordinates 88.5 and 92.3 in the adenovirus type 3 (Ad3) genome was determined. Transcripts from the r-strand of the region were mapped by S1 nuclease analysis and by in vitro translation of RNA, selected by filter hybridization. The results revealed that the sequenced region encodes the Ad3 fiber polypeptide with a molecular weight of 34,800. A comparison between the predicted amino acid sequences of the Ad3 and the Ad2 fiber polypeptides revealed that they have almost identical secondary structures, consisting of a tail, a shaft, and a knob. A striking difference between Ad2 and Ad3 fibers was that the shaft of the Ad3 fiber was significantly shorter, containing only 6 repeat units compared with 22 in the Ad2 fiber. The secondary structure suggests that the fiber is a dimeric structure, as proposed earlier (N.M. Green, N.G. Wrigley, W.C. Russell, S.R. Martin, and A.D. McLachlan, EMBO J. 2:1357-1365, 1983), with the size of the polypeptide determining the length of the fiber protein.

Adenoviridae↗
PubMed2001

Adenovirus type 9 fiber knob binds to the coxsackie B virus-adenovirus receptor (CAR) with lower affinity than fiber knobs of other CAR-binding adenovirus serotypes.

The coxsackie B virus and adenovirus (Ad) receptor (CAR) functions as an attachment receptor for multiple Ad serotypes. Here we show that the Ad serotype 9 (Ad9) fiber knob binds to CAR with much reduced affinity compared to the binding by Ad5 and Ad12 fiber knobs as well as the knob of the long fiber of Ad41 (Ad41L). Substitution of Asp222 in Ad9 fiber knob with a lysine that is conserved in Ad5, Ad12, and Ad41L substantially improved Ad9 fiber knob binding to CAR, while the corresponding substitution in Ad5 (Lys442Asp) significantly reduced Ad5 binding. The presence of an aspartic acid residue in Ad9 therefore accounts, at least in part, for the reduced CAR binding affinity of the Ad9 fiber knob. Site-directed mutagenesis of CAR revealed that CAR residues Leu73 and Lys121 and/or Lys123 are critical contact residues, with Tyr80 and Tyr83 being peripherally involved in the binding interaction with the Ad5, Ad9, Ad12, and Ad41L fiber knobs. The overall affinities and the association and dissociation rate constants for wild-type CAR as well as Tyr80 and Tyr83 CAR mutants differed between the serotypes, indicating that their binding modes, although similar, are not identical.

Adenoviruses, Human↗
PubMed1976

Short-range stiffness of slow fibers and twitch fibers in reptilian muscle.

The semitendinous muscle of the lizard Tilique contains both slow and twitch fibers; by subdivision of its motor nerve, fibers of each type may be stimulated separately. When, during repetitive stimulation of nerve filaments, the muscle was lengthened or shortened, the tension changes included an initial short-range stiffness, followed by a later compliance. With increasing velocities of movement, the short-range stiffness increased toward a limiting value. For slow fibers this limiting value was reached with lower velocities of movement than for the twitch fibers. Provided that the same velocity of movement was used and the movements began from similar initial isometric tensions, the slow fibers resisted the movements with a greater stiffness than the twitch fibers. It is suggested that not all of the observed differences between the two fiber types can be interpreted simply in terms of differences in rates of formation and breakdown of cross-links.

Animals↗
PubMed1994

Glass fiber manufacturing and fiber safety: the producer's perspective.

Historically, the potential health effects of airborne fibers have been associated with the dose, dimension, and durability. Increasing focus is being placed on the latter category. Concern about airborne fiber safety could be reduced by manufacturing fibers that are not respirable; however, due to performance and manufacturing constraints on glasswool insulations, this is not possible today. These products are an important part of today's economy and as a major manufacturer, Owens-Corning is committed to producing and marketing materials that are both safe and effective in their intended use. To this end, manufacturing technology seeks to produce materials that generate low concentrations of airborne fibers, thus minimizing exposure and irritation. The range of fiber diameters is controlled to assure effective product performance and, as far as possible, to minimize respirability. Glass compositions are designed to allow effective fiber forming and ultimate product function. Fiber dissolution is primarily a function of composition; this too, can be controlled within certain constraints. Coupled with these broad parameters is an extensive product stewardship program to assure the safety of these materials. This article will discuss the factors that influence glasswool insulation production, use, and safety.

Air Pollutants↗
PubMed2006

Measuring optical fiber length by use of a short-pulse optical fiber ring laser in a self-injection seeding scheme.

A method for measuring the length of an optical fiber by use of an optical fiber ring laser pulse source is proposed and demonstrated. The key element of the optical fiber ring laser is a gain-switched Fabry-Perot laser diode operated in a self-injection seeding scheme. This method is especially suitable for measuring a medium or long fiber, and a resolution of 0.1 m is experimentally achieved. The measurement is implemented by accurately determining the pulse frequency that can maximize the output power of the fiber ring laser. The measurement results depend only on the refractive index of the fiber corresponding to this single wavelength, instead of the group index of the fiber, which represents a great advantage over both optical time-domain reflectometry and optical low-coherence reflectometry methods.

Journal Article↗
PubMed2003

Highly photosensitive Sb/Er/Ge-codoped silica fiber for writing fiber Bragg gratings with strong high-temperature sustainability.

A highly photosensitive Sb/Er/Ge-codoped silica fiber for fabricating fiber Bragg gratings (FBGs) with strong high-temperature sustainability is presented. The photosensitivity and the high-temperature sustainability of FBGs created in this fiber are examined and compared with those produced in a Sn-doped silica fiber. The results show that the Sb/Er/Ge fiber has a much higher level of photosensitivity than the Sn-doped silica fiber and that the FBGs have a similar high-temperature sustainability of 800 degrees C. The strong fluorescence properties observed from this fiber are also examined.

Journal Article↗