Search PubMed⌕ Search

SEARCH · Search PubMed

Results for “Nanostructures”

Search indexed PubMed citations on genomics, clinical trials, systematic reviews and public health. Explore titles, authors and supplied subject terms, then open the PubMed record.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 199 records · Page 11Linked to original sources
PubMed2006

New benchmark for water photooxidation by nanostructured alpha-Fe2O3 films.

Thin films of silicon-doped Fe2O3 were deposited by APCVD (atmospheric pressure chemical vapor deposition) from Fe(CO)5 and TEOS (tetraethoxysilane) on SnO2-coated glass at 415 degrees C. HRSEM reveals a highly developed dendritic nanostructure of 500 nm thickness having a feature size of only 10-20 nm at the surface. Real surface area determination by dye adsorption yields a roughness factor of 21. XRD shows the films to be pure hematite with strong preferential orientation of the [110] axis vertical to the substrate, induced by silicon doping. Under illumination in 1 M NaOH, water is oxidized at the Fe2O3 electrode with higher efficiency (IPCE = 42% at 370 nm and 2.2 mA/cm2 in AM 1.5 G sunlight of 1000 W/m2 at 1.23 VRHE) than at the best reported single crystalline Fe2O3 electrodes. This unprecedented efficiency is in part attributed to the dendritic nanostructure which minimizes the distance photogenerated holes have to diffuse to reach the Fe2O3/electrolyte interface while still allowing efficient light absorption. Part of the gain in efficiency is obtained by depositing a thin insulating SiO2 interfacial layer between the SnO2 substrate and the Fe2O3 film and a catalytic cobalt monolayer on the Fe2O3 surface. A mechanistic model for water photooxidation is presented, involving stepwise accumulation of four holes by two vicinal iron or cobalt surface sites.

Adsorption↗
PubMed2005

Combustion synthesis as a novel method for production of 1-D SiC nanostructures.

1-D nanostructures of cubic phase silicon carbide (beta-SiC) were efficiently produced by combustion synthesis of mixtures containing Si-containing compounds and halocarbons in a calorimetric bomb. The influence of the operating parameters on 1-D SiC formation yield was studied. The heat release, the heating rate, and the chamber pressure increase were monitored during the process. The composition and structural features of the products were characterized by elemental analysis, X-ray diffraction, differential thermal analysis/ thermogravimetric technique, Raman spectroscopy, scanning and transmission electron microscopy, and energy-dispersive X-ray spectrometry. This self-induced growth process can produce SiC nanofibers and nanotubes ca. 20-100 nm in diameter with the aspect ratio higher than 1000. Bulk scale Raman studies showed the product to be comprised of mostly cubic polytype of SiC and that finite size effects are present. We believe that the nucleation mechanism involving radical gaseous species is responsible for 1-D nanostructures growth. The present study has enlarged the family of nanofibers and nanotubes available and offers a possible, new general route to 1-D crystalline materials.

Air↗
PubMed2005

Electrochemical growth of nickel hollow nanostructures on copper substrates.

We have shown hollow Ni nanonodules with outer diameters of 80-200 nm and wall thicknesses of 5-25 nm could be prepared by electrochemical deposition in the NiCl2 + dimethyl sulfoxide + C2H4O3 + H2O system, and the products were high purity. In particular, Ni hollow nanonodule structures or highly assembling Ni hollow nanostructures can be selected by varying the compositions of the solvent mixture. Apart from the hollow grain size, the wall thickness can also easily be controlled by varying the electrochemical parameters, salt concentration, and deposition time. The typical coercivity of Ni hollow nanostructures with particle sizes of about 100-150 nm was much bigger than that of the bulk Ni.

Copper↗
PubMed2006

Electrochemical fabrication of two-dimensional palladium nanostructures as substrates for surface enhanced Raman scattering.

Two-dimensional palladium (Pd) nanostructures have been fabricated by electrochemical deposition of Pd onto an indium tin oxide glass substrate modified with a thin flat film of polypyrrole or a nanofibril film of polyaniline. The experimental results demonstrated that the morphology of Pd nanoparticles strongly depended on the properties of conducting polymers and the conditions of electrochemical deposition. Two-dimensional nanostructures composed of flower-like (consisting of staggered nanosheets) or pinecone-like Pd nanoparticles were successfully synthesized. They can be used as substrates for surface-enhanced Raman scattering after partly decomposing the polymer components by heating in air, and the enhancement factor of the substrate composed of flower-like Pd nanoparticles was measured to be as high as 105 for 4-mercaptopyridine.

Electrochemistry↗
PubMed2006

Double-layered TiO2-SiO2 nanostructured films with self-cleaning and antireflective properties.

Dual function of self-cleaning and antireflection can be created in double-layered TiO2-SiO2 nanostructured films. The film were prepared by (1) layer-by-layer deposition of multilayered SiO2 nanoparticles with polydiallyldimethylammonium (PDDA) cations, (2) layer-by-layer deposition of multilayered titanate nanosheets with polications on PDDA/SiO2 multilayer films, and (3) burning out the polymer and converting titanate nanosheets into TiO2 by hearing at 500 degrees C. The as-prepared films, consisting of a porous SiO2 bottom layer and a dense TiO2 top layer, improved the transmittance of glass or quartz substrates, as demonstrated by transmission spectra collected at normal incidence. The photocatalytic properties of the films were studied by the change of the water contact angle together with the decay of the IR absorption of the hydrocarbon chain of octadecylphosphonic-acid-modified films under 2.6 mW cm-2 UV illumination. Both the antireflective and the photocatalytic properties of the films were dependent on the number of PDDA/nanosheet bilayers deposited. however, excellent surface wettability of the films for water was obtained, independent of the preparation conditions. The experimental findings are discussed in terms of the special structure of the double-layered nanostructured film.

Catalysis↗
PubMed2006

Synthesis of hybrid CdS-Au colloidal nanostructures.

We explore the growth mechanism of gold nanocrystals onto preformed cadmium sulfide nanorods to form hybrid metal nanocrystal/semiconductor nanorod colloids. By manipulating the growth conditions, it is possible to obtain nanostructures exhibiting Au nanocrystal growth at only one nanorod tip, at both tips, or at multiple locations along the nanorod surface. Under anaerobic conditions, Au growth occurs only at one tip of the nanorods, producing asymmetric structures. In contrast, the presence of oxygen and trace amounts of water during the reaction promotes etching of the nanorod surface, providing additional sites for metal deposition. Three growth stages are observed when Au growth is performed under air: (1) Au nanocrystal formation at both nanorod tips, (2) growth onto defect sites on the nanorod surface, and finally (3) a ripening process in which one nanocrystal tip grows at the expense of the other particles present on the nanorod. Analysis of the hybrid nanostructures by high-resolution TEM shows that there is no preferred orientation between the Au nanocrystal and the CdS nanorod, indicating that growth is nonepitaxial. The optical signatures of the nanocrystals and the nanorods (i.e., the surface plasmon and first exciton transition peaks, respectively) are spectrally distinct, allowing the different stages of the growth process to be easily monitored. The initial CdS nanorods exhibit band gap and trap state emission, both of which are quenched during Au growth.

Air↗
PubMed2004

Photoluminescence resulting from semiconductor-metal solid solution observed in one-dimensional semiconductor nanostructures.

A narrow band photoluminescence (PL) emission peak resulting from CdS-Au solid solution was observed when growing one-dimensional nanostructures of CdS via the vapor-liquid-solid mechanism by using Au as the catalyst. This emission peak was located at 680 nm, a wavelength longer than the near band edge emission of CdS at 520 nm, and was shown not to be caused by the usual trap states of CdS which lead to a broad band emission. Here, the one-dimensional nanostructures of CdS were grown in a simple, low-temperature (360 degrees C) metal-organic chemical vapor deposition process with a single source precursor of CdS. Straight nanowires of diameter 50-70 nm and wormlike nanorods of diameter 100-200 nm were obtained. Both the upper and lower portions of the nanorods/nanowires possessed single crystallinity as judged from the corresponding high-resolution transmission electron microscopy images and selected area electron diffraction data. This work demonstrates the feasibility of adjusting PL emission peaks of optoelectronic semiconductors through alloying with metals.

Cadmium Compounds↗
PubMed2005

Core-shell nanostructures from single poly(N-vinylcaprolactam) macromolecules: stabilization and visualization.

Formation of core-shell poly(N-vinylcaprolactam) (PVCL) single-molecule nanostructures due to interaction of PVCL with metal ions was studied using transmission electron microscopy, 13C NMR, and light scattering. This study demonstrates that addition of CoCl2 to PVCL in its globular conformation yields unimolecular core-shell polymer particles with the core decorated with Co(II) ions. The crucial condition for formation of well-defined unimolecular nanostructures is the presence of stable globular aggregates in aqueous solution. Moreover, the metal ions should have a sufficiently high coordination number (higher than 2) to provide a cross-linking and stabilization of the core.

Caprolactam↗
PubMed2006

Anion effect on the nanostructure of a metal ion binding self-assembling peptide.

Effects of copper salts containing different anions (SO(4)(2)(-), Cl(-), and NO(3)(-)) on the self-assembly of a designed peptide EAK16(II)GGH with affinity for Cu(2+) have been investigated. The peptide secondary structure, self-assembled nanostructures, and surface activity were observed to depend strongly on the type of anion. Over a salt concentration range from 0.05 to 10.0 mM, SO(4)(2)(-) induced long fiber formation, whereas Cl(-) and NO(3)(-) caused short fiber formation. The fiber length increased with copper sulfate concentration, but the concentration of copper chloride and copper nitrate did not affect the peptide nanostructures significantly. Analysis by Fourier transform infrared spectroscopy (FTIR) revealed that the addition of the copper salts tended to cause the peptide conformation to change from alpha-helix/random coil to beta-sheet, the extent to which depended on the anion type. This evidence of the anion effect was also supported by surface tension measurements using the axisymmetric drop shape analysis-profile (ADSA-P) technique. An explanation for the effect of anions on the peptide self-assembly was proposed. The divalent anion SO(4)(2)(-) might serve as a bridge by electrostatically interacting with two lysine residues from different peptide molecules, promoting beta-sheet formation. The extensive beta-sheet formation may further promote peptide self-assembly into long fibers. On the other hand, monovalent anions Cl(-) and NO(3)(-) may only electrostatically interact with one charged residue of the peptide; hence, a mixed secondary structure of alpha-helix/random coil and beta-sheet was observed. This observation might explain the predominant formation of short fibers in copper chloride and copper nitrate solutions.

Anions↗
PubMed2006

Dynamics of polymorphic nanostructures: from growth to collapse.

The deposition of preformed clusters on surfaces offers new possibilities to build complex artificial nanostructures, the shape of which depends on the cluster size. We describe routes for generating unusual polymorphic nanoislands, which constitute unique platforms for exploring instabilities. As coverage increases, the constraints accumulated in such nanostructures induce spectacular flattening collapse processes, which are not observed when the constraints are imposed by the substrate.

Computer Simulation↗
PubMed2006

Composite-hydroxide-mediated approach for the synthesis of nanostructures of complex functional-oxides.

We demonstrate a generic approach for the synthesis of single-crystal complex oxide nanostructures of various structure types, such as perovskites, spinels, monoclinic, corundum, CaF(2) structured, tetragonal, and even metal hydroxides. The method is based on a reaction between a metallic salt and a metallic oxide in a solution of composite-hydroxide eutectic at approximately 200 degrees C and normal atmosphere without using an organic dispersant or capping agent. The synthesis technique is cost-effective, one-step, easy to control, and is performed at low temperature and normal atomospheric pressure. The technique can be expanded to many material systems, and it provides a general, simple, convenient, and innovative strategy for the synthesis of nanostructures of complex oxides with important scientific and technological applications in ferroelectricity, ferromagnetism, colossal magnetoresistance, fuel cell, optics, and more.

Calcium Compounds↗
PubMed2006

Heparin binding nanostructures to promote growth of blood vessels.

Controlling new blood vessel formation is of interest in regenerative medicine and cancer treatment. Heparin, a biopolymer that binds to angiogenic growth factors, was used to nucleate the self-assembly of nanostructures from designed peptide amphiphile molecules. This process yields rigid nanofibers that display heparin chains to orient proteins for cell signaling. In vivo, the nanostructures stimulated extensive new blood vessel formation using nanogram amounts of growth-factor proteins that by themselves did not induce any detectable angiogenesis.

Angiogenic Proteins↗
PubMed2006

Cross-linked block copolymer micelles: functional nanostructures of great potential and versatility.

Supramolecular self assembly techniques have provided a versatile means by which to selectively assemble polymer molecules into well-defined three dimensional core-shell nanostructures. The covalent stabilisation and tailoring of these dynamic nanostructures can be achieved using a range of chemistries within the assembly to afford robust functional nanoparticles. Many examples of the stabilisation, functionalisation and decoration of these nanoparticles have been reported in the literature and this tutorial review will focus on these recent developments and highlight their potential applications.

Cross-Linking Reagents↗
PubMed2006

Structure of vapour deposited adenine on a nanostructured perovskite surface studied by STM.

The structures of vapour deposited layers of adenine on a nanostructured SrTiO3(001) surface have been investigated by scanning tunneling microscopy (STM). The STM images reveal details of self-organization of adenine monolayers in which adsorption is controlled both by substrate nanostructure and by intermolecular H-bonding of adenine molecules. Detailed examination of STM images suggests that at least three different ordering structures are possible and two distinct orientations may exist with opposite chirality.

Adenine↗
PubMed2006

Ordered 2-D and 3-D nanostructured amphiphile self-assembly materials stable in excess solvent.

Amphiphile lyotropic liquid crystalline self-assembly materials are being used for a diverse range of applications. Historically, the most studied lyotropic liquid crystalline phase is probably the one-dimensional (1-D) lamellar phase, which has been employed as a model system for biomembranes and for drug delivery applications. In recent years, the structurally more complex 2-D and 3-D ordered lyotropic liquid crystalline phases, of which reversed hexagonal (H(2)) and reversed cubic phases (v(2)) are two prominent examples, have received growing interest. As is the case for the lamellar phase, these phases are frequently stable in excess water, which facilitates the preparation of nanoparticle dispersions and makes them suitable candidates for the encapsulation and controlled release of drugs. Integral membrane protein crystallization media and templates for the synthesis of inorganic nanostructured materials are other applications for 2-D and 3-D amphiphile self-assembly materials. The number of amphiphiles identified as forming nanostructured reversed phases stable in excess solvent is rapidly growing. In this article, different classes of amphiphiles that form reversed phases in excess solvent are reviewed, with an emphasis on linking phase behavior to amphiphile structure. The different amphiphile classes include: ethylene oxide-, monoacylglycerol-, glycolipid-, phosphatidylethanolamine-, and urea-based amphiphiles.

Chemistry, Physical↗
PubMed2006

Designed aromatic homo-dipeptides: formation of ordered nanostructures and potential nanotechnological applications.

Molecular self-assembly offers new routes for the fabrication of novel materials at the nano-scale. Peptide-based nanostructures represent nano-objects of particular interest, as they are biocompatible, can be easily synthesized in large amounts, can be decorated with functional elements and can be used in various biological and non-biological applications. We had previously revealed the formation of highly ordered tubular structures by the diphenylalanine peptide, the core recognition motif of Alzheimer's beta-amyloid polypeptide, due to specific aromatic interactions. We further confirmed this model and demonstrated that a non-charged peptide analogue, Ac-Phe-Phe-NH2, self-assembled into similar tubular structures. We later explored other amine and carboxyl modified diphenylalanine peptide analogues and revealed that these dipeptides can form ordered tubular structures at the nanometric scale. Moreover, a very similar peptide, the diphenylglycine, self-assembled into ordered nano-spherical assemblies. Here we extend our research and explore the self-assembly of other homo-aromatic dipeptides in which their phenyl side-chains are modified with halogen atoms (di-para-fluoro-Phe, di-pentafluoro-Phe, di-para-iodo-Phe), additional phenyl groups (di-4-phenyl-Phe), or with nitro substitutions (di-para-nitro-Phe). We also probed the effect of the alteration of the phenyl groups with naphtyl groups (di-D-1-Nal and di-D-2-Nal). In all cases, well-ordered nanostructures were obtained and studied by scanning electron microscopy, transmission electron microscopy and vibrational spectroscopy. Taken together, the current work and previous ones define the homo-aromatic dipeptide as a central motif for the formation of ordered self-assembled tubular, spherical and two-dimensional structures at the nano-scale.

Amino Acid Sequence↗
PubMed2006

Determining suitable lego-structures to estimate stability of larger peptide nanostructures using computational methods.

Nanofibers, nanofilms and nanotubes constructed of one to four strands of oligo-alpha- and oligo-beta-peptides were obtained by using carefully selected building units. Lego-type approaches based on thermoneutral isodesmic reactions can be used to reconstruct the total energies of both linear and tubular periodic nanostructures with acceptable accuracy. Total energies of several different nanostructures were accurately determined with errors typically falling in the subchemical range. Thus, attention will be focused on the description of suitable isodesmic reactions that have enabled the determination of the total energy of polypeptides and therefore offer a very fast, efficient and accurate method to obtain energetic information on large and even very large nanosystems.

Algorithms↗