Search PubMed⌕ Search

PubMed · 9306675

Maternal and foetal ECG separation using blind source separation methods.

Abstract

The separation of the maternal and foetal electrocardiograms (ECGs) from skin electrodes located on the mother's body may be modelled as a blind source separation (BSS) problem. This consists in the reconstruction of a set of unknown mutually independent source signals from the sole knowledge of another set of linear mixtures of the sources, where the mixture pattern is also unknown. Three BSS methods based on cumulants are considered: principal-component analysis (PCA), higher-order singular-value decomposition (HOSVD), and higher-order eigenvalue decomposition (HOEVD). All these methods are applied to the foetal-ECG extraction problem by using real ECG data. The last two methods appear to provide a more satisfactory separation than the first method, with HOEVD offering slightly better results.

Explore related subjects

Keep this discovery

Explore connections, maps & timelines

BibTeXRIS

V Zarzoso, A K Nandi, E Bacharakis. 1997. Maternal and foetal ECG separation using blind source separation methods.. https://pubmed.ncbi.nlm.nih.gov/9306675/

Cite the original work for its findings. Save a collection to share your selection of sources.

KEEP EXPLORING

Related citations

Optimal design of non-Newtonian, micro-scale viscous pumps for biomedical devices.

The present paper addresses the numerical optimization of geometrical parameters of non-Newtonian micro-scale viscous pumps for biomedical devices. The objective is to maximize the mass flow rate per unit of shaft power consumed by the rotor when an external pressure load is applied along the channel that houses the rotor. Two geometric parameters are considered in the optimization process: (i) the height of the channel that houses the rotor (H) and (ii), the eccentricity (epsilon) of the rotor. Three different micro-scale viscous pump configurations were tested: a straight-housed pump (I-shaped housing) and two curved housed pumps (L- and U-shaped housings). The stress-strain constitutive law is modeled by a power-law relation. The results show that the geometric optimization of micro-scale viscous pumps is critical since the mass flow rate propelled by the rotor is highly dependent on epsilon and H. Numerical simulations indicate that mass flow rate is maximized when epsilon approximately 0, namely when the rotor is placed at a distance of 0.05 radii from the lower wall. The results also show that micro-scale viscous pumps with curved housing provide higher mass flow rate per unit of shaft power consumed when compared with straight-housed pumps. The results are presented in terms optimized dimensions of all three configurations (i.e., H(opt) and epsilon(opt)) and for values of the power-law index varying between 0.5 (shear thinning fluids) and 1.5 (shear-thickening fluids).

Biomedical Engineering↗