Search PubMed⌕ Search

SEARCH · Search PubMed

Results for “Wettability”

Search indexed PubMed citations on genomics, clinical trials, systematic reviews and public health. Explore titles, authors and supplied subject terms, then open the PubMed record.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 217 records · Page 12Linked to original sources
PubMed1992

Wettability of impression materials treated with disinfectants.

The purpose of this investigation was to comprehensively compare various combinations of impression materials, die stones and disinfectants so as to provide clinical guidelines for selection of materials. The effect of immersion disinfection on the wettability of five types of impression materials, polyether, light-cured polyether urethane dimethacrylate, polysulfide, hydrophilic and hydrophobic polyvinyl siloxanes, was evaluated. This evaluation was determined by contact angle measurement of two die stones on the impression materials and also by bubble formation in casts made from the same materials after disinfection. The disinfectants utilized were 0.5% sodium hypochlorite and 0.13% glutaraldehyde-phenate. There were significant interactive effects (P less than 0.02) on contact angle between stone and disinfectant, impression and disinfectant, and impression and stone. The effect of disinfection was found to vary among impression materials. Although there was a significant correlation found between contact angle and bubble formation, contact angle was not found to be a strong predictor of bubble formation in this study. For these findings, it is recommended to evaluate each disinfectant and impression material combination individually.

Analysis of Variance↗
PubMed1991

Preliminary experience with growth factor and porcine graft-young collagenous wettable membrane in the treatment of chronic diabetic ulcer.

Chronic ulcers are well-known complication of diabetes mellitus, often compounded by infection. Healing of lesions is problematic in some cases using conventional treatment. We have treated a group of six hospitalized diabetic patients with chronic ulcer by a combined regimen consisting of metabolic control, parenteral antibiotics, growth factor and porcine graft-young collagenous wettable membrane (YCWM) treatment. Five of our uncontrolled group had their ulcers improved at 87 +/- 37.6 hospital days after 45.8 +/- 20.2 days of growth factor and YCWM treatment. In conclusion, growth factor and porcine graft-YCWM therapy may be promising as an alternative choice in treatment of chronic diabetic ulcer.

Aged↗
PubMedDate not supplied

Cetylpyridinium chloride adsorption on the wettability and elemental surface composition of human enamel.

To determine the influence of cetylpyridinium chloride (CPC) adsorption on the wettability and elemental surface composition of human enamel, with and without adsorbed salivary constituents, surface-free energies and elemental compositions were determined. The surface-free energies were estimated from contact angle measurements; whereas the elemental compositions were determined by X-ray photoelectron spectroscopy. Surface-free energies of ground and polished enamel (88 +/- 8 mJ.m-2 and saliva-coated enamel (103 +/- 4) became similar (109-112) upon adsorption of CPC. Also, the N/C concentration ratios of the ground and polished enamel surface (0.06) and saliva-coated enamel (0.21) become equal upon CPC adsorption. The N/C concentration ratio after CPC adsorption (N/C = 0.04) corresponds with the value expected on basis of the molecular structure of CPC. The strongest evidence for adsorption of CPC to both ground and polished enamel and saliva-coated enamel is presented by the double nitrogen N1s peak. This double nitrogen1s peak is not observed for ground and polished enamel nor for enamel with a salivary coating on top of adsorbed CPC, which indicates that adsorbed CPC can be completely screened by salivary proteins. This study demonstrates that CPC has a definite capacity to adsorb both on ground and polished enamel as well as on pellicle-coated enamel.

Adsorption↗
PubMedDate not supplied

Wettability of elastomeric impression materials: effect of selected surfactants.

This study evaluated seven classes of 65 impression materials for the effect of selected surfactants on contact angle values for high-strength stone. Uniform surfaces of the materials were treated with a surfactant, and stone samples were poured on each impression material surface. The samples were sectioned and photographed for measurement of the advancing contact angles. Statistical analysis supported four conclusions: No significant difference was found between the two surfactants. Both surfactants were significantly better than the control (water). Polyether impression materials were superior in wettability to the other elastomeric impression materials tested. With respect to contact angle, two distinct groups of impression materials emerged. Reversible hydrocolloid (47.7 +/- 1.5), irreversible hydrocolloid (36.8 +/- 8.8), and polyether (45.8 +/- 7.6) formed a hydrophilic group. A hydrophobic group consisted of the polysulfide (62.6 +/- 10.1), poly(vinyl siloxane) (71.1 +/- 12.3), condensation-reaction silicone (74.1 +/- 11.0), and polyethene (75.9 +/- 14.6) materials.

Dental Impression Materials↗
PubMedDate not supplied

Liquid chromatographic determination of bendiocarb in technical materials and wettable powder formulations: collaborative study.

A liquid chromatographic method for determination of bendiocarb in technical materials and wettable powders was tested by 12 collaborators. Bendiocarb is dissolved in acetonitrile containing 0.1% propiophenone as internal standard. This solution is analyzed on a liquid chromatograph utilizing a reverse phase (C18) column. The compound is detected at 254 nm and peak area is used for quantitation. The 3 different materials studied contained 20, 80, and nominally 100% bendiocarb. Each was examined in duplicate to provide the necessary matched pairs. Collaborators approved of the ease and simplicity of the method and, in particular, the way the method can be applied to automatic injection assemblies. The statistical data show acceptable precision of the method: Reproducibility coefficients of variation were 20% material, 2.04%; 80% material, 1.02%; and nominal 100% material (technical product), 0.64%. The method has been adopted official first action.

Carbamates↗
PubMed1984

Prentice Medal lecture: contact lens wettability--myths, mysteries, and realities.

The author shows that the wetting of contact lens on the eye is a complex process. Measuring the contact angle is possible by several techniques but knowing the contact angles (advancing and receding) is not enough to define wettability in scientific terms. A contact lens on the eye, bathed in lacrimal fluids and subjected to a number of pressures, presents a challenging problem in physics as well as in clinical vision care.

Adult↗
PubMed1977

Platelet adhesion to solid surfaces. The effects of plasma proteins and substrate wettability.

Platelet adhesion tests were performed using protein-free washed pig platelet suspensions in conjunction with a simple open-static method on smooth, well-defined protein-coated glass and polymer surfaces and bare glass and polymer surfaces. A normalization technique was introduced in an attempt to correct day-to-day variations in platelet reactivity. Protein coatings reduced platelet adhesion (to glass as well as polymer surfaces) to such a low level that the platelet density on one protein/substrate combination could not be distinguished from that on any other protein/substrate combination. Specifically, albumin and fibrinogen behaved identically regardless of the substrate on which they were coated. The addition of albumin and gamma-globulin to the platelet-suspension also significantly reduced platelet adhesion to glass surfaces. Whereas the extent of platelet adhesion from protein-free suspensions to bare glass and polymer surfaces depended on their wettability, the presence of specific chemical groups in the proteins, such as (-CONH-), may have an overriding effect on platelet adhesion to solid surfaces.

Blood Proteins↗
PubMed1999

Bovine serum albumin adsorption on titania surfaces and its relation to wettability aspects.

The adsorption of bovine serum albumin (BSA) from sodium chloride solution and Hanks' balanced salt solution (HBSS) onto TiO2-silicon surfaces is studied by reflectometry in stagnation point flow. The results are compared with those obtained by dynamic contact-angle (DCA) analysis of titanium substrates. The adsorption isotherms show that the adsorbed amount of protein always is lower in HBSS, that is, in the presence of calcium and phosphate ions. This may be related to the increase in surface hydrophilicity caused by these ions, as suggested by the authors in previous works. The rate of adsorption also is lower in HBSS solutions. Comparison of the initial adsorption rates with the rate of mass transfer to the surface reveals that in both solvents only a small fraction of the protein that arrives at the surface adsorbs onto it. Electrostatic and/or conformational effects can explain the energy barrier to adsorption. The DCA analysis of high concentration (4 mg/mL) protein solutions shows a strong reduction of the contact-angle hysteresis, both in HBSS and in NaCl solutions, which confirms that the immediate adsorption of the protein to the surface forms a stable, hydrophilic film.

Adsorption↗
PubMed1995

Wettability and interfacial interactions in bioceramic-body-liquid systems.

Wetting experiments, by the sessile drop technique, were carried out at 37 degrees C in air to determine the surface and interfacial interactions that take place in various solid bioceramics based on Al2O3, ZrO2(YPZ), SiO2, and TiO2 in contact with water, Ringer solution, artificial synovial fluid, calf serum, human plasma, and whole blood (+ EDTA). The surface energy of the liquids was measured by the ring method. The calculated values of the energy of interaction (work of adhesion) reveal that intermolecular forces act across the solid-liquid interfaces. The contribution of the dispersion and polar interactions to the surface energy of the polar liquids and the pure or mixed oxides was determined assuming that in the system of Mn-steel-liquids only dispersion forces act at the interface. It was found that the contribution of the polar interactions to the energy of interaction at the solid-liquid interface increases with the glassy phase content of the oxide that causes reduction of the measured contact angle.

Aluminum Oxide↗
PubMed2005

The effect of support material and conditioning on wettability of PAH/PSS multilayer films.

An efficient method for characterizing wetting properties of heterogeneous surfaces produced by sequential adsorption of polyelectrolytes was developed. Three types of polyelectrolytes were used: polyallylamine hydrochloride (PAH), polyethyleneimine (PEI), both of a cationic type, and polysodium 4-styrenesulfonate (PSS), of an anionic type. Multilayer films were prepared by 'layer-by-layer' (LbL) deposition technique. Natural ruby mica, glass, titanium foil and silicon wafers were used as the support material for PE films. Wetting of polyelectrolyte films was determined experimentally by contact angle measurements, using technique of direct image analysis of shape of sessile drops. Periodic oscillations in contact angle values were observed for multilayers terminated by polycation and polyanion, respectively, and the variations in contact angle values strongly depended on the conditions of adsorption and multilayer treatment after deposition. Therefore, the influence of ionic strength of polyelectrolyte solution used for deposition on wetting of multilayer films was considered and also the effect of conditioning in different environments was investigated. It is usually assumed that film properties and stability strongly depend on the first layer which is used to anchor a multilayer at the surface of support material. To investigate influence of the first layer, PAH/PSS films were compared with more complex ones having PEI as the first layer with a sequence of PSS/PAH deposited on top of it.

Adsorption↗
PubMed2005

Surface free energy and wettability of silyl layers on silicon determined from contact angle hysteresis.

Using the literature data of the advancing and receding contact angles for water, diiodomethane and hexadecane measured on various hydrophobic silyl layers (mostly monolayers) produced on silicon wafers the apparent surface free energies gamma(s)(tot) were calculated by applying new model of the contact angle hysteresis interpretation. It was found that, for the same silyl layer, the calculated gamma(s)(tot) values to some degree depended on the probe liquid used. Therefore, thus calculated the surface free energies should be considered as apparent ones. Moreover, also the values of the dispersion component gamma(s)(d) of these layers depend on the probe liquid used, but to a less degree. This must be due to the strength of the force field originating from the probe liquid and the spacing between the interacting molecules. The relationships between gamma(s)(tot) and gamma(s)(d) are discussed on the basis of the equations derived. It may be postulated that applying proposed model of the contact angle hysteresis and calculating the apparent total surface free energies and the dispersion contributions better insight into wetting properties of the silyled silicon surface can be achieved.

Biophysics↗
PubMed2003

Wettability of polytetrafluoroethylene by aqueous solutions of two anionic surfactant mixtures.

Advancing contact angle (theta) measurements were carried out on mixtures of aqueous solutions of sodium dodecyl sulfate (SDDS) and sodium hexadecyl sulfonate (SHDSs) on polytetrafluoroethylene (PTFE). The obtained results indicate that there were only small contact angle changes over the range of surfactant concentrations in the solution, corresponding to the unsaturated surfactant layer at the aqueous solution-air interface. However, when saturation of the surfactant layer was achieved a considerable decrease in the contact angle (increase in costheta) as a function of concentration was observed. The dependence of costheta on the monomer mole fraction of SHDSs in the mixture of the surfactants (alpha) for aqueous solutions of mixtures at concentrations corresponding to the critical micelle concentration (CMC) had a maximum at alpha=0.2. From the results of these measurements and application of the Gibbs and Young equations the ratio of the excess concentration of surfactants at the solid-aqueous solution interface to the excess of their concentration at the aqueous solution-air interface was calculated. On the basis of the measurements and calculations it was found that there was a straight linear relationship between the adhesion tension and surface tension of aqueous solutions of surfactant mixtures at a given alpha, and that the slope of the obtained straight lines was equal to -1, which suggests that the surface excess of the surfactant concentrations at the PTFE-solution interface is the same as that at the solution-air interface for a given bulk concentration of the surfactant mixtures. The dependence of the surface concentration excess at the PTFE-solution interface on the monomer mole fraction of SHDSs in the mixture of the surfactants for the concentration region of the mixture of aqueous solutions, corresponding to a saturated monolayer, had a maximum at alpha=0.4, probably resulting from increased degree of binding between adsorbed surface-active ions and counterions. It was also found that the critical surface tension of PTFE wetting by aqueous solutions of two anionic surfactant mixtures was equal to 23.35 mN/m, which was higher than the critical surface tension of wetting determined from straight linear dependence between costheta and surface tension of alkanes (19.94 mN/m). This suggests that polar interaction at PTFE-aqueous solutions of surfactant mixtures can probably take place.

Alkanesulfonates↗
PubMed2002

Influence of drying and HEMA treatment on dentin wettability.

OBJECTIVES: The aim of this study was to evaluate the effect of drying time and primer pre-application (35% HEMA in water) on water spreading/infiltration on dentin. METHODS: Freshly extracted molars were embedded in resin and sectioned on their coronal side. Flat occlusal dentin surfaces were prepared using wet SiC paper from nos. 80-4000. A computerized contact angle device complementing a special software (Wingoutt) was used to measure the contact angle (theta) kinetics of a reference liquid (pure H(2)O) in the ten groups each of ten dentin surfaces during 120 s: Gp1: etched (37% phosphoric acid for 15 s) and blot-dried; Gp2: 3 s dried; Gp3: 5 s air-dried; Gp4: 10 s air-dried; Gp5: 20 s air-dried; Gp6: 30 s air-dried; Gp7: 1 min dried with hair dryer; Gp8: 5 s air-dried and HEMA treated; Gp9: 30 s air-dried followed by HEMA treatment; Gp10: HEMA treated prior to 30 s air-drying. three drops were applied on each sample. 40 contact angles were recorded for each drop with a frequency of one measure every 3 s. A one-way ANOVA test was used for data analysis. A PLSD test was conducted to identify statistical differences between pairs of groups at a reliability level of 95%. RESULTS: At each measurement time, air-drying, whatever its duration, significantly decreased the wetting ability of the pure water on the etched dentin in comparison with the blot-dried group. The contact angle increases with drying time. No significant differences in water contact angle were obtained between 3, 5 and 10 s in spite of a slight decrease in the spreading/infiltration ability of water the longer the drying time. HEMA increases the spreading/infiltration ability of water on 5 or 30 s air-dried etched dentin surfaces; 30 s air-drying did not alter the spreading/infiltration ability of the water on etched and HEMA treated dentin. SIGNIFICANCE: Dentin hydrophobicity increases depending on air-drying time. HEMA-based primer allows to prevent collagen collapse, which may be created by air-drying and partly rewet the collapsed collagen network.

Analysis of Variance↗