SEARCH · Search PubMed
Search indexed PubMed citations on genomics, clinical trials, systematic reviews and public health. Explore titles, authors and supplied subject terms, then open the PubMed record.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Crude petroleum serves as the precursor for thousands of chemicals found in a variety of commercial and industrial products. The authors present a brief background on the composition of petroleum and the production of its derivatives, a description of the common cutaneous manifestations of petroleum derivative exposure, and a review of the treatment options for these diseases.
Polychlorinated dibenzo-p-dioxins and dibenzofurans (PCDD/Fs) were analyzed in storm water collected from 15 outfalls in San Francisco Bay, California, considered representative of areas located adjacent to petroleum refineries and mixed urban/commercial/residential land uses. Storm water sampling was conducted hourly over a 12-h period at two outfalls located near the city of Oakland and the suburban community of Benicia, which represent urban and mixed urban/light industrial land uses, respectively. Sampling was conducted hourly to determine temporal changes in the concentrations and distributions of PCDD/Fs during the first major rainstorm event of the 1995/96 winter season. In addition, storm water sampling was conducted in December 1995 and February/April 1996 at six publicly owned treatment work (POTW) outfalls located adjacent to developed, undeveloped, mixed residential/commercial, and industrial lands. Storm water sampling also was conducted at five outfalls located adjacent to petroleum refineries. The sampling results were used to examine changes in PCDD/F loadings to San Francisco Bay at the onset and midway through the winter rainy season and to characterize differences in PCDD/F concentrations, if any, between refinery and nonrefinery areas. The concentrations of tetra- through octa-chlorinated homologues and 2,3,7,8-substituted congeners were assayed in filtered storm water samples according to US EPA Method 1613A. Principal components analysis (PCA) was used as an exploratory technique to examine the similarities and differences in the distributions of PCDD/Fs in storm water from different outfalls. The sampling results showed few significant differences between storm water discharged from outfalls located in mixed urban/commercial/residential areas and outfalls located adjacent to petroleum refineries. The concentrations of 2,3,7,8-TCDD were below the analytical limits of detection in all storm water samples, with the exception of samples collected after the sixth hour of sampling at the Oakland outfall. Fingerprint patterns were generally dominated by the higher chlorinated PCDD/F congeners including OCDD, OCDF, and 1,2,3,4,6,7,8-HpCDD. Total TEQs were generally below US EPA ambient water quality criteria and aquatic ecotoxicology guideline values. The results of this study strongly suggest that discrete sampling of storm water outfalls is insufficient to characterize the concentrations and distributions of persistent hydrophobic contaminants such as PCDD/Fs. In addition to surface water runoff from the city of Oakland, other nonindustrialized urban locations may represent important sources of PCDD/Fs to San Francisco Bay.http://link.springer-ny.com/link/service/journals/00244/bibs/37n3p290.html
Twenty-five samples of stratal fluids obtained from a high-temperature (60-84 degrees C) deep subsurface (1700-2500 m) petroleum reservoir of Western Siberia were investigated for the presence of dissimilatory Fe(III)-reducing microorganisms. Of the samples, 44% and 76% were positive for Fe(III) reduction with peptone and H2 respectively as electron donors. In most of these samples, the numbers of culturable thermophilic H2-utilizing iron reducers were in the order of 10-100 cells/ml. Nine strains of thermophilic anaerobic bacteria and archaea isolated from petroleum reservoirs were tested for their ability to reduce Fe(III). Eight strains belonging to the genera Thermoanaerobacter, Thermotoga, and Thermococcus were found capable of dissimilatory Fe(III) reduction, with peptone or H2 as electron donor and amorphous Fe(III) oxide as electron acceptor. These results demonstrated that Fe(III) reduction may be a common feature shared by a wide range of anaerobic thermophiles and hyperthermophiles in deep subsurface petroleum reservoirs.http://link.springer-ny. com/link/service/journals/00284/bibs/39n2p99.html
Quicklime mixing is an established solidification/stabilization technique to improve mechanical properties and immobilise contaminants in soils. This study examined the effects of quicklime mixing on the concentrations and leachability of petroleum hydrocarbon compounds, in two natural soils and on a number of artificial sand/kaolinite mixtures. Several independent variables, such as clay content, moisture content and quicklime content were considered in the study. After mixing the soils with the quicklime, pH, temperature, moisture content, Atterberg limits and concentrations of petroleum hydrocarbon compounds were determined on soil and leachate samples extracted from the treated soils. Significant decreases in concentrations of petroleum hydrocarbon compounds were measured in soils and leachates upon quicklime mixing, which may be explained by a number of mechanisms such as volatilization, degradation and encapsulation of the hydrocarbon compounds promoted by the quicklime mixing. The increase in temperature due to the exothermic hydration reaction of quicklime when in contact with porewater helps to volatilize the light compounds but may not be entirely responsible for their concentration decreases and for the decrease of heavy aliphatics and aromatics concentrations.
A differential fraction-based kinetic model (DFKM) was proposed to simulate the reaction process in view of the extremely large number of compounds in the petroleum fraction. The results of the simulation experiment on the hydrodesulfurization (HDS) process demonstrated that without considering the exact compounds, DFKM can depict the reaction processes not only of the whole petroleum fraction but of any narrow cut we are interested in. Apparently, this kind of ability, which can be considered as the 'zoom in/out' function, is very useful for the further study on the processing techniques of the petroleum fraction. In the meantime, different methods for obtaining the functions needed in DFKM were investigated and satisfactory results were presented.
The ability of electrospray ionization mass spectrometry (ESI MS) to analyze heavy aromatic petroleum fractions using silver nitrate as a reagent compound to form characteristic adduct ions has been examined. The complexation of aromatic compounds containing long alkyl substituents with the silver ion leads to the formation of abundant adduct ions such as [M + Ag]+ and [2M + Ag]+. The concentration of the [2M + Ag]+ ions can be reduced by increasing the sampling cone voltage. Molecular ions and other adduct ions may also be formed depending on the structure of the aromatic molecule. Results obtained from the analysis of representative heavy petroleum fractions and vacuum residues by the Ag+ ESI MS method and conventional ionization methods were in good agreement. The current method extends the applicability of electrospray ionization to the analysis of neutral hydrocarbons in heavy aromatic petroleum fractions. It is simple and compatible with widely available LC/MS instrumentation. The extreme complexity of the Ag
Laser-induced acoustic desorption (LIAD) coupled with a 3-T Fourier transform ion cyclotron resonance mass spectrometer (FT-ICR) allows the simultaneous analysis of both the nonpolar and polar components in petroleum distillates. The LIAD/FT-ICR method was validated by examining model compounds representative of the various classes of polar and nonpolar hydrocarbons commonly found in petroleum. LIAD successfully desorbs all the compounds as intact neutral molecules into the FT-ICR. Electron ionization (EI) at low energies (10 eV) and chemical ionization using cyclopentadienyl cobalt radical cation (CpCo*+) were employed to ionize the desorbed molecules. The EI experiments lead to extensive fragmentation of many of the hydrocarbon compounds studied. However, the CpCo*+ ion ionizes all the hydrocarbon compounds by producing only pseudomolecular ions without other fragmentation, with the exception of one compound (*CH3 loss occurs). Examination of two different petroleum distillate samples revealed hundreds of compounds. The most abundant components have an even molecular weight; i.e., they are likely to contain no (or possibly an even number of) nitrogen atoms.
A mouse preimplantation embryo culture system was utilized to characterize the in vitro embryotoxicity of petroleum creosote (PC), a complex mixture of aliphatic and polycyclic aromatic hydrocarbons. ICR mouse embryos, collected on d 3.5 of gestation (blastocyst stage), were exposed for 1 h to varying concentrations of petroleum creosote in serum-supplemented culture medium. Parallel embryo cultures were exposed to PC in medium supplemented with rodent hepatic S9 microsomal fractions to monitor the role of bioactivation in PC-induced embryotoxicity. Embryos were subsequently cultured in control medium for 72 h and observed for viability as well as specific, time-dependent developmental end points--hatching and attachment to the culture dish at 48 h, and trophoblastic outgrowth with a distinct inner cell mass at 72 h. Embryonic viability varied in inverse proportion to PC concentration. Petroleum creosote caused embryolethal effects at concentrations of 33 micrograms/ml of culture medium and 54 micrograms/ml. Embryotoxicity was not observed at 22 micrograms/ml. Culture supplementation with rodent hepatic S9 fractions did not modify, either qualitatively or quantitatively, the embryotoxicity of PC in vitro. These findings implicate PC as a prenatal toxicant and support environmental and human health concerns regarding PC exposure from PC-containing chemical waste sites.
An R-form lipopolysaccharide (LPS) extracted from Klebsiella strain LEN-111 (O3-:K1-) by the phenol-chloroform-petroleum ether method was compared with that extracted by the phenol-water method in the ability to form a hexagonal assembly. The LPS which was extracted by the phenol-water method and dialyzed against tap water to remove phenol showed ribbon-like structures, and it formed a hexagonal lattice structure with a lattice constant of 14.5 +/- 0.3 nm when it was precipitated by addition of two volumes of 10 mM MgCl2-ethanol. The LPS which was extracted by the phenol-chloroform-petroleum ether method and lyophilized consisted of ribbon-like structures and their fragments and it often formed small pieces of a hexagonal lattice, although the LPS before lyophilization did not form such a lattice. When the LPS extracted by the phenol-chloroform-petroleum ether method was precipitated by addition of two volumes of 10 mM MgCl2-ethanol, it formed essentially the same hexagonal lattice structure as that formed by the LPS extracted by the phenol-water method. From these results it is concluded that the ability of the LPS to form a hexagonal lattice structure does not depend upon the method of its extraction from bacterial cells.
In recent years, comprehensive two-dimensional gas chromatography (GC x GC) have been used widely, and the applications of this technique to many fields have already been reported. In the standard method of oil analysis, the concentrations of aromatics and naphthalene hydrocarbons in light petroleum products must be detected by more than two methods. Mono-aromatics, di-aromatics etc. in light petroleum products were detected only by comprehensive two-dimensional gas chromatography. After the proper selection of column system and optimization of chromatographic conditions, the method can achieve the group separations of paraffins, olefins, naphthenes, aromatics with 1 to 2 rings and some target components in light petroleum products with good reproducibility and good precision. The recoveries of standard compounds were 89.5% - 106.1%, and the relative standard deviations of repeatedly detecting the components were all lower than 5.8%. It took only 30 min to finish a determination.
Investigation of heavy metal contamination levels as well as their association types with substrates in petroleum-contaminated surface soil was carried out using modified sequential extraction method. In that way, remobilization capacity of metal cations, both in natural conditions and in accidents, has been studied. Moreover, partitioning of heavy metals, originating from spilt oil derivative, among surface soil substrates was estimated. Extreme contamination with lead was discovered, as well as the increased concentrations of zinc and copper. Oil-derived Pb and Zn were found to be distributed between carbonates and amorphous Fe-oxides, whereas Cu was found to be dominantly associated with amorphous Fe-oxides. Appreciable amounts of these metals were also found to be incorporated into more resistant structures. In petroleum-contaminated surface soil, substrates of cadmium are carbonates, whereas nickel has the great affinity toward hydrous Mn-oxides. Cd is proven to be the most mobile metal in oil-contaminated surface soil.
In this article, we review the fundamental phenomenon of oxygenation within the overriding context of petroleum-industry effluents and the other oxygen demanding wastes in Niger Delta, Nigeria. Drill cuttings, drilling mud (fluids used to stimulate the production processes), and accidental discharges of crude petroleum constitute serious land and water pollution in the oil-bearing province. Effluents from other industrial establishments such as distilleries, pulp and paper mills, fertilizer plants, and breweries, as well as thermal effluents, plant nutrients (such as nitrates and phosphates), and eroded sediments have also contributed to the pollution of their surrounding environment. Since these wastes are oxygen-demanding in nature, their impact on the recipient environment can be reversed by the direct application of simple chemistry. The wastes can be reduced, particularly in natural bodies of water, by direct oxidation-reduction processes or simple chemical combinations, acid-base reactions, and solubility equilibria; these are pH- and temperature-dependent. A shift in pH and alkalinity affects the solubility equilibria of Na+, Cl-, SO(2-), NO3(-), HCO3(-), and PO4(3-), and other ions and compounds.
A petroleum pitch sample collected in a carbon electrode factory was studied using a series of in vivo assays for genotoxicity and enzymatic induction capability. Rats were treated with the petroleum derivative in three doses: 100, 50, and 10 mg/kg body weight. The treatment produced a rapid excretion of mutagenic substances in the urines of the first 24 hr only in rats treated with high doses (100 and 50 mg/kg). No faecal mutagenic activity was observed. Analyses of urinary thioethers showed that urinary metabolites derived from the compounds present in the pitch-sample at the lowest dose-administered (10 mg/kg) were eliminated primarily as cysteine conjugates. The pitch sample was found to be a good inducer of pulmonary and hepatic aryl hydrocarbon hydroxylase, especially after a 50 mg/kg dose. Urinary D-glucaric acid content was always statistically increased in treated animals compared with controls, confirming the enzymatic induction activity. Hepatic glutathione-S-transferase activity increased following treatment with 50 and 10 mg/kg doses.
During petroleum refining, a large number of products are generated which have varying chemical and physical properties. These are known in the industry as petroleum streams. In order to characterize their carcinogenic activity, a number of these commercially produced streams were administered to C3H/HeJ mice in chronic dermal bioassays. The bioassays were conducted using one of two study designs: the first set of test materials was applied for a lifetime and the second set for 24 months. In the lifetime study, the last mice in the test groups survived for periods of 31 to 32 months. Middle distillates, boiling in the range 115-390 degrees C, were found to decrease the lifespan of exposed mice compared to controls or streams of higher and lower boiling ranges. These middle distillate streams included straight run kerosine, hydrodesulfurized middle distillate, straight run middle distillate, light catalytic cracked distillate, and 90/10% and 70/30% mixtures of the last two. The middle distillate streams also proved to be active as carcinogens, with tumor incidence ranging from 16 to 67%. Light alkylate naphtha, heavy catalytic reformed naphtha, vacuum residuum, and unleaded gasoline did not demonstrate significant carcinogenic potency. Heavy thermal cracked naphtha, heavy catalytic cracked naphtha, and hydrotreated light naphthenic distillate were dermal carcinogens of low potency in this study. Administration of light catalytic cracked naphtha led to a low incidence of very late developing tumors with a mean latency of 118 weeks. Application of the 0.1% solution of catalytic cracked clarified oil in toluene did not result in a significant incidence of tumors, but the 10% solution caused almost 100% mortality and 100% tumor incidence in 12 months. There was no correlation between carcinogenic potency and the indices of irritation, alopecia, erythema, and scabbing. Only two of the streams tested, hydrotreated light naphthenic distillate and 10% catalytic cracked clarified oil, contain polynuclear aromatic hydrocarbons (PNAs) and may be presumed to be complete carcinogens. The middle distillates and heavy naphthas are nonmutagenic and essentially free of PNAs. Their activity may result from promotion of already-initiated skin sites. Where comparisons could be made, reducing the exposure period from a lifetime (29-32 months) to 24 months did not change the evaluations of stream carcinogenicity except in the case of light catalytic cracked naphtha where six of the seven mice that developed tumors did so after 24 months.
Topical application of certain petroleum middle distillates (PMD) to mice produces skin tumors after long latency, and initiation/promotion protocols indicate that this effect is associated with their tumor promoting activity. Since induction of sustained, potentiated epidermal hyperplasia is predictive of promoting activity, five compositionally distinct PMD [hydrodesulfurized kerosene (API 81-07); hydrodesulfurized PMD (API 81-10); odorless light petroleum hydrocarbons; severely hydrotreated light vacuum distillate (LVD); and lightly refined paraffinic oil (LRPO)] were assessed for their effects on epidermal hyperplasia. PMD were administered (2 x/week for 2 weeks) to skin of CD-1 mice. Four quantitative biomarkers of epidermal hyperplasia were evaluated: epidermal thickness, number of nucleated epidermal cells per unit length of basement membrane, labeling (BrdUrd) index of epidermal cells, and induction of epidermal ornithine decarboxylase (ODC) activity. As positive controls, 12-O-tetradecanoylphorbol-13-acetate (TPA) and n-dodecane were utilized. PMD-induced skin irritation was evaluated visually and/or histopathologically. All five PMD produced dose-dependent, skin irritation and epidermal hyperplasia. On a weight basis the magnitude of the maximal PMD-induced effects was similar to that produced by n-dodecane, but > 1000-fold less than that produced by TPA. Epidermal hyperplasia and subacute skin irritancy produced by the five PMD were similar. Of the four short-term markers of tumor promotion assessed, labeling index and epidermal ODC activity were predictive of the relative promoting activities of those PMD for which tumorigenicity bioassay data are available, i.e., API 81-07 > API 81-10 > LRPO. An apparent discrepancy to the predictability of epidermal ODC activity occurred with LRPO:toluene [1:1 (v/v)]. This mixture is nontumorigenic, yet significantly induced epidermal ODC activity. This mixture, however, produced severe epidermal toxicity that precluded any meaningful analysis of short-term biomarkers in relationship to biological activity.
The Ames Salmonella/microsomal activation mutagenesis assay has been adapted to improve sensitivity to complex hydrocarbon mixtures produced by the refining of petroleum. Extraction of oil samples with dimethyl sulfoxide produces aqueous-compatible solutions that more easily interact with the tester bacteria. These extracts, therefore, produce higher revertant values than do equivalent volumes of oil delivered neat or dissolved in organic solvent. Parallel increases in the liver microsomal S-9 concentration further improve the sensitivity of the assay, allowing detection of mutagenicity in otherwise inactive samples. The effect of increased microsomal fraction from rodent liver is apparently attributable to the higher levels of activating enzymes rather than to the concomitant increase in the overall hydrophobicity of the test system. The modified assay has been used to rank thirteen petroleum-derived oils and a corn oil control for relative mutagenic activity. This ranking closely correlates (r = 0.97) with potency rankings of the same samples previously determined from dermal carcinogenicity bioassays.
CD-1 mice were given oral doses of 0-16 ml/kg/day for five days of Prudhoe Bay (PBCO), South Louisiana and Arabian Light crude oils, Bunker C oil (BCO), mineral oil (MO) and corn oil. Minor decreases in packed cell volume and increases in mean corpuscular hemoglobin concentration occurred after ingestion of crude oils and BCO. Dietary depletion of vitamin E and selenium failed to enhance hematological changes. Pronounced liver enlargement and atrophy of thymus and spleen accompanied ingestion of all petroleum oils except MO and were shown to be dependent on dose of PBCO. Concentration of RNA and total RNA were increased while total DNA, but not concentration of DNA, was increased in enlarged livers. Liver enlargement was attributed primarily to hyperplasia with an additional contribution due to hypertrophy. The severe hemolytic anemia reported in marine birds that ingested PBCO was not reproduced in mice. Liver enlargement and lymphoid tissue atrophy were similar to those reported in other species exposed to petroleum oils.
Artificially incubated mallard eggs were treated externally with 5 microliter of No. 2 fuel oil or 5 microliter of Southern Louisiana crude oil at various times during the incubation period. Embryos were most sensitive to petroleum during the first 10 days of incubation. Southern Louisiana crude oil was more toxic to mallard embryos than No. 2 fuel oil. Hatching weights of ducklings from treated eggs were usually not different from hatching weights of control ducklings. Petroleum may cause bill abnormalities among embryos exposed to a lethal amount of oil early in incubation, but few external malformations of any kind were observed among survivors of the oil exposure. The breeding effort of colonial aquatic birds would be in the greatest danger from oil contamination when a large portion of the birds are in the early stages of incubation.