Search PubMed⌕ Search

SEARCH · Search PubMed

Results for “Poly T”

Search indexed PubMed citations on genomics, clinical trials, systematic reviews and public health. Explore titles, authors and supplied subject terms, then open the PubMed record.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 217 records · Page 12Linked to original sources
PubMed2006

Supramolecular hydrogels induced rapidly by inclusion complexation of poly(epsilon-caprolactone)-poly(ethylene glycol)-poly(epsilon-caprolactone) block copolymers with alpha-cyclodextrin in aqueous solutions.

On the basis of the synthesis of water-soluble poly(epsilon-caprolactone)-poly(ethylene glycol)-poly(epsilon-caprolactone) (PCL-PEG-PCL) block copolymers, the supramolecular hydrogels were fabricated rapidly in aqueous solutions by their inclusion complexation with alpha-cyclodextrin. X-ray diffraction (XRD) analyses confirmed the supramolecular self-assemblies of alpha-cyclodextrin threaded onto amphiphilic PCL-PEG-PCL block copolymers. The resulting hydrogels display a high degree of elasticity, with the storage modulus (G') greater than the loss modulus (G'') over the entire range of frequency. Moreover, their viscosity greatly diminished as they were sheared. By controlling the molecular weight of the PEG component in the block copolymers and the content of the block copolymer, their rheological properties could be modulated. Such hydrogel materials have the potential to be used as tissue engineered scaffolds, biosensors in the human body, and carriers for controlled drug delivery.

Journal Article↗
PubMed2006

Effect of acid on the aggregation of poly(ethylene xide)-poly(propylene oxide)-poly(ethylene oxide) block copolymers.

The acid effect on the aggregation of poly(ethylene oxide)-poly(propylene oxide)-poly(ethylene oxide) block copolymers EO(20)PO(70)EO(20) has been investigated by transmission electron microscopy (TEM), particle size analyzer (PSA), Fourier transformed infrared, and fluorescence spectroscopy. The critical micellization temperature for Pluronic P123 in different HCl aqueous solutions increases with the increase of acid concentration. Additionally, the hydrolysis degradation of PEO blocks is observed in strong acid concentrations at higher temperatures. When the acid concentration is low, TEM and PSA show the increase of the micelle mean diameter and the decrease of the micelle polydispersity at room temperature, which demonstrate the extension of EO corona and tendency of uniform micelle size because of the charge repulsion. When under strong acid conditions, the aggregation of micelles through the protonated water bridges was observed.

Epoxy Compounds↗
PubMed1998

An investigation of FB interactions with poly(ethylene glycol) 6000, poly(ethylene glycol) 4000, and poly-epsilon-caprolactone by thermoanalytical and spectroscopic methods and modeling.

The interactions between flurbiprofen (FB) and different polymers are studied in order to improve the bioavailability of FB. FB-polymer phase diagrams [poly(ethylene glycol) (PEG) 4000, PEG 6000, and poly-epsilon-caprolactone] were constructed and compared with the modeling diagrams. Thermoanalytical methods (differential scanning calorimetry, thermomicroscopy) were used to construct the phase diagrams. Thermodynamic data were used to model the FB-polymer systems. The construction of the FB-polymer phase diagrams showed the existence of a stable invariant called "eutectic" characterized by (XE)exp, (TfE)exp, and (DeltaHfE)exp, the experimental eutectic composition, the experimental temperature, and the enthalpy of eutectic melting, respectively. Modeling confirmed the values for these parameters and was used to evaluate the different Flory-Huggins parameters chi for each FB-polymer mixture. chi values and the infrared spectra confirm that the interactions due to hydrogen bonds between FB and PEG 4000 are more numerous than between FB and PEG 6000 and also more numerous than between FB and poly-epsilon-caprolactone.

Anti-Inflammatory Agents, Non-Steroidal↗
PubMed2004

Phase behavior of a mixture of poly(isoprene)-poly(oxyethylene) diblock copolymer and poly(oxyethylene) surfactant in water.

The phase behavior of a mixture of poly(isoprene)-poly(oxyethylene) diblock copolymer (PI-PEO or C250EO70) and poly(oxyethylene) surfactant (C12EO3, C12EO5, C12EO6, C12EO7, and C12EO9) in water was investigated by phase study, small-angle X-ray scattering, and dynamic light scattering (DLS). The copolymer is not soluble in surfactant micellar cubic (I1), hexagonal (H1), and lamellar (Lalpha) liquid crystals, whereas an isotropic copolymer fluid phase coexists with these liquid crystals. Although the PI-PEO is relatively lipophilic, it increases the cloud temperatures of C12EO3-9 aqueous solutions at a relatively high PI-PEO content in the mixture. Most probably, in the copolymer-rich region, PI-PEO and C12EOn form a spherical composite micelle in which surfactant molecules are located at the interface and the PI chains form an oil pool inside. In the C12EO5/ and C12EO6/PI-PEO systems, one kind of micelles is produced in the wide range of mixing fraction, although macroscopic phase separation was observed within a few days after the sample preparation. On the other hand, small surfactant micelles coexist with copolymer giant micelles in C12EO7/ and C12EO9/PI-PEO aqueous solutions in the surfactant-rich region. The micellar shape and size are calculated using simple geometrical relations and compared with DLS data. Consequently, a large PI-PEO molecule is not soluble in surfactant bilayers (Lalpha phase), infinitely long rod micelles (H1 phase), and spherical micelles (I1 phase or hydrophilic spherical micelles) as a result of the packing constraint of the large PI chain. However, the copolymer is soluble in surfactant rod micelles (C12EO5 and C12EO6) because a rod-sphere transition of the surfactant micelles takes place and the long PI chains are incorporated inside the large spherical micelles.

Journal Article↗
PubMed2005

Small-angle neutron scattering and theoretical investigation of poly(ethylene oxide)-poly(propylene oxide)-poly(ethylene oxide) stabilized oil-in-water microemulsions.

The aim of this study is to determine the effects of oil solutes and alcohol cosolvents on the structure of oil-in-water microemulsions stabilized by poly(ethylene oxide)-poly(propylene oxide)-poly(ethylene oxide) (PEO-PPO-PEO) triblock copolymers. The systems investigated involved the solubilization of 1,3,5-trimethylbenzene or 1,2-dichlorobenzene by P123 (EO(20)-PO(70)-EO(20)) pluronic surfactant micelles in water and water + ethanol solvents. The structures of these swollen micelles were determined by small-angle neutron scattering (SANS). A thermodynamic model was employed to interpret the characterization data. The results of the thermodynamic model for micellization agreed well with the SANS data from samples of micelles swollen by both oils. The model predicted the size of the micelles within 5% accuracy using only one fitting parameter, the micelle polydispersity. Ethanol had significantly different effects on the polymer micelles that contained solubilized oil compared to pure polymer micelles. For pure polymer micelles, the addition of ethanol increased the solubility of the polymer and, therefore, decreased the total volume fraction of micelles, while for polymer-oil aggregates, ethanol tended to have a positive effect on the volume fraction of micelles. SANS results showed that the greatest divergence from pure aqueous solvent results occurred at oil concentrations above the microemulsion stability limit.

Journal Article↗
PubMed2004

Morphological change of the micelle of poly(styrene)-b-poly(2-vinylpyridine)-b-poly(ethylene oxide) induced by binding of sodium dodecyl sulfate.

Morphological change of a micelle of poly(styrene)-b-poly(2-vinylpyridine)-b-poly(ethylene oxide) (PS-PVP-PEO) polymer was induced by binding sodium dodecyl sulfate (SDS) to the PVP block in acidic aqueous solutions. The change in the size of SDS/PS-PVP-PEO complexes was detected by dynamic light scattering measurements and atomic force microscopy, and the binding of SDS was confirmed by zeta-potential measurements. When the micelle was free from SDS in acidic aqueous solutions, the hydrodynamic diameter of the micelle was 216 nm, reflecting the extended conformation of the PVP block due to the repulsion between protonated pyridine units. As the cationic PVP block was electrically neutralized with anionic SDS, the diameter was gradually reduced concomitant with the decrease in zeta-potential and finally reached 175 nm when the PVP block was completely neutralized. The decrease in the diameter shows the morphological change of the PVP block from extended to shrunken forms. Further addition of SDS did not cause the changes of the diameter nor zeta-potential. This indicates that SDS was not bound to the PS-PVP-PEO polymer after the PVP block was fully neutralized and that the hydrophobic binding of SDS to the polymer was negligible due to the low concentration of SDS.

Journal Article↗
PubMed2006

Maghemite nanoparticles protectively coated with poly(ethylene imine) and poly(ethylene oxide)-block-poly(glutamic acid).

Superparamagnetic iron oxide particles (SPIO) of maghemite were prepared in aqueous solution and subsequently stabilized with polymers in two layer-by-layer deposition steps. The first layer around the maghemite core is formed by poly(ethylene imine) (PEI), and the second one is formed by poly(ethylene oxide)-block-poly(glutamic acid) (PEO-PGA). The hydrodynamic diameter of the particles increases stepwise from D(h) = 25 nm (parent) via 35 nm (PEI) to 46 nm (PEI plus PEO-PGA) due to stabilization. This is accompanied by a switching of their zeta-potentials from moderately positive (+28 mV) to highly positive (+50 mV) and finally slightly negative (-3 mV). By contrast, the polydispersity indexes of the particles remain constant (ca. 0.15). Mössbauer spectroscopy revealed that the iron oxide, which forms the core of the particles, is only present as Fe(III) in the form of superparamagnetic maghemite nanocrystals. The magnetic domains and the maghemite crystallites were found to be identical with a size of 12.0 +/- 0.5 nm. The coated maghemite nanoparticles were tested to be stable in water and in physiological salt solution for longer than 6 months. In contrast to novel methods for magnetic nanoparticle production, where organic solvents are necessary, the procedure proposed here can dispense with organic solvents. Magnetic resonance imaging (MRI) experiments on living rats indicate that the nanoparticles are useful as an MRI contrast agent.

Animals↗
PubMed2006

Effects of SDS on the thermo- and pH-sensitive structural changes of the poly(acrylic acid)-based copolymer containing both poly(N-isopropylacrylamide) and monomethoxy poly(ethylene glycol) grafts in water.

The effects of SDS on the structural changes of the thermally induced polymeric micelles from a graft copolymer comprising poly(acrylic acid) (PAAc) as the backbone and poly(N-isopropylacrylamide) (PNIPAAm) and monomethoxy poly(ethylene glycol) (mPEG) as the grafts in aqueous solution are studied. At low temperature, SDS micelles form via the hydrophobic association of SDS molecules with the PNIPAAm grafts at a critical aggregation concentration of SDS (cac(SDS)) much lower than its critical micelle concentration. Consequently, the critical aggregation temperature of the graft copolymer is elevated. The corresponding structure of the thermally induced polymeric micelles is characterized by an abrupt reduction in the particle size and an increased tendency toward formation of the monocore structure with a more compact and hydrophobic PNIPAAm microdomain being developed. On the other hand, upon the polymeric micelle formation at high temperature, the copolymer-bound SDS micelle structure is disrupted and the dissociated SDS molecules migrate to the core-shell interface with their alkyl chains residing in the liquidlike region of the hydrophobic PNIPAAm microdomain. The correlation between the polymeric particles and copolymer-bound micelles is further substantiated by showing the change of the colloidal particle size in response to changes in cac(SDS) via adjusting the pH of the aqueous copolymer/SDS solutions.

Journal Article↗
PubMed2006

Water-soluble hydrogen-bonding interpolymer complex formation between poly(ethylene glycol) and poly(acrylic acid) grafted with poly(2-acrylamido-2-methylpropanesulfonic acid).

Comb-type copolymers of poly(acrylic acid) grafted with poly(2-acrylamido-2-methylpropanesulfonic acid) (PAMPSA) side chains form with poly(ethylene glycol), at low pH, water-soluble hydrogen-bonding interpolymer complexes. Turbidimetry, viscometry, and dynamic light scattering measurements suggest that compact, negatively charged, colloidal nanoparticles are formed at pH<3.75. The influence of the structure of the graft copolymers and of the ionic strength of the solution on the size of these nanoparticles was investigated. It was found that their hydrodynamic radius decreases by increasing the molecular mass of the PAMPSA side chains of the graft copolymer and increases with increasing the ionic strength of the solution.

Journal Article↗
PubMed1998

Monitoring microviscosity and microacidity of the albumin microenvironment inside degrading microparticles from poly(lactide-co-glycolide) (PLG) or ABA-triblock polymers containing hydrophobic poly(lactide-co-glycolide) A blocks and hydrophilic poly(ethyleneoxide) B blocks.

PURPOSE: The purpose of this study was to monitor the microenvironment of an encapsulated model protein during the release from biodegradable microparticles (MP) made from three different polymers, namely poly(lactide-co-glycolide) (PLG) and ABA-triblock polymers containing hydrophobic poly(lactide-co-glycolide) A blocks and hydrophilic poly(ethyleneoxide) B blocks with an A:B ratio of 90:10 (ABA1O) and 70:30 (ABA30). METHODS: MP loaded with spin labeled albumin were prepared by a w/o/w technique. The particles were characterized by light scattering and electron microscopy. In vitro release of albumin was determined by size exclusion chromatography. Light microscopic experiments were conducted to visualize water penetration in the matrix. The protein microenvironment inside the degrading microparticles was characterized noninvasively by 2 GHz EPR spectroscopy. RESULTS: Water penetrated rapidly into all MP in the range of few minutes. A burst release was observed for PLG. The release from ABA block-polymers continued for over 14 days despite the rapid solubilization of the protein inside the microparticles. The initial microviscosity of the protein environment inside the ABA particles after exposure to buffer was 2 mm2/s and increased with time. A gradual decrease of the pH to a value of 3.5 was observed within the MP. CONCLUSIONS: The data indicate that the microviscosity and microacidity inside protein loaded microparticles can be studied nondestructively by EPR spectroscopy. Our results clearly demonstrate that ABA-block polymers are superior to PLG allowing a controlled release of proteins from swollen microspheres.

Albumins↗
PubMed1996

Improving protein delivery from microparticles using blends of poly(DL lactide co-glycolide) and poly(ethylene oxide)-poly(propylene oxide) copolymers.

PURPOSE: Microparticles containing ovalbumin as a model for protein drugs were formulated from blends of poly(DL lactide-co-glycolide) and poly(ethylene oxide)-poly(propylene oxide) copolymers (Pluronic). The objectives were to achieve uniform release characteristics and improved protein delivery capacity. METHODS: The water- in oil -in oil emulsion/solvent extraction technique was used for microparticle production. RESULTS: A protein loading level of over 40% (w/w) was attained in microparticles having a mean diameter of approximately 5 microns. Linear protein release profiles over 25 days in vitro were exhibited by certain blend formulations incorporating hydrophilic Pluronic F127. The release profile tended to plateau after 10 days when the more hydrophobic Pluronic L121 copolymer was used to prepare microparticles. A delivery capacity of 3 micrograms OVA/mg particles/ day was achieved by formulation of microparticles using a 1:2 blend of PLG:Pluronic F127. CONCLUSIONS: The w/o/o formulation approach in combination with PLG:Pluronic blends shows potential for improving the delivery of therapeutic proteins and peptides from microparticulate systems. Novel vaccine formulations are also feasible by incorporation of Pluronic L121 in the microparticles as a co-adjuvant.

Chemistry, Pharmaceutical↗
PubMed1980

Efficient genetically controlled formation of antibody to a synthetic antigen [poly(LTyr, LGlu)-poly(DLAla)- -poly(LLys)] covalently bound to a synthetic adjuvant (N-acetylmuramyl-L-alanyl-D-isoglutamine).

The synthetic polypeptide antigen poly(LTyr, LGlu)-poly(DLAl)- -poly(LLys)[T,G)-A- -L] was covalently linked to N-acetylmuramyl-L-alanyl-D-isoglutamine (MDP), which is the minimal adjuvant-active structure that can substitute for Mycobacteria in complete Freund's adjuvant. When injected in aqueous solution into mice, the completely synthetic conjugate elicited significant antibody responses specific to (T,G)-A- -L, whereas (T,G,)-A- -L alone administered under the same conditions did not lead to antibody production. The conjugate was much more efficient in eliciting (T,G)-A- -L responses than was a mixture of DMP and (T,G)-A- -L. One hundred micrograms of MDP mixed with 10 micrograms of (T,G)-A- -L resulted in production of (T,g)-A- -L-specific antibodies. However, the titers obtained were much lower than those observed with 10 micrograms of the conjugate, MDP-(T,G)-A- -L, which contained less than 1 microgram of MDP. MDP was enhanced when the mixture was administered in incomplete Freund's adjuvant, the adjuvant did not significantly affect the (T,G)-A- -L-specific antibody responses in mice immunized with MDP-(T,G)-A- -L. The isoelectric focusing pattern of antibodies obtained with MDP-(T,G)-A- -L was similar to that obtained after immunization with (T,G)-A- -L in complete Freund's adjuvant. The pattern of high-responder and low-responder mice to (T,G)-A- -L, the immune response to which is genetically controlled, was retained when MDP-(T,G)-A- -L was used as the immunogen. Conjugation of (T,G)-A- -L was creased the immunogenicity of MDP and affected its biological properties. It is thus possible to obtain efficient immune responses to synthetic polypeptide antigens that produce poor reactions when injected in aqueous solution by conjugating them to small molecular weight synthetic adjuvants.

Acetylmuramyl-Alanyl-Isoglutamine↗
PubMed1981

Functional helper activity of monoclonal T cell populations: antigen-specific and H-2 restricted cloned T cells provide help for in vitro antibody responses to trinitrophenyl-poly(LTyr,Glu)-poly(DLAla)--poly(LLys).

The ability of long-term cultured and monoclonal T cell populations to provide antigen-specific help was assessed in a system of Ir gene-controlled in vitro antibody responses to soluble antigens. T-cell colonies and monoclonal T-cell lines were generated which proliferated specifically in response to poly(LTyr,Glu)-poly(DLAla)--poly(LLys) [(T,G)-A--L] and were I-A restricted in these proliferative responses. These (T,G)-A--L-specific T-cell populations were evaluated for their ability to help unprimed and T-cell depleted spleen cell populations in the generation of antibody responses to trinitrophenyl (TNP)-(T,G)-A--L in vitro. It was found that long-term T-cell lines, including monoclonal T-cell populations derived by limiting dilution, were highly efficient helper cells for IgM responses to TNP-(T,G)-A--L. These helper T cells were both antigen-specific and I-A restricted in their ability to be activated and to cooperate with T-cell depleted spleen cell populations. Once specifically activated, however, these clones provided help that was antigen nonspecific. These studies have thus demonstrated the ability of antigen-specific and H-2-restricted monoclonal T-cell populations to provide help for responses to soluble antigens in vitro.

Animals↗
PubMed1981

Immune response potential to poly(Tyr,Glu)-poly(DLAla)--poly(Lys) of human T cells of different donors.

Human peripheral blood T cells of normal donors were activated in vitro with autologous adherent cells pulsed with poly(LTyr,LGlu)-poly(DLAla)--poly(LLys) [abbreviated (T,G)-A--L]. The "educated" T cells were tested: (i) for their ability to produce a (T,G)-A--L-specific T cell-replacing factor in the cooperation with B cells for antibody responses in vivo or in vitro and (ii) for their ability to proliferate in the presence of a second stimulus of (T,G)-A--L. Results of screening of 66 donors demonstrated that educated T cells of about 50% of the donors produced an active (T,G)-A--L-specific factor, whereas activated cells of only half of the factor producers were capable of proliferating in the presence of the antigen. Thus, as reported for all other species studied, human individuals differ in their response potential to (T,G)-A--L.

Antibody Formation↗
PubMed1984

Genetic control of major histocompatibility complex-linked immune responses to synthetic polypeptides in man: poly(L-phenylalanine, L-glutamic acid)-poly (DL-alanine)--poly(L-lysine) and L-glutamic acid, L-alanine, L-tyrosine (60:30:10).

Vigorous lymphoproliferative responses to synthetic polypeptides poly(L-phenylalanine, L-glutamic acid)-poly(DL-alanine)--poly(L-lysine) [( Phe,G)-A--L], and L-glutamic acid, L-alanine, L-tyrosine (60:30:10) (GAT) were observed in cells from 92 unrelated subjects. Thirty-three percent responded to (Phe,G)-A--L and 77% to GAT. No HLA association was observed with responses to these two antigens. Family studies indicated that two complementary immune response (Ir) genes are required for response to each antigen. Eleven matings were informative for linkage analysis between HLA and these Ir genes. Families in which the complementary genes are in coupling gave maximal lod scores (log of the odds) of 4.50 for (Phe,G)-A--L and 7.57 for GAT for 0 = 0. In a HLA-B/D recombinant family, the Ir- PheGAL genes are mapped towards the HLA-D region. The localization of Ir-GAT genes close to HLA-B was provided by a HLA-A/B recombinant.

Genes, MHC Class II↗
PubMed1972

Genetic control of the immune response. The effect of thymectomy on the primary and secondary antibody response of mice to poly-L(tyr, glu)-poly-D, L-ala--poly-L-lys.

The effect of thymectomy on the genetically controlled murine immune response-1 (Ir-1) to the synthetic polypeptide poly-L(Tyr, Glu)-poly-D, L-Ala--poly-L-Lys [(T, G)-A--L] was studied with both aqueous and adjuvant immunization regimens. Adult thymectomy (combined with irradiation and bone marrow transfusion) did not affect the aqueous antigen-induced (IgM) primary response of either high or low responder mice, but did ablate the (IgG) secondary or tertiary response, a response which is restricted to the high responder strains. Adult thymectomy also blocked the normal high response to (T,G)-A--L in Freund's adjuvant in high responder mice and the high response to methylated bovine serum albumin (MBSA)-(T,G)-A--L in low responder mice. Neonatal thymectomy was also effective in blocking the response to (T, G)-A--L in Freund's adjuvant in high responder mice. These data are consistent with the concept that the Ir-1 gene effect is mediated via thymus cell interaction with antigen and with "B"-cells during the time of induction of IgG antibody formation.

Adjuvants, Immunologic↗
PubMed1972

Genetic control of the immune response. The effect of graft-versus-host reaction on the antibody response to poly-L(Tyr, Glu)-poly-D,L-Ala--poly-L-Lys in nonresponder mice.

The transfer of parental (H-2(k/k)) nonresponder lymphoid cells into heterozygous (H-2(k/q)) nonresponder recipients at the time of primary challenge with aqueous poly-L(Tyr,Glu)-poly-D,L-Ala-poly-L-Lys [(T,G)-A--L] elicited the production of both IgM and IgG anti-(T,G)-A--L antibody. Normally, the production of IgG anti-(T,G)-A--L antibody is restricted to strains possessing the responder Ir-1 allele. The timing and intensity of the graft-versus-host (GVH) reaction required for this effect were found to be critical. Injection of H-2(k/k) cells into H-2(k/q) recipients 1 wk before antigen challenge did not elicit IgG anti-(T,G)-A--L antibody production, and markedly suppressed IgM anti-(T,G)-A--L antibody production. The transfer of alloimmune (H-2(q)-primed) H-2(k/k) cells at the time of antigen challenge was also associated with no IgG and little IgM anti-(T,G)-A--L antibody production. These data are consistent with the model that nonresponder thymus-derived lymphocytes (T cells) activated in a GVH reaction can substitute for (T,G)-A--L-reactive T cells to induce a shift from IgM to IgG anti-(T,G)-A--L antibody production.

Amino Acid Sequence↗
PubMed1974

Antigen-specific thymus cell factors in the genetic control of the immune response to poly-(tyrosyl, glutamyl)-poly-D, L-alanyl--poly-lysyl.

The genetic control of the antibody response to a synthetic polypeptide antigen designated poly-L(Tyr, Glu)-poly-D,L-Ala--poly-L-Lys [(T, G)-A--L] has been studied in congenic high responder C3H.SW (H-2(b)) and low responder C3H/HeJ (H-2(k)) strains of mice. This response is controlled by the Ir-1 gene and is H-2 linked. The method employed was to study the ability of specifically primed or "educated" T cells of each strain to produce cooperative factors for (T, G)-A--L in vitro. Such factors have been shown to be capable of replacing the requirement for T cells in the thymus-dependent antibody response to (T, G)-A--L in vivo. The T-cell factors produced were tested for their ability to cooperate with B cells of either high or low responder origin by transfer together with bone marrow cells and (T, G)-A--L into heavily irradiated, syngeneic (for bone marrow donor) recipients. Direct anti-(T, G)-A--L plaque-forming cells were measured later in the spleens of the recipients. The results showed that (a) educated T cells of both high and low responder origin produced active cooperative factors to (T, G)-A--L, and no differences between the strains in respect to production of T-cell factors could be demonstrated; and (b) such factors, whether of high or low responder origin, cooperated efficiently with B cells of high responder origin only, and hardly at all with B cells of low responder origin. The conclusion was drawn that the cellular difference between the two strains lies in the responsiveness of their B cells to specific signals or stimuli received from T cells. As far as could be discerned by the methods used, no T-cell defect existed in low responder mice and the expression of the controlling Ir-1 gene was solely at the level of the B cells in this case.

Alanine↗