Search PubMed⌕ Search

SEARCH · Search PubMed

Results for “STEAM”

Search indexed PubMed citations on genomics, clinical trials, systematic reviews and public health. Explore titles, authors and supplied subject terms, then open the PubMed record.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 235 records · Page 13Linked to original sources
PubMedDate not supplied

Chemical analysis of smoke of Indian cigarettes, bidis and other indigenous forms of smoking--levels of steam-volatile phenol, hydrogen cyanide and benzo(a)pyrene.

Levels of steam-volatile phenol, hydrogen cyanide and benzo(a)pyrene in various types of tobacco smoking products marketed in the country have been determined for the first time. Steam-volatile phenol levels in six popular brands of Indian cigarettes varied from 118 to 226 micrograms, and in six popular brands of bidis, from 129 to 273 micrograms. Cheroot and cigarillos yielded 400 micrograms and 333 micrograms steam-volatile phenol respectively. The hydrogen cyanide levels in the mainstream smoke of five popular brands of Indian cigarettes varied from 366 to 638 micrograms and in the mainstream smoke of four popular brands of bidis from 688 to 904 micrograms. Cheroot and cigarillos yielded 588 micrograms and 1119 micrograms hydrogen cyanide respectively. The values of benzo(a)pyrene content in Indian cigarettes varied from 85 to 114 ng and in bidis from 108 to 144 ng. Herbal bidi and cheroot had 1315 ng and 2519 ng benzo(a)pyrene respectively. Cigarettes were smoked as per international standard smoking conditions and the levels of noxious agent were found to be higher than in currently marketed western cigarettes. However, these levels in all the indigenous products including bidis cannot be directly compared with those of cigarettes as they were smoked under modified conditions.

Benzo(a)pyrene↗
PubMed1995

Steam sterilization of laparoscopic instruments.

Because of the intricate internal parts of laparoscopic instruments, questions have been raised about the efficacy of cleaning and sterilization techniques. To assess these risks, hamburger meat was inoculated with high concentrations of vegetative pathogens and packed into laparoscopic cannulas. All openings of the cannulas were sealed during steam sterilization cycles ranging from 3 to 10 min in different experiments; cultures were obtained after cooling. Experiments were then performed using heat-resistant spore forms. Our studies showed that both the standard 10-min cycle and the 3-min "flash" were uniformly successful in killing all pathogenic microorganisms. A 7-min steam sterilization was necessary to kill spores within sealed cannulas. We conclude that a standard 10-min cycle within the steam autoclave provides complete sterilization of laparoscopic instruments; the 3-min "flash" sterilization is appropriate and safe for instruments that have been inadvertently contaminated or dropped during a surgical procedure.

Equipment Contamination↗
PubMedDate not supplied

On-line steam distillation/purge and trap analysis of halogenated, nonpolar, volatile contaminants in foods.

An on-line, steam distillation/purge and trap gas chromatographic procedure is described for determination of halogenated analytes in foods and beverages. Recoveries were generally >80% (versus aqueous standards) from vegetable oil, flour, root beer, cream (10% butter fat), and milk spiked at 1-3 micrograms/kg for each of the 32 analytes studied. Analytes ranged in volatility from vinyl chloride to 1,2,3,4-tetrachlorobenzene. Repeatabilities from aqueous standards were <10% for most analytes. For a 1 g food sample, method detection limits ranged from 0.02 to 0.2 micrograms/kg for the 32 analytes. Reduced recoveries for less volatile analytes, however, occurred when steam-distillable, nonpolar food components were carried to the sparger. This effect was observed for citrus beverages containing steam-volatile limonene, roasted and ground coffees, and some salad dressings. The method was applied to a variety of foods.

Chromatography, Gas↗
PubMedDate not supplied

Effect of steam-heat treatment with/without divalent cations on the inactivation of lipopolysaccharides from several bacterial species.

The inactivation of endotoxin from six species of smooth gram-negative bacteria (S-form) by steam-heat treatment was investigated using the Limulus amebocyte lysate (LAL) assay. Biphasic decreases of endotoxins from four species of bacteria were observed upon steam-heat treatment of 1 microgram/ml endotoxin solution at 121 degrees C in a steam sterilizer. A lag time, however, was observed in the inactivation profiles of V. cholerae and P. aeruginosa. Distinct differences in heat resistance were observed among the bacterial species. The decrease rate was found to be concentration-dependent, and endotoxins at low concentrations (less than 10 ng/ml) were inactivated by the treatment to below the detection limit of the LAL assay. The time-course of the decrease of endotoxin from rough strains (R-form) resembled that of the respective S-form. The inactivation of R-form, especially Rc mutant, endotoxin was markedly affected by divalent cations such as Mg2+ and Ca2+, which appear to promote reaggregation of the endotoxin.

Calcium Chloride↗
PubMedDate not supplied

Determination of salicylic acid in plasma by gas chromatography using steam as carrier gas.

A gas chromatography method using steam as the carrier gas was established for the determination of salicylic acid in plasma. A 0.5 mL plasma sample was mixed with 0.5 mL of 6N HCl and then extracted with 2 mL of dichloromethane. The dichloromethane was evaporated to dryness and the residue was redissolved in 0.5 mL of water and then analysed by gas chromatography using steam as the carrying gas. The result was calculated by external standardization.

Chromatography, Gas↗
PubMed2003

Microwave-assisted steam distillation with simultaneous liquid/liquid extraction of pentachlorophenol from organic wastes and soils.

An efficient method for extracting pentachlorophenol (PCP) from organic solid matrices and soils using direct excitation of the fresh samples by microwave energy is presented. Steam-volatile PCP partitioned into the organic solvent n-hexane within the closed extraction vessel, resulting in recovery rates of 85-92% from aged samples. Condensed water provided a boundary layer between extract and sample thus preventing any contact of PCP with and re-partitioning into the sample. Duration of the microwave-assisted process was 35 min. Crude extracts were derivatized by heptafluorobutyric anhydride (HFBA) to improve selectivity and sensitivity resulting in detection limits of 1-2 micro g kg(-1). GC-MS/MS analyses proved that suitable extracts with only minor impurities were obtained. Common sample treatment steps like drying, thorough grinding, frequent transferring, and tedious clean-up, and concentration procedures which all can cause certain losses of analyte were minimized. The efficiency of the method was verified by comparison with an established ultrasonic extraction procedure. This microwave-assisted pressurized steam distillation with simultaneous partition into an organic phase thus provides a streamlined and efficient strategy which requires no additional investment in standard equipment for microwave-assisted extractions (MAE). Degradation of analytes at longer extraction times must be taken into account.

Chemical Fractionation↗
PubMed2004

Superheated water extraction, steam distillation and Soxhlet extraction of essential oils of Origanum onites.

Superheated water extraction (SWE) at various temperatures (100, 125, 150 and 175 degrees C), steam distillation, and Soxhlet extraction were compared in the extraction of essential oils from two samples of the plant Origanum onites, one cultivated, the other wild. C18 solid-phase extraction was used to elute the essential oils from the SWE aqueous extract. The compositions of the extracted essential oils obtained from all three methods were then characterized by comprehensive GCxGC/time-of-flight mass spectrometry (TOF/MS). The highest essential oil yields were obtained by using SWE at 150 degrees C with a flow rate of 2 mL min(-1) and a pressure of 60 bar for 30 min: these were 3.76 and 4.11% for wild and cultivated O. onites samples, respectively, expressed as a percentage of 100 g of dry (leaf) matter. The yields obtained using SWE at 150 degrees C were slightly higher than those from conventional methods. Steam distillation was performed for 3 h, and Soxhlet extraction was completed in 12 h. The major compounds found were borneol, terpinen-4-ol and carvacrol.

Chromatography, Gas↗
PubMed1991

Dimensional stability of a polyvinylsiloxane impression material following ethylene oxide and steam autoclave sterilization.

Polyvinlsiloxane impressions were made from a stainless steel master die machined to stimulate five full veneer crown preparations symmetrically placed in an arch form. Three groups of 10 impressions each were made. Treatment groups were sterilized using an ethylene oxide gas and a conventional steam autoclave. Casts were poured and intrapreparation, height, and diameter measurements were made using a stereomicroscope, a digital electronic caliper, and a 1-inch travel dial indicator. Analysis of dimensional changes for the two groups showed that casts made from impressions sterilized by ethylene oxide are acceptable for use in the construction of fixed or removable prostheses. Casts made from impressions sterilized in a steam autoclave can be used for the fabrication of diagnostic casts and some transitional prostheses, but not for routine construction of crowns or fixed partial dentures.

Analysis of Variance↗
PubMed1995

Steam explosion of woody hemp chènevotte.

This paper concerns the morphology of hemp woody core cells, investigated by optical and scanning electron microscopy, and the chemical analysis of the hemp cells. Steam explosion was investigated as a pre-treatment step for woody hemp 'chènevotte', with the aim of optimizing the separation and delignification of woody fibres. In this study, we report the results of five experiments performed on 'chènevotte' samples impregnated in acid solution (0.1% w/w H2SO4) and steamed at 200, 210, 220, 230 and 240 degrees C for 180 s. The effect of process temperatures on the woody hemp core after acidic impregnation was followed by optical and scanning electron microscopy, by assessment of the chemical composition, and by evolution of the average degree of polymerization (DPv) values of the purified wood fibres. We found that treatment at 200 and 210 degrees C led to samples that were difficult to delignigy because the destructuring and disintegration of lignocellulosic materials were insufficient. A temperature of the order of 220-230 degrees C is required to obtain well-separated fibres. However, at a temperature of 240 degrees C, degradation and fibre damage were noted.

Carbohydrates↗
PubMed1986

Residual formaldehyde in steam-formaldehyde sterilized materials.

The amounts of residual formaldehyde and paraformaldehyde present in polymeric materials after steam-formaldehyde sterilization in a commercial sterilizer were determined. Appreciable amounts of residue were detected in ethylene-vinyl alcohol copolymer (EVOH), polyamide-6 (PA-6) and natural rubber (NR). These polymers all have a relatively low contact angle with water which indicated that the wettability of a material is an important parameter in determining amount of residue. The residue present in EVOH and in PA-6,6 filter material appeared to be toxic in the HFL-test (a screening test for acute toxicity). This indicated that a more thorough investigation into the possible toxicological consequences of the use of some steam-formaldehyde sterilized materials is necessary.

Biocompatible Materials↗
PubMed2005

Steam sterilization and automatic dispensing of [18F]fludeoxyglucose (FDG) for injection.

UNLABELLED: For the purpose of implementing steam sterilization of 2-[18F]FDG (FDG) in the final container into routine production, we have validated and established a fully automated dispensing and sterilization system, thereby considerably reducing the radiation burden to the personnel. METHODS: The commercially available system combines aseptic dispensing of the product solution under a miniaturized laminar flow unit with subsequent steam sterilization, realized by heating of the product in the final containers by an autoclave included in the dispensing unit, thus incorporating current pharmaceutical manufacturing standards for the production of parental radiopharmaceuticals. The efficiency of the used sterilization cycle, the stability of FDG under the conditions of sterilization and the stability of the final product towards radiolysis was investigated with respect to various pH-formulations. RESULTS: The system was found to be fully valid for filling of vials in a laminar flow class A (US-class 100) environment and for sterilization of FDG in the final container. The pH for sterilizing FDG solutions must be slightly acidic to avoid decomposition. A pH of 5.5 appears to be optimal and gives FDG of very high radiochemical purity (approximately 99%). In addition, radiolysis of FDG in solutions of high activity concentration was significantly lower at pH 5.5 than at neutral pH. CONCLUSION: Terminal sterilization enables the production of FDG in full compliance with GMP-regulations even in Class C or D (US class 10,000 or 100,000) laboratories.

Fluorodeoxyglucose F18↗
PubMed2005

Superheated steam pyrolysis of biomass elemental components and Sugi (Japanese cedar) for fuels and chemicals.

To develop a novel noncatalytic biomass refinery process that can be used as a portable process, superheated steam pyrolysis was investigated to produce both carbonized solid fuels and chemicals using a large-scale reactor. Individual biomass components and native biomass (Sugi, Japanese cedar) were pyrolyzed. Between 150 and 400 degrees C, the vaporizing fractions of cellulose, xylan, and kraft lignin were summarized using a numerical model. Cellulose was converted to glycolaldehyde, furfural, 5-hydroxymethyl furfural and levoglucosan, whereas xylan was converted to glycolaldehyde, furfural, and acetic acid. Kraft lignin produced a slight yield of phenol and guaiacol. The total vaporization fraction of Sugi and its vaporizing rate were explained sufficiently using a numerical model based on the weighted average of the vaporizing properties of the individual components. However, the yields of phenol, guaiacol, and acetic acid were underestimated, while the yields of furfurals and levoglucosan were overestimated. Possible synergetic effects among chemicals in the superheated steam pyrolysis of native biomass were also discussed.

Biomass↗
PubMed2006

Separation of phenols and furfural by pervaporation and reverse osmosis membranes from biomass--superheated steam pyrolysis-derived aqueous solution.

The separation of valuable chemicals from raw products, where a great number of chemicals coexist, is the key technology in biomass refinery. In this study, the applicability of membrane separation of valuable chemicals from our currently developed portable superheated steam (SHS) biomass pyrolysis process was demonstrated. Phenols (phenol, p-cresol, guaiacol, methyl guaiacol, and ethyl guaiacol), furfural, and acetone were successfully separated by pervaporation using the silicone rubber membrane from model solutions and an actual SHS derived aqueous solution. The solution was also concentrated effectively by reverse osmosis separation using a polyamide membrane. When a high concentration of SHS solution was fed to the pervaporation process, a phase-separated permeate was obtained, which indicated that the reverse osmosis concentration combined with pervaporation separation is useful for the superheated steam process.

Acetone↗
PubMed2006

Solid-phase extraction-gas chromatography and solid-phase extraction-gas chromatography-mass spectrometry determination of corrosion inhibiting long-chain primary alkyl amines in chemical treatment of boiler water in water-steam systems of power plants.

Gas chromatography with simultaneous flame-ionization detection (FID) and a nitrogen-phosphorus detection (NPD) as well as gas chromatography-mass spectrometry (GC/MS) has been used to characterize long-chain primary alkyl amines after derivatization with trifluoroacetic anhydride (TFAA). Electron impact ionization- (EI) and negative chemical ionization (NCI) mass spectra of trifluoroacetylated derivatives of the identified tert-octadecylamines are presented for the first time. The corrosion inhibiting alkyl amines were applied in a water-steam circuit of energy systems in the power industry. Solid-phase extraction (SPE) with octadecyl bonded silica (C18) sorbents followed by gas chromatography were used for quantification of the investigated tert-octadecylamines in boiler water, superheated steam and condensate samples from the power plant. The estimated values were: 89 microg l(-1)(n = 5, RSD = 7.8%), 45 microg l(-1) (n = 5, RSD = 5.4%) and 37 microg l(-1)(n = 5, RSD = 2.3%), respectively.

Amines↗
PubMed2005

Steam stripping of the unsaturated zone of contaminated sub-soils: the effect of diffusion/dispersion in the start-up phase.

The unsteady process of steam stripping of the unsaturated zone of soils contaminated with volatile organic compounds (VOCs) is addressed. A model is presented. It accounts for the effects of water and contaminants remaining in vapour phase, as well as diffusion and dispersion of contaminants in this phase. The model has two components. The first is a one-dimensional description of the propagation of a steam front in the start-up phase. This is based on Darcy's law and conservation laws of mass and energy. The second component describes the transport of volatile contaminants. Taking the view that non-equilibrium between liquid and vapour phases exists, it accounts for evaporation, transport, and condensation at the front. This leads to a moving-boundary problem. The moving-boundary problem is brought into a fixed domain by a suitable transformation of the governing partial differential equations, and solved numerically. For a broad range of the governing dimensionless numbers, such as the Henry, Merkel and Péclet numbers, computational results are discussed. A mathematical asymptotic analysis supports this discussion. The range of parameter values for which the model is valid is investigated. Diffusion and dispersion are shown to be of qualitative importance, but to have little quantitative effect in the start-up phase.

Diffusion↗
PubMed2006

Preparation of steam activated carbon from rubberwood sawdust (Hevea brasiliensis) and its adsorption kinetics.

Activated carbon was produced from a biowaste product, rubberwood sawdust (RWSD) using steam in a high temperature fluidized bed reactor. Experiments were carried out to investigate the influence of various process parameters such as activation time, activation temperature, particle size and fluidising velocity on the quality of the activated carbon. The activated carbon was characterized based on its iodine number, methylene blue number, Brauner Emmet Teller (BET) surface area and surface area obtained using the ethylene glycol mono ethyl ether (EGME) retention method. The best quality activated carbon was obtained at an activation time and temperature of 1h and 750 degrees C for an average particle size of 0.46 mm. The adsorption kinetics shows that pseudo-second-order rate fitted the adsorption kinetics better than pseudo-first-order rate equation. The adsorption capacity of carbon produced from RWSD was found to be 1250 mg g(-1) for the Bismark Brown dye. The rate constant and diffusion coefficient for intraparticle transport were determined for steam activated carbon. The characteristic of the prepared activated carbon was found comparable to the commercial activated carbon.

Adsorption↗
PubMed2002

Suppressed ion chromatography for monitoring chemical impurities in steam for geothermal power plants.

A suppressed ion chromatography (IC) technique has been evaluated as a chemical monitoring tool for detecting major anions (F-, Cl-, NO3- and SO4(2-)) of condensed steam in geothermal power plants. It is shown that the suppressed IC technique provides a suitable means for preventing possible damage to generating equipment in the geothermal industry. An electrical conductivity detector (0.1 microS sensitivity) with an anion-exchange column (IonPac AS4A-SC), a micro-membrane suppressor (AMMS II), and an isocratic high-pressure pump system were successfully used for detecting low concentrations of inorganic anions. Method detection limits for the anions of interest were <0.184 mg/L. Details of the IC methodology as well as some experimental results obtained during its application for the chemical monitoring of geothermal steam pipes are also described.

Chromatography, Ion Exchange↗
PubMed1989

The effects of steam sterilization and usage on cutting efficiency of endodontic instruments.

The effects of steam sterilization and usage on sharpness were evaluated on #25 endodontic files. Files were used to instrument 1, 5, and 10 molars. Control groups determined the effect of steam sterilization alone on cutting efficiency of unused files. A cutting efficiency test was performed on an apparatus that compares sharpness of files when used in linear motion. Scanning electron microscopic analysis was performed in each group. Significant differences were found between experimental files used to instrument 1 molar and those used for 5 or 10 molars. The difference in cutting efficiency between the second and third experimental groups was not significant, indicating that most of the decrease in sharpness occurred with use between one and five molars. No significant difference was found between the control groups, indicating no decrease in cutting efficiency by sterilization alone. The scanning electron microscopic analysis supported the statistical data.

Dental Instruments↗