Search PubMed⌕ Search

SEARCH · Search PubMed

Results for “Bioelectric Energy Sources”

Search indexed PubMed citations on genomics, clinical trials, systematic reviews and public health. Explore titles, authors and supplied subject terms, then open the PubMed record.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 217 records · Page 12Linked to original sources
PubMed2004

Continuous determination of biochemical oxygen demand using microbial fuel cell type biosensor.

A mediator-less microbial fuel cell (MFC) was used as a biochemical oxygen demand (BOD) sensor in an amperometric mode for real-time wastewater monitoring. At a hydraulic retention time of 1.05 h, BOD values of up to 100 mg/l were measured based on a linear relationship, while higher BOD values were measured using a lower feeding rate. About 60 min was required to reach a new steady-state current after the MFCs had been fed with different strength artificial wastewaters (Aws). The current generated from the MFCs fed with AW with a BOD of 100 mg/l was compared to determine the repeatability, and the difference was less than 10%. When the MFC was starved, the original current value was regained with a varying recovery time depending on the length of the starvation. During starvation, the MFC generated a background level current, probably due to an endogenous metabolism.

Bioelectric Energy Sources↗
PubMed2001

Biomass steam gasification--an extensive parametric modeling study.

A model for steam gasification of biomass was developed by applying thermodynamic equilibrium calculations. With this model, the simulation of a decentralized combined heat and power station based on a dual fluidized-bed steam gasifier was carried out. Fuel composition (ultimate analysis and moisture content) and the operating parameters, temperature and amount of gasification agent, were varied over a wide range. Their influences on amount, composition, and heating value of product gas and process efficiencies were evaluated. It was shown that the accuracy of an equilibrium model for the gas composition is sufficient for thermodynamic considerations. Net electric efficiency of about 20% can be expected with a rather simple process. Sensitivity analysis showed that gasification temperature and fuel oxygen content were the most significant parameters determining the chemical efficiency of the gasification.

Bioelectric Energy Sources↗
PubMed2001

Preparation and characterization of bio-diesels from various bio-oils.

Methyl, ethyl, 2-propyl and butyl esters were prepared from canola and linseed oils through transesterification using KOH and/ or sodium alkoxides as catalysts. In addition, methyl and ethyl esters were prepared from rapeseed and sunflower oils using the same catalysts. Chemical composition of the esters was determined by HPLC for the class of lipids and by GC for fatty acid compositions. The bio-diesel esters were characterized for their physical and fuel properties including density, viscosity, iodine value, acid value, cloud point, pure point, gross heat of combustion and volatility. Methyl and ethyl esters prepared from a particular vegetable oil had similar viscosities, cloud points and pour points, whereas methyl, ethyl, 2-propyl and butyl esters derived from a particular vegetable oil had similar gross heating values. However, their densities, which were 2 7% higher than those of diesel fuels, statistically decreased in the order of methyl approximately 2-propyl > ethyl > butyl esters. Butyl esters showed reduced cloud points (-6 degrees C to -10 degrees C) and pour points (-13 degrees C to -16 degrees C) similar to those of summer diesel fuel having cloud and pour points of -8 degrees C and -15 degrees C, respectively. The viscosities of bio-diesels (3.3-7.6 x 10(-4) Pa s at 40 degrees C) were much less than those of pure oils (22.4-45.1 x 10(-4) Pa s at 40 degrees C) and were twice those of summer and winter diesel fuels (3.50 and 1.72 x 10(-4) Pa s at 40 degrees C), and their gross heat contents of approximately 40 MJ/kg were 11% less than those of diesel fuels (approximately 45 MJ/kg). For different esters from the same vegetable oil, methyl esters were the most volatile, and the volatility decreased as the alkyl group grew bulkier. However, the bio-diesels were considerably less volatile than the conventional diesel fuels.

Bioelectric Energy Sources↗
PubMed2001

Bioproductivity and nutrient cycling in bamboo and acacia plantation forests.

This study mainly aimed to investigate the bioproductivity and nutrient cycling processes in plantation forests of bamboo and acacia. In India, multipurpose tree (MPT) species are extensively planted to meet the increasing demand for fuel and industrial wood. The bioproductivity studies of bamboo showed that the total biomass increased with age (2.2 t/ha/year 1) up to six years (297.8 t/ha/year 6) and then decreased (15.6 t/ha/year 10). With acacia, the total biomass increased from 1.8 t/ha/(year 1) to 5.0 t/ha/ (year 3) and 10.9 t/ha/(year 5). In general the biomass increased with increase of diameter and height. Nutrient cycling in the plantation on an annual basis was worked out. A complete harvest of bamboo in 6 years removes 2341 kg/ha of nitrogen, 22 kg/ha of phosphorus, 2,653 kg/ha, of potassium, 1,211 kg/ha of calcium and 1,356 kg/ha of magnesium. A total harvest of above ground biomass of acacia in 3 years removes (kg/ha) 91.74 N, 2.53 P, 73.41 K, 110.45 Ca, 14.06 Mg, and in 4 years removes (kg/ha) 227.47 N, 7.34 P, 181.04 K, 284.15 Ca, and 38.89 Mg.

Acacia↗
PubMed2001

An initial assessment of spent mushroom compost as a potential energy feedstock.

The Irish mushroom industry has expanded rapidly in the last decade, particularly in the border counties. Its success has generated concern, however, as the production of spent mushroom compost (SMC) has increased. Until recently, SMC as an agricultural waste has been disposed of without due consideration to the environment. As County Councils increasingly address river pollution, restrictions will prevent expansion of the mushroom industry without an SMC waste management solution. This paper looks at the availability and composition of SMC and considers its potential as an energy feedstock. Variability in SMC composition was investigated by sampling from various locations over several months. Analyses showed that, on a dry ash free basis, SMC has a calorific value equivalent to sewage sludge which has been successfully fired for many years. Compositional analysis confirmed the dry fuel as consistent in make-up and showed the moisture content to vary within 60-77%, on an as-received basis.

Agaricales↗
PubMed2001

Batch co-digestion of multi-component agro-wastes.

In certain parts of the developing world conventional energy supplies such as electricity, gas, coal and petroleum by-products are either unavailable, too capital intensive to install, are unjustifiable due to low population densities in some semi-arid regions, or are simply unaffordable to the target population. In Zimbabwe, it has been assessed that only biomass energy can conveniently provide both lighting and space heating. Therefore, means of generating biogas from agricultural and other organic wastes, and to encourage their use is a policy which has been adopted by Zimbabwe's Department of Energy. In this study cattle slurry was mixed with a range of solid wastes and allowed to digest in 11 batch digesters. The mixtures which were used were selected on the basis of centroid design with the objective of determining whether there was either synergism or antagonism. Two trials were carried out, one based on cattle slurry, chicken manure (CM) and molasses (Mol), the other based on sheep and goat manure, chicken manure and surplus activated sludge. The criteria for judging the success of a co-digestion were volatile solids (VS) reduction, total methane production and methane yield. In the first trial, the analysis based on the methane yield showed that there was no antagonism and that the mixture of 30% cattle slurry/30% CM/40% Mol gave a synergistic effect. The analysis based on the VS destruction, however, did show that there was some very slight antagonism. In the second trial, the analysis based on the methane yield showed that there was both antagonism and synergism and that the synergism produced an extra 6.7% methane. The analysis based on the VS destruction also showed that there was both antagonism and synergism but that the effects were small.

Agriculture↗
PubMed2003

Biogas production from water hyacinth and channel grass used for phytoremediation of industrial effluents.

The paper reports on the biogas production from water hyacinth (Eichhornia crassipes) and channel grass (Vallisneria spiralis) employed separately for phytoremediation of lignin and metal-rich pulp and paper mill and highly acidic distillery effluents. These plants eventually grow well in diluted effluent up to 40% (i.e., 2.5-times dilution with deionized water) and often take up metals and toxic materials from wastewater for their metabolic use. Slurry of the two plants used for phytoremediation produced significantly more biogas than that produced by the plants grown in deionized water; the effect being more marked with plants used for phytoremediation of 20% pulp and paper mill effluent. Biogas production from channel grass was relatively greater and quicker (maximum in 6-9 days) than that from water hyacinth (in 9-12 days). Such variation in biogas production by the two macrophytes has been correlated with the changes in C, N and C/N ratio of their slurry brought by phytoremediation.

Alcoholic Beverages↗
PubMed2003

Optimization of lipase-catalyzed biodiesel by response surface methodology.

Biodiesel prepared by catalyzed mild transesterification has become of much current interest for bioenergy. The ability of a commercial immobilized lipase (Novo Industries--Bagsvaerd, Denmark) from Rhizomucor miehei (Lipozyme IM-77) to catalyze the transesterification of soybean oil and methanol was investigated in this study. Response surface methodology and 5-level-5-factor central composite rotatable design were employed to evaluate the effects on reaction time, temperature, enzyme amount, molar ratio of methanol to soybean oil, and added water content on percentage weight conversion to soybean oil methyl ester by transesterification. Based on ridge max analysis, the optimum synthesis conditions giving 92.2% weight conversion were: reaction time 6.3 h, temperature 36.5 degrees C, enzyme amount 0.9 BAUN (Batch Acidolysis Units NOVO), substrate molar ratio 3.4:1, and added water 5.8%.

Bioelectric Energy Sources↗
PubMed2004

Energy evaluation of forest residues originated from shrub species in Galicia.

In this study we present an alternative for the management of the excess of shrub species that nowadays take up around 800000 ha in Galicia (NW Spain). This alternative is based on the exploitation of the energetic resources contained in the excess of shrubs by their combustion in specially designed plants for production of electric energy. The different species were sorted into three groups: Ulex europaeus L. (furze), Sarothamnus scoparius (L.) Link (broom) and Erica sp. (heaths). Their LHV were calculated through measurements of the corresponding HHV and resulted 7600, 7300 and 7200 kJ kg(-1) respectively. Biomass productions (T ha(-1)) were also calculated resulting 20 T ha(-1) (furze), 30 T ha(-1) (broom), and 15 T ha(-1) (heaths). Analyses of all these values make these species very valuable for their energy exploitation. Samples were collected over one year in different zones to study the effect of the environmental conditions on the calorific values.

Bioelectric Energy Sources↗
PubMed2002

The design of dehydrogenase enzymes for use in a biofuel cell: the role of genetically introduced peptide tags in enzyme immobilization on electrodes.

The immobilization of the mutants of L-lactate dehydrogenase (LDH) on poly(aniline) (PANi) composite films has been investigated. Mutants possessing peptide tags of varying charge and nucleophilicity were created to probe the nature of the interaction between the protein and PANi. These results are significant for the development of a 'generic' approach to the immobilization of enzymes and other proteins.

Bioelectric Energy Sources↗
PubMed2003

Membrane fluidity sensoring microbial fuel cell.

A study has been performed to examine the effect of temperature and ethanolic stresses on the coulombic efficiency of a microbial fuel cell. The conventional-type fuel cell containing Gram-negative bacteria, Proteus vulgaris, was investigated as a model system. From current output measurements, it was found that the coulombic yields were altered by environmental stresses such as temperature shock or ethanol treatment to the bacteria. While high-temperature or ethanolic shock led to a remarkable decrement in coulombic output, the low-temperature shock induced a slight increase in microbial fuel cell efficiency. These results indicate that the membrane fluidity is affected considerably by environmental stress, which in turn affects the electron transfer process through the bacterial cell membrane to and from the electrode. This interpretation was confirmed by the cyclic voltammetric study of a mediator on an electrode surface modified with the lipids extracted from the membrane of P. vulgaris under the given stress. Markedly different electrochemical behaviors were observed depending on the environmental stress. A reciprocal relationship between coulomb output and the ratio of saturation/unsaturation of fatty acids has been observed. This is the first report, to our knowledge, that the structural adaptation of membrane fatty acids in response to the environmental shock can regulate the coulombic efficiency of a microbial fuel cell.

Bioelectric Energy Sources↗
PubMed2006

[Construction of sugar-based microbial fuel cells by dissimilatory metal reduction bacteria].

Dissimilatory Metal Reduction Bacteria play an important role in the anaerobic environment. This kind of bacteria gains energy by coupling the oxidation of organic acid or sugars to the reduction of metal oxides. The graphite electrode rode can also be used as the final electron acceptor due to its similarity to solid metal oxides. Based on this biological mechanism, Dissimilatory Metal Reduction Bacteria Rhodoferaxferrireducens was used to construct a suit of microbial fuel cells with sugars as fuel, and the process and mechanism of electricity generation was studied. Rhodoferax ferrireducens was inoculated into the anode chamber in which a graphite electrode served as the final electron acceptor and glucose as the sole electron donor. It was showed that current density was up to 158mA/m2 with the resistance of 510omega at the normal temperature (platform voltage was around 0.46V, the effectual electrode surface was 57cm2). Following 20days' growth a large amount of bacteria cells attached to the electrode surface had been observed through the SEM images. The plandtonic cell protein concentration was 140mg/L and the attached biomass of electrode surface was 1180mg/m2 determined by the Bradford method, which indicated quite a few bacteria attached to the electrode. By analyzing the voltage value measured by the data acquisition system, it was proved that microbial electricity generation attributed mainly to the electrochemically and biologically active cells attached to the electrode, while the planktonic cells had no ability to catalyze electricity generation and almost had not electrochemically and biologically active. Furthermore, this kind of microbial fuel cells exhibited a good electrochemical cycle property and proved to be efficient in biomass utilization and energy restore since other sugars like fructose, sucrose, even xylose, could be oxidized and finally decomposed. Vast waste biomass in the form of carbohydrates is discarded in the environment. Not only is contamination of the environment caused by the discarded biomass, but also abundant energy stored in the biomass is drained away in vain. The sugar-based microbial fuel cells constructed by Rhodoferax ferrireducens could effectively transform the energy stored in sugars into electricity. Meanwhile, the microbial fuel cells presented in this paper, which could work cleanly at normal temperature with a good cycle property, showed a promising future application in this field.

Bioelectric Energy Sources↗
PubMedDate not supplied

A comparison of air and hydrogen peroxide oxygenated microbial fuel cell reactors.

In this study, a two-compartment continuous flow microbial fuel cell (MFC) reactor was used to compare the efficiencies of cathode oxygenation by air and by hydrogen peroxide. The MFC reactor had neither a proton-selective membrane nor an electron transfer mediator. At startup, the cathodic compartment was continuously aerated and the anodic compartment was fed with a glucose solution. An increase of electrical power generation from 0.008 to 7.2 mW m(-2) of anode surface with a steady-state potential of 215-225 mV was observed within a period of 12 days. The performance of the air-oxygenated MFC reactor progressively declined over time because of biofilm proliferation in the cathodic compartment. Oxygenation of the cathodic compartment using 300 mL d(-1) of 0.3% hydrogen peroxide solution resulted in a power density of up to 22 mW m(-2) (68.2 mA m(-2)) of anode surface at a potential of 340-350 mV. The use of H2O2 for oxygenation was found to improve the long-term stability of the MFC reactor.

Air↗
PubMed2002

High-value renewable energy from prairie grasses.

Projected economic benefits of renewable energy derived from a native prairie grass, switchgrass, include nonmarket values that can reduce net fuel costs to near zero. At a farm gate price of $44.00/dry Mg, an agricultural sector model predicts higher profits for switchgrass than conventional crops on 16.9 million hectares (ha). Benefits would include an annual increase of $6 billion in net farm returns, a $1.86 billion reduction in government subsidies, and displacement of 44-159 Tg/year (1 Tg = 1012 g) of greenhouse gas emissions. Incorporating these values into the pricing structure for switchgrass bioenergy could accelerate commercialization and provide net benefits to the U.S. economy.

Bioelectric Energy Sources↗
PubMed2002

Brassica carinata as an alternative oil crop for the production of biodiesel in Italy: engine performance and regulated and unregulated exhaust emissions.

A comparison of the performance of Brassica carinata oil-derived biodiesel with a commercial rapeseed oil-derived biodiesel and petroleum diesel fuel is discussed as regards engine performance and regulated and unregulated exhaust emissions. B. carinata is an oil crop that can be cultivated in coastal areas of central-southern Italy, where it is more difficult to achieve the productivity potentials of Brassica napus (by far the most common rapeseed cultivated in continental Europe). Experimental tests were carried out on a turbocharged direct injection passenger car diesel engine fueled with 100% biodiesel. The unregulated exhaust emissions were characterized by determining the SOOT and soluble organic fraction content in the particulate matter, together with analysis of the content and speciation of polycyclic aromatic hydrocarbons, some of which are potentially carcinogenic, and of carbonyl compounds (aldehydes, ketones) that act as ozone precursors. B. carinata and commercial biodiesel behaved similarly as far as engine performance and regulated and unregulated emissions were concerned. When compared with petroleum diesel fuel, the engine test bench analysis did not show any appreciable variation of output engine torque values, while there was a significant difference in specific fuel consumption data at the lowest loads for the biofuels and petroleum diesel fuel. The biofuels were observed to produce higher levels of NOx concentrations and lower levels of PM with respect to the diesel fuel. The engine heat release analysis conducted shows that there is a potential for increased thermal NOx generation when firing biodiesel with no prior modification to the injection timing. It seems that, for both the biofuels, this behavior is caused by an advanced combustion evolution, which is particularly apparent at the higher loads. When compared with petroleum diesel fuel, biodiesel emissions contain less SOOT, and a greater fraction of the particulate was soluble. The analysis and speciation of the soluble organic fraction of biodiesel particulate suggest that the carcinogenic potential of the biodiesel emissions is probably lower than that of petroleum diesel. Its better adaptivity and productivity in clay and sandy-type soils and in semiarid temperate climate and the fact that the performance of its derived biodiesel is quite similar to commercial biodiesel make B. carinata a promising oil crop that could offer the possibility of exploiting the Mediterranean marginal areas for energetic purposes.

Air Pollution↗