Search PubMed⌕ Search

SEARCH · Search PubMed

Results for “Computer Graphics”

Search indexed PubMed citations on genomics, clinical trials, systematic reviews and public health. Explore titles, authors and supplied subject terms, then open the PubMed record.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,801 records · Page 100Linked to original sources
PubMed2000

DNase I digestion reveals alternating asymmetrical protection of the nucleosome by the higher order chromatin structure.

DNase I was used to probe the higher order chromatin structure in whole nuclei. The digestion profiles obtained were the result of single-stranded cuts and were independent of pH, type of divalent ion and chromatin repeat length. Furthermore, the protection from digestion of the DNA at the entry/exit points on the nucleosome was found to be caused not by the H1/H5 histone tails, but by the compact structure that these proteins support. In order to resolve symmetry ambiguities, DNase I digestion fragments over several nucleosome repeat lengths were analysed quantitatively and compared with computer simulations using combinations of the experimentally obtained rate constants (some of which were converted to 0 to simulate steric protection from DNase I digestion). A clear picture of precisely defined, alternating, asymmetrically protected nucleosomes emerged. The linker DNA is inside the fibre, while the nucleosomes are positioned above and below a helical path and/or with alternating orientation towards the dyad axis. The dinucleosomal modulation of the digestion patterns comes from alternate protection of cutting sites inside the nucleosome and not from alternating exposure to the enzyme of the linker DNA.

Animals↗
PubMed2001

Induced fit DNA recognition by a minor groove binding analogue of Hoechst 33258: fluctuations in DNA A tract structure investigated by NMR and molecular dynamics simulations.

NMR analysis and molecular dynamics simulations of d(GGTAATTACC)(2) and its complex with a tetrahydropyrimidinium analogue of Hoechst 33258 suggest that DNA minor groove recognition in solution involves a combination of conformational selection and induced fit, rather than binding to a preorganised site. Analysis of structural fluctuations in the bound and unbound states suggests that the degree of induced fit observed is primarily a consequence of optimising van der Waals contacts with the walls of the minor groove resulting in groove narrowing through: (i) changes in base step parameters, including increased helical twist and propeller twist; (ii) changes to the sugar-phosphate backbone conformation to engulf the bound ligand; (iii) suppression of bending modes at the TpA steps. In contrast, the geometrical arrangement of hydrogen bond acceptors on the groove floor appears to be relatively insensitive to DNA conformation (helical twist and propeller twist). We suggest that effective recognition of DNA sequences (in this case an A tract structure) appears to depend to a significant extent on the sequence being flexible enough to be able to adopt the geometrically optimal conformation compatible with the various binding interactions, rather than involving 'lock and key' recognition.

Base Sequence↗
PubMed1981

The nucleotide sequence of the large ribosomal RNA gene and the adjacent tRNA genes from rat mitochondria.

We have sequenced the Eco R(1) fragment D from rat mitochondrial DNA. It contains one third of the tRNA (Val) gene (the remaining part has been sequenced from the 3' end of the Eco R(1) fragment A) the complete gene for the large mt 16S rRNA, the tRNA (Leu) gene and the 5' end of an unidentified reading frame. The mt gene for the large rRNA from rat has been aligned with the homologous genes from mouse and human using graphic computer programs. Hypervariable regions at the center of the molecule and highly conserved regions toward the 3' end have been detected. The mt gene for tRNA Leu is of the conventional type and its primary structure is highly conserved among mammals. The mt gene for tRNA(Val) shows characteristics similar to those of other mt tRNA genes but the degree of homology is lower. Comparative studies confirm that AGA and AGG are read as stop codons in mammalian mitochondria.

Animals↗
PubMed2003

DSMM: a Database of Simulated Molecular Motions.

We describe a Database of Simulated Molecular Motions (DSMM). This database is designed to serve as a single searchable site for locating movies and animations from simulations of biomolecules. DSMM is accessible via a webserver at: http://projects.villa-bosch.de/mcm/database/dsmm.

Computer Graphics↗
PubMed2003

JVirGel: Calculation of virtual two-dimensional protein gels.

We developed JVirGel, a collection of tools for the simulation and analysis of proteomics data. The software creates and visualizes virtual two-dimensional (2D) protein gels based on the migration behaviour of proteins in dependence of their theoretical molecular weights in combination with their calculated isoelectric points. The utilization of all proteins of an organism of interest deduced from genes of the corresponding genome project in combination with the elimination of obvious membrane proteins permits the creation of an optimized calculated proteome map. The electrophoretic separation behaviour of single proteins is accessible interactively in a Java(TM) applet (small application in a web browser) by selecting a pI/MW range and an electrophoretic timescale of interest. The calculated pattern of protein spots helps to identify unknown proteins and to localize known proteins during experimental proteomics approaches. Differences between the experimentally observed and the calculated migration behaviour of certain proteins provide first indications for potential protein modification events. When possible, the protein spots are directly linked via a mouse click to the public databases SWISS-PROT and PRODORIC. Additionally, we provide tools for the serial calculation and visualization of specific protein properties like pH dependent charge curves and hydrophobicity profiles. These values are helpful for the rational establishment of protein purification procedures. The proteomics tools are available on the World Wide Web at http://prodoric.tu-bs.de/proteomics.php.

Computer Graphics↗
PubMed2004

ProteMiner-SSM: a web server for efficient analysis of similar protein tertiary substructures.

Analysis of protein-ligand interactions is a fundamental issue in drug design. As the detailed and accurate analysis of protein-ligand interactions involves calculation of binding free energy based on thermodynamics and even quantum mechanics, which is highly expensive in terms of computing time, conformational and structural analysis of proteins and ligands has been widely employed as a screening process in computer-aided drug design. In this paper, a web server called ProteMiner-SSM designed for efficient analysis of similar protein tertiary substructures is presented. In one experiment reported in this paper, the web server has been exploited to obtain some clues about a biochemical hypothesis. The main distinction in the software design of the web server is the filtering process incorporated to expedite the analysis. The filtering process extracts the residues located in the caves of the protein tertiary structure for analysis and operates with O(nlogn) time complexity, where n is the number of residues in the protein. In comparison, the alpha-hull algorithm, which is a widely used algorithm in computer graphics for identifying those instances that are on the contour of a three-dimensional object, features O(n2) time complexity. Experimental results show that the filtering process presented in this paper is able to speed up the analysis by a factor ranging from 3.15 to 9.37 times. The ProteMiner-SSM web server can be found at http://proteminer.csie.ntu.edu.tw/. There is a mirror site at http://p4.sbl.bc.sinica.edu.tw/proteminer/.

Binding Sites↗
PubMed1991

Effects of amino acid substitution on three-dimensional structure: an X-ray analysis of cytochrome c3 from Desulfovibrio vulgaris Hildenborough at 2 A resolution.

The three-dimensional structure of cytochrome c3 from Desulfovibrio vulgaris Hildenborough has been determined by use of the molecular replacement method and refined at 2.0 A resolution. A suitable crystal of the cytochrome c3 was obtained from buffer solution (25 mM Tris-HCl, pH 7.4), with 75% ethanol as the precipitating reagent. Crystallographic data are as follows: a = 43.17 A, b = 62.91 A, c = 41.17 A, orthorhombic, P2(1)2(1)2(1) and Z = 4. Constrained least-squares refinement and a molecular dynamics procedure with a simulated structure annealing method yielded a crystallographic R-factor of 0.212. The similarity in the folding pattern of both cytochromes c3 is established, the mean deviation of the polypeptide backbone between the two structures being 0.367 A. Most of the amino acids substitutions from DvMF were located on the surface of the molecule, and in particular, S27 and V86 were placed near the propionic acid of the heme group so as to hang over the heme and the cleft of the molecule.

Amino Acid Sequence↗
PubMed1992

Three-dimensional structure of ferricytochrome c' from Rhodospirillum rubrum at 2.8 A resolution.

The structure of ferricytochrome c' extracted from Rhodospirillum rubrum has been determined by the X-ray crystallographic method. Crystals in hexagonal space group P6(1), with unit-cell dimensions a = b = 51.72 A and c = 155.49 A, contain one dimer molecule composed of chemically identical polypeptide chains (monomer I and monomer II) per asymmetric unit. An electron density map has been calculated at a resolution of 2.8 A by the multiple isomorphous replacement method using four-circle diffractometer data from native crystals and two heavy-atom derivatives. The quality of the map was improved by averaging the electron density about the non-crystallographic 2-fold axis relating the two monomers. The initial three-dimensional model of monomer I was built on a computer graphics system and that of monomer II was derived from monomer I using the non-crystallographic symmetry matrices. The dimer structure has been refined using a combination of simulated annealing and conventional restrained least-squares crystallographic refinement. The current model includes 244 amino acid residues (122 x 2) and 2 hemes, with a root-mean-square deviation in bond lengths from ideal values of 0.022 A. The current crystallographic R-factor is 23.3% for 4,481 independent reflections [magnitude of Fo greater than or equal to sigma (F)] between 5.0 and 2.8 A resolution. The monomer molecule is structurally organized as an array of four nearly parallel alpha-helices which construct a left-twisted bundle. One end of the bundle, in which a covalently bound protoheme IX prosthetic group is incorporated, is more divergent than the other.(ABSTRACT TRUNCATED AT 250 WORDS)

Amino Acid Sequence↗
PubMedDate not supplied

A synthetic IgG-binding domain based on staphylococcal protein A.

A synthetic IgG-binding domain based on staphylococcal protein A was designed with the aid of sequence comparisons and computer graphic analysis. A strategy, utilizing non-palindromic restriction sites, was used to overcome the difficulties of introducing site-specific changes into the repetitive gene. A single mutagenized gene fragment was polymerized to different multiplicities, and the different gene products were expressed in Escherichia coli. Using this scheme, protein A-like proteins composed of different numbers of IgG-binding domains were produced. These domains were changed to lack asparagine--glycine dipeptide sequences as well as methionine residues and are thus, in contrast to native protein A, resistant to treatment with hydroxylamine and cyanogen bromide.

Amino Acid Sequence↗
PubMed2000

On the spatial disposition of the fifth transmembrane helix and the structural integrity of the transmembrane binding site in the opioid and ORL1 G protein-coupled receptor family.

Evidence from statistical cluster analyses of a multiple sequence alignment of G protein-coupled receptor seven-helix folds supports the existence of structurally conserved transmembrane (TM) ligand binding sites in the opioid/opioid receptor-like (ORL1) and amine receptor families. Based on the expectation that functionally conserved regions in homologous proteins will display locally higher levels of sequence identity compared with global sequence similarities that pertain to the overall fold, this approach may have wider applications in functional genomics to annotate sequence data. Binding sites in models of the kappa-opioid receptor seven-helix bundle built from the rhodopsin templates of Baldwin et al. (1997) [J. Mol. Biol., 272, 144-164] and Herzyk and Hubbard (1998) [J. Mol. Biol., 281, 742-751] are compared. The Herzyk and Hubbard template is found to be in better accord with experimental studies of amine, opioid and rhodopsin receptors owing to the reduced physical separation of the extracellular parts of TM helices V and VI and differences in the rotational orientation of the N-terminal of helix V that reveal side chain accessibilities in the Baldwin et al. structure to be out of phase with relative alkylation rates of engineered cysteine residues in the TM binding site of the alpha(2A)-adrenergic receptor. TM helix V in the Baldwin et al. template has been remodelled with a different proline kink to satisfy experimental constraints. A recent proposal that rotation of helix V is associated with receptor activation is critically discussed.

Binding Sites↗
PubMed1988

Model building of disulfide bonds in proteins with known three-dimensional structure.

As an aid in the selection of sites in a protein where a disulfide bond might be engineered, a computer program has been developed. The algorithm starts with the generation of C beta positions from the N, C alpha and C atom coordinates available from a three-dimensional model. A first set of residue pairs that might form a disulfide bond is selected on the basis of C beta-C beta distances between residues. Then, for each residue in this set, S gamma positions are generated, which satisfy the requirement that, with ideal values for the C alpha-C beta and C beta-S gamma bond lengths and for the bond angle at C beta, the distance between S gamma of residue 1 and C beta of residue 2 in a pair (determined by the bond angle at S gamma 2) is at, or very close to its ideal value. Usually two acceptable S gamma positions are found for each half cystine, resulting in up to four different conformations for the disulfide bond. Finally, these conformations are subjected to an energy minimization procedure to remove large deviations from ideal geometry and their final energies are calculated. User input determines which final conformations are energetically acceptable. These conformations are written to a file to allow further analysis and e.g. inspection on a computer graphics device.

Algorithms↗
PubMed1989

Amino acid sequence templates derived from recurrent turn motifs in proteins: critical evaluation of their predictive power.

Amino acid sequence patterns suggested to characterize specific recurrent turn conformation in protein are tested as to their predictive power in a database containing 75 proteins of known structure. Many of these patterns are found to be associated with local structures that differ from the motifs originally used to derive them. It is therefore concluded that, while they could be useful for improving predictions made by other methods, their stand-alone predictive power is poor. The issue of deriving and validating consensus sequence patterns for use in protein structure prediction is raised.

Amino Acid Sequence↗
PubMed1992

Structure of a 16 kDa integral membrane protein that has identity to the putative proton channel of the vacuolar H(+)-ATPase.

A 16 kDa protein has been isolated in a homogeneous form as the major component of a paracrystalline paired membrane structure closely resembling the gap junction. The primary structure of this protein from arthropod and vertebrate species has been determined by protein and cDNA sequencing. The amino acid sequences are highly conserved and virtually identical to the amino acid sequence of the proteolipid subunit of the vacuolar H(+)-ATPases. The disposition of the protein in the membrane has been studied using proteases and the N,N'-dicyclohexylcarbodiimide reactive site identified. These data, together with secondary structure predictions, suggest that the 16 kDa protein is for the most part buried in the membrane, arranged in a bundle of four hydrophobic alpha-helices. Using computer graphics, a model has been constructed based on this arrangement and on the electron microscopic images of the paracrystalline arrays.

Amino Acid Sequence↗
PubMed1993

Protein modelling using a chimera reference protein derived from exons.

Bovine pancreatic beta-trypsin (PDB ID-code: 1TPO) which is registered in the Brookhaven Protein Data Bank (PDB) consists of four exons. The results of homology searches for each exon in the PDB showed that homologous proteins were tonin (PDB ID-code: 1TON), rat mast cell protease (PDB ID-code: 3RP2__A), kallikrein A (PDB ID-code: 2PKA__B) and kallikrein A (2PKA__B) respectively. Thus, for the three-dimensional structure prediction of 1TPO, a chimera protein was constructed from the three proteins mentioned above and the 3-D structure prediction was performed using this chimera reference protein. The modelled structure of 1TPO was energetically optimized by molecular mechanics and molecular dynamics simulation and was compared with its X-ray crystal structure registered in the PDB. The root mean square deviations (r.m.s.d.) of main chain atoms and the neighbouring active site (5 A sphere from His57, Asp102 and Ser195) between the modelled structure and the X-ray structure were 1.66 and 0.94 A respectively. Porcine pancreatic elastase (PDB ID-code: 3EST) which is registered in the PDB was used as the reference protein and the modelled structure from 3EST was also compared with the X-ray data. The r.m.s.d. of main chain atoms and that of the active site were 2.14 and 1.18 A respectively. These results clearly support the propriety of this method using the chimera reference protein.

Algorithms↗
PubMed1995

A model for vicilin solubility at mild acidic pH, based on homology modelling and electrostatics calculations.

The crystallographic structures of jack bean canavalin and French bean phaseolin have been used to construct a homology model of the storage vicilin of cocoa. Reported molecular weights for cocoa storage protein subunits correlate with proteolysis at the site of a large hydrophilic insert in the mature protein. Burial of the hydrophobic amino acids on trimer formation is a strongly conserved feature in the vicilin family. Histidine residues also sit at the monomer-monomer interfaces of the trimer and are likely to contribute to the decreased solubility of cocoa vicilin at mild acidic pH, which is generally considered to be caused solely by aggregation near to the isoelectric point. Electrostatic calculations suggest that such an arrangement of histidine residues in the absence of specific counterion binding will not favour the particular geometry of trimer formation below neutral pH. Higher order aggregates that do not exclude histidine charge from the solvent may be favoured, aiding the precipitation of cocoa vicilin at mild acidic pH. This suggestion is considered for the vicilin family. The hypothesis could contribute to an understanding of the pH and ionic strength dependence of vicilin solubility in vitro, and possibly of the behaviour of vicilins in the seed storage environment.

Amino Acid Sequence↗
PubMed1995

Comparative modeling of the three CP modules of the beta-chain of C4BP and evaluation of potential sites of interaction with protein S.

A computer model of the beta-chain of C4b-binding protein (C4BP) was constructed, using the backbone fold of the NMR structures of the sixteenth CP module of factor H (H16) and of a pair of modules consisting of the fifteenth and sixteenth CPs of factor H (H15-16). The characteristic hydrophobic core responsible for dictating the three-dimensional structure of the CP family is conserved in the amino acid sequence of C4BP beta 1, beta 2 and beta 3. The distribution of the electrostatic potential shows that the model is mainly covered by a negative contour. Interestingly, a positive area is observed in the C-terminal region of the first CP module, enclosing peptide 31-45, known to be a binding site for protein S. This observation suggests that electrostatic interactions can be of importance for the interaction of C4BP to protein S. A solvent-accessible hydrophobic patch, located nearby and involving the peptide 31-45, was also found in the model, further confirming that this area is involved in the interaction with protein S. The contribution of beta-chain residues 31-45 to the affinity for protein S was studied further by means of synthetic mutant peptides. The results suggest that both electrostatic and hydrophobic interactions are important for the binding to protein S.

Amino Acid Sequence↗
PubMed1996

Protein fold recognition by sequence threading: tools and assessment techniques.

Protein fold recognition has been approached by threading an amino acid sequence onto a library of folds, calculating a sequence-structure compatibility score, and ranking these scores. Due to imperfections in the empirically derived pairwise potential functions and the necessarily heuristic approach to the sequence-structure alignment problem, the method benefits from the assessment of threaded models to evaluate the most probable structures among the list of possible folds. THREADER and ANALYST, software tools available through the Internet, facilitate the alignment and assessment steps of a threading prediction. No process has been found to be universally reliable for the detection of folds related to the structure of a known input sequence, but several useful steps and approaches are discussed.

Algorithms↗
PubMed1994

Digitized slice interposition in forensic dental radiographic identification. An in vitro study.

Traditional methods of comparison involving the presence of missing teeth, dental restorations, and other pathological features may be difficult due to the reduction in dental restorations in today's population. This study demonstrates an alternative method of identification using digitized images. It utilizes anatomical structures such as dental root morphology and spatial relations of teeth roots and their supporting structures on simulated antemortem and postmortem radiographs as the basis for identification. A total of 39 mandibular specimens were used and two radiographs representing the antemortem and postmortem radiographs of each hemimandible were exposed by two operators using different x-ray generators. The radiographs were scanned and digitized. The identities of the antemortem and postmortem radiographs were kept from the operator. Following this, horizontal sections were digitally cut from the antemortem radiographs through the roots approximately halfway between the neck of the tooth and the root apex. This section was manipulated onto the postmortem radiograph by using a computer graphics program and a quantitative comparison of the alignment of normal dental anatomical landmarks was undertaken. The technique enabled perfect matching of all 39 specimens by antemortem and postmortem dental radiographs. The mean number of identifying points was 17.5 and the mean number of nonmatching points was 0.1. The mean concordance was 99.2% between the antemortem and postmortem radiographs.

Forensic Dentistry↗

Refine your search to explore more results.