Search PubMed⌕ Search

SEARCH · Search PubMed

Results for “Wettability”

Search indexed PubMed citations on genomics, clinical trials, systematic reviews and public health. Explore titles, authors and supplied subject terms, then open the PubMed record.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 199 records · Page 11Linked to original sources
PubMed2006

Fabrication of flexible gold films with periodic sub-micrometer roughness and their wettability control by modification of SAM.

Flexible honeycomb gold films supported by polymer sheets are fabricated by using polystyrene particle monolayers. The surfaces of the flexible gold films are covered with self-assembled monolayers (SAMs) of hydrophobic or hydrophilic thiol compounds, and the wettability of the modified surface is evaluated by measurements of the contact angles of water droplets. The contact angle of the film covered with hydrophobic SAM is ca. 150 degrees, which is greater than the value of 112 degrees for a flat gold surface, while the values for hydrophilic SAM are below 10 degrees.

Journal Article↗
PubMed2002

Remodeling of fibrinogen by endothelial cells in dependence on fibronectin matrix assembly. Effect of substratum wettability.

The endothelization of cardiovascular implants is desirable to improve their blood compatibility. The capacity of the endothelial cells to attach, migrate, proliferate and function on the implant surface depends on the presence of matrix proteins such as fibronectin (FN) and fibrinogen (FNG). In this study, we show that the deposition of fibrinogen into extracellular matrix-like structures by human umbilical vein endothelial cells (HUVEC) is dependent on FN matrix formation. We found further that the process of organization of both adsorbed and soluble FN and FNG is dependent on the wettability of materials since it was observed only on a hydrophilic and not on a hydrophobic model surface. beta(3) integrin was involved in the process of cell attachment to adsorbed FNG, while the mechanism of FNG fibrillogenesis required the activity of the beta(1) integrin. Studies of EC morphology showed the predominant peripheral organization of actin filaments and the formation of distinct leading and trailing cell edges suggesting a motile phenotype of cells when they are seeded on FNG. In summary, we concluded that adsorbed fibrinogen may enhance the motility of HUVEC and that soluble FNG requires FN matrix assembly to be organized in fibrilar structures.

Journal Article↗
PubMed2004

Insect aquaplaning: Nepenthes pitcher plants capture prey with the peristome, a fully wettable water-lubricated anisotropic surface.

Pitcher plants of the genus Nepenthes have highly specialized leaves adapted to attract, capture, retain, and digest arthropod prey. Several mechanisms have been proposed for the capture of insects, ranging from slippery epicuticular wax crystals to downward-pointing lunate cells and alkaloid secretions that anesthetize insects. Here we report that perhaps the most important capture mechanism has thus far remained overlooked. It is based on special surface properties of the pitcher rim (peristome) and insect "aquaplaning." The peristome is characterized by a regular microstructure with radial ridges of smooth overlapping epidermal cells, which form a series of steps toward the pitcher inside. This surface is completely wettable by nectar secreted at the inner margin of the peristome and by rain water, so that homogenous liquid films cover the surface under humid weather conditions. Only when wet, the peristome surface is slippery for insects, so that most ant visitors become trapped. By measuring friction forces of weaver ants (Oecophylla smaragdina) on the peristome surface of Nepenthes bicalcarata, we demonstrate that the two factors preventing insect attachment to the peristome, i.e., water lubrication and anisotropic surface topography, are effective against different attachment structures of the insect tarsus. Peristome water films disrupt attachment only for the soft adhesive pads but not for the claws, whereas surface topography leads to anisotropic friction only for the claws but not for the adhesive pads. Experiments on Nepenthes alata show that the trapping mechanism of the peristome is also essential in Nepenthes species with waxy inner pitcher walls.

Animals↗
PubMed1989

Efficacy and stability of wettable powder amitraz in field and laboratory studies against Boophilus annulatus (Acari: Ixodidae) in south Texas.

A study was done at the USDA-ARS, Cattle Fever Tick Research Laboratory, Mission, Tex., to determine the efficacy of a 50% wettable powder (WP) amitraz formulation applied as a whole-body spray in a standard dip vat, and in a laboratory bioassay against Boophilus annulatus (Say) on cattle. A study also was done at the King Ranch in Kleberg County, Tex., to determine the stability of 50% WP amitraz in a dip vat under South Texas conditions Cattle were infested with all parasitic life stages of B. annulatus and were sprayed or dipped with a concentration of 0.025% amitraz. As determined by calculations of the index of reproduction, the whole-body spray treatment provided 86% control of the ticks and the dip treatment provided 99.8% control. Laboratory bioassay results compared favorably with those obtained with the dip vat treatment. Amitraz WP settled very rapidly in the freshly charged ranch vat. However, as more cattle were dipped and the vat became polluted with dirt and excrement, settling occurred much more slowly. Overall, amitraz remained stable in the vat during the test period.

Administration, Topical↗
PubMed1989

Guide to the clinical assessment of on-eye wettability of rigid gas permeable lenses.

The number of rigid gas permeable (RGP) contact lens materials is increasing rapidly. One of the most critical issues for acceptance of new materials is lens wettability. This paper describes techniques for assessing lens wetting characteristics while the lenses are worn on the eye, and relates each observation to the lens material properties or patient tear characteristics. This method of lens wetting assessment is intended to aid the practitioner in determining the optimal lens material for a patient, based upon assessment of the interactions inherent in the lens-eye system.

Blinking↗
PubMed2000

Thermal conductance and wettability of xenon on resorcinol-formaldehyde aerogels.

We have performed thermal conductivity and adsorption isotherm measurements to investigate the system formed by Xe adsorbed on resorcinol-formaldehyde (RF) aerogel. Below 80 K, the thermal conductivity of the Xe/RF-aerogel system is essentially identical to that of the bare RF aerogel; however, above this temperature the thermal conductivity of the system increases significantly above that of the bare aerogel. Adsorption isotherm measurements indicate that Xe incompletely wets the RF aerogel below Xe's bulk triple point temperature. The thickness of the Xe film that forms on the RF aerogel decreases with decreasing temperature. By 80 K the total amount of Xe present on the aerogel in equilibrium with the saturated vapor pressure is less than the amount needed to form about 1.5 atomic layers of Xe on the substrate. We attribute the observed changes in the thermal conductivity of the Xe/aerogel system to changes in the wettability of the aerogel by the Xe film.

Journal Article↗
PubMed2004

Three-phase threshold capillary pressures in noncircular capillary tubes with different wettabilities including contact angle hysteresis.

We use the Helmholtz free energy balance and the Mayer-Stowe-Princen method to derive general expressions governing multiphase pistonlike displacements in noncircular capillary elements with arbitrary wettability. We take into account hysteresis in oil/water, gas/water, and gas/oil contact angles. We study both two- and three-phase systems. We find threshold capillary pressures for gas invasion into oil, oil invasion into gas, and water invasion into oil for capillaries with an irregular triangular cross section. Finally we study the effects of shape factor, oil/water capillary pressure, and oil/water and gas/oil contact angles on the threshold capillary pressure for gas invasion into oil for spreading and nonspreading systems. In many cases the threshold pressures of the three-phase displacements are not the same as those of the equivalent pseudo-two-phase displacements. It is possible that gas invasion can occur resulting in a configuration without oil layers, even if oil layers are geometrically possible. This emphasizes the distinction between geometric and thermodynamic stability-it is the latter that controls threshold pressures.

Journal Article↗
PubMed2006

Wettability control of droplet deposition and detachment.

The conditions for droplet deposition on plane substrates are studied using electrowetting to continuously modulate the surface wettability. Droplets of controlled volume attached to the tip of a pipette are brought into contact with the surface. During retraction of the pipette the droplets are deposited or detach completely depending on volume and contact angle. The experimental limit of deposition in the contact angle or volume plane is in good agreement with analytical and numerical predictions obtained within the capillary model.

Journal Article↗
PubMed2006

Coalescence of spreading droplets on a wettable substrate.

We investigate experimentally and theoretically the coalescence dynamics of two spreading droplets on a highly wettable substrate. Upon contact, surface tension drives a rapid motion perpendicular to the line of centers that joins the drops and lowers the total surface area. We find that the width of the growing meniscus bridge between the two droplets exhibits power-law behavior, growing at early times as t1/2. Moreover, the growth rate is highly sensitive to both the radii and heights of the droplets at contact, scaling as ho3/2/Ro. This size dependence differs significantly from the behavior of freely suspended droplets, in which the coalescence growth rate depends only weakly on the droplet size. We demonstrate that the scaling behavior is consistent with a model in which the growth of the meniscus bridge is governed by the viscously hindered flux from the droplets.

Journal Article↗
PubMed1972

Penetration of stomata by liquids: dependence on surface tension, wettability, and stomatal morphology.

Wettability of the leaf surface, surface tension of the liquid, and stomatal morphology control penetration of stomata by liquids. The critical surface tension of the lower leaf surface of Zebrina purpusii Brückn. was estimated to be 25 to 30 dyne cm(-1). Liquids having a surface tension less than 30 dyne cm(-1) gave zero contact angle on the leaf surface and infiltrated stomata spontaneously while liquids having a surface tension greater than 30 dyne cm(-1) did not wet the leaf surface and failed to infiltrate stomata. Considering stomata as conical capillaries, we were able to show that with liquids giving a finite contact angle, infiltration depended solely on the relationship between the magnitude of the contact angle and the wall angle of the aperture. Generally, spontaneous infiltration of stomata will take place when the contact angle is smaller than the wall angle of the aperture wall. The degree of stomatal opening (4, 6, 8, or 10 mum) was of little importance. Cuticular ledges present at the entrance to the outer vestibule and between the inner vestibule and substomatal chamber resulted in very small if not zero wall angles, and thus played a major role in excluding water from the intercellular space of leaves. We show why the degree of stomatal opening cannot be assessed by observing spontaneous infiltration of stomata by organic liquids of low surface tension.

Journal Article↗
PubMed1989

The wettability of bonding resins used in the composite resin/glass ionomer 'sandwich technique'.

There is some controversy about the significance of the wettability of the unfilled resin bonding agent that is generally recommended for prior application when placing a composite resin restoration. It has been suggested that the degree of viscosity does not matter. However, when investigating the union which is developed between composite resin and glass ionomer cement in the 'sandwich technique', it was noted that when using certain composite resins and their prescribed bonding resins the failure under tensile stress was adhesive at the union rather than cohesive in the cement. Further investigation showed that the bonding resins involved in these failures were more viscous than those bonding resins used in the more successful unions. In this investigation the contact angle of the bonding resin on the surface of glass ionomer cement was used as the measure of viscosity. It is suggested that the degree of viscosity of the bonding resin is significant in the success or otherwise of the 'sandwich technique'.

Acid Etching, Dental↗
PubMed1980

The granulation of ternary mixtures: the effect of the wettability of the powders.

Granules have been prepared by a standard method from ternary mixtures of lactose, boric acid and either sulphanilamide, heavy kaolin or salicylic acid, using an aqueous solution of polyvinylpyrrolidone as binder. The granules were examined for size distribution and for the work required to crush larger granules from each batch. For the same binder volume the mean granule sizes and resistance to crushing of the granules increased as the wettability of the third component increased. The detailed results are discussed in relation to powder wetting and the packing properties of powder mixtures.

Boric Acids↗
PubMed2006

Efficacy studies of Aquaprene (emulsifiable concentrate and wettable powder) insect growth regulator formulations against third- and fourth-stage larvae of Ochlerotatus taeniorhynchus in small-plot field studies.

Efficacy studies were conducted with Aquaprene emulsifiable concentrate (EC) (33.6% active ingredient [AI]) and wettable powder (WP) (40% AI) (S)-methoprene insect growth regulator formulations against larval Ochlerotatus taeniorhynchus in small field test plots. Aquaprene EC was applied at 7.18 and 9.57 g/acre. Approximately one thousand 4th-stage larvae were added to each plot before treatment, and 24 h later pupae were collected to determine emergence inhibition. At both applications rates, Aquaprene EC was extremely effective (99%) at significantly reducing adult emergence in the studies. Two application rates ((S)-methoprene at 2.4 and 4.8 g/acre) of the Aquaprene WP also were evaluated against Oc. taeniorhynchus at 1, 3, 7, and 14 days after treatment. Emergence inhibition and statistical analysis showed that significant differences were found between the (S)-methoprene rates of 2.4 and 4.8 g/acre at each posttreatment assessment. The (S)-methoprene rate of 4.8 g/acre was effective in controlling adult emergence for up to 14 days after treatment.

Animals↗
PubMed1986

Wettability of the corneal surface: a reappraisal.

Previous attempts by others to measure the wettability of the corneal epithelium concluded that the surface was strongly hydrophobic, but used methods which seem likely to damage the epithelial cell surface. These experimental techniques were repeated and the effects on the surface analysed by scanning electron microscopy. It is concluded that such methods cannot establish either the hydrophobicity or hydrophilicity of the cornea.

Animals↗
PubMed1961

Field performance of dieldrin/resin wettable powders on sorptive mud surface.

Recent field experiments on the relative performance of dieldrin and dieldrin/resin wettable powders on sorptive mud surface have not confirmed the promising results obtained with the latter products in earlier laboratory tests. In view of this a renewed investigation into the possible factors governing the performance of such products was considered desirable, and further laboratory and field experiments were carried out in co-operation with the Colonial Pesticides Research Unit at Arusha, Tanganyika.The results of these experiments have given a better understanding of the factors involved, and a coherent interpretation of the differences in performance shown by various products under different conditions. The main factors to be taken into account appear to be: mobility of the insects during exposure, as influenced by insect species and exposure conditions; inherent toxicity of the dieldrin/resin particles; and the average relative humidity inside the experimental huts.The sorption phenomenon can be demonstrated in the field, but in view of the humidity conditions it does not seem likely that it will interfere seriously with practical mosquito control. A potential critical condition might be prevalent only in areas where the presence of sorptive mud is coupled with long periods of low humidity inside the huts, but further experimental data are necessary to confirm this.

Animals↗