Determination of metals and their compounds in water.
Explore the source record for details and available documents.
Arsenic↗
SEARCH · Search PubMed
Results for “Waste Disposal, Fluid”
Search indexed PubMed citations on genomics, clinical trials, systematic reviews and public health. Explore titles, authors and supplied subject terms, then open the PubMed record.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
[Experience with the algae fluid waste test in North Rhine-Westphalia].
Explore the source record for details and available documents.
Cell Division↗
Computational fluid dynamics in wastewater treatment.
Explore the source record for details and available documents.
Calibration↗
A model for predicting endotoxin concentrations in metalworking fluid sumps in small machine shops.
METHODS: In British Columbia, Canada, nineteen small machine shops which used water-based metalworking fluids (MWF) were examined. One bulk MWF sample was taken from each independent sump (N=140) and tested for endotoxin using the Limulus Amoebocyte Lysate assay. Factors that might influence the MWF sump endotoxin concentration were investigated using mixed effect multiple regression modelling to control for repeated measures within shops. RESULTS: The geometric mean (GM) endotoxin concentration was 6791 EU/ml. Contamination of MWF with tramp oil, MWF pH, MWF temperature, and MWF type were significant predictors of sump fluid endotoxin concentration (model P=0.0001, ordinary least squares R(2) =0.36). Concentrations of endotoxin in sump fluids were increased by MWF contamination with tramp oils such as hydraulic oils, preservative oils, spindle oils, slidway lubricants, gear lubricants, and greases (model predicted GM=17400 EU/ml vs. 1600 EU/ml without tramp oil). Concentrations were also elevated where pH was lower than 8.5 (predicted GM=10600, vs 3600 EU/ml for pH 8.5 to 9.5), where soluble fluids were used (predicted GM=11800 vs. 2800 EU/ml for synthetic fluids), and where sump fluid temperatures were higher (predicted GM=2600 EU/ml at 11 degrees C vs. 21500 EU/ml at 32 degrees C). The within-shop correlation of sump bulk fluid endotoxin concentrations was 38%. CONCLUSIONS: Minimizing tramp oil contamination, using synthetic fluids, and monitoring pH and temperature would be valuable tools for controlling endotoxin contamination in MWF sumps. In addition, since there was correlation within-shop, contamination of one sump in a shop may suggest changing the fluids in all.
Endotoxins↗
[Treatment of cyanide compound with ultraviolet radiation in waste fluid cotainting cyanmethemoglobin (II) (author's transl)].
Explore the source record for details and available documents.
Cyanides↗
Experimental evaluation of the transesterification of waste palm oil into biodiesel.
Transesterified vegetable oils (VOs) are promising alternative diesel fuel. Waste VOs are cheap and renewable but currently disposed of inadequately. In this work, waste palm oil was transesterified under various conditions. H2SO4 and different concentrations of HCl and ethanol at different excess levels were used. Higher catalyst concentrations (1.5-2.25 M) produced biodiesel with lower specific gravity, gamma, in a much shorter reaction time than lower concentrations. The H2SO4 performed better than HCl at 2.25 M, as it resulted in lower gamma. Moreover, a 100% excess alcohol effected significant reductions in reaction time and lower gamma relative to lower excess levels. The best process combination was 2.25 M H2SO4 with 100% excess ethanol which reduced gamma from an initial value of 0.916 to a final value of 0.8737 in about 3 h of reaction time. Biodiesel had the behavior of a Newtonian fluid.
Catalysis↗
Ammonium removal using a vertically moving biofilm system.
Ammonium-nitrogen (NH4-N) removal using a vertically moving biofilm system was investigated at a temperature of 11 degrees C. The biofilms in this process were grown on biofilm modules, consisting of high surface area plastic media, which were vertically and repeatedly moved up into the air and down into the wastewater. The maximum NH4-N removal efficiency was up to 98.8% and the areal NH4-N removal rates, based on the surface area of the biofilm modules, were within the range of 0.68-1.94 g NH4-N m(-)2 day(-1). The kinetics of ammonium removal occurring after carbonaceous oxidation was completed can be simulated by using a zero-order empirical model. The ammonium removal rate was found to be proportional to the square root of the mass of biofilms on the modules. Monitoring DO concentrations in the bulk fluid showed that the vertically moving biofilm system possessed good aeration efficiency.
Biofilms↗
Modelling and simulation of the steady-state of secondary settlers in wastewater treatment plants.
This paper discusses the steady-state modelling of thickening in circular secondary settlers of activated sludge processes. The limitations of the solid flux theory basic models to represent steady-state operating conditions serve as a basis to introduce more sophisticated models derived from computational fluid dynamics. Parameter identification and sensitivity studies have been performed from lab-scale continuous experiments.
Computer Simulation↗
Phosphate and potassium recovery from source separated urine through struvite precipitation.
Phosphate can be recovered as struvite or apatite in fluidised bed reactors. Urine has a much higher phosphate concentration than sludge reject water, allowing simpler (and less expensive) process for precipitation of phosphates. A stirred tank reactor with a special compartment for liquid solid separation was used to precipitate struvite from urine. Magnesium ammonium phosphate as well as potassium magnesium phosphate are two forms of struvite that were successfully precipitated. Liquid/solid separation was very effective, but the compaction of struvite was rather poor in the case of potassium struvite. Crystals did not form clusters and maintained the typical orthorhombic structure. Ammonium struvite had slightly lower effluent phosphate concentrations, but an average of 95% of influent phosphate was removed regardless of ammonium or potassium struvite precipitation. Fluid mechanics is believed to be important and should inform further work.
Chemical Precipitation↗
Incineration and monitoring of low-level 3H and 14C wastes at a biological research institution.
Low-level radioactive waste containing liquid scintillation fluid and known amounts of 14C and 3H has been incinerated in a modified pathological incinerator with the incinerator effluent, refractory surface and ash being monitored. The study relates the activity monitored to that incinerated and discusses how this relation was affected by a modification of the incinerator and monitoring conditions. No significant activity was found to be associated with the ash, particulates or the refractory surface. These data suggest that most of the activity is released as tritiated water vapor and 14C-labeled carbon dioxide. However, incomplete oxidation may occur for short periods of time depending on the amount of liquid scintillation fluid incinerated, with the possible release of 14C-labeled carbon monoxide.
Carbon Radioisotopes↗
Heavy metals in fluids and tissues of fetal calves and in young calves of nursing cows exposed or not exposed to anaerobically digested wastewater sludge.
Fetal fluid, diaphragm muscle, heart, kidney, and liver from 14 four- to five-month-old calf fetuses were analyzed for Zn, Cu, Cd, Cr, Ni, Pb, and Fe. The same tissues and bone were examined from postparturient calves 30, 60, and 120 days of age. Weaned calves (8 to 9 months old) were necropsied and diaphragm muscle, heart, kidney, liver, brain, and bone were analyzed. Additional calves from cows exposed or not exposed to anaerobically digested sludge were placed in a feed yard at weaning for a feeding period of 150 days and then were killed and necropsied. Heavy metal content of the aforementioned tissues was compared with the same tissues obtained from peer calves weaned, killed, and necropsied 150 days earlier. Zinc, Cu, and Fe were up to 11 times higher in fetal livers than in control or exposed postparturient calves. These concentrations declined after birth and stabilized at approximately the concentrations observed in adult cattle at about 12 to 14 months of age. Cadmium accumulated to a greater extent in kidneys and livers of exposed calves than in control calves. However, the accumulation did not produce a detectable effect upon the functional or morphologic characteristics of the organs examined. Other metals were present at low levels and were generally not remarkably different in control and exposed animals.
Age Factors↗
Mixing and its impact on faecal coliform removal in a stabilisation pond.
Faecal coliform removal in stabilisation ponds is highly dependent on shortest water retention times. Tracer tests have been performed in a 3,300 m2 and 1.0 m deep pond, located in Southern France, to measure the retention times and bring light on the main influencing factors and mechanisms. Tracer concentrations were monitored at the outlet and 60 locations within the pond--at the surface, mid depth and the bottom of the water column. Pond water temperatures were measured at different depths and locations, together with pH, DO and redox potential. Wind velocity and rainfall were recorded. Water quality was monitored at the inlet, outlet and within the pond. Water retention times were shown to be strongly affected by weather conditions. Windy periods appeared to favour mixing regardless of the season. In sunny periods of spring and summer, a clear stratification was observed during daytime and vanished gradually during the night, suggesting alternation of mixed and stratified hydrodynamic patterns. This alternation was shown to influence microorganism contents within and at the outlet of the pond. Accurate prediction of shortest water retention times and disinfection performance requires 3D unsteady state fluid dynamic models that are able to take the influence of wind and water temperature distribution into account.
Disinfection↗
Phonological studies of the new gas-induced agitated reactor using computational fluid dynamics.
An ozone-induced agitated reactor has been found to be very effective in degrading industrial wastewater. However, the cost of the ozone generation as well as its short residence time in reactors has restricted its application in a commercial scale. An innovated gas-induced draft tube installed inside a conventional agitated reactor was proved to effectively retain the ozone in a reactor. The setup was demonstrated to significantly promote the ozone utilization rate up to 96% from the conventional rate of 60% above the onset speed. This work investigates the mixing mechanism of an innovated gas-induced reactor for the future scale-up design by using the technique of computational fluid dynamics. A three-dimensional flow model was proposed to compute the liquid-gas free surface as well as the flow patterns inside the reactor. The turbulent effects generated by two 45 degrees pitch-blade turbines were considered and the two phases mixing phenomena were also manipulated by the Eulerian-Eulerian techniques. The consistency of the free surface profiles and the fluid flow patterns proved a good agreement between computational results and the experimental observation.
Environmental Pollution↗
Fish bile used to detect estrogenic substances in treated sewage water.
Endocrine disrupting effects on fish associated with sewage treatment effluents have been demonstrated in several studies. To investigate if the effluents from two modern Swedish sewage treatment plants contained estrogenic substances, juvenile rainbow trout were exposed to sewage water before and after the last treatment step which is a sand filter. As a biomarker for estrogenic effect, vitellogenin was analysed in the blood plasma of the exposed fish. To identify substances possibly responsible for the effect, bile fluid from the exposed fish were analysed with GC/MS. Elevated levels of vitellogenin were only seen in the fish exposed at one of the sewage treatment plants, the one with shorter residence time in the biological treatment steps, which suggests that the residence time is of importance for the ability to reduce the amount of estrogenic substances in the sewage water. The highest elevation of vitellogenin was seen in the fish exposed to water before the sand filter, which indicates that the sand filter contributes to further reduction of estrogenic substances in the sewage water. In bile from the same group of fish, considerably higher concentrations of estrone, bisphenol A and 4-nonylphenol (4.0 microg/g bile, 23 microg/g bile and 24 microg/g bile, respectively) were observed compared to bile from control fish (<0.04 microg/g bile, 0.21 microg/g bile, and 3.5 microg/g bile, respectively). The more potent steroidal estrogens were suggested to be major contributors to the observed estrogenic effect, although xenoestrogens were detected at higher concentrations in the bile fluid.
Animals↗
Best management practices for airport deicing stormwater.
With the advent of new regulations concerning aircraft deicing and management of spent aircraft deicing fluids (ADFs), many airports now face the dual challenges of simultaneously maintaining public safety and protecting the environment. This paper provides a theoretical assessment of the potential environmental impact of stormwater runoff and offers detailed current information on alternative deicing fluid application methods and materials, collection and treatment practices.
Aircraft↗
Assessment of the energy dissipation parameters inside the draft tube of a liquid spout-fluid bed.
Spouted beds are fluid-particle contactors in which the fluid is introduced centrally through a nozzle instead of a distributor plate, resulting in a regular particle circulation pattern. To assess the suitability of such sytems to environmental engineering applications such as filter backwashing and biofilm systems, a priori knowledge of the energy dissipation parameters is essential. A new model is developed for evaluating the energy dissipation parameters inside the draft tube of spout-fluid beds. The shear stress, velocity gradient, and turbulence fluctuation parameters in the draft tube of a liquid spout-fluid bed are calculated with the help of an energy equation for flows carrying suspensions and the experimentally determined pressure losses inside the draft tube and compared with results for particulately fluidized beds. A spout-fluid bed with a draft tube provides higher shear stress inside the draft tube than a fluidized bed. The mean velocity gradient in the draft tube is comparable to and higher than in a fluidized bed and increases with solids fraction. The turbulence dissipation coefficient decreases very slightlywith increasing solids fraction for both systems. Consequently, according to the model calculations, a spout-fluid bed with a draft tube can be an alternative to the classical fluidized bed filter backwashing system.
Beds↗
Fine sediment retention in storage chambers: an assessment of time-dependent effects.
The optimisation of the design of a storage chamber is generally based upon some measure of the chamber's sedimentation efficiency. In the UK, chambers that minimise the deposition of fine sediments are preferred. Previous laboratory and CFD-based studies to measure efficiency have focused on steady flow conditions. However, both the flow hydraulics within a storage chamber and the pollutant loading in the incoming sewage vary markedly during storm events. This paper outlines a CFD-based approach for determining "overall" chamber efficiency. The approach employs an unsteady volume-of-fluid multiphase model and stochastic particle tracking. Preliminary results from a simplified two-dimensional model are presented.
Environmental Monitoring↗
Novel poly (vinyl chloride) matrix membrane electrodes for the determination of phenolic pollutants in waste water.
The construction and electrochemical response characteristics of poly (vinyl chloride) matrix membrane sensors for seven phenolic compounds (phenol, o-cresol, p-cresol, p-chlorophenol, o-nitrophenol, alpha-naphthol and beta-naphthol) are described. The membranes incorporate ion association complexes of these seven phenolic anions with phenanthroline-iron(II) as electroactive materials. These sensors show linear response for phenol, o-cresol, p-cresol, p-chlorophenol, o-nitrophenol, alpha-naphthol, and beta-naphthol over wide concentration ranges, with an average anionic slope 54.3 mV per concentration decade. The suggested sensors exhibit fast response time (1 min), low determination limits (1 x 10(-5)M), good stability (2-3 weeks), reasonable selectivity to phenolic compounds in the presence of other water pollutants. The average percentage recovery was 99.78+/-0.088 for individual phenolates and 99.61+/-0.198 for phenolates in mixtures. The investigated sensors were successfully used for direct potentiometric determination of traces of these phenolic compounds in wastewater samples. Results with mean accuracy of 99.74+/-0.29%, 99.82+/-0.36%, 99.65+/-0.47%, 99.73+/-0.37%, 99.77+/-0.30%, 99.86+/-0.31% and 99.91+/-0.22% was obtained for the seven sensors, respectively. These results were compared with data obtained using the British pharamacopial method (The British Pharmacopoeia, Her Majesty's Stationary Office, London, 1993) and others (Clarke's Isolation and Identification of Drugs in Pharmaceuticals Body Fluids and Post-mortem Materials, 2nd Edition, The Pharmaceutical Press, London, 1998).
Electrodes↗