SEARCH · Search PubMed

Search Search PubMed

Search indexed PubMed citations on genomics, clinical trials, systematic reviews and public health. Explore titles, authors and supplied subject terms, then open the PubMed record.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

8 recordsLinked to original sources

PubMed2026

Urban stormwater infrastructure as a microplastic superhighway: a critical review of transport dynamics, modelling, and mitigation across pavements and drainage networks.

This review examines the transport, fate, modelling, and mitigation of Microplastics (MPs) in urban stormwater infrastructure, with emphasis on pavements, runoff pathways, micro-drainage, and macro-drainage systems. Following a systematic review approach, more than 1000 records were screened and approximately 50 core studies were retained when they addressed urban stormwater or drainage-related MP transport with adequate methodological reporting; marine-only studies and biological-effect studies without direct relevance to transport processes were excluded. The evidence shows that stormwater systems function not merely as passive conduits but as dynamic reactive transport systems with temporary storage, where particle mobilisation, sedimentation, resuspension, and temporary retention regulate MP export. Road surfaces, especially high-traffic areas, are major reservoirs of tyre wear, road-marking, atmospheric, and litter-derived particles that are rapidly mobilised during rainfall. Conventional grab sampling may underestimate MP loads, which in some cases exceed treated wastewater effluent loads by up to six-fold. Drainage structures such as manholes can immobilise up to 17.3% of near-neutrally buoyant particles, while biofouling and aggregation may shift buoyant polymers from wash-load to bedload. Mitigation systems, including permeable pavements, bioretention, wetlands, and technical inserts, can achieve high removal of coarse MPs, but performance declines for fine particles below 100 µm. The review highlights the need for standardised flow-proportional sampling, physically informed modelling, and treatment-train strategies targeting both surface sources and in-network storage.

Microplastics↗

PubMed2026

Are there any common effects in preclinical models of micro- and nanoplastic (MNP) exposure? A systematic review.

Micro- and nanoplastics (MNPs) are emerging contaminants detected in food sources and the marine food chain, raising concerns about human health. Although no causal relationship has been established between MNP exposure and specific diseases, growing evidence suggests adverse developmental, behavioral, cognitive and biochemical effects. This systematic review synthesized evidence from common preclinical neurotoxicology models, including C. elegans, D. rerio, D. melanogaster, in vitro systems and rodents, to identify convergent developmental, behavioral and biochemical outcomes. The protocol was preregistered in OSF, followed PRISMA-P guidelines, applied PICOS criteria, and assessed methodological quality using the European Commission's ToxRTool. Overall, 185 studies were included. Consistent findings showed impaired survival and disrupted development across all models. Behavioral alterations affecting anxiety, memory, learning, sociability and locomotor activity were also consistently reported. In addition, numerous studies identified disruptions in the serotonergic (5-HT) system, including changes in neurotransmitter levels, transporters and metabolic enzymes. Despite methodological heterogeneity, these findings indicate that MNP exposure produces reproducible neurodevelopmental and neurochemical alterations across experimental models. Future studies should improve methodological harmonization, strengthen cross-model comparability and identify robust biomarkers and key mechanisms underlying MNP-induced neurotoxicity, facilitating translation to human health risk assessment frameworks.

Animals↗

PubMed2026

Microplastic contamination in South Asian commercially important seafood: A comprehensive assessment of occurrence, source, and human health risk.

Seafood is a cornerstone of global food security and human nutrition, serving as the primary source of animal protein for more than one-fourth of the global population, with South Asia representing one of the world's fastest-growing seafood-consuming regions. However, escalating microplastic (MP) pollution in marine ecosystems poses an emerging threat to seafood safety and human health, yet a comprehensive regional assessment of MP contamination in South Asian seafood remains lacking. This study presents the first region-wide systematic synthesis of the literature on MP contamination in commercially important seafood across South Asia, integrating occurrence patterns, human exposure assessment, polymer-specific hazard evaluation, and bibliometric analysis to address this critical knowledge gap. The meta-analysis estimated an average microplastic exposure of 145 particles/person/day through seafood consumption in South Asia, with fish contributing the highest intake (121 particles/person/day). The detected polymers were classified into PHI hazard levels I-IV, with polyvinyl chloride (PVC), polyurethane (PU), and polyacrylamide (PAM) representing the highest hazard categories. The mean pollution load index (PLI) was 7.71 (Category I), with crustaceans exhibiting the highest contamination (PLI = 10.07). Polypropylene was the predominant polymer, whereas fragments and blue particles were the most frequently reported microplastic characteristics. These findings provide the first regional baseline for assessing microplastic contamination, polymer-associated hazards, and human exposure through seafood consumption in South Asia, underscoring the need for standardized monitoring and targeted mitigation strategies to safeguard seafood safety and public health.

Animals↗

PubMed2026

Thermal analysis techniques for microplastic mass quantification: Methodological challenges and standardization needs.

Microplastics (MPs, 1 μm-5 mm) and nanoplastics (NPs, <1 μm) are ubiquitous contaminants requiring standardized quantification methods. This systematic review evaluates thermal analysis techniques for mass-based MP detection, including pyrolysis-gas chromatography-mass spectrometry (Py-GC-MS), thermogravimetry-MS (TGA-MS), thermal extraction desorption-GC-MS (TED-GC-MS), and differential scanning calorimetry (DSC). Database searches (Web of Science, from inception to December 1, 2025) following PRISMA guidelines identified studies across seven environmental matrices (water, soil/sediment, atmosphere, biota, human tissues). We identify critical standardization gaps: inconsistent marker ion selection, unvalidated conversion factors for tire and road wear particles (TRWPs), and the absence of certified reference materials for complex matrices. Py-GC-MS demonstrates versatility but suffers from lipid interference in biological samples; TED-GC-MS offers superior sensitivity (sample capacity ∼200× Py-GC-MS) but lacks real-time chromatographic monitoring. To advance data comparability, we propose: (i) harmonized ion selection hierarchies based on specificity-sensitivity balance, (ii) matrix-specific TRWP quantification protocols, and (iii) inter-laboratory validation using environmental reference materials. This review provides a methodological roadmap for standardizing thermal analysis in MP research.

Humans↗

PubMed2026

Towards microplastic bioremediation: Fungal degradation of pristine and pretreated high-density polyethylene and polystyrene.

Microplastic (MP) contamination has become a significant ecological issue because of its enduring existence in the ecosystem and its possible negative impacts. Therefore, using degrading strategies to eliminate these stubborn polymers has been a subject of scientific research. However, the currently used degradation methods are relatively inefficient. Given the pervasiveness of High-Density Polyethylene (HDPE) and Polystyrene (PS) and their resistance to biodegradability, disposal strategies are critical and must be addressed. This manuscript examines the biodegradation of pristine and UV-treated HDPE and PS MPs by Aspergillus flavus species in minimal growth media over 70 days. The maximum weight loss observed at 70 days for pristine HDPE and PS in sole carbon source (SCS) media was (29.33 ± 0.28) % and (17.67 ± 0.35) %, respectively. Whereas, for UV-treated HDPE and PS MPs, the % weight reduction was (33 ± 0.21) % and (25 ± 0.19) %, respectively. UV-treated MPs exhibited greater weight reduction, as UV induced oxygenated functional groups enhance polymer susceptibility to enzymes, thereby promoting biodegradation. HDPE MPs typically show a higher proportion of particles in the lower size range compared to PS MPs. This assertion was based on the weight loss, particle size distribution, and SEM analysis. Furthermore, chemical changes were evaluated using Fourier transform Infrared Spectroscopy (FTIR) analysis, which also displayed chemical oxidation occurring during biodegradation. Liquid Chromatography-Mass Spectrometry (LC-MS) results indicate that UV pretreatment enhances biodegradability by promoting chain scission. These findings further suggest that this fungus's natural and ubiquitous occurrence in terrestrial and marine environments may actively contribute to MP biodegradation while requiring few nutrients.

Microplastics↗

PubMed2026

Influence of microplastics on microalgal performance during wastewater polishing.

Microplastics (MPs) are emerging contaminants that are increasingly accumulating in aquatic ecosystems due to excessive anthropogenic activity and insufficient mitigation strategies, posing serious environmental and public health risks. Their impact on wastewater (WW) treatment processes remains poorly understood. This study evaluated the effects of five MPs commonly found in WW - polypropylene, polystyrene, polyamide, low-density polyethylene, and high-density polyethylene - on the physiology and bioremediation performance of the microalga Chlorella vulgaris in synthetic WW (SWW). Metabolic responses were assessed via esterase activity and intracellular reactive oxygen species (ROS), while nitrogen (N), phosphorus (P), and glucose removal were monitored to evaluate bioremediation efficiency. MPs inhibited esterase activity and elevated ROS levels, indicating oxidative stress. Nevertheless, C. vulgaris maintained a high bioremediation capacity (> 75 % N, > 60 % P, and > 70 % for glucose). Environmental conditions modulated microalga response to MPs exposure. Under N-limited conditions, C. vulgaris exhibited enhanced nutrient uptake and biomass production, but a 12 h/12 h light/dark photoperiod reduced N removal but stimulated glucose consumption via heterotrophic metabolism. In contrast, C-limited conditions exacerbated oxidative stress and compromised nutrient removal, resulting in residual concentrations exceeding legal limits. These findings highlight that environmental factors can either mitigate or exacerbate the physiological stress induced by MPs, ultimately affecting WW polishing. This work provides a comprehensive insight into the cellular and metabolic effects of MPs on microalgae and supports C. vulgaris as a resilient and sustainable approach for nutrient and carbon removal in MP-contaminated WW systems.

Microalgae↗

PubMed2025

Tracking microplastic contamination across seasons in a freshwater reservoir: Evidence from surface water, sediments, and fishes.

Microplastics (MPs) are prevalent contaminants in aquatic environments, posing substantial ecological and health risks. These particles migrate within the different layers of aquatic bodies with time and affect the respective biota. Thus, to get an in-depth understanding of the particles, this current study investigated the seasonal distribution, morphological and chemical characteristics, along with potential ecological and human health impacts in the samples including surface water, sediment, and fish from a drinking water supplying reservoir in eastern India. Across three different seasons, pre-monsoon, monsoon, and post-monsoon samples were collected using optimized methods. Results revealed distinct seasonal trends: MP abundance in surface water peaked during the monsoon (mean: 1.15 MPs/L), while sediment showed the highest concentrations in the pre-monsoon (mean: 596 MPs/kg), indicating temporal accumulation dynamics influenced by runoff, hydrodynamics, and sedimentation. Fish gut analysis confirmed ingestion of MPs across five species, with concentrations ranging from 26 to 100 MPs/kg, depending on feeding habits. The most dominant MP type were fragments, followed by fibers, films, and beads. Polymer analysis via µFTIR identified polyethylene, polypropylene, and polyvinyl chloride as prevalent, with hazard assessments (i.e., Polymer Hazard Index (PHI)) indicating medium to very high ecological risks. Heavy metal association was more dominant in the MPs isolated from sediments than the waterborne MPs. Pollution Load Index (PLI) values were > 1 in most seasons, confirming contamination. Health risk analysis suggested potential exposure through both drinking water and fish consumption. This study emphasizes the need for seasonal monitoring, improved waste management, and mitigation strategies to address MP pollution in freshwater ecosystems.

Microplastics↗

PubMed2025

Influence of soil types with different soil-forming process on the qualitative and quantitative detection of microplastics by near-infrared spectroscopy.

Microplastics (MPs) have become a pressing global environmental threat, with soils-acting as sinks for MPs from multiple sources-gaining increasing attention. Near-infrared (NIR) spectroscopy offers a promising tool for MPs detection due to its rapid, non-destructive, and field-applicable features. Although previous studies have focused on the effects of individual soil components on the NIR detection performance of MPs, there is still a lack of systematic research on how the complex background-formed by the coupling of multiple physicochemical properties in natural soils-affects detection performance. This study focuses on soil types with different soil-forming processes, selected five representative agricultural soils to systematically evaluate how the combinations of physicochemical properties they represented affect the performance of NIR-based qualitative and quantitative analysis of MPs in soils. The results demonstrated that soil type significantly affected both the spectral response and detection performance of MPs. Brown Pedocals and Brown Earth exhibited clearer characteristic absorption and stronger linear responses, achieving higher identification accuracy under low (<1.5 %) or zero MPs concentrations and the best quantitative performance (R2 ≥ 0.988, prediction set root mean square error (RMSEP) ≤ 0.110 %). In contrast, Phaeozem and Red Soil were more prone to misclassification at low concentrations, while Fluvo-aquic Soil showed the poorest quantitative performance. This study is the first to reveal, at a holistic level, the critical constraints posed by natural soil complexity on the NIR detection of MPs, offering targeted empirical evidence to support the application of NIR technology in real-world soil environments.

Soil↗