Search PubMed⌕ Search

SEARCH · Search PubMed

Results for “Epichlorohydrin”

Search indexed PubMed citations on genomics, clinical trials, systematic reviews and public health. Explore titles, authors and supplied subject terms, then open the PubMed record.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 217 records · Page 12Linked to original sources

Bioreactor applications of glucose oxidase covalently bonded on pHEMA membranes.

Glucose oxidase was immobilized onto poly(2-hydroxyethyl methacrylate) membranes by covalent bonding through epichlorohydrin. The highest immobilization efficiency was found to be 17.4%. The Km values were 5.9 and 8.8 mM for free and bound enzymes, respectively, and the Vmax values were 0.071 and 0.067 mM/min for free and bound enzymes. When the medium was saturated with oxygen Km was not altered significantly but Vmax was. The optimum pHs for the free and bound enzyme were determined to be 5 and 6, respectively, and the optimum temperature was 30 degrees C for both forms. The inactivation constant for the bound enzyme was found to be 1.7 x 10(-4) min-1.

Enzymes, Immobilized↗

An in vitro chromosome assay using cultured rat-liver cells.

An in vitro chromosome assay has been developed which utilises an epithelial-like cell line derived from rat liver. The cell line, designed RL1, retains sufficient metabolic enzyme activity to detect chromosome damage induced by a variety of chemical mutagens and carcinogens without the incorporation of an extrinsic metabolising system. The cells are grown on standard glass microscope slides, exposed to the test chemical and processed in situ for metaphase analysis. In a small validation study, chromosome damage was detected in cultures exposed to the direct-acting agents, methyl nitronitrosoguanine, 4-nitroquinoline-N-oxide, propylene oxide, epichlorohydrin and 1,2:3,4-diepoxybutane and to compounds requiring metabolic activation, including cyclophosphamide, 2-acetylaminofluorene, 3-methylcholanthrene and 7,12-dimethylbenz[a]anthracene. Negative results were obtained with pyrene and carbon tetrachloride.

4-Nitroquinoline-1-oxide↗

Micronucleated reticulocyte induction by ethylating agents in mice.

Six model ethylating agents were tested for clastogenic potency by means of a new technique of the micronucleus assay with mouse peripheral blood cells using acridine orange (AO)-coated slides, to evaluate the test. The alkylating agents were: N-ethyl-N'-nitro-N-nitrosoguanidine (ENNG), N-ethyl-N-nitrosourea (ENU), diethylsulfate (DES), ethyl methanesulfonate (EMS), epichlorohydrin (ECH) and ethylene dibromide (EDB). The animals were given a single intraperitoneal injection of the following doses of the chemicals: ENNG and ENU, 25, 50 and 100 mg/kg; EMS and DES, 100, 200 and 400 mg/kg body weight. For EDB and ECH, the doses were 50, 100 and 200 mg/kg, given twice, 24 h apart. Before and after the injection, blood samples were taken from the tails at 24-h intervals up to 72 h and preparations were made on AO-coated slides. For each dose group, 4 animals were used and 1000 reticulocytes were examined per slide for the presence of micronuclei. At the optimum induction time of 48 h, ENU induced micronucleated reticulocytes (MNRETs) at all 3 doses. ENNG and EMS induced MNRETs significantly at 2 dose levels each and DES only at the highest dose. ECH and EDB failed to induce MNRETs. On the basis of the dose of chemical needed to double the spontaneous frequency, the order of clastogenic potency was ENU greater than ENNG greater than EMS greater than DES. The results obtained compared favorably with those from other in vivo methods. The present technique proves to be simple, flexible and relatively sensitive. Shifts in the optimum induction peak in individual animals and by some chemicals can be picked up easily which is important when testing weak mutagens and chemicals with an unknown mechanism of action.

Alkylating Agents↗

Mutagenic activity of some clastogenic chemicals at the hypoxanthine guanine phosphoribosyl transferase locus of Chinese hamster ovary cells.

4 presumptive clastogens (caffeine, dimethyl sulfoxide, diethylstilbestrol and p,p'-DDE) and 4 chemicals thought to induce chromosomal mutations in L5178Y mouse lymphoma cells (procarbazine X HCl, epichlorohydrin, hycanthone and iodomethane) were tested in the CHO/HGPRT gene mutation assay for the induction of 6-thioguanine-resistant ( 6TGR ) mutants. Of the clastogens, p,p'-DDE was mutagenic at several concentrations and diethylstilbestrol (DES) increased the 6TGR mutant frequency over control levels at the 6.7 and 8.0 micrograms/ml doses, but the results for DES were neither convincing nor significant. Caffeine was not mutagenic although at very high concentrations (6667-8000 micrograms/ml) there was a slight elevation in mutant frequency over background. This was probably due to a selective effect of caffeine against the HGPRT+ phenotype, for 2 different HGPRT- cell lines were refractory to the toxic effects of caffeine at the highest test level (8000 micrograms/ml). All 4 'chromosomal mutagens' produced dose-related increases in mutant frequencies at the HGPRT locus of these CHO cells. 6TGR colonies were generally uniform in size when normal precautions were taken to prevent the formation of satellite (secondary) colonies. Excepting DES, dimethyl sulfoxide, and caffeine, these data demonstrate that 5 of 8 clastogenic chemicals reproducibly induce mutations at the HGPRT locus of CHO cells which lack the small colony-forming potential of 3.7.2C L5178Y cells.

Animals↗

Sensory irritation potential of selected nasal tumorigens in the rat.

Several important chemicals, including formaldehyde, 1,4-dichloro-2-butene, bis-chloromethyl ether, hexamethylphosphoramide, and epichlorohydrin have been shown to produce nasal tumours in rats following repeated or continuous inhalation exposures. Some of these compounds are respiratory irritants. To determine whether there is a correlation between the ability of a chemical to produce sensory irritation and to elicit nasal tumours, the atmospheric concentration causing a 50% decrease in the respiratory rate (RD50) of male rats was determined. Three other nasal tumorigens, dimethylcarbamoyl chloride, 2,3,4-trichloro-1-butene and 1,2-ethoxy-3-phenoxypropane, were also studied. No correlation between sensory irritation potency and nasal tumorigenic potential was observed. The most potent nasal tumorigen hexamethylphosphoramide, which produces tumours in rats following 12 months' continuous exposure to 50 ppb, failed to cause any decrease in respiratory rate when tested at 351 ppm (an aerosol exposure level which exceeds atmospheric saturation by approximately ten times).

Animals↗

Sorption of cadmium from aqueous solution using pretreated rice husk.

The sorption of Cd(II) from aqueous solution by rice husk, a surplus agricultural byproduct was investigated. Some simple and low-cost chemical modifications resulted in increasing the sorption capacity of raw rice husk (RRH) from 8.58 mg/g to 11.12, 20.24, 16.18 mg/g and reducing the equilibrium time from 10 h of RRH to 2, 4 and 1 h for epichlorohydrin treated rice husk (ERH), NaOH treated rice husk (NRH), sodium bicarbonate treated rice husk (NCRH), respectively. The effect of pH, sorption kinetics and isotherms were studied in batch experiments. Good correlation coefficient was obtained for pseudo second-order kinetic model, which agreed with chemisorption as the rate-limiting mechanism. Sorption isotherm test showed that equilibrium sorption data were better represented by Langmuir model than the Freundlich model. The highly efficient low cost and the rapid uptake of Cd(II) by NCRH indicated that it could be an excellent alternative for the removal of heavy metal by sorption process.

Adsorption↗

Removal of organic pollutants from aqueous solutions by adsorbents prepared from an agroalimentary by-product.

Two series of crosslinked starch polymers were tested for their ability to adsorb organic pollutants in aqueous solutions. The polymers were prepared by a crosslinking reaction of starch-enriched flour using epichlorohydrin as the crosslinking agent, without and in the presence of NH(4)OH. These polymers were used as sorbent materials for the removal of phenolic derivatives from wastewater. The influence of several parameters (kinetics, pH and polymer structure) on the sorption capacity was evaluated using the batch and the open column methods. Results of adsorption experiments showed that the starch-based materials exhibited high sorption capacities toward phenolic derivatives. The study of the kinetics of pollutant uptake revealed that the adsorbents presented a relatively fast rate of adsorption. The experimental data were examined using the Langmuir and Freundlich models and it was found that the Freundlich model appeared to fit the isotherm data better than the Langmuir model.

Adsorption↗

Biosorption of lead ion by chemically-modified biomass of marine brown algae Laminaria japonica.

In this paper, marine brown algae Laminaria japonica was chemically-modified by crosslinking with epichlorohydrin (EC(1), EC(2)), or oxidizing by potassium permanganate (PC), or only washed by distilled water (DW). They were used for equilibrium sorption uptake studies with lead. As can be seen from the experimental results that biosorption equilibriums were rapidly established in about 2h. The lead adsorption was strictly pH dependent, and maximum removal of lead on biosorbents were observed at pH 5.3. The effects solid/liquid ratio on lead biosorption was also investigated. The maximum lead uptakes were 1.67 mmol g(-1), 1.62 mmol g(-1), 1.54 mmol g(-1) and 1.21 mmol g(-1), respectively for EC(1), EC(2), PC and DW. The order of maximum lead uptakes for different pretreated and raw alga was EC(1)>EC(2)>PC>DW. A comparison of different isotherm models revealed that the combination of Langmuir and Freundlich (L-F) isotherm model fitted the experimental data best.

Adsorption↗

Release characteristics of salmon calcitonin from dextran hydrogels for colon-specific delivery.

Biodegradable dextran hydrogels were synthesized by crosslinking dextran (T-70) with epichlorohydrin (ECH) for the in vitro colon-specific delivery of salmon calcitonin (sCT). Crosslinking reaction was performed in 2.8 M NaOH solution both in the presence and absence of ethanol at 10 and 23 degrees C. Biodegradation kinetics of dextran hydrogels were studied and, in the presence of 0.7 IU ml-1 dextranase, dextran discs lost 71.0% and 56.5% of their dry weight within 80 h at pH 5.5 and 7.0, respectively. sCT was derivatized with the fluorescamine (FSM) at borate buffer (pH 9.0) and the quantitative determinations were performed using spectrofluorimetric method (lambdaex: 390 nm, lambdaem: 475 nm). In vitro release studies for the hydrogels prepared in the presence of ethanol were carried out in simulated gastrointestinal fluids. Results indicated that 84.9% of the loaded-sCT was released for 17 h and dextran hydrogel prepared in the presence of ethanol may be a good delivery device for the colon-specific delivery of other peptide-type drugs as well as sCT.

Animals↗

On-line coupling of equilibrium-sorptive enrichment to gas chromatography to determine low-molecular-mass pollutants in environmental water samples.

On-line combination of equilibrium sorptive enrichment and gas chromatography is used for the analysis of a group of pollutants varying widely in polarity and volatility in aqueous samples at trace levels. For the ESE process open-tubular traps were used. The newly developed hyphenated method shows a high sensitivity for all the compounds under study. The detection limits were typically between 0.1 and 1 microg/l. The sample volumes required for the compounds to reach equilibrium with the stationary phase are in the range of 20 ml for the aromatic hydrocarbons included in the study (benzene, toluene and p-xylene), to 200 ml for epichlorohydrin and dichlorohydrin. Within- and between-day precision of the absolute peak areas varied between 3 and 16%. The performance of the new method was tested by the analysis of different environmental water samples.

Amines↗

Effect of acidity consumption/production on the pH of aeration tank during the biodegradation of acetic acid/epichlorohydrin.

In order to elucidate the biologically driven pH fluctuation phenomena in industrial wastewater treatment, the contrary effects of acetic acid (AA) and epichlorohydrin (ECH) on the pH of aeration tank were investigated. Two simple equations were derived to estimate optimum neutralization pHs for the biological AA/ECH wastewater treatment, and the calculated optimum neutralization pHs were compared with experimental results. The pH in aeration tank was expected to fluctuate sharply with the smallest deviation of neutralization pH from the optimum value. However experimental results showed that real pH fluctuation is smaller than the theoretical one. It was considered that carbonate buffer in aqueous system relieves the pH fluctuation. The deviation between experimental and theoretical optimum neutralization pH could be mainly caused by volatility of AA and ECH. The deviation was larger with ECH wastewater of which volatility is larger than AA. Finally, this theory was successfully applied to the real petrochemical wastewater treatment. The pH of aeration tank was properly maintained when acidified wastewater (pH 3.4) was supplied.

Acetic Acid↗

Molecularly imprinted polymer hydrogels displaying isomerically resolved glucose binding.

Non-covalent molecular imprinting of poly(allylamine hydrochloride) (PAA HCl) with glucose phosphate mono-sodium salt produced molecularly imprinted polymer (MIP) hydrogels capable of quantitative, isomerically specific binding of glucose. By ionic association of a template molecule, glucose phosphate mono-sodium salt, to the polymer prior to covalent crosslinking, MIP hydrogels were created with an affinity for binding glucose. In this study we have synthesized MIPs using epichlorohydrin, ethylene glucol diglycidyl ether, and glycerol diglycidyl ether as crosslinkers in order to evaluate their effectiveness with respect to molecular imprinting for glucose. MIP hydrogels were also synthesized with the different crosslinkers and varying amounts of the template molecule in an attempt to elucidate the impact of imprint quantities on the effectiveness of the imprinting technique. Batch equilibration studies, using each of the MIPs and similar non-molecularly imprinted polymers were performed to determine their binding capacities with respect to glucose and fructose. The binding capacity data are discussed and employed in the evaluation of the specificity imparted by the imprinting procedure. MIP hydrogels with binding capacities in excess of 0.5 g of glucose per gram of dried gel were synthesized. Isomeric specificity in hydrogels imprinted for glucose was demonstrated by higher binding capacities of glucose than those of fructose in the same polymers.

Biocompatible Materials↗

An original method for studying in vitro the enzymatic degradation of cross-linked starch microspheres.

A reproducible technique based on microvolume measurements has been described which can be used for the assessment of the enzymatic degradation of small samples of microspheres (typically 104 to 105 micrometer3). As a model, the degradation pattern of epichlorohydrin cross-linked starch microspheres by alpha-amylase has been studied in the range of 5 to 100 IU/l by this technique. On the one hand, analysis of the decrease in volume of the microspheres by a cubic root law suggested that the degradation profiles were dependent on the initial size distribution of the microspheres. On the other hand, no internal rupture of the microspheres was detected from size distribution data, suggesting that enzymatic degradation of starch microspheres is surface-controlled.

Cross-Linking Reagents↗

A new procedure to produce lignocellulosic anion exchangers from agricultural waste materials.

Two lignocellulosic agricultural waste materials (LCM), sugarcane bagasse (BG) and rice hull (RH), were converted into weak-base anion exchanger and evaluated for their exchanger capacity for nitrate. Pure cellulose (PC) and pure alkaline lignin (PL) were also used as reference materials to elucidate possible reactivity in LCM. Epoxy and amino groups were introduced into BG, RH, PC and PL substrates after the reaction with epichlorohydrin and dimethylamine in the presence of pyridine and an organic solvent N,N-dimethylformamide (DMF). Amino group incorporation into cellulose decreased with the presence of water in the reaction mixture and increased with the reaction time and presence of a catalyst (pyridine). The highest maximum nitrate exchange capacity (Qmax) and yields of the prepared exchangers was obtained from PL (1.8 mmol g(-1) and 412.5%), followed by BG (1.41 mmol g(-1) and 300%), PC (1.34 mmol g(-1) and 166%) and RH (1.32 mmol g(-1) and 180%). The proposed synthetic procedure was effective in modifying PL, PC and LCM chemically resulting in a higher yield and nitrate removal capacity.

Agriculture↗

Analysis of liquid-phase chemical detection using guided shear horizontal-surface acoustic wave sensors.

Direct chemical sensing in liquid environments using polymer-guided shear horizontal surface acoustic wave sensor platforms on 36 degrees rotated Y-cut LiTaO3 is investigated. Design considerations for optimizing these devices for liquid-phase detection are systematically explored. Two different sensor geometries are experimentally and theoretically analyzed. Dual delay line devices are used with a reference line coated with poly (methyl methacrylate) (PMMA) and a sensing line coated with a chemically sensitive polymer, which acts as both a guiding layer and a sensing layer or with a PMMA waveguide and a chemically sensitive polymer. Results show the three-layer model provides higher sensitivity than the four-layer model. Contributions from mass loading and coating viscoelasticity changes to the sensor response are evaluated, taking into account the added mass, swelling, and plasticization. Chemically sensitive polymers are investigated in the detection of low concentrations (1-60 ppm) of toluene, ethylbenzene, and xylenes in water. A low-ppb level detection limit is estimated from the present experimental measurements. Sensor properties are investigated by varying the sensor geometries, coating thickness combinations, coating properties, and curing temperature for operation in liquid environments. Partition coefficients for polymer-aqueous analyte pairs are used to explain the observed trend in sensitivity for the polymers PMMA, poly(isobutylene), poly(epichlorohydrin), and poly(ethyl acrylate) used in this work.

Acrylic Resins↗

Aqueous-phase aminolysis: approach for the analysis of epoxides in water.

Trace concentrations of small soluble epoxides are suspected byproducts of drinking water ozonation. However, adequate characterization of epoxide formation is currently limited by the lack of suitable analytical methods to target these chemicals in dilute, but complex aqueous solutions. One potential approach is presented here based on aqueous-phase aminolysis. The method also employs solid-phase extraction, silylation of the solvent extract, and analysis by gas chromatography-mass spectrometry. This approach is demonstrated to be effective for the selective analysis of the epoxides 1,2-epoxybutane, epichlorohydrin, and epifluorohydrin in water with optimized method detection limits of 5-10 ng/L.

Amines↗

Phosphate removal from wastewaters using a weak anion exchanger prepared from a lignocellulosic residue.

Surface modifications of lignocellulosic residues has become increasingly important for improving their applications as adsorbents. In this study a new adsorbent system (BS-DMAHP) containing dimethylaminohydroxypropyl (DMAHP) weak base groups was prepared by the reaction of banana stem (BS), a lignocellulosic residue with epichlorohydrin and dimethylamine followed by treatment of hydrochloric acid. The original BS and BS-DMAHP were characterized with the help of surface area analyzer, infrared spectroscopy (IR) and scanning electron microscopy (SEM). Surface charge density of the samples as a function of pH was investigated using potentiometric titrations. Adsorbent exhibits very high adsorption potential for phosphate and more than 99.0% removal was achieved in the pH range of 5.0-7.0. Adsorption has been found to be concentration dependent and endothermic and follows a reversible second-order kinetics. The Langmuir and Freundlich isotherm models were applied to describe the equilibrium data. Equilibrium data agreed very well with the Langmuir model. Adsorption experiments were conducted using a commercial chloride form Duolite A-7, a weak base anion exchanger. The removal efficiency was tested using fertilizer industry wastewater. Adsorbed phosphate on BS-DMAHP can be recovered by treating with 0.1 M NaOH solution. A stability test operated for four cycles indicate a capacity loss of < 12.0%.

Adsorption↗

Water-soluble cyclodextrin polymers for enhanced relative recovery of hydrophobic analytes during microdialysis sampling.

Microdialysis relative recovery (RR) enhancement using different water-soluble, epichlorohydrin-based cyclodextrin polymers (CD-EPS) was studied in vitro for different analytes, amitryptiline, carbamazepine, hydroquinone, ibuprofen, and 4-nitrophenol. When compared to the native CDs (alpha, beta, and gamma) on a per mole basis, the CD-EPS enhanced microdialysis RR was either statistically greater or the same. beta-CD-EPS was more highly retained than native beta-CD by a 20 000 Da molecular weight cutoff (MWCO) polycarbonate membrane, but showed no statistical difference for loss across a 100 000 Da MWCO polyethersulfone membrane (PES). When the same weight percent of beta-CD or beta-CD-EPS was included in the microdialysis perfusion fluid, the beta-CD-EPS produced a higher microdialysis RR than native beta-CD for all analytes across the PES membrane. However, enhancements for the PC membrane were statistically insignificant when beta-CD and beta-CD-EPS were compared on a per mole basis. These results suggest that CD-EPS may be used as effective enhancement agents during microdialysis sampling and for some membranes provide the additional advantage of being retained more than native CDs.

Cellulose↗