SEARCH · Search PubMed

Results for “PRINTING”

Search indexed PubMed citations on genomics, clinical trials, systematic reviews and public health. Explore titles, authors and supplied subject terms, then open the PubMed record.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 217 records · Page 12Linked to original sources

PubMed1990

Chromosome aberrations in rotogravure printing plant workers.

Chromosome analysis was carried out in peripheral lymphocytes of 3 groups of workers. In 42 rotogravure printers exposed to rotogravure printing dyes and highly purified toluene at working air concentrations in the range of 104-1170 ppm (390-4380 mg/m3) for 13 years on average, an increased incidence of aberrant cells and chromatid breaks was observed. In 28 office and technical employees of the same plant, more than half of whom worked 2 h daily in the rotogravure workshop, an increased percentage of aberrant cells and chromatid breaks was also found. The difference between the 2 groups working in the printing plant and 32 controls was highly significant. The high incidence of aberrations could be explained by the exposure to toluene, but the influence of rotogravure printing dyes cannot be excluded. Smoking and high air pollution in the urban area were contributing factors in all 3 groups.

Adult↗

PubMed2005

An amperometric glucose biosensor prototype fabricated by thermal inkjet printing.

The prototype of an amperometric glucose biosensor was realized by thermal inkjet printing using biological and electronic water-based inks, containing a glucose oxidase (GOD) from Aspergillus niger and the conducting polymer blend poly(3,4-ethylenedioxythiophene/polystyrene sulfonic acid) (PEDOT/PSS), respectively. The biosensor was fabricated microdepositing PEDOT/PSS and GOD, in sequence, on ITO-glass, by a commercial inkjet printer, with the help of a commercial software. High density microdots matrices were so-realized, with a calculated resolution of about 221 x 221 dpi (dot per inch). By means of a rapid and easy assay it was demonstrated that no activity loss occurred upon the printing of GOD, despite of the use of a thermal printhead. The device was encapsulated in a semipermeable membrane of cellulose acetate, applied by dip-coating, in order to prevent dissolution of the enzyme and/or PEDOT/PSS in water. The preliminary response of the electrode was measured in an aqueous glucose solution in the presence of ferrocenemethanol (FeMeOH) as a mediator, and resulted linear up to 60 mM in glucose. The best sensitivity value achieved was 6.43 microAM(-1) cm(-2) (447 nAM(-1) U(-1) cm(-2)). The characteristics of the device, and the possible performance improvements have been analyzed and discussed. The reported findings indicate that inkjet printing could be a viable instrument for the easy construction of a working biosensor via direct digital design using biological and conductive polymer based inks. Such an approach may be seen as an example of "biopolytronics".

Aspergillus niger↗

PubMed2005

Fabricating optical fiber imaging sensors using ink jet printing technology: a pH sensor proof-of-concept.

We demonstrate the feasibility of using Drop-on-Demand microjet printing technology for fabricating imaging sensors by reproducibly printing an array of photo-polymerizable sensing elements, containing a pH sensitive indicator, on the surface of an optical fiber image guide. The reproducibility of the microjet printing process is excellent for microdot (i.e. micrometer-sized polymer) sensor diameter (92.2+/-2.2 microm), height (35.0+/-1.0 microm), and roundness (0.00072+/-0.00023). pH sensors were evaluated in terms of pH sensing ability (< or =2% sensor variation), response time, and hysteresis using a custom fluorescence imaging system. In addition, the microjet technique has distinct advantages over other fabrication methods, which are discussed in detail.

Biosensing Techniques↗

PubMed2004

A fast flexible ink-jet printing method for patterning dissociated neurons in culture.

We present a new technique that uses a custom-built ink-jet printer to fabricate precise micropatterns of cell adhesion materials for neural cell culture. Other work in neural cell patterning has employed photolithography or "soft lithographic" techniques such as micro-stamping, but such approaches are limited by their use of an un-alterable master pattern such as a mask or stamp master and can be resource-intensive. In contrast, ink-jet printing, used in low-cost desktop printers, patterns material by depositing microscopic droplets under robotic control in a programmable and inexpensive manner. We report the use of ink-jet printing to fabricate neuron-adhesive patterns such as islands and other shapes using poly(ethylene) glycol as the cell-repulsive material and a collagen/poly-D-lysine (PDL) mixture as the cell-adhesive material. We show that dissociated rat hippocampal neurons and glia grown at low densities on such patterns retain strong pattern adherence for over 25 days. The patterned neurons are comparable to control, un-patterned cells in electrophysiological properties and in immunocytochemical measurements of synaptic density and inhibitory cell distributions. We suggest that an inexpensive desktop printer may be an accessible tool for making micro-island cultures and other basic patterns. We also suggest that ink-jet printing may be extended to a range of developmental neuroscience studies, given its ability to more easily layer materials, build substrate-bound gradients, construct out-of-plane structure, and deposit sources of diffusible factors.

Animals↗

PubMed2004

Microcontact printing of DNA molecules.

The controlled placement of DNA molecules onto solid surfaces is the first step in the fabrication of DNA arrays. The sequential deposition of tiny drops containing the probe DNA fragments using arrays of spotting needles or ink jet nozzles has become a standard. However, a caveat of liquid spotting is the drying of the deposited drop because this creates the typical inhomogeneities, i.e., rims around the spot. Another drawback is that each DNA array is an original and has to be fabricated individually. Microcontact printing is a versatile technique to place proteins onto different target surfaces in uniformly patterned monolayers with high lateral resolution. Here, we show for the first time that DNA can also be printed with equally high resolution in the submicrometer range using an elastomeric stamp with chemically tailored surface. Two regimes for the transfer of the molecules were observed. Finally, microcontact printing of an array of DNA probes onto a solid support and its use in a subsequent hybridization assay was demonstrated.

Adsorption↗

PubMed2005

Rapid method for design and fabrication of passive micromixers in microfluidic devices using a direct-printing process.

We developed a facile and rapid one-step technique for design and fabrication of passive micromixers in microfluidic devices using a direct-printing process. A laser printing mechanism was dexterously adopted to pattern the microchannels with different gray levels using vector graphic software. With the present method, periodically ordered specific bas-relief microstructures can be easily fabricated on transparencies by a simple printing process. The size and shape of the resultant microstructures are determined by the gray level of the graphic software and the resolution of the laser printer. Patterns of specific bas-relief microstructures on the floor of a channel act as obstacles in the flow path for advection mixing, which can be used as efficient mixing elements. The mixing effect of the resultant micromixer in microfluidic devices was evaluated using CCD fluorescence spectroscopy. We found that the mixing performance depends strongly on the gray level values. Under optimal conditions, fast passive mixing with our periodic ordered patterns in microfluidic devices has been achieved at the very early stages of the laminar flow. In addition, fabrication of micromixers using the present versatile technique requires less than an hour. The present method is promising for fabrication of micromixers in microfluidic devices at low cost and without complicated devices and environment, providing a simple solution to mixing problems in the micro-total-analysis-systems field.

Biomedical Technology↗

PubMed2002

Monitoring of taints related to printed solid boards with an electronic nose.

The main objectives were to combine knowledge gathered from the electronic nose (EN) with traditional analytical reference methods for measuring volatile compounds, such as sensory and headspace methods. The impacts of different colouring agents on the sensory properties of packaging materials when analysed by EN were determined. The first step in investigations using the EN was optimization of sample treatment and analysis parameters for the samples. The best resolution was achieved at 60 degrees C in 20 min, and the effect of humidity on the EN sensors was confirmed. A comparison was made of three sensory methods for analysing taints of packaging materials. The study showed that the odour of the packaging itself was often not a reliable indication of the taint perceived in the packed foodstuff and should be regarded only as indicative. Taints caused by pigments of printed solid boards were analysed by EN. Twenty samples were studied, representing unprinted solid board, lacquered solid board, offset printed solid board with 14 different colours and offset printed, lacquered solid board with four colours. The EN succeeded in grouping these materials according to their colouring agents or lacquering, despite slight overlapping of replicates, and the results appeared to reflect at least to some extent the off-flavours perceived in sensory evaluation. The results of this study are only indicative, because the analysis of results from different sources or equipment requires more extensive use of statistical methods.

Biosensing Techniques↗

PubMedDate not supplied

Plasticizers from printing inks in a selection of food packagings and their migration to food.

A survey of plasticizers in printing inks present in a selection of food packaging including confectionery, snacks, crisps, potatoes, chocolate bars and biscuits, has been carried out both in England and Spain. The identification of the polymer used as packaging showed that almost all of them were oriented polypropylene. Printing inks that are always used on the outer surface contain phthalates as major plasticizers, N-ethyl- and N-methyl-toluenesulphonamides and tris(2-ethylhexyl)trimellitate were found in some of the samples studied. Several food samples were also analysed to check the level of plasticizers migrating from printing inks.

Data Collection↗

PubMed1995

VOC emission rates and emission factors for a sheetfed offset printing shop.

Emission rates were determined during production for a sheetfed offset printing shop by combining the measured concentrations and ventilation rates with mass balance models that characterized the printing space. Air samples were collected simultaneously on charcoal tubes for 12 separate 1-hour periods at 6 locations. Air samples and cleaning solvents were analyzed by gas chromatography for total volatile organic compounds (VOC) and 13 hydrocarbons. The average VOC emission rate was 470 g/hr with a range of 160-1100 g/hr. These values were in good agreement with the amounts of VOC, hexane, toluene, and aromatic C9s determined from estimated solvent usage and measured solvent compositions. Comparison of the emission rates with source activities indicated an emission factor of 30-51 g VOC/press cleaning. Based on the test observations it was estimated that this typical small printing facility was likely to release 1-2 T VOC/year. The methodology also may be useful for the surface coating industry, as emission rates in this study were determined without recourse to a temporary total enclosure and without interfering with worker activities, increasing worker exposure, or increasing safety and explosion hazards.

Air Pollutants, Occupational↗

PubMed1986

Contact dermatitis in printing tradesmen.

During a 2-year period in Toronto, Canada, 21 printing tradesmen with contact dermatitis were evaluated. 67% had allergic contact dermatitis; 29% due to ultraviolet-cured ink components. Irritant contact dermatitis accounted for 37% of the cases. The prognosis in printing tradesmen with contact dermatitis is guarded, except for those with allergic contact dermatitis due to UV-cured components, as the tradesmen who were sensitized to other contactants eventually left the trade. Offset lithography was associated with the problem in 18 of the 21 cases. A brief outline is given of the printing processes in common use.

Dermatitis, Contact↗

PubMed1998

A medieval scientific encyclopedia "renewed by goodly printing"; Wynkyn de Worde's English De proprietatibus rerum.

Wynkyn de Worde published c. 1495 the first printed edition of John Trevisa's English translation of an influential work of science composed by Bartholomew the Englishman in Latin in the thirteenth century, De Proprietatibus Rerum (DPR). The design of the Worde's book, the use of Latin in the rubrics, and the visual vocabulary of the illustrations bring readers of English into the circle of learning. First, the plan of organization of Bartholomew's encyclopedic work is analyzed and both that structure and the expository style of the work are related to memorial reading and use as a textbook. Next, the widespread use of DPR in Latin and vernacular languages is reviewed, the suggestion that certain of its books seem to have been used more than others is made, and the reliance of English readers, such as Roger Thorney, who commissioned de Worde's edition, on de Worde for learned books printed in their provincial tongue is pointed out. Finally, through comparison with certain manuscript and other printed editions, the methods de Worde used to make the book readable are explained, the layout is shown to support the idea of system, and the function of the pictures as visual texts carrying scientific ideas is demonstrated.

Encyclopedias as Topic↗

PubMedDate not supplied

A preliminary investigation into the development of 3-D printing of prosthetic sockets.

The socket is considered an element of major importance in the makeup of a prosthesis. Each socket is a tailor-made device, designed to fit the unique geometry of the patient's residual limb. The design and manufacture of a prosthetic socket traditionally has been a manual process that relies on the use of plaster of Paris casts to capture the shape of the patient's residual limb and then artisan fabrication techniques to manufacture the socket. Computer-aided design and manufacturing technologies have overcome some of the shortcomings of the traditional process, but the final manufacture of the prosthetic socket is still performed manually. Rapid prototyping (RP), a relatively new class of manufacturing technologies, creates physical models directly from three-dimensional (3-D) computer data. Previous research into the application of RP systems to the manufacture of prosthetic sockets has focused on expensive, high-end technologies that have proven too expensive. This paper investigates the use of a cheaper, low-end RP technology known as 3-D printing. Our investigation was an initial approach to using a technology that is normally associated with producing prototypes quickly, some of which could not be manufactured by alternative means. Under normal circumstances, these printed components are weak and relatively fragile. However, comfortable prosthetic sockets manufactured with 3-D printing have been used in preliminary fittings with patients.

Amputation Stumps↗

PubMed2005

Cancer in the Norwegian printing industry.

OBJECTIVES: The aim of this study was to investigate cancer risk among Norwegian workers in the printing industry, particularly lung and bladder cancer. METHODS: Cancer incidence was investigated from 1953 through 1998 in a cohort of 10 549 male members of a trade union in the printing industry in Oslo and nearby areas. Rates from the region, were used to calculate standardized incidence ratios (SIR) separately for the skilled and unskilled workers. Smoking data from a sample of the cohort were utilized for evaluating the risk estimates of smoking-related cancers. Specific exposure data were not available. RESULTS: Among the skilled workers, significantly elevated risks of cancer of the urinary bladder [standardized incidence ratio (SIR) 1.47, 95% confidence interval (95% CI) 1.19-1.79], liver (SIR 1.92, 95% CI 1.15-2.99), pancreas (SIR 1.46, 95% CI 1.07-1.94) and colon (SIR 1.27, 95% CI 1.05-1.55) were observed, whereas an increased risk of lung cancer in this group was confined to those born before 1910. Among the unskilled workers, there were significantly increased risks of cancer of the mouth, esophagus, stomach, larynx, lung, and all sites. CONCLUSIONS: The study showed that workers in the printing industry were at increased risk of several types of cancer. In particular the increased risk of bladder cancer among the skilled workers is suggestive of an occupational cause. However, no specific agent could be identified as an occupational carcinogen. The results did not support the hypothesis of a generally increased risk of lung cancer. The risk pattern for unskilled workers may reflect confounding by nonoccupational factors.

Aged↗

PubMed1999

Personal opinion on the date of first printing of Jing yue quan shu (Jingyue's Complete Book).

Generally, the date of the first printing is based on the description, "Introduction to the Complete Book", in the postscript written by his grandson Lin Riwei, saying that "in the year of Gengchen (1) brought (my draft) to eastern Guangdong to tell the Fangbo master Lu... (who) donated his salary for the printing which lasted for several months". By Fangbo, it is another name for the position of Buzhengsi (Provincial administrative commissioner). Here, it refers to Lu Chao, by then the commissioner of Guangdong. In the Chronicle of Qing Officials, it is recorded that Lu Chao was in charge of Guangdong provincial commissioner in the year 37-40 of Kangxi reign (1688-1671). Together with other reference data, I draw the conclusion that Jingyue's Complete Book should be first printed in the year 1700.

China↗

PubMed2002

[Design of print out function for a multi-parameter patient monitor].

This paper describes the design of the printing output function for a multi-parameter patient monitor by using the graphic plot function of a Laser Printer. The ECG data are preprocessed with a notch filter and interpolation algorithm. A logical page is constructed in the extended memory for virtual page printing. This monitor is able to output a satisfied printing with ECG waveforms of high quality.

Computer Graphics↗

PubMed1990

[Chromosome aberrations in workers in a printing press].

Using cytogenetic analysis of peripheral lymphocytes the authors examined three groups of subjects: 42 rotogravure printers exposed to toluene in concentrations of 400-4400 mg.m-3 for a mean period of 13 years, 28 administrative employees of the printing plant exposed to low concentrations of toluene (8-16 mg.m-3) in their offices, whereby more than half of them spent on average two hours in the photogravure workshop, and 32 control subjects. In the printers 3.64% subjects, in the office staff 3.32% aberrant cells were found. The difference between the control group and the two groups from the printing plant was highly significant as regards the number of aberrant cells (P less than 0.005) and chromatid breaks and number of breaks per cell. The higher frequency of aberrant cells in probably associated with exposure to toluene, gravure printing dyes and in all three groups also with the highly contaminated communal atmosphere.

Adult↗

PubMed1972

The advent of printing as an obstacle to the development of rational medicine.

At the time that printing came onto the scene in western Europe in the mid-1400s, the medical community was struggling in the depths of superstition, and little rational medicine was being practiced. With this new invention, a flood of ancient, outmoded texts was released upon the public, and eager readers frequently were unaware that books they were being sold as new works were actually in some cases a thousand years old. Added to this was the fact that the appearance in print of this irrational material lent credibility and authoritativeness to unscientific writings. Thus, in contrast to many other fields which were immeasurably helped by the advent of the printed book, rational medicine was in fact held back and prevented from developing for at least a full century. It was not until the Renaissance was well under way that important original contributions by such towering figures as Vesalius supplanted these worthless repetitions of ancient superstitions.

Europe↗

PubMed1993

Investigation of hematuria at a printing company.

An investigation was undertaken at a printing company into an apparently high prevalence of trace dipstick hematuria discovered during routine medical examinations. In both the printing employees (n = 225) and a control group (n = 118) from other industries, the prevalence of hematuria exceeded that described in most previous reports (31% and 25%, respectively, using the criterion of > 12 glomerular red cells or > 2 nonglomerular red cells/microliter of urine). No focus of abnormality was identified within the printing plant and no association was identified between reported exposure to potentially toxic substances and the degree of hematuria. An occupational hygiene inspection and medical follow-up of selected workers did not reveal any significant abnormalities. The limitations of available information concerning "normal" urinalysis results suggests that hematuria may not be a useful test for the screening of occupational groups at risk of bladder cancer.

Adolescent↗