Search PubMed⌕ Search

PubMed · 9865546

Rapid urinary iodide test.

Abstract

Assessment of iodine deficiency and monitoring of iodine supplementation programs demands rapid, simple and cost-effective methods for the determination of urinary iodide concentrations. We propose a rapid test based on the iodide-catalyzed oxidation of 3,3',5,5'-tetramethylbenzidine by peracetic acid/H2O2 to yield colored products. The color of the chemical reaction is compared with color categories of a pictogram corresponding to three ranges (<10, 10-30, and >>30 microg/100 mL) of iodide concentrations. The test is very easy to perform and does not require any instrumentation or apparatus. Sample preparation is simple and consists in the removal of interfering substances by disposable columns, 65 x 10.5 mm, packed with specifically prepared activated charcoal. For comparison with a reference method for measuring urinary iodide (HPLC), we determined the iodide concentrations of 370 random (untimed) urine samples from consecutive patients by both HPLC and the rapid test. The results obtained by both methods are in close agreement with respect to classification of the samples according to the above three ranges, with a maximum difference of <5% for each range. This rapid test is therefore very well suited to epidemiological surveys of iodine deficiency especially in developing countries.

Explore related subjects

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

J Rendl, D Bier, T Groh, C Reiners. 1998. Rapid urinary iodide test.. https://doi.org/10.1055/s-0029-1212038

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related citations

Removal of organic pollutants from 2,2',5,5'-tetrachlorobenzidine (TCB) industrial wastewater by micro-electrochemical oxidation and air-stripping.

A feasible method for treatment of the wastewater from the two-staged neutralization in 2,2',5,5'-tetrachlorobenzidine (TCB) manufacturing processes, a refractory dye intermediate effluents, based on combined micro-electrochemical oxidation or iron-chipping filtration (ICF) and air-stripping reactor (ASR), was developed. On conditions of HRT 1h, pH 3.0 in ICF and HRT 38 h, gas-liquid ratio 15, pH 6.0-8.65, temperature 26 degrees C in ASR, the overall COD, color, TCB and NH(4)(+)-N removal were 96.8%, 91%, 87.61% and 62%, respectively, during the treatment of TCB wastewater from the two-staged neutralization dissolved by methanol. The averaged 18.3%, 81.7% of the total degraded COD, 35.2%, 64.8% of TCB were carried out in ICF and ASR, respectively. NH(4)(+)-N removal was finished mainly in ASR. The experimental results indicated that the combined micro-electrochemical oxidation and air-stripping process performed good treatment of COD, color, TCB and NH(4)(+)-N removal in TCB wastewater from the two-staged neutralization dissolved by ethanol or acetone, came up the discharge standard in China. But the TCB wastewater from the two-staged neutralization dissolved by methanol should be deeply treated before discharged.

Benzidines↗

Electronic, infrared, and 1HNMR spectral studies of the novel charge-transfer complexes of o-tolidine and p-toluidine with alternation pi-acceptors (3,5-dinitro benzoic acid and 2,6-dichloroquinone-4-chloroimide) in CHCl3 solvent.

The rapid interaction between o-tolidine and p-toluidine (pi-donors) with the pi-acceptors, e.g., 3,5-dinitrobenzoic acid (DNB) and 2,6-dichloroquinone-4-chloroimide (DCQ) results in the formation of 1:1 charge-transfer complexes as the final products, [(o-tolidine) (acceptor)] and [(p-toluidine) (acceptor)]. The final products of the reactions have been isolated and characterized using FTIR, 1HNMR spectroscopy and elemental analysis as well as photometric titration. The stoichiometry and apparent formation constants of the complexes formed were determined by applying the conventional spectrophotometric molar ratio method.

Benzidines↗