Search PubMed⌕ Search

SEARCH · Search PubMed

Results for “Wettability”

Search indexed PubMed citations on genomics, clinical trials, systematic reviews and public health. Explore titles, authors and supplied subject terms, then open the PubMed record.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 181 records · Page 10Linked to original sources
PubMed2006

Adsorption of hexyl-alpha,omega-bis(dodecyldimethylammonium bromide) gemini surfactant on silica and its effect on wettability.

The adsorption of hexyl-alpha,omega-bis(dodecyldimethylammonium bromide) (C(12)C(6)C(12)Br(2)) gemini surfactant on silica and its effect on wettability have been studied. The structure of the adsorbed aggregates experiences an evolving course with the increase of C(12)C(6)C(12)Br(2) concentration. It is from no aggregates to circular islands, then to semicontinuous islands, and at last to the two-bilayer structure. No matter what kind of aggregates are in existence, their thickness values are to be the same 3.3+/-0.3 nm. The fraction of silica surface covered by the surfactant aggregates also varies from nearly zero at 0.05 mM to approximately 0.92 at 5.0 mM. The variation of contact angle against C(12)C(6)C(12)Br(2) concentration shows two distinct regions. The upward shift indicates that the surfactant molecules are adsorbed with their hydrophobic tails facing air upon increasing concentration, while the downward shift reveals that the surfactant aggregates are in existence with the hydrophilic headgroups facing air. IR spectra suggest that two different courses are involved with the increase of the surfactant concentration. One possible course is that the surfactant tails pack more closely and orderly, and the other may be that the spacer changes from stretched profile to bended conformation upon increasing the surfactant concentration.

Journal Article↗
PubMed2002

Hydrophobic mechanochemical treatment of metallic surfaces wettability measurements as a means of assessing homogeneity.

Hydrophobicity, lubrication and anticorrosion properties of steel substrates have been obtained by a deposition of thin film (i.e. by mechanochemical treatment) at room conditions. Stearic acid and paraffin were chosen as reactive molecules. Different abrasive powders were selected to generate active sites on the treated surfaces for adsorption of the reactive molecules and then, the results were compared. The surfaces were analyzed by reflection-absorption infrared spectroscopy (RAIRS). The results emphasize that, a thick layer of mixed stearic acid/paraffin was deposited onto the metallic surface after the treatment. After hexane rinsing we could only detect a very thin layer of oriented stearic acid molecules chemically adsorbed onto the metallic surface and which engages strong interactions with it. Whereas, RAIRS only provides molecular analysis, the XPS technique was complementary for discriminating the different surfaces. It was possible to show differences in thickness as well as in coverage according to the size and shape of abrasive particles. Furthermore, we could conclude that deposit layer is not uniform. Defects were always present and were dependent on abrasive powders used. Then wettability was assessed as a way to test the homogeneity of thin films generated by the mechanochemical treatment. In agreement with theoretical data, receding contact angle was very dependent on the defects in the deposited film. If holes or aggregates were increased in the deposit layer, the receding contact angle was decreased while advancing contact angles and equilibrium contact angles remained constant. A very important point for technological applications was that the homogeneity of the deposited film was governed by abrasive powder involved in mechanochemical treatment and contact angle values were a direct measurement of the homogeneity of surfaces generated by mechanochemical treatment.

Journal Article↗
PubMed1989

Determination of diisobutyl- and diisopropylnaphthalenesulphonates in pesticide wettable powders and dispersible granules by high-performance liquid chromatography.

Methods are presented for determining diisobutyl and diisopropylnaphthalenesulphonates in pesticides formulated as wettable powders or water dispersible granules. The dispersing agents were concentrated on anion-exchange cartridges and after removal of interfering substances eluted with methanol containing 5% hydrochloric acid. The various isomers were separated by reversed-phase high-performance liquid chromatography on an octyl-modified column using a water-methanol gradient or on a cyanoalkyl-modified column with water-methanol. Quantitative results were obtained by comparing the peaks with those of the standard technical material. Various groups of peaks were identified as mono-, di- and triisobutylnaphthalenesulphonates respectively.

Chromatography, High Pressure Liquid↗
PubMed1991

Wettability of elastomeric impression materials and voids in gypsum casts.

Numerous factors are involved in making an accurate void-free dental artificial stone cast or die. The relationship of the wettability of an elastomeric impression material and its interaction with the gypsum slurry is an important factor. This study examined the relative "pourability" of several impression materials by counting the number of resultant voids in artificial stone casts containing 48 point angles. Those elastomers that exhibited the lowest contact angle with water produced artificial stone casts with the fewest voids. Surfactants applied to the impression material significantly reduced the number of voids in artificial stone casts, as did modified elastomers designated by the manufacturer as hydrophilic.

Calcium Sulfate↗
PubMed2002

Wettability and surface charge of Si3N4-bioglass composites in contact with simulated physiological liquids.

Wettability and surface charge studies were performed on a novel Si3N4-30wt% bioglass biocomposite. Contact angle and surface tension variation with time were determined at 25 degrees C, respectively, by the sessile and pendant drop techniques, for distinct testing liquids: water, diiodomethane, simulated body fluid (SBF) and bovine serum albumin (BSA) dissolved in SBF solution. This biocomposite revealed a hydrophilic character (theta = 26.6 +/- 2.0 degrees) and a surface tension value (66.6 mJ m(-2)) comparatively higher than those of the most common bioceramics. An important characteristic is the high work of adhesion towards SBF + BSA (96.4 +/- 0.2mJ m(-2)) that was measured. The Si3N4-bioglass material is negatively surface charged above the pH(IEP) = 2.5 in aqueous SBF + BSA solution, as a result of the presence at the surface of unsaturated Si-O bonds and Si-OH groups. The very high negative zeta potential at pH approximately 7 (-58.6 +/- 5.5mV) influenced albumin adsorption and mechanisms are discussed in terms of entropy and enthalpy gains from conformational unfolding and cations coadsorption.

Glass↗
PubMed2000

Synthesis and wettability characteristics of model adhesive protein sequences inspired by a marine mussel.

Three adhesive polyoctapeptides (X/Y-Gly-Tyr-Ser-Ala-Gly-Tyr-Lys)n (X, Thr and Ala: Y, Thr:Ala = 3:2), which are the C-terminal octapeptide sequences shared by all those consensus motifs of a ribbed mussel Geukensia demissa adhesive protein (RMAP), have been synthesized by the polycondensation of the active esters. The correlation between wettability and adhesion with the alternative substitution by hydrophobic Ala and hydrophilic Thr in the synthetic RMAPs in aqueous solution and as films on high and low surface free energy (sfe) surfaces has been investigated by surface chemical approaches. The side chain moieties of RMAPs arrange their local conformation to adapt to the inherent surface character, and they orientate on high and low sfe surfaces. On a high sfe glass the hydrophilic side chains of the RMAP molecules face toward the surface, and on a low sfe polyethylene (HDPE) the hydrophobic side chains face toward the surface. The bonding strengths of synthetic RMAPs on glass and HDPE with and without enzymatic oxidation have been examined. Increased starting concentration exhibited the strongest adhesive capability (7.5 kgf/cm2) on alumina due to the increased cohesion among RMAP molecules. As another factor to increase adhesive ability, the intermolecular cross-linking among RMAP molecules by tyrosinase increases their adhesive capability by about 20% on HDPE, glass, and alumina except iron.

Adhesives↗
PubMed2003

Control over the wettability of an aligned carbon nanotube film.

Three-dimensional anisotropic aligned carbon nanotube microstructures were constructed by the chemical vapor deposition method on silicon templates with well-defined structure. It brought about new properties of wettability. Superhydrophobic (contact angle > 150 degrees ) and very hydrophilic (contact angle < 30 degrees ) properties can both be achieved by a simple change of structural parameter.

Journal Article↗
PubMed2005

Creating responsive surfaces with tailored wettability switching kinetics and reconstruction reversibility.

We report on the formation of responsive surfaces with tailorable surface reconstruction kinetics and switching hysteresis by thiolene radical addition of mercaptoalkanols with variable lengths to poly(vinylmethylsiloxane) networks. Exposing these elastomer surfaces to water results in rearrangement of the hydrophilic alkanes at the surface. The rearrangement kinetics decreases with increasing number of the methylene spacers (n) in the mercaptoalkanol. The response kinetics is found to be very fast for n = 2 and 6. For instance, upon exposing to water, the water contact angle on 3-mercaptopropanol-based surfaces decreases by approximately 35 degrees at the rate of 2 degrees /s. The high flexibility of the siloxane backbone endows these materials with switching longevity; the materials were able to switch their wettability over 10 cycles with minimum hysteresis. Increasing the number of methylene spacers to n = 11 decreases the surface reorganization dramatically. Formation of semicrystalline regions in such materials (detected via IR) is responsible for initial "sluggish" kinetics and eventual surface "freezing".

Journal Article↗
PubMed2006

Time-dependent organization and wettability of decanethiol self-assembled monolayer on Au(111) investigated with STM.

A detailed study on the time-dependent organization of a decanethiol self-assembled monolayer (SAM) at a designed solution concentration onto a Au(111) surface has been performed with scanning tunneling microscopy (STM). The SAMs were prepared by immersing Au(111) into an ethanol solution containing 1 microM decanethiol with different immersion times. STM images revealed the formation process and adlayer structure of the SAMs. It was found that the molecules self-organized into adlayers from random separation to a well-defined structure. From 10 s, small domains with ordered molecular organization appeared, although random molecules could be observed on Au(111) at the very initial stage. At 30 s, the SAM consisted of uniform short stripes. Each stripe consisted of sets of decanethiol mainly containing eight molecules. With the immersion time increasing, the length of the stripes increased. At 5 min, the alkyl chains overlapped each other between the adjacent stripes, indicating the start of a stacked process. After immersing Au(111) in decanethiol solution for 3 days, a densely packed adlayer with a (radical 3 x radical 3)R30 degrees structure was observed. The formation process and structure of decanethiol SAMs are well related to sample preparation conditions. The wettability of the decanethiolate SAM-modified Au(111) surface was also investigated.

Journal Article↗
PubMed2006

Effect of graphitization on the wettability and electrical conductivity of CVD-carbon nanotubes and films.

The use of carbon nanomaterials in various applications requires precise control of their surface and bulk properties. In this paper, we present a strategy for modifying the surface chemistry, wettability, and electrical conductivity of carbon tubes and films through annealing in a vacuum. Experiments were conducted with 60-300 nm nanotubes (nanopipes), produced by noncatalytic chemical vapor deposition (CVD) in a porous alumina template, and with thin films deposited by the same technique on a glassy carbon substrate having the same structure and chemistry of the CNTs. The surface of the as-produced CVD-carbon, treated with sodium hydroxide to remove the alumina template, is hydrophilic, and the bulk electrical conductivity is lower by a factor of 20 than that of fully graphitic multiwalled nanotubes (MWNT) or bulk graphite. The bulk electrical conductivity increases to the conductivity of graphite after annealing at 2000 degrees C in a high vacuum. The analysis of CNTs by transmission electron microscopy (TEM) and Raman spectroscopy shows the ordering of carbon accompanied by an exponential increase of the in-plane crystallite size, L(a), with increasing annealing temperature. Environmental scanning electron microscopy (ESEM) was used to study the interaction of CNT with water, and contact angle measurements performed using the sessile drop method on CVD-carbon films demonstrate that the contact angle increases nearly linearly with increasing annealing temperature.

Journal Article↗
PubMed2005

Morphology of adsorbed polymers and solid surface wettability.

The adsorption of a polyacrylamide (MW 14600) and two polysaccharides (MW 9260 and 706 x 10(3)) onto model silica surfaces of different hydrophobicities was investigated. In all cases, adsorption adhered to the Freundlich isotherm, reflecting the heterogeneous character of the solid substrates. The latter strongly influenced the character of the adsorbed polymer, with morphologies from chainlike structures to thin films and patches being observed. Surface roughness, polymer type, and molecular weight also play roles in controlling adsorbed polymer morphology. Surface wettability is strongly influenced by the thickness of the adsorbed layer.

Journal Article↗
PubMed2005

Size-selective deposition and sorting of lyophilic colloidal particles on surfaces of patterned wettability.

A highly parallelizable means of positioning or sorting particles in a size-selective manner into arrays is demonstrated based on the placement of particle suspensions on surfaces of patterned wettability and the subsequent evaporation of the suspending solvent. The method relies on creating lyophilic features of dimensions similar to or greater than those of the particles to be arrayed and smaller than those of the particles to be excluded. As the contact line recedes, it fills lyophilic features, creating discrete fluid elements that mimic the underlying lyophilic pattern. The fluid elements have aspect ratios dictated by the contact angle. By adjusting the size of the lyophilic features, the heights of the fluid elements can be adjusted to sequester or exclude particles based on their diameter. The principal interest of this work is its broad applicability. No prior understanding of the particle properties is needed except for the size of the particle and its ability to be suspended in a solvent.

Letter↗
PubMed2005

Control over wettability of polyethylene glycol surfaces using capillary lithography.

We demonstrate that wettability of poly(ethylene glycol) (PEG) surfaces can be controlled using nanostructures with various geometrical features. Capillary lithography was used to fabricate PEG nanostructures using a new ultraviolet (UV) curable mold consisting of functionalized polyurethane with acrylate group (MINS101m, Minuta Tech.). Two distinct wetting states were observed depending of the height of nanostructures. At relatively lower heights (< 300 nm for 150 nm pillars with 500 nm spacing), the initial contact angle of water was less than 80 degrees and the water droplet easily invaded into the surface grooves, leading to a reduced contact angle at equilibrium (Wenzel state). At relatively higher heights (> 400 nm for 150 nm pillars with 500 nm spacing), on the other hand, the nanostructured PEG surface showed hydrophobic nature and no significant change in contact angle was observed with time (Cassie state). The presence of two wetting states was also confirmed by dynamic wetting properties and contact-angle hysteresis. The wetting transition from hydrophilic (bare PEG surface) to hydrophobic (PEG nanostructures) was described by the Cassie-Baxter equation assuming that enhanced hydrophobicity is due to the heterogeneous wetting mediated by an air pocket on the surface. The measured contact angles in the Cassie state were increased with increasing air fraction, in agreement with the theoretical prediction.

Journal Article↗
PubMed2006

Nanoscale wettability of self-assembled monolayers investigated by noncontact atomic force microscopy.

We report on a novel technique to nucleate nanometer-sized droplets on a solid substrate and to image them with minimal perturbation by noncontact atomic force microscopy (NC-AFM). The drop size can be accurately controlled, thus permitting hysteresis measurements. We have studied the nanoscale wettability of several methyl-terminated substrates prepared by the self-assembly of organic molecules. These substrates are alkyltrichlorosilanes on silica, alkylthiols on gold, alkyl chains on hydrogen-terminated silicon, and crystalline hexatriacontane chains on silica. For each of these systems, we report a deviation of the wetting contact angle from the macroscopic value, and we discuss this effect in term of mesoscale surface heterogeneity and long-range solid-liquid interactions.

Journal Article↗
PubMed2005

Azobenzene-containing monolayer with photoswitchable wettability.

A compact monolayer containing azobenzene has been prepared on silicon substrates. The elaboration route consisted of covalent grafting of freshly synthesized azobenzene moieties onto an isocyanate-functionalized self-assembled monolayer (SAM). The highly packed and ordered isocyanate-functionalized SAM and the azobenzene-functionalized SAM were monitored and characterized by contact angle measurements and X-ray reflectivity (XR). Photoswitching of the wettability of the film induced by the reversible cis-trans isomerization of the azobenzene chromophores is experimentally shown from water and olive oil contact angle measurements.

Journal Article↗
PubMed2005

Odd-even variations in the wettability of n-alkanethiolate monolayers on gold by water and hexadecane: a molecular dynamics simulation study.

Molecular dynamics (MD) simulations were performed to investigate odd-even chain length dependencies in the wetting properties of self-assembled monolayers (SAMs) of n-alkanethiols [CH3(CH2)n-1SH] on gold by water and hexadecane. Experimentally, the contact angle of hexadecane on the SAMs depends on whether n is odd or even, while contact angles for water show no odd-even dependence. Our MD simulations of this system included a microscopic droplet of either 256 water molecules or 60 hexadecane molecules localized on an n-alkanethiolate SAM on gold with either an even or odd chain length. Contact angles calculated for these nanoscopic droplets were consistent with experimentally observed macroscopic trends in wettability, namely, that hexadecane is sensitive to structural differences between odd- and even-chained SAMs while water is not. Structural properties for the SAMs (including features such as chain tilt, chain twist, and terminal methyl group tilt) were calculated during the MD simulations and used to generate IR spectra of these films that compared favorably with experimental spectra. MD simulations of SAMs in contact with slabs of water and hexadecane revealed that the effects of these solvents on the structure of the SAM was restricted to the chain terminus and had no effect on the inner structure of the SAM. The density profiles for water and hexadecane on the SAMs were different in that water displayed a significant depletion in its density at the liquid/SAM interface from its bulk value, while no such depletion occurred for hexadecane. This difference in contact may explain the lack of an odd-even variation in the wetting characteristics of water on these surfaces, because the water molecules are positioned further away from the surface and, therefore, are not sensitive to the structural differences in the average orientations for the terminal methyl groups in odd- and even-chained SAMs. In contrast, the differences in the wetting properties of hexadecane on the odd- and even-chained SAMs may reflect the closer proximity of these molecules to the SAM surface and a resulting greater sensitivity to the differences in the terminal methyl group orientations in the SAMs. SAM-solvent interaction energies were calculated during the MD simulations, yielding interaction energies that differed on the even- and odd-chained surfaces by approximately 10% for hexadecane and negligibly for water, in accord with estimates using experimental wetting results.

Alkanes↗
PubMed2006

The influence of polymer structure and morphology on talc wettability.

Advancing water contact angles were measured on freshly cleaved talc faces as well as on talc particles. The intrinsic hydrophobicity of talc was shown to be due to the dominance of the apolar components of the work of adhesion. Polyacrylamides and polysaccharides adsorb onto the surface of talc, displaying strikingly different morphologies. Adsorbed amount, apparent layer thickness, and polymer structure control talc wettability.

Journal Article↗
PubMed2006

Wettability changes induced by biochemical surface reactions.

We report the use of proteins, lipids, and enzymes for the preparation of surfaces with reversible wettability changes, in particular, surfaces capable of switching from hydrophobic to hydrophilic and back. We demonstrate that these reactions can be used for engineering capillary systems with gating properties.

Adsorption↗