Search PubMed⌕ Search

SEARCH · Search PubMed

Results for “XYLAN”

Search indexed PubMed citations on genomics, clinical trials, systematic reviews and public health. Explore titles, authors and supplied subject terms, then open the PubMed record.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 235 records · Page 13Linked to original sources
PubMed2001

A xylosyltransferase that synthesizes beta-(1-->4)-xylans in wheat (Triticum aestivum L.) seedlings.

A particulate preparation from 6-day-old seedlings of wheat (Triticum aestivum L.) was found to contain a xylosyltransferase (XylTase) which incorporated xylose (Xyl) from UDP-xylose into exogenous beta-(1-->4)-xylooligosaccharides with 2-aminopyridine-derivatized reducing end groups. High-performance liquid chromatographic analysis showed that the chain elongation of pyridylaminated beta-(1-->4)-xylotriose (Xyl3-PA) occurred by attachment of a series of one, two, or three xylosyl residues, depending on substrate concentrations and reaction times. Methylation analysis and beta-xylosidase digestion of the newly synthesized Xyl4-PA confirmed that the xylosyl residues were incorporated through beta-(1-->4)-linkages. The enzyme was maximally active at pH 6.8 and 20 degrees C, and required Triton X-100, which enhanced activity 5-fold at a concentration of 0.05-2%. Divalent ions, including Mn2+ and Mg2+, did not affect activity. Enzyme activity increased with increasing polymerization of xylosyl residues of the acceptor substrates: for instance, Xyl5-PA was almost 7 times as efficient as Xyl2-PA. The apparent Michaelis constants of the enzyme for Xyl3-PA and UDP-xylose were 13.5 and 7.9 mM, respectively. The enzyme also catalyzed incorporation of radioactive sugars (Xyl together with a small portion of L-arabinose) from UDP-[14C]xylose into higher beta-(1-->4)-xylooligosaccharides (degree of polymerization > 7) with or without (4-O-methyl-)glucuronosyl side chains at activities comparable to those observed for pyridylaminated xylooligosaccharides, and into several heteroxylans but with much lower efficiency. Enzymatic hydrolysis of the product with a beta-xylanase degraded it into mainly xylobiose, providing further evidence that the xylosyl residues are incorporated through beta-(1-->4)-linkages.

Cell Wall↗
PubMed1993

Mode of action of the xylan-degrading enzymes from Aspergillus awamori on alkali-extractable cereal arabinoxylans.

Alkali-extractable cereal arabinoxylan and oligosaccharides of known structure derived from it by enzymic hydrolysis were treated with endo-(1-->4)-beta-D-xylanases I and III from Aspergillus awamori CMI 142717 and the digests subjected to analysis by high performance anion-exchange chromatography. Clear differences in the mode of action of the two endo-(1-->4)-beta-D-xylanases were observed. When counting from the reducing end, at least one unsubstituted xylopyranosyl residue adjacent to singly substituted xylopyranosyl residues or two unsubstituted xylopyranosyl residues adjacent to doubly substituted xylopyranosyl residues cannot be removed by endo-(1-->4)-beta-D-xylanase I. At least two unsubstituted xylopyranosyl residues adjacent to singly or doubly substituted xylopyranosyl residues cannot be removed by endo-(1-->4)-beta-D-xylanase III. beta-D-Xylosidase from the same xylanolytic system was able to remove terminal xylopyranosyl residues from the nonreducing end of branched oligosaccharides only when two contiguous unsubstituted xylopyranosyl residues were present adjacent to singly or doubly substituted xylopyranosyl residues.

Alkalies↗
PubMed1995

D-xylan-degrading enzyme system from the fungus Phanerochaete chrysosporium: isolation and partial characterisation of an alpha-(4-O-methyl)-D-glucuronidase.

A number of fungi were screened for their capacities to produce extracellular alpha-(4-O-methyl)-D-glucuronidase. Of those tested, Phanerochaete chrysosporium ATCC 24725 produced the enzyme in greatest yield. The single alpha-(4-O-methyl)-D-glucuronidase produced by this fungus was purified by a series of chromatographic methods involving anion exchange, hydrophobic interaction and chromatofocusing. Isolated in this way, the enzyme had an apparent molecular mass of 112 kDa in sodium dodecyl sulphate polyacrylamide gels, and a pI of 4.6 when determined by isoelectric focusing in polyacrylamide gels. The enzyme was optimally active at pH 3.5, but showed significant activity over the pH range 3-5. In the absence of substrate the enzyme was inactivated at pH 3.5 in 2 h at 50 degree C: at pH 5.0 it retained 42% of its activity for 24 h at this temperature. The enzyme showed little activity on glucuronoxylan polysaccharides, but some short-chain xylo-oligosaccharides which were substituted with alpha-linked 4-O-methyl-D-glucopyranosyl uronic acid attached to the 2-position of the non-reducing D-xylopyranosyl residue were readily hydrolysed. There were marked synergistic effects apparent in the release of 4-O-methyl-D-glucopyranosyl uronic acid from various glucuronoxylans when the alpha-(4-O-methyl)-D-glucuronidase was acting in concert with endo-(1-->4)-beta-D-xylanase, and with beta-D-xylosidase and/or an alpha-L-arabinofuranosidase.

Basidiomycota↗
PubMedDate not supplied

Helicoidal pattern in secondary cell walls and possible role of xylans in their construction.

The helicoidal organization of secondary cell walls is overviewed from several examples. Both the plywood texture and the occurrence of characteristic defects strongly suggest that the wall ordering is relevant of a cholesteric liquid-crystal assembly that is rapidly and strongly consolidated by lignification. A preferential localization of glucuronoxylans, major matrix components, and in vitro re-association experiments emphasize their preeminent role: (1) during the construction of the composite as directing the cellulose microfibrils in a helicoidal array; (2) during the lignification of the composite as a host structure for lignin precursors.

Cell Wall↗
PubMed2006

Synthesis and characterization of xylan-coated magnetite microparticles.

This work evaluates an experimental set-up to coat superparamagnetic particles in order to protect them from gastric dissolution. First, magnetic particles were produced by coprecipitation of iron salts in alkaline medium. Afterwards, an emulsification/cross-linking reaction was carried out in order to produce magnetic polymeric particles. The sample characterization was performed by X-ray powder diffraction, laser scattering particle size analysis, optical microscopy, thermogravimetric analysis and vibrating sample magnetometry. In vitro dissolution tests at gastric pH were evaluated for both magnetic particles and magnetic polymeric particles. The characterization data have demonstrated the feasibility of the presented method to coat, and protect magnetite particles from gastric dissolution. Such systems may be very promising for oral administration.

Administration, Oral↗
PubMed2001

Isolation and NMR characterisation of a (4-O-methyl-D-glucurono)-D-xylan from sugar beet pulp.

Stable aqueous suspensions of purified and homogenised sugar beet pulp (SBP) cellulose were subjected to various TFA treatments which induced a flocculation of the suspension and the release of a number of polysaccharides. Among these, a 4-O-methyl glucuronoxylan was isolated and characterized by 1H and 13C NMR spectroscopy. In this polysaccharide the molar proportions of D-Xyl and 4-O-Me-D-GlcA were found to be 7:1. The presence of a glucuronoxylan at the surface of the cellulose microfibrils is very likely involved in the stability of the suspensions. To our knowledge, the presence of a 4-O-methyl-glucuronoxylan in the sugar beet cells has not been described previously.

Cellulose↗
PubMed2003

Structure of a highly substituted beta-xylan of the gum exudate of the palm Livistona chinensis (Chinese fan).

Structural features of the acidic, highly substituted glycanoxylan (LCP; 87% yield) from the gum exudate of the palm, Livistona chinensis, family Arecaceae, were determined. It had [alpha]D -30 degrees, Mw 1.9x10(5) and a polydispersity ratio Mw/Mn of approximately 1.0. Acid hydrolysis gave rise to Rha, Fuc, Ara, Xyl, and Gal, in a 1:6:46:44:3 molar ratio, and 12% of uronic acid was present. LCP had a highly branched structure with side-chains containing nonreducing end-units (% values are approximate) of Araf (15%), Fucp (4%), Xylp (7%), GlcpA, and 4-Me-GlcpA, and internal 2-O- (5%) and 3-O-substituted Araf (8%), and 2-O-substituted Xylp (14%) units. The (1-->4)-linked beta-Xylp main-chain units of LCP were substituted at O-3 (4%), O-2 (17%), and O-2,3 (16%). Partial acid hydrolysis gave 4-Me-alpha-GlcpA-(1-->2)-[beta-Xylp-(1-->4)](0-2)-Xyl, identified by showing that the uronic acids were single-unit side-chain substituents on O-2. Milder hydrolysis conditions removed from O-3 other side-chains containing Fucp and Araf nonreducing end-units and internal Arap, and 2-O- and 3-O-substituted Araf units. Carboxyl-reduced LCP contained 4-O-methylglucose and glucose in a 3.2:1 molar ratio, arising from GlcpA and 4-OMe-GlcpA nonreducing end-units, respectively. The gum contained small amounts of free alpha-Fucp-(1-->2)-Ara, which corresponds to structures in the polysaccharide. Free myo- and D- or L-chiro-inositol were present in a 9:1 ratio.

Arabinose↗
PubMed1997

Oligosaccharides obtained by enzymatic hydrolysis of birch kraft pulp xylan: analysis by capillary zone electrophoresis and mass spectrometry.

Neutral and acidic oligosaccharides were obtained from an unbleached birch kraft pulp by treatment with a Trichoderma reesei endoxylanase pI 9 and subsequently characterized using capillary zone electrophoresis (CZE) and matrix assisted laser desorption ionization time of flight mass spectrometry (MALDI-TOF-MS). The borate complexes of unsaturated acidic oligosaccharides having a 4-deoxy-beta-L-threo-hex-4-enopyranosyluronic acid (4 delta UA) residue linked to a beta-D-(1-->4)-xylooligosaccharide backbone were separated by CZE and detected by their UV absorption at 232 nm without prior derivatization. Pre-column derivatization with the chromophore 6-aminoquinoline (6-AQ) followed by CZE in alkaline borate buffer using detection based on absorption at 245 nm was used in the case of neutral xylosaccharides. Furthermore, MALDI-TOF-MS was employed to determine the molecular masses of both unsaturated and saturated acidic oligosaccharides. The acidic oligosaccharides released upon endoxylanase treatment of the birch kraft pulp were a (4 delta UA)-beta-D-xylotetraose, a (4 delta UA)-beta-D-xylopentaose, a (4-O-methyl-alpha-D-glucurono)-beta-D-xylotetraose, and a (4-O-methyl-alpha-D-glucurono)-beta-D-xylopentaose. Analysis after enzymatic hydrolysis with beta-xylosidase and alpha-glucuronidase from Trichoderma reesei strongly indicated that the uronic acid residue in these acidic oligosaccharides was linked to the D-xylose unit adjacent to the non-reducing D-xylose unit. The neutral xylosaccharides obtained after endoxylanase treatment of the pulp sample were D-xylose, beta-(1-4)-D-xylobiose and beta-(1-4)-D-xylotriose.

Carbohydrate Sequence↗
PubMed1998

Improved synthesis of an aldobiouronic acid related to hardwood xylans, and preparation of a derivative thereof suitable for linking to proteins.

Treatment of 1,3,4-tri-O-acetyl-alpha-D-xylopyranose with methyl 2,3-di-O-benzyl-l-chloro-l-deoxy-4-O-methyl-alpha, beta-D-glucopyranuronate in the presence of silver trifluoromethanesulfonate was highly stereoselective to give the alpha-linked aldobiouronic acid derivative (4) in 86% yield, after hydrogenolysis of the crude product of the coupling and chromatography. Compound 4 was acetylated and the fully protected substance was converted to the corresponding glycosyl chloride. Reaction of the latter with p-nitrophenol under phase-transfer catalysis afforded, after deacetylation, p-nitrophenyl 2-O-(methyl 4-O-methyl-alpha-D-glucopyranosyluronate)-beta-D-xylopyranoside.

Glycoproteins↗
PubMed1999

CreA modulates the XlnR-induced expression on xylose of Aspergillus niger genes involved in xylan degradation.

The expression of the feruloyl esterase gene faeA, the alpha-glucuronidase gene aguA, the endoxylanase gene xlnB, and the beta-xylosidase gene xlnD from Aspergillus niger on xylose was studied in a wild-type strain and in a CreA mutant. A decrease in expression of all four genes was observed with increasing xylose concentrations in the wild-type strain, whereas expression levels in the CreA mutant were not influenced. The results in the wild type indicated that xylose concentrations higher than 1 mM resulted in repression of the expression of the xylanolytic genes tested mediated by the carbon catabolite repressor protein CreA. On xylose, the expression levels of the xylanolytic genes were therefore not only determined by induction via XlnR, but also by repression via CreA. The genes tested were not influenced to the same extent by XlnR or CreA, resulting in specific expression levels and patterns for each individual gene.

Aspergillus nidulans↗
PubMedDate not supplied

Material properties of plasticized hardwood xylans for potential application as oxygen barrier films.

Free films based on glucuronoxylan isolated from aspen wood were prepared by casting from aqueous solutions and drying in a controlled environment. Addition of xylitol or sorbitol facilitated film formation and thus examination of the material properties of these films. The mechanical properties of the films were evaluated using tensile testing and dynamic mechanical analysis in a controlled ambient relative humidity. The strain at break increased, and the stress at break and Young's modulus of the films decreased with increasing amounts of xylitol and sorbitol due to plasticization. At high amount of plasticizer, it was found that films with xylitol gave lower extensibility. Wide-angle X-ray scattering analysis showed that xylitol crystallized in a distinct phase, which we believe contributes to the more brittle behavior of these films. The effect of the plasticizers on the glass transition temperature was determined using dynamic mechanical analysis and differential scanning calorimetry. An increased amount of plasticizer shifted the glass transition to lower temperatures. The effect of moisture on the properties of plasticized films was investigated using water vapor sorption isotherms and by humidity scans in dynamic mechanical analysis. Sorption isotherms showed a transition from type II to type III when adding plasticizer. The films showed low oxygen permeability and thus have a potential application in food packaging.

Biocompatible Materials↗