Search PubMed⌕ Search

SEARCH · Search PubMed

Results for “Poly T”

Search indexed PubMed citations on genomics, clinical trials, systematic reviews and public health. Explore titles, authors and supplied subject terms, then open the PubMed record.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 199 records · Page 11Linked to original sources
PubMed2004

Characterization and demulsification of poly(ethylene oxide)-block-poly(propylene oxide)-block-poly(ethylene oxide) copolymers.

Four poly(ethylene oxide)-block-poly(propylene oxide)-block-poly(ethylene oxide) copolymers with different molecular weights and PPO/PEO composition ratios were synthesized. The characterization of the PEO-PPO-PEO triblock copolymers was studied by surface tension measurement, UV-vis spectra, and surface pressure method. These results clearly showed that the CMC of PEO-PPO-PEO was not a certain value but a concentration range, in contrast to classical surfactant, and two breaks around CMC were reflected in both surface tension isotherm curves and UV-vis absorption spectra. The range of CMC became wider with increasing PPO/PEO composition ratio. Surface pressure Pi-A curves revealed that the amphiphilic triblock copolymer PEO-PPO-PEO molecule was flexible at the air/water interface. We found that the minimum area per molecule at the air/water interface increased with the proportion of PEO chains. The copolymers with the same mass fractions of PEO had similar slopes in the isotherm of the Pi-A curve. From the demulsification experiments a conclusion had been drawn that the dehydration speed increased with decreased content of PEO, but the final dehydration rate of four demulsifiers was approximate. We determined that the coalescence of water drops resulted in the breaking of crude oil emulsions from the micrograph.

Emulsions↗
PubMed2004

Association behavior of poly(ethylene oxide)-poly(propylene oxide)-poly(ethylene oxide) block copolymers with cationic surfactants in aqueous solution.

The association behavior of poly(ethylene oxide)-poly(propylene oxide)-poly(ethylene oxide) (PEO-PPO-PEO) block copolymers in aqueous solution with hexadecyltrimethylammonium bromide (HTAB), tetradecyltrimethylammonium bromide (TTAB), and dimethylene bis(decyldimethylammonium bromide) (10-2-10), was studied by fluorescence, viscosity, and Krafft temperature measurements. It has been observed that (EO)18(PO)31(EO)18 interacts more strongly than (EO)2(PO)15.5(EO)2 and (EO)2.5(PO)31(EO)2.5 with HTAB/TTAB due to synergistic interactions. A stronger capability of (EO)18(PO)31(EO)18 to interact with cationic surfactants arises from the greater number of electronegative EO units (total 36 EO units) than of (EO)2(PO)15.5(EO)2 (total 4 EO units) and (EO)2.5(PO)31(EO)2.5 (total 5 EO units). The antagonistic mixing behavior of present triblock polymers has been observed with 10-2-10. A difference in the mixing behavior of the latter from that of HTAB/TTAB has been attributed to its dimeric nature, which may create steric hindrances with triblock polymer components at the head group region in the mixed state.

Journal Article↗
PubMed1998

Stability of triple-helical poly(dT)-poly(dA)-poly(dT) DNA with counterions.

Structural conformation of triple-helical poly(dT)-poly(dA)-poly(dT) has been a very controversial issue recently. Earlier investigations, based on fiber diffraction data and molecular modeling, indicated an A-form conformation with C'3-endo sugar pucker. On the other hand, Raman, solution infrared spectral, and NMR studies show a B-form structure with C'2-endo sugars. In accordance with these experimental results, a theoretical model with B-form, C'2-endo sugars was proposed in 1993. In the present work we investigate the dynamics and stability of the two conformations within the effective local field approach applied to the normal mode calculations for the system. The presence of counterions was explicitly taken into account. Stable equilibrium positions for the counterions were calculated by analyzing the normal mode dynamics and free energy of the system. The breathing modes of the triple helix are shifted to higher frequencies over those of the double helix by 4-16 cm-1. The characteristic marker band for the B conformation at 835 cm-1 is split up into two marker bands at 830 and 835 cm-1. A detailed comparison of the normal modes and the free energies indicates that the B-form structure, with C'2-endo sugar pucker, is more stable than the A-form structure. The normal modes and the corresponding dipole moments are found to be in close agreement with recent spectroscopic findings.

Biophysical Phenomena↗
PubMed2003

Effect of sodium chloride on association behavior of poly(ethylene oxide)-poly(propylene oxide)-poly(ethylene oxide) block copolymer in aqueous solutions.

The effect of sodium chloride (NaCl) upon the thermally induced association behavior of poly(ethylene oxide)-poly(propylene oxide)-poly(ethylene oxide) (PEO-PPO-PEO) block copolymer, Pluronic P103, has been investigated using pyrene fluorescence spectroscopy. The critical micellization temperature (CMT) of Pluronic P103 in aqueous solution is decreased by the addition of NaCl. The standard enthalpy and entropy of micellization for Pluronic P103 in water are increased in the presence of small amounts of NaCl, but further addition of NaCl decreases the standard enthalpy and entropy of micellization. The I1/I3 ratio of pyrene in aqueous Pluronic P103 solutions at temperature below the CMT decreases with increases of NaCl concentration, which is related to the decrease of PPO solubility. The decrease in polarity of the PPO shifts the CMT toward lower temperature.

Journal Article↗
PubMed2001

Poly(D,L-lactide) foams modified by poly(ethylene oxide)-block-poly(D,L-lactide) copolymers and a-FGF: in vitro and in vivo evaluation for spinal cord regeneration.

The first goal of this study was to examine the influence that poly(ethylene oxide)-block-poly(D,L-lactide) (PELA) copolymer can have on the wettability, the in vitro controlled delivery capability, and the degradation of poly(D,L-lactide) (PDLLA) foams. These foams were prepared by freeze-drying and contain micropores (10 microm) in addition of macropores (100 microm) organized longitudinally. Weight loss, water absorption, changes in molecular weight, polymolecularity (Mw/Mn) and glass transition temperature (Tg) of PDLLA foams mixed with various amounts of PELA were followed with time. It was found that 10wt% of PELA increased the wettability and the degradation rate of the polymer foams. The release of sulforhodamine (SR) was compared for PDLLA and PDLLA-PELA foams in relation with the foam porosity. An initial burst release was observed only in the case of the 90:10 PDLLA/PELA foam. The ability of the foam of this composition to be integrated and to promote tissue repair and axonal regeneration in the transected rat spinal cord was investigated. After implantation of ca. 20 polymer rods assembled with fibrin-glue, the polymer construct was able to bridge the cord stumps by forming a permissive support for cellular migration, angiogenesis and axonal regrowth.

Animals↗
PubMed2002

Hydrogels based on poly(ethylene oxide) and poly(tetramethylene oxide) or poly(dimethyl siloxane): synthesis, characterization, in vitro protein adsorption and platelet adhesion.

In vitro protein adsorption, platelet adhesion and activation on new hydrogel surfaces, composed of poly(ethylene oxide) (PEO) and poly(tetramethylene oxide) (PTMO) or poly(dimethyl siloxane) (PDMS), were investigated. By varying PEO length (MW = 2000 or 3400), hydrophobic components (PTMO or PDMS) or polymer topology (block or graft copolymers), various physical hydrogels were produced. Their structures were verified by 1H NMR and ATR-IR and the molecular weights were determined by gel permeation chromatography. The hydrogels were soluble in a variety of organic solvents, while absorbed a significant amount of water with preserved three-dimensional structure by physical crosslinking. The dynamic contact angle measurement revealed that the surface hydrophilicity increased by incorporating longer PEO, PEO grafting, and adopting PDMS as a hydrophobic segment instead of PTMO. It was observed from in vitro protein adsorption study that the hydrogels exhibited significantly lower adsorption of human serum albumin (HSA), human fibrinogen (HFg), and IgG, when compared with Pellethane, a commercial polyurethane taken as a control. The hydrogels were attractive for HSA but not sensitive to HFg and IgG. And more than 65% of the proteins detected on the surfaces of the hydrogels were reversibly detached by being treated with an SDS solution. It was evident that the hydrogels synthesized in this study were much more resistant to platelet adhesion than the control, which might depend on the composition of proteins adsorbed on the surfaces and their degree of denaturation. Among the hydrogels tested, PEO3,4kPDMS exhibited albumin-rich and platelet-resistant surfaces, implying a potential candidate for biomaterial.

Adsorption↗
PubMed2003

Preparation and characterization of poly(lactic acid)-poly(ethylene glycol)-poly(lactic acid) (PLA-PEG-PLA) microspheres for controlled release of paclitaxel.

Microspheres of a new kind of copolymer, poly(lactic acid)-poly(ethylene glycol)-poly(lactic acid) (PLA-PEG-PLA), are proposed in the present work for clinical administration of an antineoplastic drug paclitaxel with hypothesis that incorporation of a hydrophilic PEG segment within the hydrophobic PLA might facilitate the paclitaxel release. Paclitaxel-loaded PLA-PEG-PLA microspheres of various compositions were prepared by the solvent extraction/evaporation method. Characterization of the microspheres was then followed to examine the particle size and size distribution, the drug encapsulation efficiency, the colloidal stability, the surface chemistry, the surface and internal morphology, the drug physical state and its in vitro release behavior. The effects of polymer types, solvents and drug loading were investigated. It was found that in the microspheres the PEG segment was homogeneously distributed and caused porosity. Significantly faster release from PLA-PEG-PLA microspheres resulted in comparison with the PLGA counterpart. Incorporation of water-soluble solvent acetone in the organic solvent phase further increased the porosity of the PLA-PEG-PLA microspheres and facilitated the drug release. A total of 49.6% sustained release of paclitaxel within 1 month was achieved. Potentially, the presence of PEG on the surface of PLA-PEG-PLA microspheres could improve their biocompatibility. PLA-PEG-PLA microspheres could thus be promising for the clinical administration of highly hydrophobic antineoplastic drugs such as paclitaxel.

Absorbable Implants↗
PubMed1997

Fabrication of microcapsules using poly(ethylene adipate) and a blend of poly(ethylene adipate) with poly(hydroxybutyrate-hydroxyvalerate): incorporation and release of bovine serum albumin.

Spherical reservoir-type microcapsules composed of poly(ethylene adipate) (PEAD) and 20% poly-epsilon-caprolactone (PCL II), poly(hydroxybutyrate-hydroxyvalerate) (P(HB-HV)); 10.8% HV) 20% PCL II and a blend of P(HB-HV)/PEAD 20% PCL II containing bovine serum albumin (BSA; surrogate protein)-loaded agarose have been fabricated using a double emulsion technique with solvent evaporation. P(HB-HV) and PEAD microcapsules had microporous and smooth surfaces, respectively, while blend microcapsules contained a mixture of the two. Irrespective of the fabrication polymer, microcapsules were generated in high yield (> 75%) and BSA incorporation had no significant effect on microcapsule size distribution (8-200 microns). The loss of BSA, both by partitioning into aqueous continuous phase and through the micropores of P(HB-HV) microcapsules as BSA-loaded agarose during the precipitation of the fabrication polymer concomitant with solvent evaporation, resulted in low encapsulation efficiencies (< 15%). In all cases BSA release could be monitored for up to 26 d and the amount and duration of BSA release from P(HB-HV) 20% PCL II microcapsules was influenced as much by micropore number and diameter as by the extent of reservoir loading, while BSA release from smooth PEAD microcapsules was assumed to be the result of an acute increase in membrane porosity.

Biocompatible Materials↗
PubMed2001

Understanding drug release from poly(ethylene oxide)-b-poly(propylene oxide)-b-poly(ethylene oxide) gels.

Experimental and mathematical studies were performed to understand the release mechanism of small molecular weight compounds from poly(ethylene oxide)-b-poly(propylene oxide)-b-poly(ethylene oxide) polymer gels (trademarked Pluronic by BASF Corp.) of various concentrations. Studies of the diffusion coefficient of solutes in the polymer gels were performed using a novel technique to predict movement of drugs within the gel as release occurs. Studies were also performed to determine the diffusion coefficient of water in the polymer gel, as it is this parameter that controls the dissolution rate of the polymer, and in turn, the drug release rate. A model was formulated and solved numerically to determine the controlling release mechanism. By parameter modification, this algorithm for determining the overall mass of drug released from a drug loaded gel can be used for a number of drugs and for a wide range of initial polymer concentrations. Drug release data were obtained with a novel experimental setup and were used to verify the accuracy of the overall solution of the model. The results of the model indicate that although the rate of polymer dissolution ultimately controls the drug release, about 5% of the release is due to diffusion at the gel/liquid interface, giving rise to a slightly non-linear release. It was also found that agitation speed greatly affects the dissolution rates of these polymer gels.

Drug Delivery Systems↗
PubMed1998

Plasma protein adsorption on biodegradable microspheres consisting of poly(D,L-lactide-co-glycolide), poly(L-lactide) or ABA triblock copolymers containing poly(oxyethylene). Influence of production method and polymer composition.

Biodegradable particulate systems have been considered as parenteral drug delivery systems. The adsorption of plasma proteins on micro- and nanoparticles is determined by the surface properties and may, in turn, strongly influence the biocompatibility and biodistribution of both carriers. In the present study the influence of the polymer composition and the production method of microspheres on the in vitro plasma protein adsorption were investigated using two-dimensional electrophoresis (2-DE). Microparticles were prepared from poly(l-lactide) (l-PLA), poly(d,l-lactide-co-glycolide) (PLGA), and ABA triblock copolymers containing hydrophilic poly(oxyethylene) (B-blocks) domains connected to hydrophobic polyesters (A-blocks). Two different microencapsulation methods were employed, namely the w/o/w emulsion solvent evaporation method and the spray-drying technique. It could be demonstrated that the polymer composition and, especially, the encapsulation technique, influenced the interactions with plasma proteins significantly. For example, the percentages of several apolipoproteins in the plasma protein adsorption patterns of spray-dried PLGA- and l-PLA-particles were distinctly higher when compared to the adsorption patterns of the particles produced by the w/o/w-technique. Some adsorbed proteins were found to be characteristic or even specific for particles produced by the same method or consisting of identical polymers. Polyvinyl alcohol used as stabilizer in the w/o/w-technique may decisively influence the surface properties relevant for protein adsorption. The plasma protein adsorption on particles composed of ABA copolymers was drastically reduced when compared to microspheres made from pure polyesters. The adsorption patterns of ABA-particles were dominated by albumin. The plasma protein adsorption patterns detected on the different microspheres are likely to affect their in vivo performance as parenteral drug delivery systems.

Adsorption↗
PubMed1999

Preparation of nanoparticles consisted of poly(L-lactide)-poly(ethylene glycol)-poly(L-lactide) and their evaluation in vitro.

This study describes the preparation and the evaluation of biodegradable poly(L-lactide)-poly(ethylene glycol)-poly(L-lactide) copolymer (PLA-PEG-PLA) nanoparticles containing progesterone as a model drug. PLA and PLA-PEG-PLA copolymers, whose PEG content ranged from 5.2 to 25.8% (w/w), were polymerized in our laboratory. PEG with weight-average molecular weight (Mw) 6600 or 20 000 was introduced as a hydrophilic segment into a hydrophobic PLA homopolymer. A solvent evaporation method was used to prepare the nanoparticles. The drug trapping efficiencies were around 70% and the weight-averaged mean diameters of the nanoparticles were less than 335 nm. The amount of drug released increased as the PEG content and Mw of PLA-PEG-PLA copolymers increased and the total Mw of copolymers of nanoparticles decreased. The initial burst of drug release was reduced by removing the low Mw fraction from the polymer. During the release test, both the extent to which the copolymers were degraded and the size of the nanoparticles were increased slightly by increasing the content of PEG in the polymers. Drug release from the nanoparticles could potentially be controlled by changing the PEG content, PEG Mw and total Mw of the copolymer. The molecular weight distribution (Mw/Mn, Mn: number-average molecular weight) of copolymers was also an important factor for controlled release.

Biocompatible Materials↗
PubMed2002

Room temperature phosphorescence of 6-bromo-2-naphthol in micelles of poly(ethylene oxide)-poly(propylene oxide)-poly(ethylene oxide) block copolymers and in their mixed aggregates with sodium dodecyl sulfate.

Room temperature phosphorescence (RTP) of 6-bromo-2-naphthol has been investigated in aqueous micellar solutions of poly(ethylene oxide)-poly(propylene oxide)-poly(ethylene oxide) block copolymers as well as in their mixed aggregates with sodium dodecyl sulfate. RTP of the phosphorophor was enhanced to some extent in the micelles of the block copolymers. However, marked enhancement of RTP was observed in the mixed aggregates. The enhancement of RTP is attributed to effective incorporation of the phosphorophor into the micelles and the aggregates, resulting in suppression of nonradiative deactivation of the phosphorescent state.

Micelles↗
PubMed2001

Characterization of poly(L-lactide)-block-poly(ethylene oxide)-block-poly(L-lactide) triblock copolymer by liquid chromatography at the critical condition and by MALDI-TOF mass spectrometry.

Poly(L-lactide)-block-poly(ethylene oxide)-block-poly(L-lactide) triblock copolymers (PLLA-b-PEO-b-PLLA) were fractionated in terms of the number of LLA units by liquid chromatography at the critical condition (LCCC) of PEO block. The fractionated samples were identified using MALDI-TOF mass spectrometry. The dependence of the LCCC retention of the diblock and triblock copolymers on the degree of polymerization of PLLA block(s) follows Martin's rule very well. Unlike the case of PEO-b-PLLA diblock copolymer reported earlier (Lee, H.; et al. Macromolecules 1999, 32, 4143), however, a splitting of the elution peaks containing the same number of LLA units was found. The peak splitting was ascribed to the different length distributions of PLLA blocks at the two ends of the PEO block. From the relative intensities of the peaks, the split peaks were assigned to different isomeric structures of the PLLA blocks. From these results we conclude that the interaction of the triblock copolymers with the stationary phase is affected by the distribution of the interacting blocks at the two ends of the center PEO block, in addition to the total number of LLA units in the triblock copolymer.

Journal Article↗
PubMed2006

Synthesis and characterization of RGD peptide grafted poly(ethylene glycol)-b-poly(L-lactide)-b-poly(L-glutamic acid) triblock copolymer.

Advances in tissue engineering require biofunctional scaffolds that can provide not only physical support for cells but also chemical and biological cues needed in forming functional tissues. To achieve this goal, a novel RGD peptide grafted poly(ethylene glycol)-b-poly(L-lactide)-b-poly(L-glutamic acid) (PEG-PLA-PGL/RGD) was synthesized in four steps (1) to prepare diblock copolymer PEG-PLA-OH and to convert its -OH end group into -NH(2) (to obtain PEG-PLA-NH(2)), (2) to prepare triblock copolymer PEG-PLA-PBGL by ring-opening polymerization of NCA (N-carboxyanhydride) derived from benzyl glutamate with diblock copolymer PEG-PLA-NH(2) as macroinitiator, (3) to remove the protective benzyl groups by catalytic hydrogenation of PEG-PLA-PBGL to obtain PEG-PLA-PGL, and (4) to react RGD (arginine-glycine-(aspartic amide)) with the carboxyl groups of the PEG-PLA-PGL. The structures of PEG-PLA-PGL/RGD and its precursors were confirmed by (1)H NMR, FT-IR, amino acid analysis, and XPS analysis. Addition of 5 wt % PEG-PLA-PGL/RGD into a PLGA matrix significantly improved the surface wettability of the blend films and the adhesion and proliferation behavior of human chondrocytes and 3T3 cells on the blend films. Therefore, the novel RGD-grafted triblock copolymer is expected to find application in cell or tissue engineering.

3T3 Cells↗
PubMed2006

Thermodynamic confinement and alpha-helix persistence length in poly(gamma-benzyl-L-glutamate)-b-poly(dimethyl siloxane)-b-poly(gamma-benzyl-L-glutamate) triblock copolymers.

The structure and the associated dynamics of a series of poly(gamma-benzyl-L-glutamate)-b-poly(dimethyl siloxane)-b-poly(gamma-benzyl-L-glutamate) (PBLG-b-PDMS-b-PBLG) triblock copolymers were investigated using small- and wide-angle X-ray scattering, NMR, transmission electron microscopy, and dielectric spectroscopy, respectively. The structural analysis revealed phase separation in the case of the longer blocks with defected alpha-helical segments embedded within the block copolymer nanodomains. The alpha-helical persistence length was found to depend on the degree of segregation; thermodynamic confinement and chain stretching results in the partial annihilation of helical defects.

Carbon Isotopes↗
PubMed2006

Self-consistent-field analysis of the micellization of carboxy-modified poly(ethylene oxide)-poly(propylene oxide)-poly(ethylene oxide) triblock copolymers.

The micellization properties of carboxy-modified Pluronics P85 (poly(ethylene oxide)-poly(propylene oxide)-poly(ethylene oxide) (PEO-PPO-PEO) triblock copolymers) are investigated by means of a molecularly realistic self-consistent-field theory. We consider the, so-called, carboxylic acid end-standing P85 (CAE-85) case where the carboxylic group is located at the end of both PEO parts and the carboxylic acid center-standing P85 (CAC-85) case where each of the carboxylic group presents between the PEO and PPO blocks. The micellization of these copolymers depends on the pH, the added electrolyte concentration phis, and the temperature. It is shown that the aggregation number (Nagg) decreases, whereas the critical micellization concentration (CMC) increases with pH. For the case of increasing phis, the Nagg increases and the CMC decreases. The critical micellization temperature (CMT) and cloud point temperature (CPT) increase with pH at low phis and decrease at increasing phis. The changing from CAE-85 to CAC-85 leads to increasing CMC and CMT, but lower CPT.

Journal Article↗
PubMed2005

Microviscosity in multiple regions of complex aqueous solutions of poly(ethylene oxide)-poly(propylene oxide)-poly(ethylene oxide).

Aqueous poly(ethylene oxide)-poly(propylene oxide)-poly(ethylene oxide) (PEO109-PPO41-PEO109) copolymers are nonionic surfactants that self-organize to form aggregate structures with increasing temperature or concentration. We have studied two concentrations over a range of temperatures so that the copolymers are in one of three microphases: unimers, micelles, or hydrogels formed from body centered cubic aggregates of micelles. Three different coumarin dyes were chosen based on their hydrophobicity so that different aggregate regions could be probed independently-water insoluble coumarin 153 (C153), hydrophobic coumarin 102 (C102), and the hydrophilic sodium carboxylate form of coumarin 343 (C343-). Fluorescence anisotropy experiments provide detailed information on the local microviscosity. C153 experiences a fourfold increase in reorientation time and hence microviscosity with increasing temperature through the microphase transition from unimers to micelles. C102 also shows an increase in microviscosity with temperature but smaller in magnitude and with the microphase transition shifted to higher temperature relative to C153. C343- shows only a slight sensitivity to the microphase transition. For any of the three coumarin probes, fluorescence anisotropies do not show any correlation with the microphase transition to form cubic hydrogels.

Molecular Structure↗
PubMed2006

Dynamic and static light scattering studies on self-aggregation behavior of biodegradable amphiphilic poly(ethylene oxide)-poly[(R)-3-hydroxybutyrate]-poly(ethylene oxide) triblock copolymers in aqueous solution.

The self-aggregation behavior of two amphiphilic poly(ethylene oxide)-poly[(R)-3-hydroxybutyrate]-poly(ethylene oxide) (PEO-PHB-PEO) triblock copolymer samples with nearly identical PHB block lengths but different PEO block lengths, PEO-PHB-PEO(2000-810-2000) and PEO-PHB-PEO(5000-780-5000), was studied with dynamic and static light scattering (DLS and SLS), in combination with fluorescence spectroscopy and transmission electron microscopy (TEM). The formation of polymeric micelles by the two PEO-PHB-PEO triblock copolymers was confirmed with fluorescence technique and TEM. DLS analysis showed that the hydrodynamic radius (R(h)) of the monodistributed polymeric micelles increased with an increase in PEO block length. The relative thermostability of the triblock copolymer micelles was studied by SLS and DLS at different temperatures. The aggregation number and the ratio of the radius of gyration over hydrodynamic radius were found to be independent of temperature, probably due to the strong hydrophobicity of the PHB block. The combination of DLS and SLS studies indicated that the polymeric micelles were composed of a densely packed core of hydrophobic PHB blocks and a corona shell formed by hydrophilic PEO blocks. The aggregation numbers were found to be approximately 53 for PEO-PHB-PEO(2000-810-2000) micelles and approximately 37 for PEO-PHB-PEO(5000-780-5000) micelles. The morphology of PEO-PHB-PEO spherical micelles determined by DLS and SLS measurements was further confirmed by TEM.

Biocompatible Materials↗