Search PubMed⌕ Search

SEARCH · Search PubMed

Results for “STEAM”

Search indexed PubMed citations on genomics, clinical trials, systematic reviews and public health. Explore titles, authors and supplied subject terms, then open the PubMed record.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 253 records · Page 14Linked to original sources
PubMedDate not supplied

Effects of steam inhalation on nasal patency and nasal symptoms in patients with the common cold.

The effects of steam inhalation on nasal patency and on nasal symptoms were studied in 62 patients with the common cold by a double-blind, randomized, placebo-controlled clinical trial. Treatment consisted of two 20-minute sessions, during which the patient inhaled saturated, hot (42 degrees to 44 degrees C) air through the nose. The subjective response was recorded by each patient during the week following treatment on a daily symptom score card. Nasal patency was determined before treatment, the following day, and 1 week later by measuring peak nasal expiratory and inspiratory air flow. Highly reproducible results were obtained by using these objective methods. Steam inhalation resulted in alleviation of cold symptoms and increased nasal patency in a significantly higher percentage of patients in the actively treated group than in the placebo-treated group. Possible explanations for the effectiveness of treatment are discussed.

Adolescent↗
PubMedDate not supplied

Extraction of hemicellulosic oligosaccharides from spruce using microwave oven or steam treatment.

This paper describes the extraction of hemicellulosic oligosaccharides from spruce, using microwave or steam treatment that can be used for the production of polymers, replacing fossil-based polymers, e.g., hydrogels. The highest yield of oligosaccharides, measured as mannan, was 70% obtained with treatment in the microwave oven at 200 degrees C for 5 min. The amount of oligosaccharides extracted was 12.5 g per 100 g of dry wood. The molecular weights of some selected samples were analyzed using fast protein liquid chromatography and size exclusion chromatography and time-of-flight matrix-assisted laser desorption ionization. Recovered oligosaccharides following steam treatment at 200 degrees C for 2 min had a mean molecular weight of 3400 g/mol with a maximum weight of 12000 g/mol. Higher severity, i.e., increased temperature (>200 degrees C) and residence time, resulted in lower mean molecular weights and yield. Oligosaccharides with higher mean molecular weights were obtained at lower severity, but the yield was considerably lower. The feasibility of using the extracted hemicellulosic oligosaccharides from spruce for the synthesis of hydrogels was demonstrated.

Microwaves↗
PubMedDate not supplied

Influence of enzyme loading and physical parameters on the enzymatic hydrolysis of steam-pretreated softwood.

Softwood is an interesting raw material for the production of fuel ethanol as a result of its high content of hexoses, and it has attracted attention especially in the Northern hemisphere. However, the enzymatic hydrolysis of softwood is not sufficiently efficient for the complete conversion of cellulose to glucose. Since an improvement in the glucose yield is of great importance for the overall economy of the process, the influence of various parameters on the cellulose conversion of steam-pretreated spruce has been investigated. The addition of beta-glucosidase up to 50 IU g(-)(1) cellulose to the enzymatic hydrolysis process resulted in increased cellulose conversion at a cellulase loading up to 48 FPU g(-)(1) cellulose. Despite very high enzyme loading (120 FPU g(-)(1) cellulose) only about 50% of the cellulose in steam-pretreated spruce was converted to glucose when all of the material following pretreatment was used in the hydrolysis step. The influence of temperature, residence time, and pH were investigated for washed pretreated spruce at a dry matter (DM) content of 5% and a cellulase activity of 18.5 FPU g(-)(1) cellulose. The optimal temperature was found to be dependent on both residence time and pH, and the maximum degree of cellulose conversion, 69.2%, was obtained at 38 degrees C and pH 4.9 for a residence time of 144 h. However, when the substrate concentration was changed from 5% to 2% DM, the cellulose conversion increased to 79.7%. An increase from 5% to 10% DM resulted, however, in a similar degree of cellulose conversion, despite a significant increase in the glucose concentration from 23 g L(-)(1) to 45 g L(-)(1). The deactivation of beta-glucosidase increased with increasing residence time and was more pronounced with vigorous agitation.

Aspergillus↗
PubMedDate not supplied

Effect of inhibitors released during steam-explosion treatment of poplar wood on subsequent enzymatic hydrolysis and SSF.

Steam-exploded (SE) poplar wood biomass was hydrolyzed by means of a blend of Celluclast and Novozym cellulase complexes in the presence of the inhibiting compounds produced during the preceding steam-explosion pretreatment process. The SE temperature and time conditions were 214 degrees C and 6 min, resulting in a log R(0) of 4.13. In enzymatic hydrolysis tests at 45 degrees C, the biomass loading in the bioreactor was 100 g(DW)/L (dry weight) and the enzyme-to-biomass ratio 0.06 g/g(DW). The enzyme activities for endo-glucanase, exo-glucanase, and beta-glucosidase were 5.76, 0.55, and 5.98 U/mg, respectively. The inhibiting effects of components released during SE (formic, acetic, and levulinic acids, furfural, 5-hydroxymethyl furfural (5-HMF), syringaldehyde, 4-hydroxy benzaldehyde, and vanillin) were studied at different concentrations in hydrolysis runs performed with rinsed SE biomass as model substrate. Acetic acid (2 g/L), furfural, 5-HMF, syringaldehyde, 4-hydroxybenzaldehyde, and vanillin (0.5 g/L) did not significantly effect the enzyme activity, whereas formic acid (11.5 g/L) inactivated the enzymes and levulinic acid (29.0 g/L) partially affected the cellulase. Synergism and cumulative concentration effects of these compounds were not detected. SSF experiments show that untreated SE biomass during the enzymatic attack gives rise to a nonfermentable hydrolysate, which becomes fermentable when rinsed SE biomass is used. The presence of acetic acid, vanillin, and 5-HMF (0.5 g/L) in SSF of 100 g(DW) /L biomass gave rise to ethanol yields of 84.0%, 73.5%, and 91.0% respectively, with respective lag phases of 42, 39, and 58 h.

Bioreactors↗
PubMed2003

Degradation of volatile hydrocarbons from steam-classified solid waste by a mixture of aromatic hydrocarbon-degrading bacteria.

Steam classification is a process for treatment of solid waste that allows recovery of volatile organic compounds from the waste via steam condensate and off-gases. A mixed culture of aromatic hydrocarbon-degrading bacteria was used to degrade the contaminants in the condensate, which contained approx. 60 hydrocarbons, of which 38 were degraded within 4 d. Many of the hydrocarbons, including styrene, 1,2,4-trimethylbenzene, naphthalene, ethylbenzene, m-/p-xylene, chloroform, 1,3-dichloropropene, were completely or nearly completely degraded within one day, while trichloroethylene and 1,2,3-trichloropropane were degraded more slowly.

Biodegradation, Environmental↗
PubMed1966

The incorporation of [1-14C] acetate into the methyl ketones that occur in steam-distillates of bovine milk fat.

1. The (14)C-labelling of the fatty acids and the methyl ketones in steam-distillates of milk fat from a lactating cow that had been injected intravenously with [1-(14)C]acetate was determined. 2. The labelling patterns of the C(6)-C(16) fatty acids and the corresponding methyl ketones with one fewer carbon atoms were similar, particularly so for the C(5)-C(10) compounds at 9 and 22hr. after the injection of [1-(14)C]acetate. The isolation of (14)C-labelled methyl ketones in the range C(3)-C(15) is evidence that the beta-oxo acid precursors, which are glyceride-bound in the milk fat, are synthesized in the mammary gland from acetate. The absence of heptadecan-2-one in steam-distillates and the extremely low specific radioactivity of stearic acid are further evidence for this biosynthetic pathway. 3. The specific radioactivities of the C(5)-C(15) methyl ketones were higher (with the exception of C(9) methyl ketone in the second milking) than the specific activities of the corresponding fatty acids with one more carbon atom. This is consistent with the methyl ketone precursors' being formed during the biosynthesis of fatty acids rather than being products of beta-oxidation of fatty acids.

Acetates↗
PubMed2003

The effects of treating bovine hide with steam at subatmospheric pressure on bacterial numbers and leather quality.

AIMS: To examine the effect of subatmospheric steam treatment on total viable counts (TVCs) on bovine hide and on the quality of derived leather. METHODS AND RESULTS: Pieces of bovine hide were heated to 75 degrees C (+/-2 degrees C) (n = 3) or 80 degrees C (+/-2 degrees C) (n = 3) for periods of 1, 10 or 20 s by the application of steam at subatmospheric pressure in a laboratory scale apparatus. Treated hide pieces and untreated controls were tanned and the quality of leather was assessed. Treatment at 80 degrees C (T80) reduced the TVC on hide pieces by 2.95 (1 s), 3.33 (10 s) and 3.99 (20 s) log10 CFU cm-2 (P > 0.05). Treatment at 75 degrees C (T75) reduced the TVC on hide pieces by 1.87 (1 s), 2.51 (10 s) and 2.56 (20 s) log10 CFU cm-2 (P > 0.05). The grain on all treated hides was damaged resulting in sueding on derived leather. Sueding was observed on 100% of surfaces from T80-treated samples and on 18 (1 s) to 84% (20 s) of the surfaces of T75 samples. CONCLUSIONS: The magnitude of TVC reductions achieved using T75 and T80 could limit the impact and scale of contamination transfer to the carcass during dehiding. However, because of the sueding observed on derived leather, it is unlikely that either T75 or T80 would be a commercially valid operation during routine slaughter operations. SIGNIFICANCE AND IMPACT OF THE STUDY: Hide decontamination would provide an important critical control point for beef processing, however there are currently no commercially available treatments.

Abattoirs↗
PubMed1993

Use of biological indicators designed for steam or ethylene oxide to monitor a liquid chemical sterilization process.

OBJECTIVE: To determine the ability of a commercially available biological indicator (BI), used to monitor steam and ethylene oxide sterilization, to biologically monitor a liquid sterilization process consisting of a sterile processor, a proprietary peracetic acid sterilant, and a sterile rinse system. DESIGN: Analysis of spore survival in BIs tested in STERIS SYSTEM 1 liquid chemical sterilization processor and in vitro. SETTING: STERIS Corp. research laboratory. METHODS: In vitro tests were performed in the STERIS SYSTEM 1 Processor using 12-minute and 6-minute sterilant exposure cycles. D values (time to inactivate one log of spores), spore washoff and outgrowth time, and inhibitory effects of the sterilant were determined. RESULTS: Sterilization of the spore-inoculated filter paper strips in the BIs was ascertained in both processor testing and in vitro tests using conditions identical to those in the processor. The extensive washing and dilution during the processor cycle resulted in only 0.2% and 1.8% removal of the spores from Bacillus stearothermophilus and Bacillus subtilis inoculated spore strips, respectively. Carryover of the diluted sterilant to the culture medium did not inhibit the outgrowth of the spores, and D values could be obtained. B stearothermophilus was two to three times more resistant to the sterilant than B subtilis. However, either spore meets the performance specifications applicable to BIs for monitoring sterilization processes. CONCLUSIONS: The data demonstrate that the commercial BIs evaluated are reproducible and verifiable indicators of the liquid chemical sterilization process. The same kind of performance specifications for producing BIs used to monitor steam or ethylene oxide systems also apply to the evaluated liquid chemical sterilization system.

Bacillus↗
PubMedDate not supplied

The optimal management of pediatric steam burn from electric rice-cooker: STSG or FTSG?

The steam burn caused by an electric rice-cooker is a unique mode of burn injury in Asian countries, especially Korea and Japan. This type of burn injury is characterized by 1) occurring most frequently on the volar aspect of the hand in toddlers younger than 2 years of age (92.8%); 2) the depth of burns are normally deep second-degree to third-degree (98%) and usually need surgery at the time of injury; 3) flexion contractures of multiple finger joints and web space contracture are common sequelae. We hypothesized that primary full-thickness skin graft (FTSG) would give more reliable results and eliminate the late reconstructive procedures. Between January 1997 and September 1999, 36 patients underwent primary FTSG, and the results of this primary FTSG group were compared with 124 patients who were treated with split-thickness skin graft (STSG; 79/124; 63.7%) or by conservative management (45/124; 36.3%), and readmitted for the correction of hand deformities between September 1995 and September 1999. In the primary FTSG group, 11.1% (4/36) of mild web contractures and 5.5% (2/36) of finger joint contractures were documented, and these did not require the reconstructive procedure during a follow-up period of 8.8 +/- 4.8 months. In 124 patients of the primary STSG or conservative group, the mean time interval to reoperation was 8.9 +/- 4.0 months and all patients received FTSG for correction of late hand deformities. In a retrospective study of the primary STSG group, 42 of 53 patients (79.2%) received reconstructive procedure during a 5-year follow-up period. In this report, we introduce the nature of steam burn caused by electric rice-cooker and propose that primary FTSG may be a reliable method for the treatment of this more severe type of acute burn in pediatric patients.

Burns↗
PubMed1996

Biological indicators for low temperature steam and formaldehyde sterilization: investigation of the effect of change in temperature and formaldehyde concentration on spores of Bacillus stearothermophilus NCIMB 8224.

Five strains of Bacillus stearothermophilus have been studied to identify a spore strain to be used as a biological indicator organism for low temperature steam and formaldehyde sterilization. Three strains gave poor reproducibility of batch size and growth index and were discarded. The other two strains gave good reproducibility with a high growth index and gave rise to linear survivor curves when exposed to 5% aqueous formaldehyde. However, only NCIMB 8224 sporulates on a simpler medium and as it was the most resistant to formaldehyde, it was further studied. Tests were carried out in a modified miniclave and factors studied included temperature of the steam and formaldehyde concentration. All studies confirmed the suitability of this strain as a biological indicator organism.

Data Interpretation, Statistical↗
PubMed1983

Comparative thermoresistance of two biological indicators for monitoring steam autoclaves. I. Comparison performed in a gravity BIER/Steam Vessel.

The thermoresistance of two biological indicators (BIs) for steam sterilization control (Swedish spore tablets and Attest No. 1242 BI) was compared at 121 degrees C and at 134 degrees C, saturated steam, in a special test autoclave (a gravity BIER/Steam Vessel). In this autoclave, three lots of Attest No. 1242 BI (ABI) demonstrated longer survival exposure times than did the three lots of the Scandinavian BI (SBI) tested while the survival-kill range was approx. the same. Also, the ABI had higher D121 degrees C- and D134 degrees C- values based on fraction-negative tests. The D121 degrees C-value of approx, 1.5 min as suggested by the European Pharmacopoeia, was met by both BIs. The larger spore population and the package configuration of the ABI units contribute to the higher thermoresistance of the ABI in the gravity BIER/Steam Vessel.

Geobacillus stearothermophilus↗
PubMed2004

Microbiological evaluation of endodontic files after cleaning and steam sterilization procedures.

BACKGROUND: Infection control procedures are essential for modern dental practice and they are continually evolving to meet the dental profession's high standards. The present study evaluated the efficacy of two cleaning procedures to reduce bacterial numbers on endodontic files, and evaluated the effect of biological debris on the subsequent sterilization of files. METHODS: Stainless steel and nickel-titanium (NiTi) files were examined upon removal from the manufacturer's packaging, after instrumentation in root canals of human teeth inoculated with a broth containing two anaerobic species and one facultative anaerobic species of bacteria, and after instrumentation and cleaning with either an ultrasonic bath or a thermal disinfector. For each file, the bacterial numbers were quantified using routine microbiological techniques in an anaerobic chamber. RESULTS: No bacteria were detected from files direct from their packets. The size, taper and type of file did not affect the ability of either of the cleaning procedures to reduce bacterial numbers. However, an absence of bacteria was more likely when files were cleaned in the thermal disinfector. No bacteria were detected from files that were-subjected to steam sterilization irrespective of the type of prior cleaning procedure. CONCLUSIONS: Steam sterilization eliminated all bacteria from the endodontic files irrespective of the presence of biological debris. The majority of bacteria were eliminated from endodontic files after either ultrasonic cleaning or using a thermal disinfector.

Colony Count, Microbial↗
PubMed1965

DETERMINATION OF STEAM-VOLATILE ORGANIC ACIDS IN FERMENTATION MEDIA BY GAS-LIQUID CHROMATOGRAPHY.

Five gas chromatographic liquid phases (25% Carbowax 20 M plus 4% H(3)PO(4), 17.5% dioctyl sebacate plus 7.5% sebacic acid, 17.5% dioctyl sebacate plus 7.5% docosanoic acid, 5% Tween 80, and 20% LAC-296 [poly (diethylene glycol adipate)] plus 2% H(3)PO(4)) were studied with respect to their utility in the separation and quantitation of steam-volatile organic acids commonly produced in fermentation. Optimal operating conditions and column stability for routine analysis were established. An Aerograph Hy-Fi gas chromatograph was used for all work, except the studies with Tween 80 in which an Aerograph A-90-C was employed. Chromatographic traces are presented of volatile fatty acid analyses with each of the liquid phases. Complete separation of all isomers of the fatty acids from C(2) to C(5) was accomplished by the Carbowax 20 M plus H(3)PO(4), dioctyl sebacate plus sebacic acid, and dioctyl sebacate plus docosanoic acid columns. The latter two liquid phases were extremely unstable and proved to be unsatisfactory for analysis of aqueous samples. A column of Carbowax 20 M + H(3)PO(4) separated steam-volatile organic acids completely. The volatile fatty acid isomers were separated by 5% Tween 80 somewhat less completely, and the peak shapes were not as sharp and symmetrical as that desired for good quantitative work. LAC-296 (20%) plus 2% H(3)PO(4) proved to be the most satisfactory of the liquid phases for routine analysis of deproteinated in vitro rumen fermentation media. The column has been used for routine analysis of rumen fermentation fluid and in vitro rumen incubation fluid. All the organic acids from C(2) to C(5), except isobutyric, could be quantitated with this column. Stability of the column with the aqueous solutions was extremely good. The standard deviation of the analysis of each volatile acid component in a fermentation fluid was less than 0.5 molar per cent. The short-chain organic acids (C(2) to C(5)) were shown to be extremely stable in aqueous solution for as long as 6 months after preparation for gas chromatographic analysis by protein precipitation with metaphosphoric acid-H(2)SO(4) and refrigeration at 4 C in stoppered tubes.

Animals↗
PubMed1961

Disinfection of woollen blankets in steam at subatmospheric pressure.

Blankets may be disinfected in steam at subatmospheric pressures by temperatures below boiling point inside a suitably adapted autoclave chamber. The chamber and its contents are thoroughly evacuated of air so as to allow rapid heat penetration, and steam is admitted to a pressure of 10 in. Hg below atmospheric pressure, which corresponds to a temperature of 89 degrees C. Woollen blankets treated 50 times by this process were undamaged. Vegetative organisms were destroyed but not spores. The method is suitable for large-scale disinfection of blankets and for disinfecting various other articles which would be damaged at higher temperatures.

Disinfection↗
PubMed2005

Comparison of electrode cooling between internal and open irrigation in radiofrequency ablation lesion depth and incidence of thrombus and steam pop.

BACKGROUND: Electrode cooling by circulating fluid within the electrode (closed loop) or open irrigation facilitates radiofrequency (RF) ablation. This study compared lesion parameters between closed loop and open irrigation with the use of a canine model. METHODS AND RESULTS: In 8 anesthetized dogs, the skin over the thigh muscle was incised and raised, forming a cradle superfused with heparinized blood (activated clotting time >350 seconds) at 37 degrees C. A 7F 4-mm closed loop electrode (irrigation 36 mL/min) and 7.5F 3.5-mm open irrigation electrode (irrigation 17 mL/min) were positioned perpendicular to the thigh muscle at 10 g contact weight. RF was applied (n=121) at 20 or 30 W for 60 seconds in low (0.1 m/s) or high (0.5 m/s) pulsatile blood flow. Temperatures were measured in the electrode, electrode-tissue interface, and within the tissue at 3- and 7-mm depths. After each RF, the cradle was emptied to examine the electrode and interface for thrombus. There was no difference between closed loop and open irrigation in impedance, lesion depth, or tissue temperature at 20 or 30 W. Interface temperature and electrode temperature were greater in the closed loop application. Thrombus occurred in 32 of 63 closed loop versus 0 of 58 open irrigation RF applications (P<0.05) with interface temperature > or =80 degrees C in all 32 (electrode temperature <40 degrees C in 1, 40 degrees C to 50 degrees C in 26, and >50 degrees C in 5). With closed loop, interface temperature and thrombus incidence were greater at 30 W and low blood flow. With open irrigation, interface temperature remained low (< or =71 degrees C) with no difference between 20 and 30 W or between low and high blood flow. Steam pop occurred at 20 W in 4 of 35 closed loop and 0 of 30 open irrigation and at 30 W in 15 of 28 closed loop and 4 of 28 open irrigation applications (P<0.05). CONCLUSIONS: Lower interface temperature, thrombus, and steam pop, especially in low blood flow, indicate greater interface cooling with open irrigation.

Animals↗
PubMed2005

Application of sequential aqueous steam treatments to the fractionation of softwood.

The FIRST (Feedstock Impregnation and Rapid Steam Treatment) approach was used in this study to isolate extractives, hemicellulose, lignin, fibers, and cellulosic fines of softwood. With hydrolysis and fermentation of the hemicellulose and cellulosic fines fractions, this approach produces four co-products: extractives, cellulose, lignin, and ethanol. The first unit operation uses aqueous/alcohol to remove and recover the extractive rich fraction. The second unit operation uses steam treatment to destructure the matrix and solubilize a large fraction of the hemicelluloses. The third unit operation uses alkaline delignification to dissolve a lignin fraction. The fourth unit operation uses the refining process to separate fibers from cellulosic fines. The fibers are bleached. The yields of lignin and bleached cellulose were about 20.0 kg and 38.3 kg out of 100 kg initial dry pine, respectively. The recovered hemicelluloses were 23.3 kg (containing 16.1 kg hexoses and 5.0 kg pentoses) and the cellulose fines derived hexoses amounted to 3.4 kg out of 100 kg initial dry pine. When the two liquors containing the hemicellulose sugars and the cellulose fines-derived hexoses were fermented for ethanol production, an ethanol yield of 6.8 kg was obtained.

Cellulose↗
PubMed2000

Steam pretreatment of Douglas-fir wood chips. Can conditions for optimum hemicellulose recovery still provide adequate access for efficient enzymatic hydrolysis?

Douglas-fir sapwood and heartwood were impregnated with SO2 and steam exploded at three severity levels, and the cellulose-rich, water-insoluble component was enzymatically hydrolyzed. The high-severity conditions resulted in near complete solubilization and some degradation of hemicelluloses and a significant improvement in the efficiency of enzymatic digestibility of the cellulose component. At lower severity, some of the hemicellulose remained unhydrolyzed, and the cellulose present in the pretreated solids was not readily hydrolyzed. The medium-severity pretreatment conditions proved to be a good compromise because they improved the enzymatic hydrolyzability of the solids and resulted in the recovery of the majority of hemicellulose in a monomeric form within the water-soluble stream. Sapwood-derived wood chips exhibited a higher susceptibility to both pretreatment and hydrolysis and, on steam explosion, formed smaller particles as compared to heartwood-derived wood chips.

Cellulase↗
PubMed1990

Influence of flake density on the comparative feeding value of steam-flaked corn for feedlot cattle.

Two trials were conducted to examine the influence of flake density (FD) on the feeding value of steam-flaked corn. Treatments consisted of corn that had been steam-flaked to mean densities of .42, .36 and .30 kg/liter (28, 24 and 20 lb/bu). In Trial 1, treatment effects on characteristics of digestion were evaluated using three crossbred steers with cannulas in the rumen and proximal duodenum. In Trial 2, treatment effects on feedlot performance were evaluated in a 112-d finishing trial involving 72 crossbred steers with an average initial weight of 312 kg. Flake density was directly related to flake thickness (P less than .01) and inversely related (P less than .01) to in vitro enzymatic digestibility of starch. Decreasing the FD resulted in a linear decrease (P less than .01) in ruminal pH and linear increases (P less than .05) in postruminal and total tract digestibility of starch. Postruminal digestibility of N and total tract digestibility of OM, N and energy also increased linearly (P less than .05) with decreasing FD. Flake density did not influence (P greater than .10) feedlot performance or carcass merit. There was a tendency (P greater than .10) for depressed rate and efficiency of gain for steers fed the 30 kg/liter FD corn. Improvements in digestibility and N utilization of SF corn-based diets as a result of decreasing FD from .42 to .30 kg/liter did not enhance feedlot performance. This may be due to digestive dysfunction, perhaps related to processing effects on ruminal pH.

Animal Feed↗