Search PubMed⌕ Search

SEARCH · Search PubMed

Results for “additive”

Search indexed PubMed citations on genomics, clinical trials, systematic reviews and public health. Explore titles, authors and supplied subject terms, then open the PubMed record.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 217 records · Page 12Linked to original sources
PubMed1999

Polyethylene oxide additive-entrapped polyvinyl chloride as a new blood bag material.

Until now, most widely used blood bag material has been a plasticized polyvinyl chloride (PVC) because it has many desirable properties as a blood bag material. One of main concerns of using plasticized PVC as a blood bag material is the toxicity of the plasticizers that are leached out of the material. We tried to solve this problem by the addition of polyethylene oxide (PEO)-containing amphiphilic block copolymers as additives in the PVC. The PEO additives may play two roles: they can act as nontoxic plasticizers to PVC, and they can also act as blood-compatible surface modifiers. In this study, PEO additive-entrapped PVC films were prepared by the addition (up to 30 wt%) of PEO-alkyl carbon block copolymers or PEO-polypropylene oxide (PPO)-PEO triblock copolymers with different PEO chain lengths in the PVC. The prepared PEO additive-containing PVC films were characterized by the measurements of water contact angle, Fourier transform IR spectroscopy in the attenuated total reflectance mode, mechanical properties (tensile strength and elongation at break), water absorption, and stability of the PEO additives entrapped in the films. It was observed that the PEO additive-entrapped PVC films were flexible and transparent. It seems that the PEO additives are surface active, resulting in the considerable change of surface characteristics without a significant change of the mechanical properties of the films compared to the control PVC without any additives or a commercial blood bag. The adhesion of platelets on the film surfaces was significantly reduced by the addition of PEO additives. It seems that 10% addition of PEO additives is enough for the suppression of platelet adhesion on the surfaces. This study demonstrated that the use of PEO-containing block copolymers as additives to the PVC can be a feasible approach to prepare a new type of blood bag.

Biocompatible Materials↗
PubMed2005

Interactions between the reinforcing effects of cocaine and heroin in a drug-vs-food choice procedure in rhesus monkeys: a dose-addition analysis.

RATIONALE: Concurrent abuse of cocaine and heroin is a common form of polydrug abuse, but the interactions between the reinforcing effects of cocaine and heroin are poorly understood. Dose-addition analysis is a tool for the quantitative assessment of drug interactions, but this analysis has not been applied to evaluation of the reinforcing effects of cocaine and heroin. OBJECTIVES: To evaluate interactions between the reinforcing effects of cocaine and heroin using dose-addition analysis. METHODS: Rhesus monkeys were trained under a concurrent-choice schedule of food delivery (1 gm pellets) and drug injections (cocaine or heroin, 0-0.1 mg kg(-1) injection(-1)). Full dose-effect curves were determined for cocaine alone and heroin alone. Subsequently, full dose-effect curves were determined for three fixed-proportion mixtures of cocaine and heroin (fixed proportions of 1:3.2, 1:1 and 3.2:1 cocaine/heroin). Dose-addition analysis was used to assess whether cocaine/heroin interactions were super-additive, additive, or sub-additive. RESULTS: Cocaine, heroin, and all cocaine/heroin mixtures maintained dose-dependent and monotonic increases in drug choice and dose-dependent decreases in response rates. Choice dose-effect curves for cocaine/heroin mixtures were shifted to the left of dose-effect curves for cocaine or heroin alone, and dose-addition analysis indicated that cocaine/heroin interactions on drug choice were sub-additive or additive. Cocaine/heroin interactions on response-rate measures were also sub-additive or additive. CONCLUSIONS: These results confirm that mixtures of cocaine and heroin produce reinforcing effects in rhesus monkeys; however, cocaine/heroin interactions were only or sub-additive or additive. Thus, these results do not support the hypothesis that simultaneously delivered cocaine and heroin produces super-additive reinforcing effects.

Animals↗
PubMed2005

Heart valve cryopreservation: protocol for addition of dimethyl sulphoxide and amelioration of putative amphotericin B toxicity.

AIM: To investigate the need for stepwise addition of dimethyl sulphoxide to heart valves and amelioration of putative amphotericin B toxicity. METHODS: There were four groups: an untreated control (Group 1) and three experimental groups. For the latter, porcine heart valves were exposed to the antibiotic/antimycotic mixture used for disinfecting heart valves in the Bristol Heart Valve Bank, for 24 h at 22 degrees C. Dimethyl sulphoxide (Me2SO, 10% v/v) was added either in two steps (5% then 10%) (Group 2) or in a single step. For single-step addition, valves were either first placed in Hanks' balanced salt solution for 10 min before transfer to the cryoprotectant solution (Group 3) or immersed directly in the 10% cryoprotectant solution (Group 4). The valve leaflets were dissected from the valves and frozen in 10% Me2SO in multi-well tissue culture plates at 1 degrees C/min to -80 degrees C. After storage overnight, the valve leaflets were warmed at approximately 11 degrees C/min and the cryoprotectant was removed by single-step dilution in excess Hartmann's solution. Each leaflet was then divided into four pieces, which were placed in separate wells of a culture plate. Outgrowth of cells from the explants was monitored daily and graded according to the extent of cell growth. RESULTS: After freezing and thawing, only 77% of the explants from valves placed directly into 10% Me2SO (Group 4) showed outgrowth of cells after freezing compared with 89% with two-step addition of Me2SO (Group 2) and 95% with one-step addition after the extra rinse in Hanks' solution (Group 3) (chi2, p=0.001). 92% of unfrozen control explants showed outgrowth of cells (Group 1). Only 37% of Group 4 explants reached confluence compared with 63 and 56%, respectively, of Groups 2 and 3 explants (chi2, p=0.007). The rates of cell growth in Group 2 (two-step addition of Me2SO) and Group 3 (one-step addition of Me2SO with additional Hanks' solution rinse) were similar and faster than the Group 4 (one-step addition of Me2SO without the additional Hanks' rinse). CONCLUSION: Single-step addition of Me2SO before freezing gave similar results to two-step addition provided an additional rinse in Hanks' solution was introduced after exposure to the antibiotic/antimycotic mixture. This suggests that antibiotic/antimycotic carryover may have been harmful during freezing and that the additional rinse in Hanks before one-step addition of Me2SO, and the 5% Me2SO step in the two-step protocol, merely served to reduce this carryover.

Amphotericin B↗
PubMed1997

Quantitative description of analyte migration behavior based on dynamic complexation in capillary electrophoresis with one or more additives.

A comprehensive theory is proposed to describe the migration behavior of analytes in capillary electrophoresis (CE) when one or more additives are present in the buffer solution. This theory amalgamates and extends the previous work done by others. The capacity factor (k') in this theory is defined as the product of the equilibrium constant and the additive concentration, thus, k' changes linearly with additive concentration. The net electrophoretic mobility of an analyte is a function of k', therefore, it can be changed by varying the additive concentration. Three parameters are needed to predict the mobility of an analyte in a one-additive CE system: the mobility of the free analyte, the mobility of the complex, and the equilibrium constant for the analyte-additive interaction (which determines the fraction of the free analyte at different additive concentrations). When additives are used, the change in viscosity obscures this relationship, therefore, a viscosity correction factor is required to convert all mobilities to an ideal state where the viscosity remains constant. The migration behavior of an analyte in a solution with multiple additives can be predicted and controlled, once the equilibrium constants of the interactions between the analyte and each of the additives are obtained separately. beta-Cyclodextrin and hydroxypropyl-beta-cyclodextrin are used as additives and the migration behavior of phenol, p-nitrophenol, and benzoic acid are studied as a model system to verify this theory. When the necessary viscosity correction factor is included, the net electrophoretic mobilities of the analytes obtained from experimental results agree with the values predicted by the theory based on dynamic complexation. Although only experiments with one and two additives were carried out to verify the theory, the equations apply to situations when more than two additives are used. The relationship between the theories of electrophoresis and chromatography is clarified.

2-Hydroxypropyl-beta-cyclodextrin↗
PubMed2000

Platelet adhesion onto segmented polyurethane film surfaces modified by addition and crosslinking of PEO-containing block copolymers.

Polyethylene oxide (PEO) surfaces were prepared by the addition of PEO-containing amphiphilic block copolymers as surface modifying additives and of dicumyl peroxide (DCP) as a crosslinking agent in segmented polyurethane (PU). PEO-polypropylene oxide-PEO triblock copolymers (Pluronics) with different PEO chain length (from 0 to 98) were used as the surface modifying additives. The PEO additives in the PU film were then crosslinked to be stably entrapped in the PU matrix. The crosslinking was done by free radicals produced from the decomposition of DCP in the film through heating (120 degrees C) or ultraviolet irradiation (254 nm). The surface properties of the PEO additive-entrapped PU films were investigated by the measurement of water contact angles and electron spectroscopy for chemical analysis. The bulk properties such as water absorption, long-term film stability, and tensile strength and elongation at break, were also investigated. It was observed that addition of a small amount (5 wt% based on PU) of the PEO additives resulted in a considerable change of surface characteristics. The PEO additives were stably entrapped in the PU films by crosslinking of them, without significant changes of bulk properties of the films. From the platelet adhesion test on the prepared PEO additive-containing film surfaces, it was observed that the platelet adhesion on the surfaces decreases with increase in PEO chain length of PEO additives. The film surface containing additive with long PEO chains (chain length of 98) was particularly effective in preventing platelet adhesion. The crosslinking of the PEO additives in PU films did not affect the behavior of platelet adhesion on the surfaces; the films with crosslinked PEO additives showed similar platelet adhesion on the surfaces to the films with uncrosslinked ones.

Biocompatible Materials↗
PubMed2001

Catalytic asymmetric organozinc additions to carbonyl compounds.

Because of the tremendous effort of a great number of researchers, the catalytic asymmetric dialkylzinc addition to aldehydes has become a mature method. Ligands of diverse structures have been obtained, and high enantioselectivity for all different types of aldehydes have been achieved. Among the representative excellent catalysts are compounds 1, 8, 120, 325, 352, and 360 discussed above. However, compared to the well-developed dialkylzinc addition, the catalytic asymmetric reactions of aryl-, vinyl-, and alkynylzinc reagents with aldehydes are still very much under developed. Although catalysts such as (S)-402 and 210 prepared by Pu and Bolm have shown good enantioselectivity for the reaction of diphenylzinc with certain aromatic and aliphatic aldehydes, the generality of these catalysts for other [formula: see text] arylzinc reagents have not been studied. The vinylzinc additions using ligands 1 and 412 reported by Oppolzer and Wipf were highly enantioselective for certain aromatic aldehydes but not as good for aliphatic aldehydes. Carreira discovered highly enantioselective alkynylzinc additions to aldehydes promoted by the chiral amino alcohol 415, but this process was not catalytic yet. Ishizaki achieved good enantioselectivity for the catalytic alkynylzinc addition to certain aldehydes by using compounds 160, but the enantioselectivity for simple linear aliphatic aldehydes was low. Another much less explored area is the organozinc addition to ketones. Yus and Fu showed very promising results by using ligands 381 and 406 for both dialkylzinc and diphenylzinc additions to ketones, but the scope of these reactions were still very limited. Therefore, more work is needed for the aryl-, vinyl-, and alkynylzinc additions and for the organozinc addition to ketones, although many good catalysts have been obtained for the dialkylzinc addition to aldehydes. Development of these reactions will allow the catalytic asymmetric synthesis of a great variety of functional chiral alcohols that are either the structural units or synthons of many important organic molecules as well as molecules of biological functions. Macromolecular chiral catalysts have become a very attractive research subject in recent years because these materials offer the advantages of simplified product isolation, easy recovery of the generally quite expensive chiral catalysts, and potential use for continuous production. Three types of macromolecules including flexible achiral polymers anchored with chiral catalysts, rigid and sterically regular main chain chiral polymers, and chiral dendrimers have been used for the asymmetric organozinc addition to aldehydes. Among these materials, the binaphthyl-based polymers such as (R)-451 developed by Pu have shown very high and general enantioselectivity. Study of the binaphthyl polymers in the asymmetric organozinc addition has demonstrated that it is possible to systematically modify the structure and function of the rigid and sterically regular polymer for the development of highly enantioselective polymer catalysts. The catalytic properties of highly enantioselective monomer catalysts can also be preserved in the rigid and sterically regular polymer provided the catalytically active species of the monomer catalyst is not its aggregate. The TADDOL-based polymers and dendrimers prepared by Seebach showed very high and stable enantioselectivity for the diethylzinc addition to benzaldehyde even after many cycles. These studies on macromolecular chiral catalysts demonstrate that these materials are potentially very useful for practical applications.

Catalysis↗
PubMed1991

Additive inhibition of afferent and efferent immunological responses of human peripheral blood mononuclear cells by verapamil and cyclosporine.

We have studied the effects of verapamil (0-50 microM) on the in vitro immunological function of human peripheral blood mononuclear cells in the presence or absence of cyclosporine (0-600 ng/ml). The proliferative response to phytohemagglutinin, OKT3, and alloantigens, the generation of cytotoxic T lymphocytes following allogeneic stimulation, and mitogen-induced reduction of intracellular ATP were inhibited in a concentration-dependent fashion by verapamil alone and by cyclosporine alone. When the two drugs were added to the same culture, additive inhibition was observed. A verapamil concentration of 5 microM usually reduced by at least 50% the amount of cyclosporine necessary to cause the same level of inhibition seen when no verapamil was present. The additive inhibition of the two drugs was likely not due to additive inhibition of IL-2 responsiveness, since neither drug alone inhibited the response of an IL-2-dependent T cell clone (CTLL-2) to recombinant IL-2 except at the highest concentrations tested, where a mild additive effect was noted. Nor was the additive inhibition related to an additive effect on total IL-2 receptor expression since an additive inhibitory effect on PHA-induced IL-2 receptor expression was only seen with 50 microM verapamil, while additive functional effects on mitogen- and antigen-induced proliferation and alloantigen-induced CTL generation were seen with 5 microM verapamil doses. Verapamil or cyclosporine alone inhibited IL-2 production of PHA- and phorbol ester-stimulated peripheral blood mononuclear cells--however, no additive effect was seen when the two drugs were both added to culture, probably because of the very potent inhibition by cyclosporine alone. Natural killer cell activity of human peripheral blood mononuclear cells against K562 target cells was significantly inhibited by verapamil in a concentration-dependent fashion, while cyclosporine had a more modest concentration-dependent effect. The combination of both drugs demonstrated additive inhibition. Effector function of cytotoxic T lymphocytes was modestly inhibited by either verapamil or cyclosporine alone. A combination of the highest concentrations of verapamil and cyclosporine caused an additive inhibitory effect. In summary, these data demonstrate that verapamil and cyclosporine have concentration-dependent inhibitory activities on both the afferent and efferent limbs of immunity that were additive when verapamil was used in a concentration of at least 5 microM. The additive effects are probably not related to effects on IL-2 circuitry.

Adult↗
PubMed2004

Effects of additional starch or fat in late-gestating high nonstarch polysaccharide diets on litter performance and glucose tolerance in sows.

The effects of feeding additional starch or fat from d 85 of gestation until parturition on litter performance and on glucose tolerance in sows that were fed a diet with a high level of fermentable nonstarch polysaccharides (NSP) were studied. The day after breeding, 141 multiparous sows were assigned to the experiment. At d 85 of gestation, sows were assigned to the treatments. Sows were fed 3.4 kg/d (as-fed basis) of a high-NSP diet or the same quantity of the high-NSP diet and an additional 360 g of starch (from wheat starch) daily, or the same quantity of the high-NSP diet and an additional 164 g of fat (from soybean oil) daily. During lactation, all sows were given free access to the same lactation diet. Approximately 1 wk before the expected time of parturition, an oral glucose tolerance test was performed in 38 randomly chosen sows by feeding pelleted glucose (3 g/kg BW0.75). Blood samples for glucose analyses were taken at -10, 10, 20, 30, 40, 50, 60, 70, 80, 90, 105, and 120 min after glucose was fed. The supply of additional dietary starch or fat did not increase piglet birth weight or total litter weight at birth. Sows that were fed the high-NSP diet had more (P = 0.097) live-born piglets and fewer (P = 0.084) stillborn piglets than did sows that were fed additional fat, whereas sows that were fed additional starch were intermediate for these variables. Piglet mortality after birth was not affected by dietary treatment. Body weight and backfat gains in the last month of gestation were higher for sows fed additional starch or fat than for sows fed the high-NSP diet (P < 0.001 and P = 0.017, respectively). Feed intake in lactation was greatest by sows fed the high-NSP diet, least by sows fed additional starch at the end of gestation, and intermediate by sows fed additional fat (P = 0.099). The differences in lactation feed intake did not result in differences in BW and backfat losses during lactation. Sows that were fed additional fat had the greatest glucose area under the curve (P = 0.044), indicating that these sows were less tolerant to glucose. In conclusion, feeding additional energy (starch or fat) in late-gestating sows that are fed a high-NSP diet did not increase litter weight at birth or piglet survival, but did increase maternal gain. Feeding sows additional energy from fat might induce glucose intolerance, whereas feeding sows additional energy from starch did not induce glucose intolerance.

Animals↗
PubMed2002

Effects of spray-dried animal plasma in milk replacers or additives containing serum and oligosaccharides on growth and health of calves.

The effects of spray-dried animal plasma in milk replacer without or with the addition of additives containing fructooligosaccharides and spray-dried serum on health, growth, and intake of Holstein calves was measured in two 56-d experiments. In experiment 1, 120 calves were fed milk replacer containing 0 or 20% of crude protein as spray-dried bovine plasma for 42 d and 30 to 60 g/d of additives containing whey protein concentrate or bovine serum for the first 15 d. Commercial calf starter was available from d 29, and water was available at all times. In experiment 2, 120 calves were fed milk replacer containing 0 or 16% of crude protein as spray-dried bovine plasma with 0 or 30 to 60 g/d of additive containing bovine serum for the first 15 d. Additive containing bovine serum also contained fructooligosaccharides, whey, and vitamin/mineral premix. In experiment 1, calves fed additive containing bovine serum tended to have fewer days with diarrhea, lower use of electrolytes, and improved BW gain from d 29 to 56. The addition of spray-dried bovine plasma to milk replacer did not influence any parameter measured. In experiment 2, calves fed additive containing bovine serum or milk replacer containing spray-dried bovine plasma had lower mortality (4.4 vs. 20%) and tended to have improved fecal scores and fewer days with scours. Antibiotic use was lower when calves were fed the additive. Indices of enteric health (incidence of scours and treatment with antibiotics and electrolytes) were improved when plasma was added to milk replacer throughout the milk feeding period or as an additive during the first 15 d of the milk feeding period, when calves were most susceptible to enteric pathogens. The addition of spray-dried animal plasma to milk replacer or the addition of additive containing spray-dried bovine serum and oligosaccharides may be a useful adjunct to animal management during periods of stress.

Animal Feed↗
PubMed1997

Associations between off-label feed additives and farm size, veterinary consultant use, and animal age.

Data from the United States National Swine Survey collected by the National Animal Health Monitoring System were used to describe the use of feed additives in swine feeds. Data were collected from 710 farms. The concentration of feed additives expressed in grams per ton of complete feed was described by stage of production, and the use of feed additives above the labeled treatment levels (i.e. off-label) was identified. Of the 3328 feeds, about 79% contained feed additives used in the labeled manner. For all classes of pigs, the prevalence of labeled feed additive use was greater than 75%. Penicillin was used according to its label most often, followed by apramycin, bacitracin, tetracyclines, lincomycin, and tylosin. Carbadox had the highest prevalence of off-label use. Of the 699 feeds that included feed additives in an off-label manner, about 57% included additives at greater than the recommended concentrations or were fed to an incorrect class of pig. About 56% of the feeds had off-label combinations of additives. Small farms were more likely to use rations with no feed additives than intermediate or large farms (P < 0.001). Of those farms using feed additives, the odds of a small farm using all feed additives in the labeled manner was 7.7 times that of an intermediate or large farm (P < 0.0001). After controlling for herd size, producers who used a veterinary consultant were 2.1 times more likely to use feeds with feed additives (P < 0.0001).

Aging↗
PubMedDate not supplied

Additive usage levels.

With the adoption of the European Parliament and Council Directives on sweeteners, colours and miscellaneous additives the Commission is now embarking on the project of coordinating the activities of the European Union Member States in the collection of the data that are to make up the report on food additive intake requested by the European Parliament. This presentation looks at the inventory of available sources on additive use levels and concludes that for the time being national legislation is still the best source of information considering that the directives have yet to be transposed into national legislation. Furthermore, this presentation covers the correlation of the food categories as found in the additives directives with those used by national consumption surveys and finds that in a number of instances this correlation still leaves a lot to be desired. The intake of additives via food ingestion and the intake of substances which are chemically identical to additives but which occur naturally in fruits and vegetables is found in a number of cases to be higher than the intake of additives added during the manufacture of foodstuffs. While the difficulties are recognized in contributing to the compilation of food additive intake data, industry as a whole, i.e. the food manufacturing and food additive manufacturing industries, are confident that in a concerted effort, use data on food additives by industry can be made available. Lastly, the paper points out that with the transportation of the additives directives into national legislation and the time by which the food industry will be able to make use of the new food legislative environment several years will still go by; food additives use data by the food industry will thus have to be reviewed at the beginning of the next century.

Diet Surveys↗
PubMed2005

Synergistic interactions between commonly used food additives in a developmental neurotoxicity test.

Exposure to non-nutritional food additives during the critical development window has been implicated in the induction and severity of behavioral disorders such as attention deficit hyperactivity disorder (ADHD). Although the use of single food additives at their regulated concentrations is believed to be relatively safe in terms of neuronal development, their combined effects remain unclear. We therefore examined the neurotoxic effects of four common food additives in combinations of two (Brilliant Blue and L-glutamic acid, Quinoline Yellow and aspartame) to assess potential interactions. Mouse NB2a neuroblastoma cells were induced to differentiate and grow neurites in the presence of additives. After 24 h, cells were fixed and stained and neurite length measured by light microscopy with computerized image analysis. Neurotoxicity was measured as an inhibition of neurite outgrowth. Two independent models were used to analyze combination effects: effect additivity and dose additivity. Significant synergy was observed between combinations of Brilliant Blue with L-glutamic acid, and Quinoline Yellow with aspartame, in both models. Involvement of N-methyl-D-aspartate (NMDA) receptors in food additive-induced neurite inhibition was assessed with a NMDA antagonist, CNS-1102. L-glutamic acid- and aspartame-induced neurotoxicity was reduced in the presence of CNS-1102; however, the antagonist did not prevent food color-induced neurotoxicity. Theoretical exposure to additives was calculated based on analysis of content in foodstuff, and estimated percentage absorption from the gut. Inhibition of neurite outgrowth was found at concentrations of additives theoretically achievable in plasma by ingestion of a typical snack and drink. In addition, Trypan Blue dye exclusion was used to evaluate the cellular toxicity of food additives on cell viability of NB2a cells; both combinations had a straightforward additive effect on cytotoxicity. These data have implications for the cellular effects of common chemical entities ingested individually and in combination.

Animals↗
PubMed2006

The effect of acidic and basic additives on the enantioseparation of basic drugs using polysaccharide-based chiral stationary phases.

The enantioseparation of nine commercially available basic drugs was achieved on polysaccharide-based chiral stationary phases with the acidic additive ethanesulfonic acid and the basic additive butylamine. Seven different commercially available CSPs were used for the study (AD, AS, OD, OJ, OG, OB, and OC). Mobile phase additives have been proven to be essential in obtaining satisfactory enantio-resolution in terms of both efficiency and selectivity. Significantly improved selectivities were obtained for the basic probe drugs with the acidic additive, ethanesulfonic acid, rather than the basic additive, butylamine. This is best seen with Chiralpak AS CSP. No enantioseparation for the nine drugs was observed when butylamine was used as an additive; however, satisfactory enantioseparation for the nine drugs was achieved using ethanesulfonic acid. Higher column efficiencies were observed with the acidic additive, especially when isopropanol was used as a modifier. Higher sensitivity was also achieved with ethanesulfonic acid because of the significantly lower background at the UV detection wavelength. The acidic additive was demonstrated to be superior to the basic additive for the enantioseparation of basic drugs using seven different polysaccharide-based CSPs. These results are counterintuitive to the common "rule of thumb" in enantioseparation that states acidic additives work best for acidic analytes and basic additives work best for basic analytes. The beneficial effects of acidic additive in enantioseparations observed in this study could significantly improve the applicability of polysaccharide-based CSPs for the enantioseparation of basic analytes.

2-Propanol↗
PubMed1993

Protein adsorption to poly(ether urethane ureas) modified with acrylate and methacrylate polymer and copolymer additives.

To understand better blood interactions with poly(ether urethane urea) (PEUU) materials, a radioimmunoassay and whole or diluted human plasma were used to characterize the presence of fibrinogen, immunoglobulin G, factor VIII/von Willebrand factor, Hageman factor (factor XII), and albumin on a PEUU formulation and on PEUU formulations modified with the amphiphilic additive Methacrol 2138F (co[diisopropylaminoethyl methacrylate (DIPAM)/decyl methacrylate] [3/1]), or with hydrophobic acrylate or methacrylate polymer or copolymer additives. The protein adsorption assay showed that PEUU films loaded or coated with Methacrol 2138F (Methacrol) or homopoly-DIPAM (h-DIPAM) adsorbed significantly lower amounts of the studied proteins than did either the base PEUU formulations or the PEUUs loaded with the more hydrophobic acrylate or methacrylate polymer additives. Experiments with Methacrol-loaded PEUUs, where the loading of Methacrol was varied from 0.25 wt% to 20.0 wt%, showed that the adsorption of each of the characterized proteins did not vary significantly throughout the Methacrol loading range, and that all Methacrol-loaded PEUU formulations adsorbed significantly lower amounts of the studied proteins than did the unloaded PEUU. Phase separation within the additive loaded PEUUs was characterized by scanning electron microscopy (SEM). The solubility parameters of the additives, as well as of the base PEUU, were calculated and used to interpret differences in phase separation of the additive modified PEUUs. The analysis showed that additives of lower solubility parameter phase-separated into fewer large microdroplets within the PEUU matrix. SEM analysis also showed that additive microdroplets were not present on the air side surface of loaded PEUUs. To explain the differences in protein adsorption to the air side of additive loaded PEUUs when compared to the base PEUU, it was assumed that the additives near this region of the solvent swollen PEUU matrix may have migrated to, at, or near the PEUU-air interface during film formation, creating an additive enriched PEUU surface region. Once at this surface region, it was suggested that dynamic surface reorientation in response to an aqueous medium ensured that the additives were able significantly to influence protein adsorption behavior only if they interacted with aqueous media more favorably than the PEUU.

Acrylates↗
PubMed2001

Feasibility of a multi-component additive for efficient control of activated sludge filamentous bulking.

Instantaneous improvement of the settling of bulking filamentous activated sludge can be achieved by the addition of a polymer or a large amount (up to 100% of the MLSS concentration) of talc powder to the sludge. Long-term improvement relies on repeated additions, as these additives have no adverse effects on the causative filaments. A multi-component additive was compared to the traditional additives in lab-scale activated sludge units using three highly filamentous sludges from different industrial treatment plants. The study demonstrated that the multi-component additive was superior to the traditional remedies. It was shown that, in the case of severe filamentous bulking, a single addition of the new additive immediately improved sludge settling and exerted a destructive effect on the causative filamentous bacteria. Thus, the latter additive also ensured a long-term sludge sedimentation improvement. The traditional additives exhibited an immediate and short-term effect. The novel additive also retarded sludge rising due to denitrification and it improved sludge dewaterability. The study revealed Nostocoido limicola II, with slightly hydrophobic cell wall, to be somewhat resistant to the quaternary ammonium salt present as biocide in the additive.

Bacteria↗
PubMed1999

Studies of the behaviour and fate of the polymer-additives octadecyl-3-(3.5-di-t-butyl-4-hydroxyphenyl)propionate and tri-(2.4-di-t-butylphenyl)phosphite in the environment.

In order to evaluate the environmental risk potential of the polymer-additives octadecyl-3-(3.5-di-t-butyl-4-hydroxyphenyl)propionate (additive 1) and tri-(2.4-di-t-butylphenyl)phosphite (additive 2) we have studied the degradation of the 14C-labelled single components and their release from a polypropylene matrix in abiotic and biotic test systems as well as their transport behaviour in soil. The biotic degradation in waste compost, activated sludge and in soil was studied. In order to conduct release tests, waste disposal material were used as well. The abiotic degradation was effectuated by photooxidation at a catalytic surface. The highest mineralisation rates were obtained by photooxidative degradation of the two test substances. The maximum content of bounded residues was found for additive 1 in soil and for additive 2 in waste compost. In the extracts of soil and compost, the principal metabolites could be identified in the case of additive 1 as 7.9-di-t-butyl-1-oxaspiro[4.5]deca-6.9-dien-2.8-dion and in activated sludge as the methyl ester of 3-(3.5-di-t-butyl-4-hydroxyphenyl) propionic acid. Additive 2 metabolised in all degradation tests nearly completely under formation of two products. The main component was identified as tri-(2.4-di-t-butylphenyl)phosphate. Both polymer-additives were eluated from the chosen soil types. The transport behaviour of additive 1 was independent from the soil type. In all test matrices additive 1 as well as additive 2 were released from polypropylene. Because the amounts of additive 1 and 2 absorbed onto soil particles were taken into account, the highest liberation rates were found in the soil test.

Antioxidants↗
PubMed2001

Reactivity of (eta(6)-arene)tricarbonylchromium complexes toward additions of anions, cations, and radicals.

A computational and experimental study of additions of electrophiles, nucleophiles, and radicals to tricarbonylchromium-complexed arenes is reported. Competition between addition to a complexed arene and addition to a noncomplexed arene was tested using 1,1-dideuterio-1-iodo-2-((phenyl)tricarbonylchromium)-2-phenylethane. Reactions under anionic and cationic conditions give exclusive formation of 1,1-dideuterio-1-((phenyl)tricarbonylchromium)-2-phenylethane arising from addition to the complexed arene. Radical conditions (SmI(2)) afford two isomeric products, reflecting a 2:1 preference for radical addition to the noncomplexed arene. In contrast, intermolecular radical addition competition experiments employing ketyl radical addition to benzene and (benzene)tricarbonylchromium show that addition to the complexed aromatic ring is faster than attack on the noncomplexed species by a factor of at least 100,000. Density functional theory calculations using the B3LYP method, employing a LANL2DZ basis set for geometry optimizations and a DZVP2+ basis set for energy calculations, for all three reactive intermediates showed that tricarbonylchromium stabilizes all three types of intermediates. The computational results for anionic addition agree well with established chemistry and provide structural and energetic details as reference points for comparison with the other reactive intermediates. Intermolecular radical addition leads to exclusive reaction on the complexed arene ring as predicted by the computations. The intramolecular radical reaction involves initial addition to the complexed arene ring followed by an equilibrium leading to the observed product distribution due to a high-energy barrier for homolytic cleavage of an exo bond in the intermediate cyclohexadienyl radical complex. Mechanisms are explored for electrophilic addition to complexed arenes. The calculations strongly favor a pathway in which the cation initially adds to the metal center rather than to the arene ring.

Anions↗
PubMed2004

Comparison of the kinetics and thermodynamics for methyl radical addition to C=C, C=O, and C=S double bonds.

The barriers, enthalpies, and rate constants for the addition of methyl radical to the double bonds of a selection of alkene, carbonyl, and thiocarbonyl species (CH(2)=Z, CH(3)CH=Z, and (CH(3))(2)C=Z, where Z = CH(2), O, or S) and for the reverse beta-scission reactions have been investigated using high-level ab inito calculations. The results are rationalized with the aid of the curve-crossing model. The addition reactions proceed via early transition structures in all cases. The barriers for addition of methyl radical to C=C bonds are largely determined by the reaction exothermicities. Addition to the unsubstituted carbon center of C=C double bonds is favored over addition to the substituted carbon center, both kinetically (lower barriers) and thermodynamically (greater exothermicities). The barriers for addition to C=O bonds are influenced by both the reaction exothermicity and the singlet-triplet gap of the substrate. Addition to the carbon center is favored over addition to the oxygen, also both thermodynamically and kinetically. For the thiocarbonyl systems, addition to the carbon center is thermodynamically favored over addition to sulfur. However, in this case, the reaction is contrathermodynamic, addition to the sulfur center having a lower barrier due to spin density considerations. Entropic differences among corresponding addition and beta-scission reactions are relatively minor, and the differences in reaction rates are thus dominated by differences in the respective reaction barriers.

Journal Article↗